[SEBA-434] Replacing omci-sim with omci-lib-go
Change-Id: I499afc9ec49bb483467ea93bd6ce3077dd0ccc6e
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/pwatmconfigurationdata.go b/vendor/github.com/opencord/omci-lib-go/generated/pwatmconfigurationdata.go
new file mode 100644
index 0000000..84fa584
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/pwatmconfigurationdata.go
@@ -0,0 +1,120 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// PwAtmConfigurationDataClassID is the 16-bit ID for the OMCI
+// Managed entity PW ATM configuration data
+const PwAtmConfigurationDataClassID ClassID = ClassID(337)
+
+var pwatmconfigurationdataBME *ManagedEntityDefinition
+
+// PwAtmConfigurationData (class ID #337)
+// This ME contains generic configuration data for an ATM pseudowire. Definitions of attributes are
+// from PW-ATM-MIB [IETF RFC 5605]. Instances of this ME are created and deleted by the OLT.
+//
+// Relationships
+// An instance of this ME is associated with an instance of the MPLS pseudowire TP ME with a
+// pseudowire type attribute equal to one of the following.//// 2 ATM AAL5 SDU VCC transport//// 3 ATM transparent cell transport//// 9 ATM n-to-one VCC cell transport//// 10 ATM n-to-one VPC cell transport//// 12 ATM one-to-one VCC cell mode//// 13 ATM one-to-one VPC cell mode//// 14 ATM AAL5 PDU VCC transport//// Alternatively, an instance of this ME may be associated with an Ethernet flow TP or a TCP/UDP
+// config data ME, depending on the transport layer of the pseudowire.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. (R,
+// setbycreate)-(mandatory) (2 bytes)
+//
+// Tp Type
+// 2 TCP/UDP config data
+//
+// Transport Tp Pointer
+// Transport TP pointer: This attribute points to an associated instance of the transport layer TP,
+// whose type is specified by the TP type attribute. (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Pptp Atm Uni Pointer
+// PPTP ATM UNI pointer: This attribute points to an associated instance of the ITU-T G.983.2 PPTP
+// ATM UNI. Refer to [ITUT G.983.2] for the definition of the target ME. (R, W, setbycreate)
+// (mandatory) (2 bytes)
+//
+// Max C Ell C Oncatenation
+// Max cell concatenation: This attribute specifies the maximum number of ATM cells that can be
+// concatenated into one PW packet in the upstream direction. (R, W, setbycreate) (mandatory) (2
+// bytes)
+//
+// Far End M Ax C Ell C Oncatenation
+// Far-end max cell concatenation: This attribute specifies the maximum number of ATM cells that
+// can be concatenated into one PW packet as provisioned at the far end. This attribute may be used
+// for error checking of downstream traffic. The value 0 specifies that the ONU uses its internal
+// default. (R, W, set-by-create) (optional) (2 bytes)
+//
+// Atm Cell Loss Priority Clp Qos Mapping
+// The value 0 specifies that the ONU uses its internal default. (R, W, setbycreate) (optional) (1
+// byte)
+//
+// Timeout Mode
+// The value 0 specifies that the ONU uses its internal default. (R, W, setbycreate) (optional) (1
+// byte)
+//
+// Pw Atm Mapping Table
+// (R,-W) (mandatory) (21N bytes, where N is the number of entries in the list)
+//
+type PwAtmConfigurationData struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ pwatmconfigurationdataBME = &ManagedEntityDefinition{
+ Name: "PwAtmConfigurationData",
+ ClassID: 337,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ GetNext,
+ Set,
+ ),
+ AllowedAttributeMask: 0xff00,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: ByteField("TpType", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+ 2: Uint16Field("TransportTpPointer", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 2),
+ 3: Uint16Field("PptpAtmUniPointer", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
+ 4: Uint16Field("MaxCEllCOncatenation", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
+ 5: Uint16Field("FarEndMAxCEllCOncatenation", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5),
+ 6: ByteField("AtmCellLossPriorityClpQosMapping", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 6),
+ 7: ByteField("TimeoutMode", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 7),
+ 8: TableField("PwAtmMappingTable", TableAttributeType, 0x0100, TableInfo{nil, 21}, mapset.NewSetWith(Read, Write), false, false, false, 8),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewPwAtmConfigurationData (class ID 337) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewPwAtmConfigurationData(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*pwatmconfigurationdataBME, params...)
+}