[SEBA-434] Replacing omci-sim with omci-lib-go
Change-Id: I499afc9ec49bb483467ea93bd6ce3077dd0ccc6e
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/pseudowiremaintenanceprofile.go b/vendor/github.com/opencord/omci-lib-go/generated/pseudowiremaintenanceprofile.go
new file mode 100644
index 0000000..65d5b89
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/pseudowiremaintenanceprofile.go
@@ -0,0 +1,162 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// PseudowireMaintenanceProfileClassID is the 16-bit ID for the OMCI
+// Managed entity Pseudowire maintenance profile
+const PseudowireMaintenanceProfileClassID ClassID = ClassID(284)
+
+var pseudowiremaintenanceprofileBME *ManagedEntityDefinition
+
+// PseudowireMaintenanceProfile (class ID #284)
+// The pseudowire maintenance profile permits the configuration of pseudowire service exception
+// handling. It is created and deleted by the OLT.
+//
+// The settings, and indeed existence, of a pseudowire maintenance profile affect the behaviour of
+// the pseudowire PM history data ME only in establishing criteria for counting SESs, but in no
+// other way. The pseudowire maintenance profile primarily affects the alarms declared by the
+// subscribing pseudowire TP.
+//
+// Relationships
+// One or more instances of the pseudowire TP may point to an instance of the pseudowire
+// maintenance profile. If the pseudowire TP does not refer to a pseudowire maintenance profile,
+// the ONU's default exception handling is implied.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. The value 0 is
+// reserved. (R, setbycreate) (mandatory) (2-bytes)
+//
+// Jitter Buffer Maximum Depth
+// Jitter buffer maximum depth: This attribute specifies the desired maximum depth of the playout
+// buffer in the PSN to the TDM direction. The value is expressed as a multiple of the 125-vs frame
+// rate. The default value 0 selects the ONU's internal policy. (R,-W, setbycreate) (optional)
+// (2-bytes)
+//
+// Jitter Buffer Desired Depth
+// Jitter buffer desired depth: This attribute specifies the desired nominal fill depth of the
+// playout buffer in the PSN to the TDM direction. The value is expressed as a multiple of the
+// 125-vs frame rate. The default value 0 selects the ONU's internal policy. (R,-W, setbycreate)
+// (optional) (2-bytes)
+//
+// Fill Policy
+// (R,-W, setbycreate) (optional) (1-byte)
+//
+// Misconnected Packets Declaration Policy
+// Misconnected packets declaration policy: (R,-W, setbycreate) (optional) (1-byte)
+//
+// Misconnected Packets Clear Policy
+// Misconnected packets clear policy: (R,-W, setbycreate) (optional) (1-byte)
+//
+// Loss Of Packets Declaration Policy
+// Loss of packets declaration policy: (R,-W, setbycreate) (optional) (1-byte)
+//
+// Loss Of Packets Clear Policy
+// Loss of packets clear policy: (R,-W, setbycreate) (optional) (1-byte)
+//
+// Buffer Overrun_Underrun Declaration Policy
+// Buffer overrun/underrun declaration policy: (R,-W, setbycreate) (optional) (1-byte)
+//
+// Buffer Overrun_Underrun Clear Policy
+// Buffer overrun/underrun clear policy: (R,-W, setbycreate) (optional) (1-byte)
+//
+// Malformed Packets Declaration Policy
+// Malformed packets declaration policy: (R,-W, setbycreate) (optional) (1-byte)
+//
+// Malformed Packets Clear Policy
+// Malformed packets clear policy: (R,-W, setbycreate) (optional) (1-byte)
+//
+// R_Bit Transmit Set Policy
+// R-bit transmit set policy: This attribute defines the number of consecutive lost packets that
+// causes the transmitted R bit to be set in the TDM to the PSN direction, indicating lost packets
+// to the far end. The default value 0 selects the ONU's internal policy. (R,-W, setbycreate)
+// (optional) (1-byte)
+//
+// R_Bit Transmit Clear Policy
+// R-bit transmit clear policy: This attribute defines the number of consecutive valid packets that
+// causes the transmitted R bit to be cleared in the TDM to the PSN direction, removing the remote
+// failure indication to the far end. The default value 0 selects the ONU's internal policy. (R,-W,
+// setbycreate) (optional) (1-byte)
+//
+// R_Bit Receive Policy
+// (R,-W, setbycreate) (optional) (1-byte)
+//
+// L Bit Receive Policy
+// (R,-W, setbycreate) (optional) (1-byte)
+//
+// Ses Threshold
+// SES threshold: Number of lost, malformed or otherwise unusable packets expected in the PSN to
+// the TDM direction within a 1-s interval that causes an SES to be counted. Stray packets do not
+// count towards an SES, nor do packets whose L bit is set at the far end. The value 0 specifies
+// that the ONU uses its internal default, which is not necessarily the same as the recommended
+// default value 3. (R, W, set-by-create) (optional) (2 bytes)
+//
+type PseudowireMaintenanceProfile struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ pseudowiremaintenanceprofileBME = &ManagedEntityDefinition{
+ Name: "PseudowireMaintenanceProfile",
+ ClassID: 284,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xffff,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: Uint16Field("JitterBufferMaximumDepth", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 1),
+ 2: Uint16Field("JitterBufferDesiredDepth", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 2),
+ 3: ByteField("FillPolicy", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 3),
+ 4: ByteField("MisconnectedPacketsDeclarationPolicy", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 4),
+ 5: ByteField("MisconnectedPacketsClearPolicy", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5),
+ 6: ByteField("LossOfPacketsDeclarationPolicy", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 6),
+ 7: ByteField("LossOfPacketsClearPolicy", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 7),
+ 8: ByteField("BufferOverrunUnderrunDeclarationPolicy", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 8),
+ 9: ByteField("BufferOverrunUnderrunClearPolicy", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 9),
+ 10: ByteField("MalformedPacketsDeclarationPolicy", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 10),
+ 11: ByteField("MalformedPacketsClearPolicy", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 11),
+ 12: ByteField("RBitTransmitSetPolicy", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 12),
+ 13: ByteField("RBitTransmitClearPolicy", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 13),
+ 14: ByteField("RBitReceivePolicy", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 14),
+ 15: ByteField("LBitReceivePolicy", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 15),
+ 16: Uint16Field("SesThreshold", UnsignedIntegerAttributeType, 0x0001, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 16),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewPseudowireMaintenanceProfile (class ID 284) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewPseudowireMaintenanceProfile(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*pseudowiremaintenanceprofileBME, params...)
+}