diff --git a/jjb/pipeline/voltha/master/dmi-build-and-test.groovy b/jjb/pipeline/voltha/master/dmi-build-and-test.groovy
new file mode 100755
index 0000000..a0fb12e
--- /dev/null
+++ b/jjb/pipeline/voltha/master/dmi-build-and-test.groovy
@@ -0,0 +1,340 @@
+// Copyright 2022-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// used to deploy VOLTHA and configure ONOS physical PODs
+
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+def infraNamespace = "infra"
+def volthaNamespace = "voltha"
+
+def deploy_custom_chart(namespace, name, chart, extraHelmFlags) {
+  sh """
+    helm install --create-namespace --set defaults.image_pullPolicy=Always --namespace ${namespace} ${extraHelmFlags} ${name} ${chart}
+   """
+}
+
+pipeline {
+
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+    timeout(time: 45, unit: 'MINUTES')
+  }
+  environment {
+    PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+    KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
+    VOLTCONFIG="$HOME/.volt/config-minimal"
+    LOG_FOLDER="$WORKSPACE/dmi/"
+    APPS_TO_LOG="${OltDevMgr}"
+  }
+
+  stages{
+    stage('Download Code') {
+      steps {
+        getVolthaCode([
+          branch: "${branch}",
+          volthaSystemTestsChange: "${volthaSystemTestsChange}",
+          volthaHelmChartsChange: "${volthaHelmChartsChange}",
+        ])
+      }
+    }
+    stage ("Parse deployment configuration file") {
+      steps {
+        sh returnStdout: true, script: "rm -rf ${configBaseDir}"
+        sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
+        script {
+          if ( params.workFlow == "DT" ) {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+          }
+          else if ( params.workFlow == "TT" )
+          {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+          }
+          else
+          {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+          }
+        }
+      }
+    }
+    stage('Clean up') {
+      steps {
+        timeout(15) {
+          script {
+            helmTeardown(["default", infraNamespace, volthaNamespace])
+          }
+          timeout(1) {
+            sh returnStdout: false, script: '''
+            # remove orphaned port-forward from different namespaces
+            ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
+            '''
+          }
+        }
+      }
+    }
+    stage('Install Voltha')  {
+      steps {
+        timeout(20) {
+          installVoltctl("${branch}")
+          script {
+            // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
+            def localCharts = false
+            if (volthaHelmChartsChange != "") {
+              localCharts = true
+            }
+
+            // should the config file be suffixed with the workflow? see "deployment_config"
+            def localHelmFlags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml --set global.log_level=${logLevel} "
+
+            if (workFlow.toLowerCase() == "dt") {
+              localHelmFlags += " --set radius.enabled=false "
+            }
+            if (workFlow.toLowerCase() == "tt") {
+              localHelmFlags += " --set radius.enabled=false --set global.incremental_evto_update=true "
+                if (enableMultiUni.toBoolean()) {
+                    localHelmFlags += " --set voltha-adapter-openonu.adapter_open_onu.uni_port_mask=${uniPortMask} "
+                }
+            }
+
+            // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
+            // and to connect the ofagent to all instances of ONOS
+            localHelmFlags = localHelmFlags + " --set onos-classic.onosSshPort=30115 " +
+            "--set onos-classic.onosApiPort=30120 " +
+            "--set onos-classic.onosOfPort=31653 " +
+            "--set onos-classic.individualOpenFlowNodePorts=true " +
+            "--set voltha.onos_classic.replicas=${params.NumOfOnos}"
+
+            if (bbsimReplicas.toInteger() != 0) {
+              localHelmFlags = localHelmFlags + " --set onu=${onuNumber},pon=${ponNumber} "
+            }
+
+            // adding user specified helm flags at the end so they'll have priority over everything else
+            localHelmFlags = localHelmFlags + " ${extraHelmFlags}"
+
+            def numberOfAdaptersToWait = 2
+
+            if(openoltAdapterChart != "onf/voltha-adapter-openolt") {
+              localHelmFlags = localHelmFlags + " --set voltha-adapter-openolt.enabled=false"
+              // We skip waiting for adapters in the volthaDeploy step because it's already waiting for
+              // both of them after the deployment of the custom olt adapter. See line 156.
