diff --git a/jjb/cord-test/voltha.yaml b/jjb/cord-test/voltha.yaml
index 127e3f2..1a9957e 100644
--- a/jjb/cord-test/voltha.yaml
+++ b/jjb/cord-test/voltha.yaml
@@ -234,36 +234,6 @@
           profile: 'TP'
           power-switch: True
 
-      # Menlo pod with olt/onu - Default tech profile and timer based job
-      - 'build_voltha_pod_release_timer':
-          build-node: 'menlo-demo-pod'
-          config-pod: 'onf-demo-pod-gpon'
-          release: 'master'
-          branch: 'master'
-          num-of-openonu: '1'
-          num-of-onos: '3'
-          num-of-atomix: '3'
-          name-extension: '_DT_GPON'
-          work-flow: 'DT'
-          test-repo: 'voltha-system-tests'
-          Jenkinsfile: 'Jenkinsfile-voltha-build'
-          configurePod: true
-          profile: '1T8GEM'
-          time: '22'
-          VolthaEtcdPort: '9999'
-
-      # Menlo pod test job - uses tech profile on voltha branch
-      - 'build_voltha_pod_test':
-          build-node: 'menlo-demo-pod'
-          config-pod: 'onf-demo-pod-gpon'
-          release: 'master'
-          branch: 'master'
-          name-extension: '_DT_GPON'
-          work-flow: 'DT'
-          test-repo: 'voltha-system-tests'
-          profile: '1T8GEM'
-          pipeline-script: 'voltha-dt-physical-functional-tests.groovy'
-
       # Menlo pod with olt/onu - 1T4GEM tech profile and timer based job
       - 'build_voltha_pod_release_timer':
           build-node: 'menlo-demo-pod'
diff --git a/jjb/pipeline/voltha-bbsim-tests.groovy b/jjb/pipeline/voltha-bbsim-tests.groovy
index 0409988..65f1eac 100644
--- a/jjb/pipeline/voltha-bbsim-tests.groovy
+++ b/jjb/pipeline/voltha-bbsim-tests.groovy
@@ -454,9 +454,9 @@
       sh '''
 
         # get pods information
-        kubectl get pods -o wide
+        kubectl get pods -o wide --all-namespaces
         kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}"
-        helm ls
+        helm ls --all-namespaces
 
          set +e
          cp $WORKSPACE/kind-voltha/install-$NAME.log $WORKSPACE/
diff --git a/jjb/pipeline/voltha-scale-test-2.6.groovy b/jjb/pipeline/voltha-scale-test-2.6.groovy
new file mode 100644
index 0000000..db5107e
--- /dev/null
+++ b/jjb/pipeline/voltha-scale-test-2.6.groovy
@@ -0,0 +1,679 @@
+// Copyright 2019-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// deploy VOLTHA using kind-voltha and performs a scale test
+
+pipeline {
+
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+      timeout(time: 60, unit: 'MINUTES')
+  }
+  environment {
+    JENKINS_NODE_COOKIE="dontKillMe" // do not kill processes after the build is done
+    KUBECONFIG="$HOME/.kube/config"
+    VOLTCONFIG="$HOME/.volt/config"
+    SSHPASS="karaf"
+    PATH="$PATH:$WORKSPACE/kind-voltha/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+    SCHEDULE_ON_CONTROL_NODES="yes"
+    FANCY=0
+    WITH_SIM_ADAPTERS="no"
+    WITH_RADIUS="${withRadius}"
+    WITH_BBSIM="yes"
+    LEGACY_BBSIM_INDEX="no"
+    DEPLOY_K8S="no"
+    CONFIG_SADIS="external"
+    WITH_KAFKA="kafka.default.svc.cluster.local"
+    WITH_ETCD="etcd.default.svc.cluster.local"
+    VOLTHA_ETCD_PORT=9999
+
+    // install everything in the default namespace
+    VOLTHA_NS="default"
+    ADAPTER_NS="default"
+    INFRA_NS="default"
+    BBSIM_NS="default"
+
+    // configurable options
+    WITH_EAPOL="${withEapol}"
+    WITH_DHCP="${withDhcp}"
+    WITH_IGMP="${withIgmp}"
+    VOLTHA_LOG_LEVEL="${logLevel}"
+    NUM_OF_BBSIM="${olts}"
+    NUM_OF_OPENONU="${openonuAdapterReplicas}"
+    NUM_OF_ONOS="${onosReplicas}"
+    NUM_OF_ATOMIX="${atomixReplicas}"
+    WITH_PPROF="${withProfiling}"
+    EXTRA_HELM_FLAGS="${extraHelmFlags} " // note that the trailing space is required to separate the parameters from appends done later
+    VOLTHA_CHART="${volthaChart}"
