[SEBA-434] Replacing omci-sim with omci-lib-go
Change-Id: I499afc9ec49bb483467ea93bd6ce3077dd0ccc6e
diff --git a/vendor/github.com/opencord/omci-lib-go/generated/xdsllineinventoryandstatusdatapart8.go b/vendor/github.com/opencord/omci-lib-go/generated/xdsllineinventoryandstatusdatapart8.go
new file mode 100644
index 0000000..19fe01b
--- /dev/null
+++ b/vendor/github.com/opencord/omci-lib-go/generated/xdsllineinventoryandstatusdatapart8.go
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2018 - present. Boling Consulting Solutions (bcsw.net)
+ * Copyright 2020-present Open Networking Foundation
+
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+
+ * http://www.apache.org/licenses/LICENSE-2.0
+
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ /*
+ * NOTE: This file was generated, manual edits will be overwritten!
+ *
+ * Generated by 'goCodeGenerator.py':
+ * https://github.com/cboling/OMCI-parser/README.md
+ */
+
+package generated
+
+import "github.com/deckarep/golang-set"
+
+// XdslLineInventoryAndStatusDataPart8ClassID is the 16-bit ID for the OMCI
+// Managed entity xDSL line inventory and status data part 8
+const XdslLineInventoryAndStatusDataPart8ClassID ClassID = ClassID(414)
+
+var xdsllineinventoryandstatusdatapart8BME *ManagedEntityDefinition
+
+// XdslLineInventoryAndStatusDataPart8 (class ID #414)
+// This ME extends the attributes defined in the xDSL line inventory and status data parts-1..4.
+//
+// Relationships
+// This is one of the status data MEs associated with an xDSL UNI. The ONU automatically creates or
+// deletes an instance of this ME upon creation or deletion of a PPTP xDSL UNI part 1 that supports
+// these attributes.
+//
+// Attributes
+// Managed Entity Id
+// Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
+// identical ID, this ME is implicitly linked to an instance of the PPTP xDSL UNI part 1 ME. (R)
+// (mandatory) (2-bytes)
+//
+// Retransmission Used Downstream Rtx_Usedds
+// Retransmission used downstream (RTX_USEDds): This parameter specifies whether [ITU-T G.998.4]
+// retransmission is used (i.e., active in showtime) in the downstream transmit direction. The
+// valid range of values is given in clause-7.5.1.38 of [ITU-T G.997.1]. (R) (mandatory) (1 byte)
+//
+// Retransmission Used Upstream Rtx_Usedus
+// Retransmission used upstream (RTX_USEDus): This parameter specifies whether [ITUT G.998.4]
+// retransmission is used (i.e., active in showtime) in the upstream transmit direction. The valid
+// range of values is given in clause 7.5.1.38 of [ITU-T G.997.1]. (R) (mandatory) (1 byte)
+//
+// Date_Time_Stamping Of Near_End Test Parameters Stamp_Test_Ne
+// (R) (optional) (7-bytes)
+//
+// Date_Time_Stamping Of Far_End Test Parameters Stamp_Test_Fe
+// Date/time-stamping of far-end test parameters (STAMP-TEST-FE): This parameter indicates the
+// date/time when the far-end test parameters that can change during showtime were last updated.
+// See clause 7.5.1.36.4 of [ITUT-G.997.1]. The format of this parameter is the same as STAMP-TEST-
+// NE. (R) (optional) (7-bytes)
+//
+// Date_Time_Stamping Of Last Successful Downstream Olr Operation Stamp_Olr_Ds
+// Date/time-stamping of last successful downstream OLR operation (STAMP-OLR-ds): This parameter
+// indicates the date/time of the last successful OLR execution in the downstream direction that
+// has modified the bits or gains. See clause-7.5.1.37.1 of [ITU-T G.997.1]. The format of this
+// parameter is the same as STAMP-TEST-NE. (R) (optional) (7 bytes)
+//
+// Date_Time_Stamping Of Last Successful Upstream Olr Operation Stamp_Olr_Us
+// Date/time-stamping of last successful upstream OLR operation (STAMP-OLR-us): This parameter
+// indicates the date/time of the last successful OLR execution in the upstream direction that has
+// modified the bits or gains. See clause-7.5.1.37.2 of [ITU-T G.997.1]. The format of this
+// parameter is the same as STAMP-TEST-NE. (R) (optional) (7 bytes)
+//
+type XdslLineInventoryAndStatusDataPart8 struct {
+ ManagedEntityDefinition
+ Attributes AttributeValueMap
+}
+
+func init() {
+ xdsllineinventoryandstatusdatapart8BME = &ManagedEntityDefinition{
+ Name: "XdslLineInventoryAndStatusDataPart8",
+ ClassID: 414,
+ MessageTypes: mapset.NewSetWith(
+ Get,
+ ),
+ AllowedAttributeMask: 0xfc00,
+ AttributeDefinitions: AttributeDefinitionMap{
+ 0: Uint16Field("ManagedEntityId", PointerAttributeType, 0x0000, 0, mapset.NewSetWith(Read), false, false, false, 0),
+ 1: ByteField("RetransmissionUsedDownstreamRtxUsedds", UnsignedIntegerAttributeType, 0x8000, 0, mapset.NewSetWith(Read), false, false, false, 1),
+ 2: ByteField("RetransmissionUsedUpstreamRtxUsedus", UnsignedIntegerAttributeType, 0x4000, 0, mapset.NewSetWith(Read), false, false, false, 2),
+ 3: MultiByteField("DateTimeStampingOfNearEndTestParametersStampTestNe", OctetsAttributeType, 0x2000, 7, toOctets("AAAAAAAAAA=="), mapset.NewSetWith(Read), false, true, false, 3),
+ 4: MultiByteField("DateTimeStampingOfFarEndTestParametersStampTestFe", OctetsAttributeType, 0x1000, 7, toOctets("AAAAAAAAAA=="), mapset.NewSetWith(Read), false, true, false, 4),
+ 5: MultiByteField("DateTimeStampingOfLastSuccessfulDownstreamOlrOperationStampOlrDs", OctetsAttributeType, 0x0800, 7, toOctets("AAAAAAAAAA=="), mapset.NewSetWith(Read), false, true, false, 5),
+ 6: MultiByteField("DateTimeStampingOfLastSuccessfulUpstreamOlrOperationStampOlrUs", OctetsAttributeType, 0x0400, 7, toOctets("AAAAAAAAAA=="), mapset.NewSetWith(Read), false, true, false, 6),
+ },
+ Access: CreatedByOnu,
+ Support: UnknownSupport,
+ }
+}
+
+// NewXdslLineInventoryAndStatusDataPart8 (class ID 414) creates the basic
+// Managed Entity definition that is used to validate an ME of this type that
+// is received from or transmitted to the OMCC.
+func NewXdslLineInventoryAndStatusDataPart8(params ...ParamData) (*ManagedEntity, OmciErrors) {
+ return NewManagedEntity(*xdsllineinventoryandstatusdatapart8BME, params...)
+}