+              numberOfAdaptersToWait = 0
+            }
+
+            volthaDeploy([
+              workflow: workFlow.toLowerCase(),
+              extraHelmFlags: localHelmFlags,
+              localCharts: localCharts,
+              kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
+              onosReplica: params.NumOfOnos,
+              atomixReplica: params.NumOfAtomix,
+              kafkaReplica: params.NumOfKafka,
+              etcdReplica: params.NumOfEtcd,
+              bbsimReplica: bbsimReplicas.toInteger(),
+              adaptersToWait: numberOfAdaptersToWait,
+              ])
+
+            if(openoltAdapterChart != "onf/voltha-adapter-openolt"){
+              extraHelmFlags = extraHelmFlags + " --set global.log_level=${logLevel}"
+              deploy_custom_chart(volthaNamespace, oltAdapterReleaseName, openoltAdapterChart, extraHelmFlags)
+              waitForAdapters([
+                adaptersToWait: 2
+              ])
+            }
+          }
+          sh """
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-api" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG="etcd" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd ${params.VolthaEtcdPort}:2379; done"&
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG="kafka" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
+          ps aux | grep port-forward
+          """
+          getPodsInfo("$WORKSPACE")
+        }
+      }
+    }
+    stage('Deploy Device Manager Interface Chart') {
+      steps {
+        script {
+          deploy_custom_chart('default', 'olt-device-manager', dmiChart, extraHelmFlags)
+        }
+        println "Wait for olt-device-manager to start"
+        sh """
+            set +x
+            devmgr=\$(kubectl get pods -l app.kubernetes.io/name=${params.OltDevMgr} --no-headers | grep "0/" | wc -l)
+            while [[ \$devmgr != 0 ]]; do
+              sleep 5
+              devmgr=\$(kubectl get pods -l app.kubernetes.io/name=${params.OltDevMgr} --no-headers | grep "0/" | wc -l)
+            done
+        """
+        sh """
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG="${params.OltDevMgr}" bash -c "while true; do kubectl port-forward --address 0.0.0.0 svc/${params.OltDevMgr} 50051:10000; done"&
+          ps aux | grep port-forward
+        """
+      }
+    }
+    stage('Start logging') {
+      steps {
+        sh returnStdout: false, script: '''
+          # start logging with kail
+          cd $WORKSPACE
+          mkdir -p $LOG_FOLDER
+          list=($APPS_TO_LOG)
+          for app in "${list[@]}"
+          do
+            echo "Starting logs for: ${app}"
+            _TAG=kail-$app kail -l app.kubernetes.io/name=$app --since 1h > $LOG_FOLDER/$app.log&
+          done
+        '''
+      }
+    }
+    stage('Reinstall OLT software') {
+      steps {
+        script {
+          if ( params.reinstallOlt ) {
+            for(int i=0; i < deployment_config.olts.size(); i++) {
+              sh returnStdout: true, script: """
+              ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+              if [ "${params.inBandManagement}" == "true" ]; then
+                sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
+              fi
+              sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
+              sleep 10
+              """
+              timeout(5) {
+                waitUntil {
+                  olt_sw_present = sh returnStdout: true, script: """
+                  if [[ "${deployment_config.olts[i].oltDebVersion}" == *"asfvolt16"* ]]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asfvolt16 | wc -l'
+                  elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"asgvolt64"* ]]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asgvolt64 | wc -l'
+                  elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"rlt-1600x-w"* ]]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep rlt-1600x-w | wc -l'
+                  elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"rlt-1600g-w"* ]]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep rlt-1600g-w | wc -l'
+                  elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"rlt-3200g-w"* ]]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep rlt-3200g-w | wc -l'