+    VOLTHA_BBSIM_CHART="${bbsimChart}"
+    VOLTHA_ADAPTER_OPEN_OLT_CHART="${openoltAdapterChart}"
+    VOLTHA_ADAPTER_OPEN_ONU_CHART="${openonuAdapterChart}"
+    ONOS_CLASSIC_CHART="${onosChart}"
+    RADIUS_CHART="${radiusChart}"
+
+    APPS_TO_LOG="etcd kafka onos-onos-classic adapter-open-onu adapter-open-olt rw-core ofagent bbsim radius bbsim-sadis-server"
+    LOG_FOLDER="$WORKSPACE/logs"
+
+    GERRIT_PROJECT="${GERRIT_PROJECT}"
+  }
+
+  stages {
+    stage ('Cleanup') {
+      steps {
+        timeout(time: 11, unit: 'MINUTES') {
+          sh returnStdout: false, script: """
+            helm repo add stable https://charts.helm.sh/stable
+            helm repo add onf https://charts.opencord.org
+            helm repo add cord https://charts.opencord.org
+            helm repo add onos https://charts.onosproject.org
+            helm repo add atomix https://charts.atomix.io
+            helm repo add bbsim-sadis https://ciena.github.io/bbsim-sadis-server/charts
+            helm repo update
+
+            # removing ETCD port forward
+            P_ID="\$(ps e -ww -A | grep "_TAG=etcd-port-forward" | grep -v grep | awk '{print \$1}')"
+            if [ -n "\$P_ID" ]; then
+              kill -9 \$P_ID
+            fi
+
+            NAMESPACES="voltha1 voltha2 infra default"
+            for NS in \$NAMESPACES
+            do
+                for hchart in \$(helm list -n \$NS -q | grep -E -v 'docker-registry|kafkacat');
+                do
+                    echo "Purging chart: \${hchart}"
+                    helm delete -n \$NS "\${hchart}"
+                done
+            done
+
+            test -e $WORKSPACE/kind-voltha/voltha && cd $WORKSPACE/kind-voltha && ./voltha down
+
+            # remove orphaned port-forward from different namespaces
+            ps aux | grep port-forw | grep -v grep | awk '{print \$2}' | xargs --no-run-if-empty kill -9
+
+            cd $WORKSPACE
+            rm -rf $WORKSPACE/*
+          """
+        }
+      }
+    }
+    stage('Clone kind-voltha') {
+      steps {
+        checkout([
+          $class: 'GitSCM',
+          userRemoteConfigs: [[
+            url: "https://gerrit.opencord.org/kind-voltha",
+          ]],
+          branches: [[ name: "master", ]],
+          extensions: [
+            [$class: 'WipeWorkspace'],
+            [$class: 'RelativeTargetDirectory', relativeTargetDir: "kind-voltha"],
+            [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+          ],
+        ])
+      }
+    }
+    stage('Clone voltha-system-tests') {
+      steps {
+        checkout([
+          $class: 'GitSCM',
+          userRemoteConfigs: [[
+            url: "https://gerrit.opencord.org/voltha-system-tests",
+            refspec: "${volthaSystemTestsChange}"
+          ]],
+          branches: [[ name: "${release}", ]],
+          extensions: [
+            [$class: 'WipeWorkspace'],
+            [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"],
+            [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+          ],
+        ])
+        script {
+          sh(script:"""
+            if [ '${volthaSystemTestsChange}' != '' ] ; then
+              cd $WORKSPACE/voltha-system-tests;
+              git fetch https://gerrit.opencord.org/voltha-system-tests ${volthaSystemTestsChange} && git checkout FETCH_HEAD
+            fi
+            """)
+        }
+      }
+    }
+    stage('Build patch') {
+      when {
+        expression {
+          return params.GERRIT_PROJECT
+        }
+      }
+      steps {
+        sh """
+        git clone https://\$GERRIT_HOST/\$GERRIT_PROJECT
+        cd \$GERRIT_PROJECT
+        git fetch https://\$GERRIT_HOST/\$GERRIT_PROJECT \$GERRIT_REFSPEC && git checkout FETCH_HEAD
+
+        DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-build
