[VOL-3780] Migrating voltha-scale multi-stack pipeline to helm-charts
Change-Id: I1ba767d23fdf49fdd87cb19dded3214532f0ab1e
diff --git a/jjb/pipeline/voltha/master/voltha-scale-multi-stack.groovy b/jjb/pipeline/voltha/master/voltha-scale-multi-stack.groovy
new file mode 100644
index 0000000..955836d
--- /dev/null
+++ b/jjb/pipeline/voltha/master/voltha-scale-multi-stack.groovy
@@ -0,0 +1,443 @@
+// Copyright 2019-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// deploy VOLTHA using kind-voltha and performs a scale test
+
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+library identifier: 'cord-jenkins-libraries@master',
+ retriever: modernSCM([
+ $class: 'GitSCMSource',
+ remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+pipeline {
+
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: 120, unit: 'MINUTES')
+ }
+ environment {
+ JENKINS_NODE_COOKIE="dontKillMe" // do not kill processes after the build is done
+ KUBECONFIG="$HOME/.kube/config"
+ SSHPASS="karaf"
+ PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+
+ APPS_TO_LOG="etcd kafka onos-onos-classic adapter-open-onu adapter-open-olt rw-core ofagent bbsim radius bbsim-sadis-server"
+ LOG_FOLDER="$WORKSPACE/logs"
+ }
+
+ stages {
+ stage ('Cleanup') {
+ steps {
+ timeout(time: 11, unit: 'MINUTES') {
+ script {
+ def namespaces = ["infra"]
+ // FIXME we may have leftovers from more VOLTHA stacks (eg: run1 had 10 stacks, run2 had 2 stacks)
+ volthaStacks.toInteger().times {
+ namespaces += "voltha${it + 1}"
+ }
+ helmTeardown(namespaces)
+ }
+ sh returnStdout: false, script: """
+ helm repo add onf https://charts.opencord.org
+ helm repo add cord https://charts.opencord.org
+ helm repo update
+
+ # remove all port-forward from different namespaces
+ ps aux | grep port-forw | grep -v grep | awk '{print \$2}' | xargs --no-run-if-empty kill -9
+ """
+ }
+ }
+ }
+ stage('Download Code') {
+ steps {
+ getVolthaCode([
+ branch: "${release}",
+ volthaSystemTestsChange: "${volthaSystemTestsChange}",
+ //volthaHelmChartsChange: "${volthaHelmChartsChange}",
+ ])
+ }
+ }
+ stage('Deploy common infrastructure') {
+ // includes monitoring
+ steps {
+ sh '''
+ if [ ${withMonitoring} = true ] ; then
+ helm install -n infra nem-monitoring cord/nem-monitoring \
+ -f $HOME/voltha-scale/grafana.yaml \
+ --set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \
+ --set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false
+ fi
+ '''
+ }
+ }
+ stage('Deploy VOLTHA infrastructure') {
+ steps {
+ sh returnStdout: false, script: '''
+
+ helm install kafka -n infra $HOME/teone/helm-charts/kafka --set replicaCount=${kafkaReplicas},replicas=${kafkaReplicas} --set persistence.enabled=false \
+ --set zookeeper.replicaCount=${kafkaReplicas} --set zookeeper.persistence.enabled=false \
+ --set prometheus.kafka.enabled=true,prometheus.operator.enabled=true,prometheus.jmx.enabled=true,prometheus.operator.serviceMonitor.namespace=default
+
+ # the ETCD chart use "auth" for resons different than BBsim, so strip that away
+ ETCD_FLAGS=$(echo ${extraHelmFlags} | sed -e 's/--set auth=false / /g') | sed -e 's/--set auth=true / /g'
+ ETCD_FLAGS+=" --set auth.rbac.enabled=false,persistence.enabled=false,statefulset.replicaCount=${etcdReplicas}"
+ ETCD_FLAGS+=" --set memoryMode=${inMemoryEtcdStorage} "
+ helm install -n infra --set replicas=${etcdReplicas} etcd $HOME/teone/helm-charts/etcd $ETCD_FLAGS
+
+ helm upgrade --install -n infra voltha-infra onf/voltha-infra \
+ -f $WORKSPACE/voltha-helm-charts/examples/${workflow}-values.yaml \