+                  else
+                    echo Unknown Debian package for openolt
+                  fi
+                  if (${deployment_config.olts[i].fortygig}); then
+                    if [[ "${params.inBandManagement}" == "true" ]]; then
+                      ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+                      sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'mkdir -p /opt/openolt/'
+                      sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/watchdog-script/* /opt/openolt/'
+                      sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/bal_cli_appl/example_user_appl /broadcom'
+                      sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp in-band-startup-script/* /etc/init.d/'
+                    fi
+                  fi
+                  """
+                  return olt_sw_present.toInteger() > 0
+                }
+              }
+            }
+          }
+        }
+      }
+    }
+    stage('Restart OLT processes') {
+      steps {
+        script {
+          if ( params.restartOlt ) {
+            //rebooting OLTs
+            for(int i=0; i < deployment_config.olts.size(); i++) {
+              timeout(15) {
+                sh returnStdout: true, script: """
+                ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+                sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; rm -f /var/log/openolt_process_watchdog.log; reboot > /dev/null &' || true
+                """
+              }
+            }
+            sh returnStdout: true, script: """
+            sleep ${params.waitTimerForOltUp}
+            """
+            //Checking dev_management_deamon and openoltprocesses
+            for(int i=0; i < deployment_config.olts.size(); i++) {
+              if ( params.oltAdapterReleaseName != "open-olt" ) {
+                timeout(15) {
+                  waitUntil {
+                    devprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep dev_mgmt_daemon | wc -l'"
+                    return devprocess.toInteger() > 0
+                  }
+                }
+                timeout(15) {
+                  waitUntil {
+                    openoltprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep openolt | wc -l'"
+                    return openoltprocess.toInteger() > 0
+                  }
+                }
+              }
+            }
+          }
+        }
+      }
+    }
+    stage('Run Device Management Interface Tests') {
+      environment {
+        ROBOT_FILE="dmi-hw-management.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs"
+        ROBOT_CONFIG_FILE="$WORKSPACE/voltha-system-tests/tests/data/dmi-components-adtran.yaml"
+      }
+      steps {
+        sh """
+          mkdir -p $ROBOT_LOGS_DIR
+          export ROBOT_MISC_ARGS="--removekeywords wuks -e notreadyDMI -i functionalDMI -d $ROBOT_LOGS_DIR"
+          make -C $WORKSPACE/voltha-system-tests voltha-dmi-test || true
+        """
+      }
+    }
+  }
+
+  post {
+    always {
+      sh '''
+      # stop the kail processes
+      list=($APPS_TO_LOG)
+      for app in "${list[@]}"
+      do
+        echo "Stopping logs for: ${app}"
+        _TAG="kail-$app"
+        P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+        if [ -n "$P_IDS" ]; then
+          echo $P_IDS
+          for P_ID in $P_IDS; do
+            kill -9 $P_ID
+          done
+        fi
+      done
+      '''
+      step([$class: 'RobotPublisher',
+        disableArchiveOutput: false,
+        logFileName: 'RobotLogs/log*.html',
+        otherFiles: '',
+        outputFileName: 'RobotLogs/output*.xml',
+        outputPath: '.',
+        passThreshold: 100,
+        reportFileName: 'RobotLogs/report*.html',
+        unstableThreshold: 0,
+        onlyCritical: true]);
+      archiveArtifacts artifacts: '**/*.txt,**/*.gz,*.gz,**/*.log'
+    }
+  }
+}
diff --git a/jjb/voltha-test/voltha-nightly-jobs.yaml b/jjb/voltha-test/voltha-nightly-jobs.yaml
index 278c91b..7b00b24 100644
--- a/jjb/voltha-test/voltha-nightly-jobs.yaml
+++ b/jjb/voltha-test/voltha-nightly-jobs.yaml
@@ -678,3 +678,236 @@
 
     project-type: pipeline
     dsl: !include-raw-escape: ../pipeline/{pipeline-script}
+
+# VOLTHA DMI Test Job
+# This job is triggered by a timer defined in the job