+        DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-push
+        """
+      }
+    }
+    stage('Deploy common infrastructure') {
+      // includes monitoring, kafka, etcd
+      steps {
+        sh '''
+        helm install kafka $HOME/teone/helm-charts/kafka --set replicaCount=${kafkaReplicas} --set persistence.enabled=false \
+          --set zookeeper.replicaCount=${kafkaReplicas} --set zookeeper.persistence.enabled=false \
+          --set prometheus.kafka.enabled=true,prometheus.operator.enabled=true,prometheus.jmx.enabled=true,prometheus.operator.serviceMonitor.namespace=default
+
+        # the ETCD chart use "auth" for resons different than BBsim, so strip that away
+        ETCD_FLAGS=$(echo ${extraHelmFlags} | sed -e 's/--set auth=false / /g') | sed -e 's/--set auth=true / /g'
+        ETCD_FLAGS+=" --set auth.rbac.enabled=false,persistence.enabled=false,statefulset.replicaCount=${etcdReplicas}"
+        ETCD_FLAGS+=" --set memoryMode=${inMemoryEtcdStorage} "
+        helm install -f $WORKSPACE/kind-voltha/values.yaml --set replicas=${etcdReplicas} etcd $HOME/teone/helm-charts/etcd $ETCD_FLAGS
+
+        if [ ${withMonitoring} = true ] ; then
+          helm install nem-monitoring cord/nem-monitoring \
+          -f $HOME/voltha-scale/grafana.yaml \
+          --set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \
+          --set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false
+        fi
+        '''
+      }
+    }
+    stage('Deploy Voltha') {
+      steps {
+        script {
+          sh returnStdout: false, script: """
+
+            cd $WORKSPACE/kind-voltha/
+
+            export EXTRA_HELM_FLAGS+=' '
+
+            # Load the release defaults
+            if [ '${release.trim()}' != 'master' ]; then
+              source $WORKSPACE/kind-voltha/releases/${release}
+              EXTRA_HELM_FLAGS+=" ${extraHelmFlags} "
+            fi
+
+            # BBSim custom image handling
+            if [ '${bbsimImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'bbsim' ]; then
+              IFS=: read -r bbsimRepo bbsimTag <<< '${bbsimImg.trim()}'
+              EXTRA_HELM_FLAGS+="--set images.bbsim.repository=\$bbsimRepo,images.bbsim.tag=\$bbsimTag "
+            fi
+
+            # VOLTHA and ofAgent custom image handling
+            # NOTE to override the rw-core image in a released version you must set the ofAgent image too
+            # TODO split ofAgent and voltha-go
+            if [ '${rwCoreImg.trim()}' != '' ] && [ '${ofAgentImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-go' ]; then
+              IFS=: read -r rwCoreRepo rwCoreTag <<< '${rwCoreImg.trim()}'
+              IFS=: read -r ofAgentRepo ofAgentTag <<< '${ofAgentImg.trim()}'
+              EXTRA_HELM_FLAGS+="--set images.rw_core.repository=\$rwCoreRepo,images.rw_core.tag=\$rwCoreTag,images.ofagent.repository=\$ofAgentRepo,images.ofagent.tag=\$ofAgentTag "
+            fi
+
+            # OpenOLT custom image handling
+            if [ '${openoltAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openolt-adapter' ]; then
+              IFS=: read -r openoltAdapterRepo openoltAdapterTag <<< '${openoltAdapterImg.trim()}'
+              EXTRA_HELM_FLAGS+="--set images.adapter_open_olt.repository=\$openoltAdapterRepo,images.adapter_open_olt.tag=\$openoltAdapterTag "
+            fi
+
+            # OpenONU custom image handling
+            if [ '${openonuAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter' ]; then
+              IFS=: read -r openonuAdapterRepo openonuAdapterTag <<< '${openonuAdapterImg.trim()}'
+              EXTRA_HELM_FLAGS+="--set images.adapter_open_onu.repository=\$openonuAdapterRepo,images.adapter_open_onu.tag=\$openonuAdapterTag "
+            fi
+
+            # OpenONU GO custom image handling