+ --set onos-classic.replicas=${onosReplicas},onos-classic.atomix.replicas=${atomixReplicas} \
+ --set radius.enabled=${withEapol} \
+ --set kafka.enabled=false \
+ --set etcd.enabled=false
+ '''
+ }
+ }
+ stage('Deploy Voltha') {
+ steps {
+ deploy_voltha_stacks(params.volthaStacks)
+ }
+ }
+ stage('Start logging') {
+ steps {
+ sh returnStdout: false, script: '''
+ # start logging with kail
+
+ mkdir -p $LOG_FOLDER
+
+ list=($APPS_TO_LOG)
+ for app in "${list[@]}"
+ do
+ echo "Starting logs for: ${app}"
+ _TAG=kail-$app kail -l app=$app --since 1h > $LOG_FOLDER/$app.log&
+ done
+ '''
+ }
+ }
+ stage('Configuration') {
+ steps {
+ script {
+ sh returnStdout: false, script: """
+
+ # forward ETCD port
+ _TAG=etcd-port-forward kubectl -n infra port-forward --address 0.0.0.0 service/etcd 9999:2379& 2>&1 > /dev/null
+
+ # forward ONOS ports
+ _TAG=onos-port-forward kubectl port-forward --address 0.0.0.0 -n infra svc/voltha-infra-onos-classic-hs 8101:8101& 2>&1 > /dev/null
+ _TAG=onos-port-forward kubectl port-forward --address 0.0.0.0 -n infra svc/voltha-infra-onos-classic-hs 8181:8181& 2>&1 > /dev/null
+ """
+ sh returnStdout: false, script: """
+ # TODO this needs to be repeated per stack
+ # kubectl exec \$(kubectl get pods | grep -E "bbsim[0-9]" | awk 'NR==1{print \$1}') -- bbsimctl log ${logLevel.toLowerCase()} false
+
+ #Setting link discovery
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled ${withLLDP}
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager allowExtraneousRules true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager importExtraneousRules true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxBatchMillis 1000
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxIdleMillis 500
+
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg log:set ${logLevel} org.onosproject
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg log:set ${logLevel} org.opencord
+
+ # Set Flows/Ports/Meters poll frequency
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.flow.impl.OpenFlowRuleProvider flowPollFrequency ${onosStatInterval}
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.device.impl.OpenFlowDeviceProvider portStatsPollFrequency ${onosStatInterval}
+
+ if [ ${withFlows} = false ]; then
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.opencord.olt
+ fi
+ """
+ }
+ }
+ }
+ stage('Setup Test') {
+ steps {
+ sh '''
+ mkdir -p $WORKSPACE/RobotLogs
+ cd $WORKSPACE/voltha-system-tests
+ make vst_venv
+ '''
+ }
+ }
+ stage('Run Test') {
+ steps {
+ test_voltha_stacks(params.volthaStacks)
+ }
+ }
+ }
+ post {
+ always {
+ // collect result, done in the "post" step so it's executed even in the
+ // event of a timeout in the tests
+ sh '''
+
+ # stop the kail processes
+ list=($APPS_TO_LOG)
+ for app in "${list[@]}"
+ do
+ echo "Stopping logs for: ${app}"
+ _TAG="kail-$app"
+ P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+ if [ -n "$P_IDS" ]; then
+ echo $P_IDS
+ for P_ID in $P_IDS; do
+ kill -9 $P_ID
+ done
+ fi
+ done
+ '''
+ plot([
+ csvFileName: 'scale-test.csv',
+ csvSeries: [
+ [file: 'plots/plot-voltha-onus.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-ports.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-openolt-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-auth.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-openolt-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-dhcp.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ ],
