[SEBA-434] Replacing omci-sim with omci-lib-go
Change-Id: I499afc9ec49bb483467ea93bd6ce3077dd0ccc6e
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/xdsllineconfigurationprofilepart2.go b/vendor/github.com/opencord/omci-lib-go/generated/xdsllineconfigurationprofilepart2.go
new file mode 100644
index 0000000..f2a62a7
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/xdsllineconfigurationprofilepart2.go
@@ -0,0 +1,183 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// XdslLineConfigurationProfilePart2ClassID is the 16-bit ID for the OMCI
+// Managed entity xDSL line configuration profile part 2
+const XdslLineConfigurationProfilePart2ClassID ClassID = ClassID(105)
+
+var xdsllineconfigurationprofilepart2BME *ManagedEntityDefinition
+
+// XdslLineConfigurationProfilePart2 (class ID #105)
+// The overall xDSL line configuration profile is modelled in several parts, all of which are
+// associated together through a common ME ID (the client PPTP xDSL UNI part 1 has a single
+// pointer, which refers to the entire set of line configuration profile parts).
+//
+// Relationships
+// An instance of this ME may be associated with zero or more instances of an xDSL UNI.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. All xDSL and
+// VDSL2 line configuration profiles and extensions that pertain to a given PPTP xDSL UNI must
+// share a common ME ID. (R, setbycreate) (mandatory) (2-bytes)
+//
+// Downstream Minimum Time Interval For Upshift Rate Adaptation
+// Downstream minimum time interval for upshift rate adaptation: This parameter defines the
+// interval during which the downstream noise margin must remain above the downstream upshift noise
+// margin before the xTU-R attempts to increase the downstream net data rate. Its value ranges from
+// 0 to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
+//
+// Upstream Minimum Time Interval For Upshift Rate Adaptation
+// Upstream minimum time interval for upshift rate adaptation: This parameter defines the interval
+// during which the upstream noise margin must remain above the upstream upshift noise margin
+// before the xTU-C attempts to increase the upstream net data rate. Its value ranges from 0 to
+// 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
+//
+// Downstream Downshift Noise Margin
+// Downstream downshift noise margin: If the downstream noise margin is below the downstream
+// downshift noise margin and remains there for more than the downstream minimum time interval for
+// downshift rate adaptation, the xTU-R attempts to decrease the downstream net data rate. This
+// attribute's value ranges from 0 (0.0 dB) to 310 (31.0 dB). (R,-W, setbycreate) (optional)
+// (2-bytes)
+//
+// Upstream Downshift Noise Margin
+// Upstream downshift noise margin: If the upstream noise margin is below the upstream downshift
+// noise margin and remains there for more than the upstream minimum time interval for downshift
+// rate adaptation, the xTUC attempts to decrease the upstream net data rate. This attribute's
+// value ranges from 0 (0.0 dB) to 310 (31.0 dB). (R,-W, setbycreate) (optional) (2-bytes)
+//
+// Downstream Minimum Time Interval For Downshift Rate Adaptation
+// Downstream minimum time interval for downshift rate adaptation: This parameter defines the
+// interval during which the downstream noise margin must remain below the downstream downshift
+// noise margin before the xTU-R attempts to decrease the downstream net data rate. Its value
+// ranges from 0 to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
+//
+// Upstream Minimum Time Interval For Downshift Rate Adaptation
+// Upstream minimum time interval for downshift rate adaptation: This parameter defines the
+// interval during which the upstream noise margin must remain below the upstream downshift noise
+// margin before the xTU-C attempts to decrease the upstream net data rate. Its value ranges from 0
+// to 16383-s. (R,-W, setbycreate) (optional) (2-bytes)
+//
+// Xtu Impedance State Forced
+// (R,-W, setbycreate) (optional) (1-byte)
+//
+// L0_Time
+// L0-time: This parameter specifies the minimum time between an exit from the L2 state and the
+// next entry into the L2 state. It is only valid for [ITUT-G.992.3], [ITUT-G.992.4] and
+// [ITUT-G.992.5]. It ranges from 0 to 255-s. (R,-W, setbycreate) (mandatory) (1 byte)
+//
+// L2_Time
+// L2-time: This parameter specifies the minimum time between an entry into the L2 state and the
+// first power trim in the L2 state, or between two consecutive power trims in the L2 state. It is
+// only valid for [ITUT-G.992.3], [ITUT-G.992.4] and [ITUT-G.992.5]. It ranges from 0 to 255-s. (R,
+// W, setbycreate) (mandatory) (1 byte)
+//
+// Downstream Maximum Nominal Power Spectral Density
+// Downstream maximum nominal power spectral density: This attribute specifies the maximum nominal
+// transmit PSD in the downstream direction during initialization and showtime. A single
+// MAXNOMPSDds attribute is defined per mode enabled in the xTSE line configuration attribute. It
+// is only valid for [ITUT-G.992.3], [ITUT-G.992.4] and [ITUT-G.992.5]. Its value ranges from 0
+// (60.0-dBm/Hz) to 300 (-30-dBm/Hz). (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Upstream Maximum Nominal Power Spectral Density
+// Upstream maximum nominal power spectral density: This attribute specifies the maximum nominal
+// transmit PSD in the upstream direction during initialization and showtime. A single MAXNOMPSDus
+// attribute is defined per mode enabled in the xTSE line configuration attribute. It is only valid
+// for [ITUT-G.992.3], [ITUT-G.992.4] and [ITUT-G.993.2]. Its value ranges from 0 (-60.0-dBm/Hz) to
+// 300 (-30-dBm/Hz). (R, W, setbycreate) (mandatory) (2 bytes)
+//
+// Downstream Maximum Nominal Aggregate Transmit Power
+// Downstream maximum nominal aggregate transmit power: This attribute specifies the maximum
+// nominal aggregate transmit power in the downstream direction during initialization and showtime.