+            if [ '${openonuAdapterGoImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter-go' ]; then
+              IFS=: read -r openonuAdapterGoRepo openonuAdapterGoTag <<< '${openonuAdapterGoImg.trim()}'
+              EXTRA_HELM_FLAGS+="--set images.adapter_open_onu_go.repository=\$openonuAdapterGoRepo,images.adapter_open_onu_go.tag=\$openonuAdapterGoTag "
+            fi
+
+            # ONOS custom image handling
+            if [ '${onosImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-onos' ]; then
+              IFS=: read -r onosRepo onosTag <<< '${onosImg.trim()}'
+              EXTRA_HELM_FLAGS+="--set images.onos.repository=\$onosRepo,images.onos.tag=\$onosTag "
+            fi
+
+            # set BBSim parameters
+            EXTRA_HELM_FLAGS+='--set enablePerf=true,pon=${pons},onu=${onus} '
+
+            # disable the securityContext, this is a development cluster
+            EXTRA_HELM_FLAGS+='--set securityContext.enabled=false '
+
+            # No persistent-volume-claims in Atomix
+            EXTRA_HELM_FLAGS+="--set atomix.persistence.enabled=false "
+
+            echo "Installing with the following extra arguments:"
+            echo $EXTRA_HELM_FLAGS
+
+            # if it's newer than voltha-2.4 set the correct BBSIM_CFG
+            if [ '${release.trim()}' != 'voltha-2.4' ]; then
+              export BBSIM_CFG="$WORKSPACE/kind-voltha/configs/bbsim-sadis-${workflow}.yaml"
+            fi
+
+            # Use custom built images
+
+            if [ '\$GERRIT_PROJECT' == 'voltha-go' ]; then
+              EXTRA_HELM_FLAGS+="--set images.rw_core.repository=${dockerRegistry}/voltha/voltha-rw-core,images.rw_core.tag=voltha-scale "
+            fi
+
+            if [ '\$GERRIT_PROJECT' == 'voltha-openolt-adapter' ]; then
+              EXTRA_HELM_FLAGS+="--set images.adapter_open_olt.repository=${dockerRegistry}/voltha/voltha-openolt-adapter,images.adapter_open_olt.tag=voltha-scale "
+            fi
+
+            if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter' ]; then
+              EXTRA_HELM_FLAGS+="--set images.adapter_open_onu.repository=${dockerRegistry}/voltha/voltha-openonu-adapter,images.adapter_open_onu.tag=voltha-scale "
+            fi
+
+            if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter-go' ]; then
+              EXTRA_HELM_FLAGS+="--set images.adapter_open_onu_go.repository=${dockerRegistry}/voltha/voltha-openonu-adapter-go,images.adapter_open_onu_go.tag=voltha-scale "
+            fi
+
+            if [ '\$GERRIT_PROJECT' == 'ofagent-go' ]; then
+              EXTRA_HELM_FLAGS+="--set images.ofagent.repository=${dockerRegistry}/voltha/voltha-ofagent-go,images.ofagent.tag=voltha-scale "
+            fi
+
+            if [ '\$GERRIT_PROJECT' == 'voltha-onos' ]; then
+              EXTRA_HELM_FLAGS+="--set images.onos.repository=${dockerRegistry}/voltha/voltha-onos,images.onos.tag=voltha-scale "
+            fi
+
+            if [ '\$GERRIT_PROJECT' == 'bbsim' ]; then
+              EXTRA_HELM_FLAGS+="--set images.bbsim.repository=${dockerRegistry}/voltha/bbsim,images.bbsim.tag=voltha-scale "
+            fi
+
+            ./voltha up
+
+            # Forward the ETCD port onto $VOLTHA_ETCD_PORT
+            _TAG=etcd-port-forward kubectl port-forward --address 0.0.0.0 -n default service/etcd $VOLTHA_ETCD_PORT:2379&
+          """
+        }
+        sh returnStdout: false, script: '''
+        # start logging with kail
+
+        mkdir -p $LOG_FOLDER
+
+        list=($APPS_TO_LOG)
+        for app in "${list[@]}"
+        do
+          echo "Starting logs for: ${app}"
+          _TAG=kail-$app kail -l app=$app --since 1h > $LOG_FOLDER/$app.log&
+        done
+        '''
+      }
+    }
+    stage('Configuration') {
+      steps {
+        script {