+ group: 'Voltha-Scale-Numbers', numBuilds: '20', style: 'line', title: "Scale Test (Stacks: ${params.volthaStacks}, OLTs: ${olts}, PONs: ${pons}, ONUs: ${onus})", yaxis: 'Time (s)', useDescr: true
+ ])
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: 'RobotLogs/**/log.html',
+ otherFiles: '',
+ outputFileName: 'RobotLogs/**/output.xml',
+ outputPath: '.',
+ passThreshold: 100,
+ reportFileName: 'RobotLogs/**/report.html',
+ unstableThreshold: 0]);
+ // get all the logs from kubernetes PODs
+ sh returnStdout: false, script: '''
+
+ # store information on running charts
+ helm ls --all-namespaces > $LOG_FOLDER/helm-list.txt || true
+
+ # store information on the running pods
+ kubectl get pods --all-namespaces -o wide > $LOG_FOLDER/pods.txt || true
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-images.txt || true
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-imagesId.txt || true
+
+ # copy the ONOS logs directly from the container to avoid the color codes
+ printf '%s\n' $(kubectl -n \$INFRA_NS get pods -l app=onos-onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs --no-run-if-empty -I# bash -c "kubectl -n \$INFRA_NS cp #:${karafHome}/data/log/karaf.log $LOG_FOLDER/#.log" || true
+
+ # get radius logs out of the container
+ kubectl -n \$INFRA_NS cp $(kubectl -n \$INFRA_NS get pods -l app=radius --no-headers | awk '{print $1}'):/var/log/freeradius/radius.log $LOG_FOLDER//radius.log || true
+ '''
+ // dump all the BBSim(s) ONU information
+ script {
+ for (int i = 1; i <= params.volthaStacks.toInteger(); i++) {
+ stack_ns="voltha"+i
+ sh """
+ BBSIM_IDS=\$(kubectl -n ${stack_ns} get pods | grep bbsim | grep -v server | awk '{print \$1}')
+ IDS=(\$BBSIM_IDS)
+
+ for bbsim in "\${IDS[@]}"
+ do
+ kubectl -n ${stack_ns} exec -t \$bbsim -- bbsimctl onu list > $LOG_FOLDER/${stack_ns}/\$bbsim-device-list.txt || true
+ kubectl -n ${stack_ns} exec -t \$bbsim -- bbsimctl service list > $LOG_FOLDER/${stack_ns}/\$bbsim-service-list.txt || true
+ done
+ """
+ }
+ }
+ // get ONOS debug infos
+ sh '''
+
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 apps -a -s > $LOG_FOLDER/onos-apps.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 nodes > $LOG_FOLDER/onos-nodes.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 masters > $LOG_FOLDER/onos-masters.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 roles > $LOG_FOLDER/onos-roles.txt || true
+
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 ports > $LOG_FOLDER/onos-ports-list.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 hosts > $LOG_FOLDER/onos-hosts-list.txt || true
+
+ if [ ${withFlows} = true ] ; then
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-olts > $LOG_FOLDER/onos-olt-list.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 flows -s > $LOG_FOLDER/onos-flows-list.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 meters > $LOG_FOLDER/onos-meters-list.txt || true
+ fi
+
+ if [ ${provisionSubscribers} = true ]; then
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-subscribers > $LOG_FOLDER/onos-programmed-subscribers.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-meters > $LOG_FOLDER/onos-programmed-meters.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-bpmeter-mappings > $LOG_FOLDER/onos-bpmeter-mappings.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-failed-subscribers > $LOG_FOLDER/onos-failed-subscribers.txt || true
+ fi
+
+ if [ ${withEapol} = true ] ; then
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-users > $LOG_FOLDER/onos-aaa-users.txt || true