+// It is only valid for [ITUT-G.992.3], [ITUT-G.992.4], [ITUT-G.992.5] and [ITUT-G.993.2]. Its
+// value ranges from 0 (0.0-dBm) to 255 (25.5-dBm). (R, W, setbycreate) (mandatory) (1-byte)
+//
+// Upstream Maximum Nominal Aggregate Transmit Power
+// Upstream maximum nominal aggregate transmit power: This parameter specifies the maximum nominal
+// aggregate transmit power in the upstream direction during initialization and showtime. It is
+// only valid for [ITUT-G.992.3], [ITUT-G.992.4] and [ITUT-G.992.5]. Its value ranges from 0
+// (0.0-dBm) to 255 (25.5-dBm). (R, W, setbycreate) (mandatory) (1 byte)
+//
+// Upstream Maximum Aggregate_Receive Power
+// Upstream maximum aggregate-receive power: This parameter specifies the maximum upstream
+// aggregate receive power over a set of subcarriers, as defined in the relevant Recommendation.
+// The xTU-C requests an upstream power cutback such that the upstream aggregate receive power over
+// that set of subcarriers is at or below the configured maximum value. It is only valid for
+// [ITUT-G.992.3], [ITUT-G.992.4] and [ITUT-G.992.5]. This attribute ranges from 0 (25.5-dBm) to
+// 510 (+25.5-dBm). The special value 0xFFFF indicates that no upstream maximum aggregate receive
+// power limit is to be applied. (R, W setbycreate) (mandatory) (2 bytes)
+//
+// Vdsl2 Transmission System Enabling
+// VDSL2 transmission system enabling: This configuration attribute extends the transmission system
+// coding types to be allowed by the xTU-C. It is a bit map, defined as octet 8 (bits 57..64) in
+// Table-9.7.12-1. (R, W, setbycreate) (optional) (1 byte)
+//
+type XdslLineConfigurationProfilePart2 struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ xdsllineconfigurationprofilepart2BME = &ManagedEntityDefinition{
+ Name: "XdslLineConfigurationProfilePart2",
+ ClassID: 105,
+ MessageTypes: mapset.NewSetWith(
+ Create,
+ Delete,
+ Get,
+ Set,
+ ),
+ AllowedAttributeMask: 0xfffe,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, 0),
+ 1: Uint16Field("DownstreamMinimumTimeIntervalForUpshiftRateAdaptation", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 1),
+ 2: Uint16Field("UpstreamMinimumTimeIntervalForUpshiftRateAdaptation", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 2),
+ 3: Uint16Field("DownstreamDownshiftNoiseMargin", UnsignedIntegerAttributeType, 0x2000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 3),
+ 4: Uint16Field("UpstreamDownshiftNoiseMargin", UnsignedIntegerAttributeType, 0x1000, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 4),
+ 5: Uint16Field("DownstreamMinimumTimeIntervalForDownshiftRateAdaptation", UnsignedIntegerAttributeType, 0x0800, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 5),
+ 6: Uint16Field("UpstreamMinimumTimeIntervalForDownshiftRateAdaptation", UnsignedIntegerAttributeType, 0x0400, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 6),
+ 7: ByteField("XtuImpedanceStateForced", UnsignedIntegerAttributeType, 0x0200, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 7),
+ 8: ByteField("L0Time", UnsignedIntegerAttributeType, 0x0100, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 8),
+ 9: ByteField("L2Time", UnsignedIntegerAttributeType, 0x0080, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 9),
+ 10: Uint16Field("DownstreamMaximumNominalPowerSpectralDensity", UnsignedIntegerAttributeType, 0x0040, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 10),
+ 11: Uint16Field("UpstreamMaximumNominalPowerSpectralDensity", UnsignedIntegerAttributeType, 0x0020, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 11),
+ 12: ByteField("DownstreamMaximumNominalAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0010, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 12),
+ 13: ByteField("UpstreamMaximumNominalAggregateTransmitPower", UnsignedIntegerAttributeType, 0x0008, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, 13),
+ 14: Uint16Field("UpstreamMaximumAggregateReceivePower", UnsignedIntegerAttributeType, 0x0004, 0, mapset.NewSetWith(Read), false, false, false, 14),
+ 15: ByteField("Vdsl2TransmissionSystemEnabling", UnsignedIntegerAttributeType, 0x0002, 0, mapset.NewSetWith(Read, SetByCreate, Write), false, true, false, 15),
+ },
+ Access: CreatedByOlt,
+ Support: UnknownSupport,
+ }
+}
+
+// NewXdslLineConfigurationProfilePart2 (class ID 105) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewXdslLineConfigurationProfilePart2(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*xdsllineconfigurationprofilepart2BME, params...)
+}