+          sh returnStdout: false, script: """
+          #Setting link discovery
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled ${withLLDP}
+
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager allowExtraneousRules true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager importExtraneousRules true
+
+
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxBatchMillis 1000
+
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxIdleMillis 500
+
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg log:set ${logLevel} org.onosproject
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg log:set ${logLevel} org.opencord
+
+
+          kubectl exec \$(kubectl get pods | grep -E "bbsim[0-9]" | awk 'NR==1{print \$1}') -- bbsimctl log ${logLevel.toLowerCase()} false
+
+          # Set Flows/Ports/Meters poll frequency
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.flow.impl.OpenFlowRuleProvider flowPollFrequency ${onosStatInterval}
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.device.impl.OpenFlowDeviceProvider portStatsPollFrequency ${onosStatInterval}
+
+          if [ ${withFlows} = false ]; then
+            sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.opencord.olt
+          fi
+
+          if [ ${withMibTemplate} = true ] ; then
+            rm -f BBSM-12345123451234512345-00000000000001-v1.json
+            wget https://raw.githubusercontent.com/opencord/voltha-openonu-adapter/master/templates/BBSM-12345123451234512345-00000000000001-v1.json
+            cat BBSM-12345123451234512345-00000000000001-v1.json | kubectl exec -it \$(kubectl get pods |grep etcd | awk 'NR==1{print \$1}') -- etcdctl put service/voltha/omci_mibs/templates/BBSM/12345123451234512345/00000000000001
+          fi
+
+          if [ ${withPcap} = true ] ; then
+            # Start the tcp-dump in ofagent
+            export OF_AGENT=\$(kubectl get pods -l app=ofagent -o name)
+            kubectl exec \$OF_AGENT -- apk update
+            kubectl exec \$OF_AGENT -- apk add tcpdump
+            kubectl exec \$OF_AGENT -- mv /usr/sbin/tcpdump /usr/bin/tcpdump
+            _TAG=ofagent-tcpdump kubectl exec \$OF_AGENT -- tcpdump -nei eth0 -w out.pcap&
+
+            # Start the tcp-dump in radius
+            export RADIUS=\$(kubectl get pods -l app=radius -o name)
+            kubectl exec \$RADIUS -- apt-get update
+            kubectl exec \$RADIUS -- apt-get install -y tcpdump
+            _TAG=radius-tcpdump kubectl exec \$RADIUS -- tcpdump -w out.pcap&
+
+            # Start the tcp-dump in ONOS
+            for i in \$(seq 0 \$ONOSES); do
+              INSTANCE="onos-onos-classic-\$i"
+              kubectl exec \$INSTANCE -- apt-get update
+              kubectl exec \$INSTANCE -- apt-get install -y tcpdump
+              kubectl exec \$INSTANCE -- mv /usr/sbin/tcpdump /usr/bin/tcpdump
+              _TAG=\$INSTANCE kubectl exec \$INSTANCE -- /usr/bin/tcpdump -nei eth0 port 1812 -w out.pcap&
+            done
+          fi
+          """
+        }
+      }
+    }
+    stage('Run Test') {
+      steps {
+        sh '''
+          mkdir -p $WORKSPACE/RobotLogs
+          cd $WORKSPACE/voltha-system-tests
+          make vst_venv
+        '''
+        sh '''
+          if [ ${withProfiling} = true ] ; then
+            mkdir -p $LOG_FOLDER/pprof
+            echo $PATH
+            #Creating Python script for ONU Detection
+            cat << EOF > $WORKSPACE/pprof.sh
+timestamp() {
+  date +"%T"
+}
+
+i=0
+while [[ true ]]; do
+  ((i++))
+  ts=$(timestamp)
+  go tool pprof -png http://127.0.0.1:6060/debug/pprof/heap > $LOG_FOLDER/pprof/rw-core-heap-\\$i-\\$ts.png
+  go tool pprof -png http://127.0.0.1:6060/debug/pprof/goroutine > $LOG_FOLDER/pprof/rw-core-goroutine-\\$i-\\$ts.png
+  curl -o $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof http://127.0.0.1:6060/debug/pprof/profile?seconds=10
