[SEBA-434] Replacing omci-sim with omci-lib-go
Change-Id: I499afc9ec49bb483467ea93bd6ce3077dd0ccc6e
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/xdslchannelconfigurationprofilepart2.go b/vendor/github.com/opencord/omci-lib-go/generated/xdslchannelconfigurationprofilepart2.go
new file mode 100644
index 0000000..1552ea0
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/xdslchannelconfigurationprofilepart2.go
@@ -0,0 +1,176 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// XdslChannelConfigurationProfilePart2ClassID is the 16-bit ID for the OMCI
+// Managed entity xDSL channel configuration profile part 2
+const XdslChannelConfigurationProfilePart2ClassID ClassID = ClassID(412)
+
+var xdslchannelconfigurationprofilepart2BME *ManagedEntityDefinition
+
+// XdslChannelConfigurationProfilePart2 (class ID #412)
+// This ME contains the channel configuration profile for an xDSL UNI. An instance of this ME is
+// created and deleted by the OLT.
+//
+// NOTE - If [ITUT G.997.1] compatibility is required, bit rates should only be set to integer
+// multiples of 1000-bits/s. The ONU may reject attempts to set other values for bit rate
+// attributes.
+//
+// Relationships
+// An instance of this ME may be associated with zero or more instances of the PPTP xDSL UNI part
+// 1.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
+// identical ID, this ME is implicitly linked to an instance of the xDSL channel configuration
+// profile. (R, setbycreate) (mandatory) (2-bytes)
+//
+// Minimum Expected Throughput For Retransmission Minetr_Rtx
+// Minimum expected throughput for retransmission (MINETR_RTX): If retransmission is used in a
+// given transmit direction, this attribute specifies the minimum expected throughput for the
+// bearer channel, in bits per second. See clause 7.3.2.1.8 of [ITU-T G.997.1]. (R,-W) (mandatory)
+// (4-bytes)
+//
+// Maximum Expected Throughput For Retransmission Maxetr_Rtx
+// Maximum expected throughput for retransmission (MAXETR_RTX): If retransmission is used in a
+// given transmit direction, this parameter specifies the maximum expected throughput for the
+// bearer channel, in bits per second. See clause 7.3.2.1.9 of [ITU-T G.997.1]. (R,-W) (mandatory)
+// (4-bytes)
+//
+// Maximum Net Data Rate For Retransmission Maxndr_Rtx
+// Maximum net data rate for retransmission (MAXNDR_RTX): If retransmission is used in a given
+// transmit direction, this parameter specifies the maximum net data rate for the bearer channel,
+// in bits per second. See clause 7.3.2.1.10 of [ITUT-G.997.1]. (R,-W) (mandatory) (4-bytes)
+//
+// Maximum Delay For Retransmission Delaymax_Rtx
+// Maximum delay for retransmission (DELAYMAX_RTX): If retransmission is used in a given transmit
+// direction, this parameter specifies the maximum for the instantaneous delay due to the effect of
+// retransmission only. This delay is defined as the integer value of this attribute multiplied by
+// 1-ms. The valid delay values are given in clause 7.3.2.11 of [ITU-T G.997.1]. (R,-W) (mandatory)
+// (1-bytes)
+//
+// Minimum Delay For Retransmission Delaymin_Rtx
+// Minimum delay for retransmission (DELAYMIN_RTX): If retransmission is used in a given transmit
+// direction, this parameter specifies the minimum for the instantaneous delay due to the effect of
+// retransmission only. This delay is defined as the integer value of this attribute multiplied by
+// 1 ms. The valid delay values are given in clause 7.3.2.12 of [ITU-T G.997.1]. (R,-W) (mandatory)
+// (1-bytes)
+//
+// Minimum Impulse Noise Protection Against Single High Impulse Noise Event Shine For Retransmission Inpmin_Shine_Rtx
+// Minimum impulse noise protection against single high impulse noise event (SHINE) for
+// retransmission (INPMIN_SHINE_RTX): If retransmission is used in a given transmit direction, this
+// parameter specifies the minimum INP against a SHINE for the bearer channel if it is transported
+// over DMT symbols with a subcarrier spacing of 4.3125-kHz. The valid range of values is given in
+// clause-7.3.2.13 of [ITU-T G.997.1]. (R,-W) (mandatory) (1-bytes)
+//
+// Minimum Impulse Noise Protection Against Shine For Retransmission For Systems Using 8.625 Khz Subcarrier Spacing Inpmin8_Shine_Rtx
+// Minimum impulse noise protection against SHINE for retransmission for systems using 8.625 kHz
+// subcarrier spacing (INPMIN8_SHINE_RTX): If retransmission is used in a given transmit direction,
+// this parameter specifies the minimum INP against SHINE for the bearer channel if it is
+// transported over DMT symbols with a subcarrier spacing of 8.625-kHz. The valid range of values
+// is given in clause 7.3.2.14 of [ITUT-G.997.1]. (R,-W) (mandatory) (1-bytes)
+//
+// Shineratio_Rtx
+// SHINERATIO_RTX: If retransmission is used in a given transmit direction, this parameter
+// specifies the SHINE ratio. This ratio is defined as the integer value of this attribute
+// multiplied by 0.001. The valid range of values is given in clause-7.3.2.15 of [ITU-T G.997.1].
