[SEBA-434] Replacing omci-sim with omci-lib-go
Change-Id: I499afc9ec49bb483467ea93bd6ce3077dd0ccc6e
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/rtpprofiledata.go b/vendor/github.com/opencord/omci-lib-go/generated/rtpprofiledata.go
new file mode 100644
index 0000000..6d1330e
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/rtpprofiledata.go
@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// RtpProfileDataClassID is the 16-bit ID for the OMCI
+// Managed entity RTP profile data
+const RtpProfileDataClassID ClassID = ClassID(143)
+
+var rtpprofiledataBME *ManagedEntityDefinition
+
+// RtpProfileData (class ID #143)
+// This ME configures RTP. It is conditionally required for ONUs that offer VoIP service. If a non-
+// OMCI interface is used to manage VoIP, this ME is unnecessary.
+//
+// An instance of this ME is created and deleted by the OLT. An RTP profile is needed for each
+// unique set of attributes.
+//
+// Relationships
+// An instance of this ME may be associated with one or more VoIP media profile MEs.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. (R, setbycreate)
+// (mandatory) (2-bytes)
+//
+// Local Port Min
+// Local port min: This attribute defines the base UDP port that should be used by RTP for voice
+// traffic. The recommended default is 50000 (R,-W, set-by-create) (mandatory) (2-bytes)
+//
+// Local Port Max
+// Local port max: This attribute defines the highest UDP port used by RTP for voice traffic. The
+// value must be greater than the local port minimum. The value 0 specifies that the local port
+// maximum be equal to the local port minimum. (R,-W, set-by-create) (optional) (2-bytes)
+//
+// Dscp Mark
+// DSCP mark: Diffserv code point to be used for outgoing RTP packets for this profile. The
+// recommended default value is expedited forwarding (EF)-= 0x2E. (R,-W, setbycreate) (mandatory)
+// (1-byte)
+//
+// Piggyback Events
+// (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// Tone Events
+// (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// Dtmf Events
+// (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// Cas Events
+// (R,-W, setbycreate) (mandatory) (1-byte)
+//
+// Ip Host Config Pointer
+// IP host config pointer: This optional pointer associates the bearer (voice) flow with an IP host
+// config data or IPv6 host config data ME. If this attribute is not present or is not populated
+// with a valid pointer value, the bearer flow uses the same IP stack that is used for signalling,
+// indicated by the TCP/UDP pointer in the associated SIP agent or MGC config data. The default
+// value is 0xFFFF, a null pointer. (R,-W) (optional) (2-bytes)
+//
+type RtpProfileData struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ rtpprofiledataBME = &ManagedEntityDefinition{
+ Name: "RtpProfileData",
+ ClassID: 143,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xff00,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: Uint16Field("LocalPortMin", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 1),
+ 2: Uint16Field("LocalPortMax", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 2),
+ 3: ByteField("DscpMark", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 3),
+ 4: ByteField("PiggybackEvents", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 4),
+ 5: ByteField("ToneEvents", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 5),
+ 6: ByteField("DtmfEvents", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 6),
+ 7: ByteField("CasEvents", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 7),
+ 8: Uint16Field("IpHostConfigPointer", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, true, false, 8),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewRtpProfileData (class ID 143) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewRtpProfileData(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*rtpprofiledataBME, params...)
+}