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-statistics > $LOG_FOLDER/onos-aaa-statistics.txt || true
+ fi
+
+ if [ ${withDhcp} = true ] ; then
+ sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 dhcpl2relay-allocations > $LOG_FOLDER/onos-dhcp-allocations.txt || true
+ fi
+ '''
+ // collect etcd metrics
+ sh '''
+ mkdir -p $WORKSPACE/etcd-metrics
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_keys_total' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-key-count.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=grpc_server_handled_total{grpc_service="etcdserverpb.KV"}' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-rpc-count.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_db_total_size_in_bytes' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-db-size.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time.json || true
+ '''
+ // get VOLTHA debug infos
+ script {
+ for (int i = 1; i <= params.volthaStacks.toInteger(); i++) {
+ stack_ns="voltha"+i
+ voltcfg="~/.volt/config-voltha"+i
+ try {
+ sh """
+
+ _TAG=voltha-port-forward kubectl port-forward --address 0.0.0.0 -n voltha${i} svc/voltha${i}-voltha-api 55555:55555& 2>&1 > /dev/null
+
+ voltctl -m 8MB device list -o json > $LOG_FOLDER/${stack_ns}/device-list.json || true
+ python -m json.tool $LOG_FOLDER/${stack_ns}/device-list.json > $LOG_FOLDER/${stack_ns}/voltha-devices-list.json || true
+ rm $LOG_FOLDER/${stack_ns}/device-list.json || true
+ voltctl -m 8MB device list > $LOG_FOLDER/${stack_ns}/voltha-devices-list.txt || true
+
+ DEVICE_LIST=
+ printf '%s\n' \$(voltctl -m 8MB device list | grep olt | awk '{print \$1}') | xargs --no-run-if-empty -I# bash -c "voltctl-m 8MB device flows # > $LOG_FOLDER/${stack_ns}/voltha-device-flows-#.txt" || true
+ printf '%s\n' \$(voltctl -m 8MB device list | grep olt | awk '{print \$1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB device port list --format 'table{{.PortNo}}\t{{.Label}}\t{{.Type}}\t{{.AdminState}}\t{{.OperStatus}}' # > $LOG_FOLDER/${stack_ns}/voltha-device-ports-#.txt" || true
+
+ printf '%s\n' \$(voltctl -m 8MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB logicaldevice flows # > $LOG_FOLDER/${stack_ns}/voltha-logicaldevice-flows-#.txt" || true
+ printf '%s\n' \$(voltctl -m 8MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB logicaldevice port list # > $LOG_FOLDER/${stack_ns}/voltha-logicaldevice-ports-#.txt" || true
+
+ # remove VOLTHA port-forward
+ ps aux | grep port-forw | grep voltha-api | grep -v grep | awk '{print \$2}' | xargs --no-run-if-empty kill -9
+ """
+ } catch(e) {
+ sh '''
+ echo "Can't get device list from voltclt"
+ '''
+ }
+ }
+ }
+ // get cpu usage by container
+ sh '''
+ if [ ${withMonitoring} = true ] ; then
+ cd $WORKSPACE/voltha-system-tests
+ source ./vst_venv/bin/activate
+ sleep 60 # we have to wait for prometheus to collect all the information
+ python tests/scale/sizing.py -o $WORKSPACE/plots || true
+ fi
+ '''
+ archiveArtifacts artifacts: 'kind-voltha/install-*.log,execution-time-*.txt,logs/**/*,RobotLogs/**/*,plots/*,etcd-metrics/*'
+ }
+ }
+}
+
+def deploy_voltha_stacks(numberOfStacks) {
+ for (int i = 1; i <= numberOfStacks.toInteger(); i++) {
+ stage("Deploy VOLTHA stack " + i) {
+ // ${logLevel}
+ def extraHelmFlags = "${extraHelmFlags} --set global.log_level=DEBUG,enablePerf=true,onu=${onus},pon=${pons} "
+ extraHelmFlags += " --set securityContext.enabled=false,atomix.persistence.enabled=false "
+ // FIXME having to set all of these values is annoying, is there a better solution?
