Initial set of Fabric switch test cases
Change-Id: I86fd2b67d3b773aa496f5ef61f1e1fdf51fd9925
diff --git a/Fabric/Utilities/acctonUseDpctl/allow_all_ucast_route.py b/Fabric/Utilities/acctonUseDpctl/allow_all_ucast_route.py
new file mode 100755
index 0000000..3e8d1c0
--- /dev/null
+++ b/Fabric/Utilities/acctonUseDpctl/allow_all_ucast_route.py
@@ -0,0 +1,83 @@
+
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+import logging
+import oftest.base_tests as base_tests
+from oftest import config
+from oftest.testutils import *
+from util import *
+from accton_util import convertIP4toStr as toIpV4Str
+from accton_util import convertMACtoStr as toMacStr
+"""
+ [Allow all VLAN and unicast route]
+ Whatever incoming VLAN tag, do unicast route and output to specified port
+
+ Inject eth 1/3 Tag3, SA000000112233, DA000000113355, SIP 192.168.1.100, DIP 192.168.2.2
+ Output eth 1/1 Tag2, SA 000004223355, DA 000004224466
+
+ dpctl tcp:192.168.1.1:6633 flow-mod table=10,cmd=add,prio=101 in_port=3,vlan_vid=0x1000/0x1000 goto:20
+ dpctl tcp:192.168.1.1:6633 flow-mod table=20,cmd=add,prio=201 in_port=3,eth_dst=00:00:00:11:33:55,eth_type=0x0800 goto:30
+ dpctl tcp:192.168.1.1:6633 group-mod cmd=add,type=ind,group=0x20001 group=any,port=any,weight=0 output=1
+ dpctl tcp:192.168.1.1:6633 group-mod cmd=add,type=ind,group=0x20000001 group=any,port=any,weight=0 set_field=eth_src=00:00:04:22:33:55,set_field=eth_dst=00:00:04:22:44:66,set_field=vlan_vid=2,group=0x20001
+ dpctl tcp:192.168.1.1:6633 flow-mod table=30,cmd=add,prio=301 eth_type=0x0800,ip_dst=192.168.2.2/255.255.255.0 write:group=0x20000001 goto:60
+ dpctl tcp:192.168.1.1:6633 group-mod cmd=add,type=ind,group=0x30003 group=any,port=any,weight=0 pop_vlan,output=3
+ dpctl tcp:192.168.1.1:6633 flow-mod table=50,cmd=add,prio=501 vlan_vid=3,eth_dst=00:00:00:11:22:33 write:group=0x30003 goto:60
+"""
+
+class test1(base_tests.SimpleDataPlane):
+ def runTest(self):
+ delete_all_flows(self.controller)
+ delete_all_groups(self.controller)
+
+ test_ports = sorted(config["port_map"].keys())
+ input_port = test_ports[0]
+ output_port = test_ports[1]
+
+ apply_dpctl_mod(self, config, "meter-mod cmd=del,meter=0xffffffff")
+ apply_dpctl_mod(self, config, "flow-mod table=10,cmd=add,prio=101 in_port="+str(input_port)+",vlan_vid=0x1000/0x1000 goto:20")
+ apply_dpctl_mod(self, config, "flow-mod table=20,cmd=add,prio=201 in_port="+str(input_port)+",eth_dst=00:00:00:11:33:55,eth_type=0x0800 goto:30")
+ apply_dpctl_mod(self, config, "group-mod cmd=add,type=ind,group=0x2000"+str(output_port)+" group=any,port=any,weight=0 output="+str(output_port))
+ apply_dpctl_mod(self, config, "group-mod cmd=add,type=ind,group=0x20000001 group=any,port=any,weight=0 set_field=eth_src=00:00:04:22:33:55,set_field=eth_dst=00:00:04:22:44:66,set_field=vlan_vid=2,group=0x2000"+str(output_port))
+ apply_dpctl_mod(self, config, "flow-mod table=30,cmd=add,prio=301 eth_type=0x0800,ip_dst=192.168.2.2/255.255.255.0 write:group=0x20000001 goto:60")
+ apply_dpctl_mod(self, config, "group-mod cmd=add,type=ind,group=0x3000"+str(input_port)+" group=any,port=any,weight=0 pop_vlan,output="+str(input_port))
+ apply_dpctl_mod(self, config, "flow-mod table=50,cmd=add,prio=501 vlan_vid=3,eth_dst=00:00:00:11:22:33 write:group=0x3000"+str(input_port)+" goto:60")
+
+ input_pkt = simple_packet(
+ '00 00 00 11 33 55 00 00 00 11 22 33 81 00 00 03 '
+ '08 00 45 00 00 52 00 01 00 00 40 06 f5 ee c0 a8 '
+ '01 64 c0 a8 02 02 04 d2 00 50 00 00 00 00 00 00 '
+ '00 00 50 02 20 00 6c 46 00 00 44 44 44 44 44 44 '
+ '44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 '
+ '44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 '
+ '44 44 44 44')
+
+ output_pkt = simple_packet(
+ '00 00 04 22 44 66 00 00 04 22 33 55 81 00 00 02 '
+ '08 00 45 00 00 52 00 01 00 00 3f 06 f6 ee c0 a8 '
+ '01 64 c0 a8 02 02 04 d2 00 50 00 00 00 00 00 00 '
+ '00 00 50 02 20 00 6c 46 00 00 44 44 44 44 44 44 '
+ '44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 '
+ '44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 '
+ '44 44 44 44')
+
+ self.dataplane.send(input_port, str(input_pkt))
+ verify_packet(self, str(output_pkt), output_port)
+
+
+
+
+
+
\ No newline at end of file