+  go tool pprof -png $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.png
+
+  go tool pprof -png http://127.0.0.1:6061/debug/pprof/heap > $LOG_FOLDER/pprof/openolt-heap-\\$i-\\$ts.png
+  go tool pprof -png http://127.0.0.1:6061/debug/pprof/goroutine > $LOG_FOLDER/pprof/openolt-goroutine-\\$i-\\$ts.png
+  curl -o $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof http://127.0.0.1:6061/debug/pprof/profile?seconds=10
+  go tool pprof -png $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.png
+
+  go tool pprof -png http://127.0.0.1:6062/debug/pprof/heap > $LOG_FOLDER/pprof/ofagent-heap-\\$i-\\$ts.png
+  go tool pprof -png http://127.0.0.1:6062/debug/pprof/goroutine > $LOG_FOLDER/pprof/ofagent-goroutine-\\$i-\\$ts.png
+  curl -o $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof http://127.0.0.1:6062/debug/pprof/profile?seconds=10
+  go tool pprof -png $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.png
+
+  sleep 10
+done
+EOF
+
+            _TAG="pprof"
+            _TAG=$_TAG bash $WORKSPACE/pprof.sh &
+          fi
+        '''
+        timeout(time: 15, unit: 'MINUTES') {
+          sh '''
+            ROBOT_PARAMS="-v olt:${olts} \
+              -v pon:${pons} \
+              -v onu:${onus} \
+              -v workflow:${workflow} \
+              -v withEapol:${withEapol} \
+              -v withDhcp:${withDhcp} \
+              -v withIgmp:${withIgmp} \
+              --noncritical non-critical \
+              -e teardown "
+
+            if [ ${withEapol} = false ] ; then
+              ROBOT_PARAMS+="-e authentication "
+            fi
+
+            if [ ${withDhcp} = false ] ; then
+              ROBOT_PARAMS+="-e dhcp "
+            fi
+
+            if [ ${provisionSubscribers} = false ] ; then
+              # if we're not considering subscribers then we don't care about authentication and dhcp
+              ROBOT_PARAMS+="-e authentication -e provision -e flow-after -e dhcp "
+            fi
+
+            if [ ${withFlows} = false ] ; then
+              ROBOT_PARAMS+="-i setup -i activation "
+            fi
+
+            cd $WORKSPACE/voltha-system-tests
+            source ./vst_venv/bin/activate
+            robot -d $WORKSPACE/RobotLogs \
+            $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
+          '''
+        }
+      }
+    }
+  }
+  post {
+    always {
+      // collect result, done in the "post" step so it's executed even in the
+      // event of a timeout in the tests
+      sh '''
+
+        # stop the kail processes
+        list=($APPS_TO_LOG)
+        for app in "${list[@]}"
+        do
+          echo "Stopping logs for: ${app}"
+          _TAG="kail-$app"
+          P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+          if [ -n "$P_IDS" ]; then
+            echo $P_IDS
+            for P_ID in $P_IDS; do
+              kill -9 $P_ID
+            done
+          fi
+        done
+
+        if [ ${withPcap} = true ] ; then
+          # stop ofAgent tcpdump
+          P_ID="\$(ps e -ww -A | grep "_TAG=ofagent-tcpdump" | grep -v grep | awk '{print \$1}')"
+          if [ -n "\$P_ID" ]; then
+            kill -9 \$P_ID
+          fi
+
+          # stop radius tcpdump
+          P_ID="\$(ps e -ww -A | grep "_TAG=radius-tcpdump" | grep -v grep | awk '{print \$1}')"
+          if [ -n "\$P_ID" ]; then
+            kill -9 \$P_ID
+          fi
+
+          # stop onos tcpdump
+          LIMIT=$(($NUM_OF_ONOS - 1))
+          for i in $(seq 0 $LIMIT); do
+            INSTANCE="onos-onos-classic-$i"
+            P_ID="\$(ps e -ww -A | grep "_TAG=$INSTANCE" | grep -v grep | awk '{print \$1}')"
+            if [ -n "\$P_ID" ]; then
+              kill -9 \$P_ID
+            fi
+          done
+
+          # copy the file