+ def controllerFlags = " "
+ onosReplicas.toInteger().times {
+ controllerFlags += " --set services.controller[${it}].address=onos-onos-classic-${it}.onos-onos-classic-hs.infra.svc:6653"
+ }
+
+ def volthaHelmFlags = "${controllerFlags} " + extraHelmFlags +
+ "--set voltha.services.kafka.adapter.address=kafka.infra.svc:9092 " +
+ "--set voltha.services.kafka.cluster.address=kafka.infra.svc:9092 " +
+ "--set voltha.services.etcd.address=etcd.infra.svc:2379 " +
+ "--set voltha-adapter-openolt.services.kafka.adapter.address=kafka.infra.svc:9092 " +
+ "--set voltha-adapter-openolt.services.kafka.cluster.address=kafka.infra.svc:9092 " +
+ "--set voltha-adapter-openolt.services.etcd.address=etcd.infra.svc:2379 " +
+ "--set voltha-adapter-openonu.services.kafka.adapter.address=kafka.infra.svc:9092 " +
+ "--set voltha-adapter-openonu.services.kafka.cluster.address=kafka.infra.svc:9092 " +
+ "--set voltha-adapter-openonu.services.etcd.address=etcd.infra.svc:2379"
+ volthaStackDeploy([
+ bbsimReplica: olts.toInteger(),
+ infraNamespace: "infra",
+ volthaNamespace: "voltha${i}",
+ stackName: "voltha${i}",
+ stackId: i,
+ workflow: workflow,
+ extraHelmFlags: volthaHelmFlags
+ ])
+ }
+ }
+}
+
+def test_voltha_stacks(numberOfStacks) {
+ for (int i = 1; i <= numberOfStacks.toInteger(); i++) {
+ stage("Test VOLTHA stack " + i) {
+ timeout(time: 15, unit: 'MINUTES') {
+ sh """
+
+ # we are restarting the voltha-api port-forward for each stack, no need to have a different voltconfig file
+ voltctl -s 127.0.0.1:55555 config > $HOME/.volt/config
+ export VOLTCONFIG=$HOME/.volt/config
+
+ _TAG=voltha-port-forward kubectl port-forward --address 0.0.0.0 -n voltha${i} svc/voltha${i}-voltha-api 55555:55555& 2>&1 > /dev/null
+
+ ROBOT_PARAMS="-v stackId:${i} \
+ -v olt:${olts} \
+ -v pon:${pons} \
+ -v onu:${onus} \
+ -v workflow:${workflow} \
+ -v withEapol:${withEapol} \
+ -v withDhcp:${withDhcp} \
+ -v withIgmp:${withIgmp} \
+ --noncritical non-critical \
+ -e igmp \
+ -e teardown "
+
+ if [ ${withEapol} = false ] ; then
+ ROBOT_PARAMS+="-e authentication "
+ fi
+
+ if [ ${withDhcp} = false ] ; then
+ ROBOT_PARAMS+="-e dhcp "
+ fi
+
+ if [ ${provisionSubscribers} = false ] ; then
+ # if we're not considering subscribers then we don't care about authentication and dhcp
+ ROBOT_PARAMS+="-e authentication -e provision -e flow-after -e dhcp "
+ fi
+
+ if [ ${withFlows} = false ] ; then
+ ROBOT_PARAMS+="-i setup -i activation "
+ fi
+
+ cd $WORKSPACE/voltha-system-tests
+ source ./vst_venv/bin/activate
+ robot -d $WORKSPACE/RobotLogs/voltha${i} \
+ \$ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
+
+ # collect results
+ python tests/scale/collect-result.py -r $WORKSPACE/RobotLogs/voltha${i}/output.xml -p $WORKSPACE/plots > $WORKSPACE/execution-time-voltha${i}.txt || true
+ cat $WORKSPACE/execution-time-voltha${i}.txt
+ """
+ sh """
+ # remove VOLTHA port-forward
+ ps aux | grep port-forw | grep voltha-api | grep -v grep | awk '{print \$2}' | xargs --no-run-if-empty kill -9 2>&1 > /dev/null
+ """
+ }
+ }
+ }
+}
diff --git a/jjb/voltha-scale.yaml b/jjb/voltha-scale.yaml
index 92251b2..63cdea1 100644
--- a/jjb/voltha-scale.yaml
+++ b/jjb/voltha-scale.yaml
@@ -108,16 +108,16 @@
- 'voltha-scale-measurements':
name: 'voltha-scale-measurements-master-experimental-multi-stack'
build-node: 'voltha-scale-2'
- pipeline-script: 'voltha-scale-multi-stack.groovy'
+ pipeline-script: 'voltha/master/voltha-scale-multi-stack.groovy'
'disable-job': false
