[SEBA-434] Replacing omci-sim with omci-lib-go
Change-Id: I499afc9ec49bb483467ea93bd6ce3077dd0ccc6e
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/vdsl2lineinventoryandstatusdatapart2.go b/vendor/github.com/opencord/omci-lib-go/generated/vdsl2lineinventoryandstatusdatapart2.go
new file mode 100644
index 0000000..2cb56d8
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/vdsl2lineinventoryandstatusdatapart2.go
@@ -0,0 +1,157 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// Vdsl2LineInventoryAndStatusDataPart2ClassID is the 16-bit ID for the OMCI
+// Managed entity VDSL2 line inventory and status data part 2
+const Vdsl2LineInventoryAndStatusDataPart2ClassID ClassID = ClassID(169)
+
+var vdsl2lineinventoryandstatusdatapart2BME *ManagedEntityDefinition
+
+// Vdsl2LineInventoryAndStatusDataPart2 (class ID #169)
+// This ME extends the xDSL line configuration MEs. The ME name was chosen because its attributes
+// were initially unique to ITU-T G.993.2 VDSL2. Due to continuing standards development, some
+// attributes - and therefore this ME - have also become applicable to other Recommendations,
+// specifically [ITU-T G.992.3] and [ITU-T G.992.5].
+//
+// This ME contains upstream attributes.
+//
+// Relationships
+// This is one of the status data MEs associated with an xDSL UNI. It is meaningful if the PPTP
+// supports [ITU-T G.992.3], [ITU-T G.992.5] or [ITU-T G.993.2]. The ONU automatically creates or
+// deletes an instance of this ME upon creation and deletion of a PPTP xDSL UNI part 1 that
+// supports these attributes.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
+// identical ID, this ME is implicitly linked to an instance of the PPTP xDSL UNI part 1 ME. (R)
+// (mandatory) (2-bytes)
+//
+// Vdsl2 Transmission System Capability Xtu_R
+// VDSL2 transmission system capability xTU-R: This attribute extends the xTU-R transmission system
+// capability attribute of the xDSL line inventory and status data part 1 to include xTUR VDSL2
+// capabilities. It is a defined by bits 57..64 of Table 9.7.12-1. (R) (mandatory) (1-byte)
+//
+// Actsnrmodeus
+// (R) (mandatory) (1-byte)
+//
+// Upbokle
+// UPBOKLE: This attribute contains the electrical length estimated by the VTU-O expressed in
+// decibels at 1-MHz, kl0 (see O-UPDATE in clause 12.3.3.2.1.2 of [ITUT-G.993.2]). This is the
+// final electrical length that would have been sent from the VTU-O to the VTU-R if the electrical
+// length were not forced by the OLT. The value lies in the range 0 (0.0-dB) to 1280 (128.0-dB) (R)
+// (mandatory) (2-bytes)
+//
+// Hlingus
+// HLINGus: This attribute is the number of subcarriers per group used to report HLINpsus. (R)
+// (mandatory) (1-byte)
+//
+// Hloggus
+// HLOGGus: This attribute is the number of subcarriers per group used to report HLOGpsus. (R)
+// (mandatory) (1-byte)
+//
+// Qlngus
+// QLNGus: This attribute is the number of subcarriers per group used to report QLNpsus. (R)
+// (mandatory) (1-byte)
+//
+// Snrgus
+// SNRGus: This attribute is the number of subcarriers per group used to report SNRpsus. (R)
+// (mandatory) (1-byte)
+//
+// Mrefpsdus Table
+// (R) (mandatory) (3 * N bytes, where N is the number of breakpoints)
+//
+// Trellisus
+// (R) (mandatory for ITU-T G.993.2 VDSL2, optional for others) (1-byte)
+//
+// Actualce
+// ACTUALCE: This attribute reports the cyclic extension used on the line. It is coded as an
+// unsigned integer from 2 to 16 in units of N/32 samples, where 2N is the IDFT size. (R)
+// (mandatory) (1-byte)
+//
+// Upbokle_R
+// UPBOKLE-R: This attribute contains the electrical length estimated by the VTU-R expressed in
+// decibels at 1-MHz. This is the value contained in the message RMSG1 (see clause 12.3.3.2.2.1of
+// [ITUT G.993.2]). Its value lies in the range 0 (0.0-dB) to 1280 (128.0-dB) (R) (optional)
+// (2-bytes)
+//
+// Actual Rate Adaptation Mode Upstream
+// (R) (optional) (1-byte)
+//
+// Actual Impulse Noise Protection Roc Upstream
+// Actual impulse noise protection ROC upstream: The ACTINP-ROC-us attribute reports the actual INP
+// of the ROC in the upstream direction expressed in multiples of T4k. The INP of this attribute is
+// equal to the integer value multiplied by 0.1 symbols. Valid values and usage are given in clause
+// 7.5.1.34.2 of [ITUT-G.997.1]. (R) (optional) (1-byte)
+//
+// Snr Margin Roc Upstream
+// SNR margin ROC upstream: The SNRM-ROC-us attribute reports the actual signal-to-noise margin of
+// the ROC in the upstream direction. Its value ranges from 0 (-64.0-dB) to 1270 (+63.0-dB). The
+// special value 0xFFFF indicates that the attribute is out of range. (R) (optional) (2-bytes)
+//
+type Vdsl2LineInventoryAndStatusDataPart2 struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ vdsl2lineinventoryandstatusdatapart2BME = &ManagedEntityDefinition{
+ Name: "Vdsl2LineInventoryAndStatusDataPart2",
+ ClassID: 169,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ GetNext,
+ ),
+ AllowedAttributeMask: 0xfffc,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: ByteField("Vdsl2TransmissionSystemCapabilityXtuR", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
+ 2: ByteField("Actsnrmodeus", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2),
+ 3: Uint16Field("Upbokle", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read), false, false, false, 3),
+ 4: ByteField("Hlingus", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read), false, false, false, 4),
+ 5: ByteField("Hloggus", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read), false, false, false, 5),
+ 6: ByteField("Qlngus", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read), false, false, false, 6),
+ 7: ByteField("Snrgus", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read), false, false, false, 7),
+ 8: TableField("MrefpsdusTable", TableAttributeType, 0x0100, TableInfo{nil, 3}, mapset.NewSetWith(Read), false, false, false, 8),
+ 9: ByteField("Trellisus", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read), false, false, false, 9),
+ 10: ByteField("Actualce", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read), false, false, false, 10),
+ 11: Uint16Field("UpbokleR", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read), false, true, false, 11),
+ 12: ByteField("ActualRateAdaptationModeUpstream", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read), false, true, false, 12),
+ 13: ByteField("ActualImpulseNoiseProtectionRocUpstream", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read), false, true, false, 13),
+ 14: Uint16Field("SnrMarginRocUpstream", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, true, false, 14),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ }
+}
+
+// NewVdsl2LineInventoryAndStatusDataPart2 (class ID 169) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewVdsl2LineInventoryAndStatusDataPart2(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*vdsl2lineinventoryandstatusdatapart2BME, params...)
+}