+// (R,-W) (mandatory) (1-bytes)
+//
+// Minimum Impulse Noise Protection Against Rein For Retransmission Inpmin_Rein_Rtx
+// Minimum impulse noise protection against REIN for retransmission (INPMIN_REIN_RTX): If
+// retransmission is used in a given transmit direction, this parameter specifies the minimum INP
+// against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier
+// spacing of 4.3125 kHz. The valid range of values is given in clause-7.3.2.16 of [ITU-T G.997.1].
+// (R,-W) (mandatory) (1-bytes)
+//
+// Minimum Impulse Noise Protection Against Rein For Retransmission For Systems Using 8.625_Khz Subcarrier Spacing Inpmin8_Rein_Rtx
+// Minimum impulse noise protection against REIN for retransmission for systems using 8.625-kHz
+// subcarrier spacing (INPMIN8_REIN_RTX): If retransmission is used in a given transmit direction,
+// this parameter specifies the minimum INP against REIN for the bearer channel if it is
+// transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The valid range of values
+// is given in clause 7.3.2.17 of [ITU-T G.997.1]. (R,-W) (mandatory) (1-bytes)
+//
+// Rein Inter_Arrival Time For Retransmission Iat_Rein_Rtx
+// REIN inter-arrival time for retransmission (IAT_REIN_RTX): If retransmission is used in a given
+// transmit direction, this parameter specifies the IAT that shall be assumed for REIN protection.
+// The valid range of values is given in clause 7.3.2.18 of [ITU-T G.997.1]. (R,-W) (mandatory)
+// (1-bytes)
+//
+// Target Net Data Rate Target_Ndr
+// Target net data rate (TARGET_NDR): If retransmission is not used in a given transmit direction,
+// this parameter specifies the target net data of the bearer channel, in bits per second. See
+// clause 7.3.2.19.1 of [ITU-T G.997.1]. (R,-W) (mandatory) (4-bytes)
+//
+// Target Expected Throughput For Retransmission Target_Etr
+// Target expected throughput for retransmission (TARGET_ETR): If retransmission is used in a given
+// transmit direction, this parameter specifies the target expected throughput for the bearer
+// channel, in bits per second. See clause 7.3.2.19.2 of [ITUT-G.997.1]. (R,-W) (mandatory)
+// (4-bytes)
+//
+type XdslChannelConfigurationProfilePart2 struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ xdslchannelconfigurationprofilepart2BME = &ManagedEntityDefinition{
+ Name: "XdslChannelConfigurationProfilePart2",
+ ClassID: 412,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xfff8,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: Uint32Field("MinimumExpectedThroughputForRetransmissionMinetrRtx", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, Write), false, false, false, 1),
+ 2: Uint32Field("MaximumExpectedThroughputForRetransmissionMaxetrRtx", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, Write), false, false, false, 2),
+ 3: Uint32Field("MaximumNetDataRateForRetransmissionMaxndrRtx", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, Write), false, false, false, 3),
+ 4: ByteField("MaximumDelayForRetransmissionDelaymaxRtx", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, Write), false, false, false, 4),
+ 5: ByteField("MinimumDelayForRetransmissionDelayminRtx", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, Write), false, false, false, 5),
+ 6: ByteField("MinimumImpulseNoiseProtectionAgainstSingleHighImpulseNoiseEventShineForRetransmissionInpminShineRtx", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, Write), false, false, false, 6),
+ 7: ByteField("MinimumImpulseNoiseProtectionAgainstShineForRetransmissionForSystemsUsing8625KhzSubcarrierSpacingInpmin8ShineRtx", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, Write), false, false, false, 7),
+ 8: ByteField("ShineratioRtx", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, Write), false, false, false, 8),
+ 9: ByteField("MinimumImpulseNoiseProtectionAgainstReinForRetransmissionInpminReinRtx", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, Write), false, false, false, 9),
+ 10: ByteField("MinimumImpulseNoiseProtectionAgainstReinForRetransmissionForSystemsUsing8625KhzSubcarrierSpacingInpmin8ReinRtx", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, Write), false, false, false, 10),
+ 11: ByteField("ReinInterArrivalTimeForRetransmissionIatReinRtx", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, Write), false, false, false, 11),
+ 12: Uint32Field("TargetNetDataRateTargetNdr", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, Write), false, false, false, 12),
+ 13: Uint32Field("TargetExpectedThroughputForRetransmissionTargetEtr", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, Write), false, false, false, 13),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewXdslChannelConfigurationProfilePart2 (class ID 412) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewXdslChannelConfigurationProfilePart2(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*xdslchannelconfigurationprofilepart2BME, params...)
+}