# trigger on Feb 29th (a.k.a only trigger it manually)
time-trigger: "H 0 29 2 *"
withMonitoring: true
logLevel: WARN
- volthaStacks: 10
+ volthaStacks: 2
olts: 2
- pons: 16
- onus: 32
+ pons: 2
+ onus: 2
withFlows: true
provisionSubscribers: true
workflow: dt
@@ -228,8 +228,8 @@
- 'voltha-scale-measurements':
name: 'voltha-scale-measurements-master-10-stacks-2-16-32-att-subscribers'
build-node: 'voltha-scale-2'
- pipeline-script: 'voltha-scale-multi-stack.groovy'
- 'disable-job': true
+ pipeline-script: 'voltha/master/voltha-scale-multi-stack.groovy'
+ 'disable-job': false
time-trigger: "H H/4 * * *"
withMonitoring: false
logLevel: WARN
@@ -247,8 +247,8 @@
- 'voltha-scale-measurements':
name: 'voltha-scale-measurements-master-10-stacks-2-16-32-dt-subscribers'
build-node: 'voltha-scale-2'
- pipeline-script: 'voltha-scale-multi-stack.groovy'
- 'disable-job': true
+ pipeline-script: 'voltha/master/voltha-scale-multi-stack.groovy'
+ 'disable-job': false
time-trigger: "H H/4 * * *"
withMonitoring: false
logLevel: WARN
@@ -266,8 +266,8 @@
- 'voltha-scale-measurements':
name: 'voltha-scale-measurements-master-10-stacks-2-16-32-tt-subscribers'
build-node: 'voltha-scale-2'
- pipeline-script: 'voltha-scale-multi-stack.groovy'
- 'disable-job': true
+ pipeline-script: 'voltha/master/voltha-scale-multi-stack.groovy'
+ 'disable-job': false
time-trigger: "H H/4 * * *"
withMonitoring: false
logLevel: WARN
@@ -362,7 +362,7 @@
name: 'voltha-scale-measurements-2.6-10-stacks-2-16-32-att-subscribers'
build-node: 'voltha-scale-2'
pipeline-script: 'voltha-scale-multi-stack.groovy'
- 'disable-job': true
+ 'disable-job': false
time-trigger: "H H/4 * * *"
withMonitoring: false
logLevel: WARN
@@ -382,7 +382,7 @@
name: 'voltha-scale-measurements-2.6-10-stacks-2-16-32-dt-subscribers'
build-node: 'voltha-scale-2'
pipeline-script: 'voltha-scale-multi-stack.groovy'
- 'disable-job': true
+ 'disable-job': false
time-trigger: "H H/4 * * *"
withMonitoring: false
logLevel: WARN
@@ -402,7 +402,7 @@
name: 'voltha-scale-measurements-2.6-10-stacks-2-16-32-tt-subscribers'
build-node: 'voltha-scale-2'
pipeline-script: 'voltha-scale-multi-stack.groovy'
- 'disable-job': true
+ 'disable-job': false
time-trigger: "H H/4 * * *"
withMonitoring: false
logLevel: WARN
diff --git a/vars/volthaDeploy.groovy b/vars/volthaDeploy.groovy
index eb9faca..45e214d 100644
--- a/vars/volthaDeploy.groovy
+++ b/vars/volthaDeploy.groovy
@@ -11,6 +11,8 @@
bbsimReplica: 1,
infraNamespace: "infra",
volthaNamespace: "voltha",
+ stackName: "voltha",
+ stackId: 1,
workflow: "att",
extraHelmFlags: "",
]
diff --git a/vars/volthaStackDeploy.groovy b/vars/volthaStackDeploy.groovy
index 78d90bf..c68de53 100644
--- a/vars/volthaStackDeploy.groovy
+++ b/vars/volthaStackDeploy.groovy
@@ -2,14 +2,11 @@
def call(Map config) {
// note that I can't define this outside the function as there's no global scope in Groovy
def defaultConfig = [
- onosReplica: 1,
- atomixReplica: 1,
- kafkaReplica: 1,
- etcdReplica: 1,
bbsimReplica: 1,
infraNamespace: "infra",
volthaNamespace: "voltha",
stackName: "voltha",
+ stackId: 1, // NOTE this is used to differentiate between BBSims across multiple stacks
workflow: "att",
extraHelmFlags: "",
]
@@ -33,7 +30,7 @@
// TODO differentiate olt_id between different stacks
sh """
helm upgrade --install --create-namespace -n ${cfg.volthaNamespace} bbsim${i} onf/bbsim ${cfg.extraHelmFlags} \
- --set olt_id="1${i}" \
+ --set olt_id="${cfg.stackId}${i}" \
-f $WORKSPACE/voltha-helm-charts/examples/${cfg.workflow}-values.yaml
"""
}