/*
 * Copyright (c) 2018 - present.  Boling Consulting Solutions (bcsw.net)
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 * http://www.apache.org/licenses/LICENSE-2.0
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/*
 * NOTE: This file was generated, manual edits will be overwritten!
 *
 * Generated by 'goCodeGenerator.py':
 *              https://github.com/cboling/OMCI-parser/README.md
 */
package generated

import "github.com/deckarep/golang-set"

const XdslXtuCPerformanceMonitoringHistoryDataClassId ClassID = ClassID(112)

var xdslxtucperformancemonitoringhistorydataBME *ManagedEntityDefinition

// XdslXtuCPerformanceMonitoringHistoryData (class ID #112)
//	This ME collects PM data on the xTUC to xTUR path as seen from the xTU-C. Instances of this ME
//	are created and deleted by the OLT.
//
//	For a complete discussion of generic PM architecture, refer to clause I.4.
//
//	Relationships
//		An instance of this ME is associated with an xDSL UNI.
//
//	Attributes
//		Managed Entity Id
//			Managed entity ID: This attribute uniquely identifies each instance of this ME. Through an
//			identical ID, this ME is implicitly linked to an instance of the PPTP xDSL UNI part 1. (R,
//			setbycreate) (mandatory) (2 bytes)
//
//		Interval End Time
//			Interval end time: This attribute identifies the most recently finished 15 min interval. (R)
//			(mandatory) (1 byte)
//
//		Threshold Data 1_2 Id
//			Threshold data 1/2 ID: This attribute points to an instance of the threshold data 1 and 2 MEs
//			that contain PM threshold values. (R, W, setbycreate) (mandatory) (2 bytes)
//
//		Loss Of Frame Seconds
//			Loss of frame seconds: (R) (mandatory) (2 bytes)
//
//		Loss Of Signal Seconds
//			Loss of signal seconds: (R) (mandatory) (2 bytes)
//
//		Loss Of Link Seconds
//			Loss of link seconds: (R) (mandatory) (2 bytes)
//
//		Loss Of Power Seconds
//			Loss of power seconds: (R) (mandatory) (2 bytes)
//
//		Errored Seconds Es
//			Errored seconds (ES): This attribute counts 1 s intervals with one or more CRC8 anomalies summed
//			over all received bearer channels, or one or more loss of signal (LOS) defects, or one or more
//			SEF defects, or one or more LPR defects. (R) (mandatory) (2 bytes)
//
//		Severely Errored Seconds
//			(R) (mandatory) (2 bytes)
//
//		Line Initializations
//			Line initializations: This attribute counts the total number of full initializations attempted
//			on the line, both successful and failed. (R) (mandatory) (2 bytes)
//
//		Failed Line Initializations
//			Failed line initializations: This attribute counts the total number of failed full
//			initializations during the accumulation period. A failed full initialization occurs when
//			showtime is not reached at the end of the full initialization procedure. (R) (mandatory)
//			(2 bytes)
//
//		Short Initializations
//			Short initializations: This attribute counts the total number of fast retrains or short
//			initializations attempted on the line, successful and failed. Fast retrain is defined in [ITUT
//			G.992.2]. Short initialization is defined in [ITUT G.992.3] and [ITUT G.992.4]. (R) (optional)
//			(2 bytes)
//
//		Failed Short Initializations
//			(R) (optional) (2 bytes)
//
//		Fec Seconds
//			FEC seconds: This attribute counts seconds during which there was an FEC anomaly. (R)
//			(mandatory) (2 bytes)
//
//		Unavailable Seconds
//			Unavailable seconds: This attribute counts 1 s intervals during which the xDSL UNI is
//			unavailable. The line becomes unavailable at the onset of 10 contiguous SES-Ls. The 10 SES-Ls
//			are included in unavailable time. Once unavailable, the line becomes available at the onset of
//			10 contiguous seconds that are not severely errored. The 10 s with no SESLs are excluded from
//			unavailable time. Some attribute counts are inhibited during unavailability – see clause
//			7.2.7.13 of [ITUT G.997.1]. (R) (mandatory) (2 bytes)
//
//		Sos Success Count, Near End
//			SOS success count, near end: The SOS-SUCCESS-NE attribute is a count of the total number of
//			successful SOS procedures initiated by the near-end xTU on the line during the accumulation
//			period. Successful SOS is defined in clause 12.1.4 of [ITUT G.993.2]. (R) (optional) (2 bytes)
//
//		Sos Success Count, Far End
//			SOS success count, far end: The SOS-SUCCESS-FE attribute is a count of the total number of
//			successful SOS procedures initiated by the far-end xTU on the line during the accumulation
//			period. Successful SOS is defined in clause 12.1.4 of [ITUT G.993.2]. (R) (optional) (2 bytes)
//
type XdslXtuCPerformanceMonitoringHistoryData struct {
	ManagedEntityDefinition
	Attributes AttributeValueMap
}

func init() {
	xdslxtucperformancemonitoringhistorydataBME = &ManagedEntityDefinition{
		Name:    "XdslXtuCPerformanceMonitoringHistoryData",
		ClassID: 112,
		MessageTypes: mapset.NewSetWith(
			Create,
			Delete,
			Get,
			Set,
		),
		AllowedAttributeMask: 0XFFFF,
		AttributeDefinitions: AttributeDefinitionMap{
			0:  Uint16Field("ManagedEntityId", 0, mapset.NewSetWith(Read, SetByCreate), false, false, false, false, 0),
			1:  ByteField("IntervalEndTime", 0, mapset.NewSetWith(Read), false, false, false, false, 1),
			2:  Uint16Field("ThresholdData12Id", 0, mapset.NewSetWith(Read, SetByCreate, Write), false, false, false, false, 2),
			3:  Uint16Field("LossOfFrameSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 3),
			4:  Uint16Field("LossOfSignalSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 4),
			5:  Uint16Field("LossOfLinkSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 5),
			6:  Uint16Field("LossOfPowerSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 6),
			7:  Uint16Field("ErroredSecondsEs", 0, mapset.NewSetWith(Read), false, false, false, false, 7),
			8:  Uint16Field("SeverelyErroredSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 8),
			9:  Uint16Field("LineInitializations", 0, mapset.NewSetWith(Read), false, false, false, false, 9),
			10: Uint16Field("FailedLineInitializations", 0, mapset.NewSetWith(Read), false, false, false, false, 10),
			11: Uint16Field("ShortInitializations", 0, mapset.NewSetWith(Read), false, false, true, false, 11),
			12: Uint16Field("FailedShortInitializations", 0, mapset.NewSetWith(Read), false, false, true, false, 12),
			13: Uint16Field("FecSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 13),
			14: Uint16Field("UnavailableSeconds", 0, mapset.NewSetWith(Read), false, false, false, false, 14),
			15: Uint16Field("SosSuccessCount,NearEnd", 0, mapset.NewSetWith(Read), false, false, true, false, 15),
			16: Uint16Field("SosSuccessCount,FarEnd", 0, mapset.NewSetWith(Read), false, false, true, false, 16),
		},
	}
}

// NewXdslXtuCPerformanceMonitoringHistoryData (class ID 112 creates the basic
// Managed Entity definition that is used to validate an ME of this type that
// is received from the wire, about to be sent on the wire.
func NewXdslXtuCPerformanceMonitoringHistoryData(params ...ParamData) (*ManagedEntity, OmciErrors) {
	return NewManagedEntity(xdslxtucperformancemonitoringhistorydataBME, params...)
}