+- job-template:
+    name: 'verify_{config-pod}_{profile}{name-extension}_voltha_{release}_dmi'
+    id: verify_voltha_pod_dmi_test
+    disabled: '{disable-job}'
+    description: |
+                  Manual Build on POD {config-pod}, using pipeline/{pipeline-script} in {gerrit-server-url}/ci-management' <br /><br />
+                  Created from job-template {id} from ci-management/jjb/voltha-test/voltha-nightly-jobs.yaml <br />
+                  Created by QA (Suchitra Vemuri - suchitra@opennetworking.org ) <br />
+                  Copyright (c) 2018 Open Networking Foundation (ONF)
+
+    <<: *voltha-pipe-job-boiler-plate
+    # default values
+    pipeline-script: 'voltha/master/dmi-build-and-test.groovy'
+    VolthaEtcdPort: 2379
+    num-of-openonu: 1
+    num-of-onos: 3
+    num-of-atomix: 3
+    num-of-kafka: 3
+    num-of-etcd: 3
+    test-repo: 'voltha-system-tests'
+    release: 'master'
+    name-extension: ''
+    branch: 'master'
+    configurePod: true
+    volthaHelmChartsChange: ''
+    profile: 'Default'
+    logLevel: 'DEBUG'
+    enableMultiUni: false
+    uniPortMask: '0x0001'
+    bbsimReplicas: 0
+    num-of-onus: 0
+    num-of-ponports: 0
+    extraHelmFlags: ''
+    dmiChart: ''
+    OltDevMgr: ''
+    openoltAdapterChart: onf/voltha-adapter-openolt
+    oltAdapterReleaseName: open-olt
+    waitTimerForOltUp: 360
+
+    parameters:
+      - string:
+          name: buildNode
+          default: '{build-node}'
+          description: 'Name of the Jenkins executor node to run the job on'
+
+      - string:
+          name: TestNodeName
+          default: '{build-node}'
+          description: 'DEPRECATED - use buildNode instead'
+
+      - string:
+          name: logLevel
+          default: '{logLevel}'
+          description: 'Log level for all the components'
+
+      - string:
+          name: cordRepoUrl
+          default: '{gerrit-server-url}'
+          description: 'The URL of the CORD Project repository'
+
+      - string:
+          name: configBaseDir
+          default: 'pod-configs'
+          description: 'The directory inside the POD configs repository'
+
+      - string:
+          name: configDeploymentDir
+          default: 'deployment-configs'
+          description: 'The deployment configs folder'
+
+      - string:
+          name: configKubernetesDir
+          default: 'kubernetes-configs'
+          description: 'The kubernetes config folder'
+
+      - string:
+          name: configToscaDir
+          default: 'tosca-configs'
+          description: 'The tosca config folder'
+
+      - string:
+          name: configFileName
+          default: '{config-pod}'
+          description: 'The config file'
+
+      - string:
+          name: profile
+          default: '{profile}'
+          description: 'Technology Profile pushed to the ETCD'
+
+      - string:
+          name: helmRepoUrl
+          default: 'https://charts.opencord.org'
+          description: 'URL where helm-charts are published'
+
+      - string:
+          name: branch
+          default: '{branch}'
+
+      - string:
+          name: workFlow
+          default: '{work-flow}'
+          description: 'Installs and uses the specified work flow on the POD'
+
+      - string:
+          name: extraHelmFlags
+          default: '{extraHelmFlags}'
+          description: 'Helm flags (passed to each deployment)'
+
+      - string:
+          name: dmiChart
+          default: '{dmiChart}'
+          description: 'Device Management Interface Helm Chart'
+
+      - string:
+          name: OltDevMgr
+          default: '{OltDevMgr}'
+          description: 'OLT Device Manager App Name'
+
+      # openonu-go only supports a single replica, remove after 2.8
+      - string:
+          name: NumOfOpenOnu
+          default: '{num-of-openonu}'
+          description: 'Installs the specified Number of OpenOnu Adapters'
+
+      - string:
+          name: NumOfOnos
+          default: '{num-of-onos}'
+          description: 'Installs the specified Number of ONOS instances'
+
+      - bool:
+          name: enableMultiUni
+          default: '{enableMultiUni}'
+          description: "Enables the Multi UNI feature"
+
+      - string:
+          name: uniPortMask
+          default: '{uniPortMask}'
