[SEBA-434] Replacing omci-sim with omci-lib-go
Change-Id: I499afc9ec49bb483467ea93bd6ce3077dd0ccc6e
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/trafficdescriptor.go b/vendor/github.com/opencord/omci-lib-go/generated/trafficdescriptor.go
new file mode 100644
index 0000000..1a23f08
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/trafficdescriptor.go
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// TrafficDescriptorClassID is the 16-bit ID for the OMCI
+// Managed entity Traffic descriptor
+const TrafficDescriptorClassID ClassID = ClassID(280)
+
+var trafficdescriptorBME *ManagedEntityDefinition
+
+// TrafficDescriptor (class ID #280)
+// The traffic descriptor is a profile that allows for traffic management. A priority controlled
+// ONU can point from a MAC bridge port configuration data ME to a traffic descriptor in order to
+// implement traffic management (marking, policing). A rate controlled ONU can point to a traffic
+// descriptor from either a MAC bridge port configuration data ME or a GEM port network CTP to
+// implement traffic management (marking, shaping).
+//
+// Packets are determined to be green, yellow or red as a function of the ingress packet rate and
+// the settings in this ME. The colour indicates drop precedence (eligibility), subsequently used
+// by the priority queue ME to drop packets conditionally during congestion conditions. Packet
+// colour is also used by the optional mode 1 DBA status reporting function described in [ITUT
+// G.984.3]. Red packets are dropped immediately. Yellow packets are marked as drop eligible, and
+// green packets are marked as not drop eligible, according to the egress colour marking attribute.
+//
+// The algorithm used to determine the colour marking is specified by the meter type attribute. If
+// [bIETF RFC 4115] is used, then:
+//
+// CIR4115-=-CIR
+//
+// EIR4115-=-PIR - CIR (EIR: excess information rate)
+//
+// CBS4115-=-CBS
+//
+// EBS4115-=-PBS - CBS.
+//
+// Relationships
+// This ME is associated with a GEM port network CTP or a MAC bridge port configuration data ME.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. (R, setbycreate)
+// (mandatory) (2-bytes)
+//
+// Cir
+// CIR: This attribute specifies the committed information rate, in bytes per second. The default
+// is 0. (R,-W, setbycreate) (optional) (4-bytes)
+//
+// Pir
+// PIR: This attribute specifies the peak information rate, in bytes per second. The default value
+// 0 accepts the ONU's factory policy. (R,-W, setbycreate) (optional) (4-bytes)
+//
+// Cbs
+// CBS: This attribute specifies the committed burst size, in bytes. The default is 0. (R,-W,
+// setbycreate) (optional) (4-bytes)
+//
+// Pbs
+// PBS: This attribute specifies the peak burst size, in bytes. The default value 0 accepts the
+// ONU's factory policy. (R,-W, setbycreate) (optional) (4-bytes)
+//
+// Colour Mode
+// (R,-W, setbycreate) (optional) (1-byte)
+//
+// Ingress Colour Marking
+// (R,-W, setbycreate) (optional) (1-byte)
+//
+// Egress Colour Marking
+// (R,-W, setbycreate) (optional) (1-byte)
+//
+// Meter Type
+// (R, setbycreate) (optional) (1-byte)
+//
+type TrafficDescriptor struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ trafficdescriptorBME = &ManagedEntityDefinition{
+ Name: "TrafficDescriptor",
+ ClassID: 280,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xff00,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: Uint32Field("Cir", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 1),
+ 2: Uint32Field("Pir", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 2),
+ 3: Uint32Field("Cbs", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 3),
+ 4: Uint32Field("Pbs", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 4),
+ 5: ByteField("ColourMode", EnumerationAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5),
+ 6: ByteField("IngressColourMarking", EnumerationAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 6),
+ 7: ByteField("EgressColourMarking", EnumerationAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 7),
+ 8: ByteField("MeterType", EnumerationAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate), false, true, false, 8),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewTrafficDescriptor (class ID 280) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewTrafficDescriptor(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*trafficdescriptorBME, params...)
+}