+          export OF_AGENT=$(kubectl get pods -l app=ofagent | awk 'NR==2{print $1}') || true
+          kubectl cp $OF_AGENT:out.pcap $LOG_FOLDER/ofagent.pcap || true
+
+          export RADIUS=$(kubectl get pods -l app=radius | awk 'NR==2{print $1}') || true
+          kubectl cp $RADIUS:out.pcap $LOG_FOLDER/radius.pcap || true
+
+          LIMIT=$(($NUM_OF_ONOS - 1))
+          for i in $(seq 0 $LIMIT); do
+            INSTANCE="onos-onos-classic-$i"
+            kubectl cp $INSTANCE:out.pcap $LOG_FOLDER/$INSTANCE.pcap || true
+          done
+        fi
+
+        cd voltha-system-tests
+        source ./vst_venv/bin/activate
+        python tests/scale/collect-result.py -r $WORKSPACE/RobotLogs/output.xml -p $WORKSPACE/plots > $WORKSPACE/execution-time.txt || true
+        cat $WORKSPACE/execution-time.txt
+      '''
+      sh '''
+        if [ ${withProfiling} = true ] ; then
+          _TAG="pprof"
+          P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+          if [ -n "$P_IDS" ]; then
+            echo $P_IDS
+            for P_ID in $P_IDS; do
+              kill -9 $P_ID
+            done
+          fi
+        fi
+      '''
+      plot([
+        csvFileName: 'scale-test.csv',
+        csvSeries: [
+          [file: 'plots/plot-voltha-onus.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-ports.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-openolt-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-auth.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-openolt-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-dhcp.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+        ],
+        group: 'Voltha-Scale-Numbers', numBuilds: '20', style: 'line', title: "Scale Test (OLTs: ${olts}, PONs: ${pons}, ONUs: ${onus})", yaxis: 'Time (s)', useDescr: true
+      ])
+      step([$class: 'RobotPublisher',
+        disableArchiveOutput: false,
+        logFileName: 'RobotLogs/log.html',
+        otherFiles: '',
+        outputFileName: 'RobotLogs/output.xml',
+        outputPath: '.',
+        passThreshold: 100,
+        reportFileName: 'RobotLogs/report.html',
+        unstableThreshold: 0]);
+      // get all the logs from kubernetes PODs
+      sh returnStdout: false, script: '''
+
+        # store information on running charts
+        helm ls > $LOG_FOLDER/helm-list.txt || true
+
+        # store information on the running pods
+        kubectl get pods -o wide > $LOG_FOLDER/pods.txt || true
+        kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-images.txt || true
+        kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-imagesId.txt || true
+
+        # copy the ONOS logs directly from the container to avoid the color codes
+        printf '%s\n' $(kubectl get pods -l app=onos-onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs --no-run-if-empty -I# bash -c "kubectl cp #:${karafHome}/data/log/karaf.log $LOG_FOLDER/#.log" || true
+
+        # get radius logs out of the container
+        kubectl cp $(kubectl get pods -l app=radius --no-headers  | awk '{print $1}'):/var/log/freeradius/radius.log $LOG_FOLDER//radius.log || true
+      '''
+      // dump all the BBSim(s) ONU information
+      sh '''
+      BBSIM_IDS=$(kubectl get pods | grep bbsim | grep -v server | awk '{print $1}')
+      IDS=($BBSIM_IDS)
+
+      for bbsim in "${IDS[@]}"
+      do
+        kubectl exec -t $bbsim -- bbsimctl onu list > $LOG_FOLDER/$bbsim-device-list.txt || true
+        kubectl exec -t $bbsim -- bbsimctl service list > $LOG_FOLDER/$bbsim-service-list.txt || true
+      done
+      '''
+      // get DHCP server stats
+      sh '''
+      BBSIM_IDS=$(kubectl get pods | grep bbsim | grep -v server | awk '{print $1}')
+      IDS=($BBSIM_IDS)
+
+      for bbsim in "${IDS[@]}"
+      do