+          description: 'Open ONU adapter uni_port_mask, used when enableMultiUni is set to True, values: 0x0001-0x00FF'
+
+      - string:
+          name: bbsimReplicas
+          default: '{bbsimReplicas}'
+          description: 'Installs the specified Number of BBSim Instances'
+
+      - string:
+          name: onuNumber
+          default: '{num-of-onus}'
+          description: "Onus per PonPort"
+
+      - string:
+          name: ponNumber
+          default: '{num-of-ponports}'
+          description: "Number of PON Ports"
+
+      - string:
+          name: NumOfAtomix
+          default: '{num-of-atomix}'
+          description: 'Installs the specified Number of Atomix Instances'
+
+      - string:
+          name: NumOfKafka
+          default: '{num-of-kafka}'
+          description: 'Installs the specified Number of Kafka Instances'
+
+      - string:
+          name: NumOfEtcd
+          default: '{num-of-etcd}'
+          description: 'Installs the specified Number of Etcd Instances'
+
+      - bool:
+          name: configurePod
+          default: true
+          description: "Configure POD via TOSCA post build"
+
+      - bool:
+          name: reinstallOlt
+          default: '{reinstall-olt}'
+          description: "Re-install olt software bringing up CORD"
+
+      - bool:
+          name: restartOlt
+          default: '{restart-olt}'
+          description: "Re-install olt software bringing up CORD"
+
+      - string:
+          name: VolthaEtcdPort
+          default: '{VolthaEtcdPort}'
+          description: 'Localhost port that is forwarded to VOLTHA etcd'
+
+      - bool:
+          name: inBandManagement
+          default: '{in-band-management}'
+          description: 'Indicates whether POD is configured for in band management'
+
+      - string:
+          name: volthaSystemTestsChange
+          default: '{volthaSystemTestsChange}'
+          description: 'Download a change for gerrit in the voltha-system-tests repo, example value: "refs/changes/79/18779/13"'
+
+      - string:
+          name: volthaHelmChartsChange
+          default: '{volthaHelmChartsChange}'
+          description: 'Download a change for gerrit in the voltha-helm-charts repo, example value: "refs/changes/32/19132/1"'
+
+      # this is used in the Adtran DT job
+      - string:
+          name: openoltAdapterChart
+          default: '{openoltAdapterChart}'
+          description: 'Olt adapter chart name (or location on file system)'
+
+      # this is used in the Adtran DT job
+      - string:
+          name: oltAdapterReleaseName
+          default: '{oltAdapterReleaseName}'
+          description: 'Olt adapter release name'
+
+      - string:
+          name: waitTimerForOltUp
+          default: '{waitTimerForOltUp}'
+          description: 'Wait timer for the OLT to come up after reboot'
+
+    concurrent: true
+    project-type: pipeline
+    dsl: !include-raw-escape: ../pipeline/{pipeline-script}
+
+    triggers:
+      - timed: |
+                 TZ=America/Los_Angeles
+                 H {time} * * *
diff --git a/jjb/voltha-test/voltha.yaml b/jjb/voltha-test/voltha.yaml
index 71d0498..ab66f39 100644
--- a/jjb/voltha-test/voltha.yaml
+++ b/jjb/voltha-test/voltha.yaml
@@ -573,3 +573,24 @@
           power-switch: True
           pipeline-script: 'voltha/voltha-2.8/voltha-dt-physical-functional-tests.groovy'
           oltAdapterAppLabel: 'adapter-adtran-olt'
+
+      # Berlin pod with adtran gpon olt/onu - 2.8 1T8GEM tech profile and timer based job
+      - 'verify_voltha_pod_dmi_test':
+          build-node: 'dt-berlin-community-pod'
+          config-pod: 'dt-berlin-pod-gpon-adtran'
+          work-flow: 'DT'
+          release: 'master'
+          branch: 'master'
+          profile: 'Default'
+          reinstall-olt: false
+          restart-olt: false
+          extraHelmFlags: " -f /home/community/SDX_Device_Manager_21.4/helm/values-onf.yaml "
+          dmiChart: '/home/community/SDX_Device_Manager_21.4/helm/adtran-olt-device-manager'
+          OltDevMgr: 'adtran-olt-device-manager'
+          num-of-onos: '3'
+          num-of-atomix: '3'
+          VolthaEtcdPort: 9999
+          openoltAdapterChart: '/home/community/adtran-21.5-voltha-2.8/voltha-adapter-adtran-olt'
+          oltAdapterReleaseName: 'adtran-olt'
+          waitTimerForOltUp: 420
+          time: '15'