+        kubectl exec -t $bbsim -- dhcpd -lf /var/lib/dhcp/dhcpd.leases -play /tmp/dhcplog 2>&1 | tee $LOG_FOLDER/$bbsim-dhcp-replay.txt || true
+        kubectl cp $bbsim:/tmp/dhcplog $LOG_FOLDER/$bbsim-dhcp-logs || true
+        kubectl cp $bbsim:/var/lib/dhcp/dhcpd.leases $LOG_FOLDER/$bbsim-dhcp-leases || true
+      done
+      '''
+      // get ONOS debug infos
+      sh '''
+
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 apps -a -s > $LOG_FOLDER/onos-apps.txt || true
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 nodes > $LOG_FOLDER/onos-nodes.txt || true
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 masters > $LOG_FOLDER/onos-masters.txt || true
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 roles > $LOG_FOLDER/onos-roles.txt || true
+
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 ports > $LOG_FOLDER/onos-ports-list.txt || true
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 hosts > $LOG_FOLDER/onos-hosts-list.txt || true
+
+        if [ ${withFlows} = true ] ; then
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-olts > $LOG_FOLDER/onos-olt-list.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 flows -s > $LOG_FOLDER/onos-flows-list.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 meters > $LOG_FOLDER/onos-meters-list.txt || true
+        fi
+
+        if [ ${provisionSubscribers} = true ]; then
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-subscribers > $LOG_FOLDER/onos-programmed-subscribers.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-meters > $LOG_FOLDER/onos-programmed-meters.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-bpmeter-mappings > $LOG_FOLDER/onos-bpmeter-mappings.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-failed-subscribers > $LOG_FOLDER/onos-failed-subscribers.txt || true
+        fi
+
+        if [ ${withEapol} = true ] ; then
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-users > $LOG_FOLDER/onos-aaa-users.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-statistics > $LOG_FOLDER/onos-aaa-statistics.txt || true
+        fi
+
+        if [ ${withDhcp} = true ] ; then
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 dhcpl2relay-allocations > $LOG_FOLDER/onos-dhcp-allocations.txt || true
+        fi
+      '''
+      // collect etcd metrics
+      sh '''
+        mkdir -p $WORKSPACE/etcd-metrics
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_keys_total' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-key-count.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=grpc_server_handled_total{grpc_service="etcdserverpb.KV"}' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-rpc-count.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_db_total_size_in_bytes' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-db-size.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data'  > $WORKSPACE/etcd-metrics/etcd-backend-write-time.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data'  > $WORKSPACE/etcd-metrics/etcd-backend-write-time-sum.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_bucket' | jq '.data'  > $WORKSPACE/etcd-metrics/etcd-backend-write-time-bucket.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_wal_fsync_duration_seconds_bucket' | jq '.data'  > $WORKSPACE/etcd-metrics/etcd-wal-fsync-time-bucket.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_network_peer_round_trip_time_seconds_bucket' | jq '.data'  > $WORKSPACE/etcd-metrics/etcd-network-peer-round-trip-time-seconds.json || true
+
+      '''
+      // get VOLTHA debug infos
+      script {
+        try {
+          sh '''
+          voltctl -m 8MB device list -o json > $LOG_FOLDER/device-list.json || true
+          python -m json.tool $LOG_FOLDER/device-list.json > $LOG_FOLDER/voltha-devices-list.json || true
+          rm $LOG_FOLDER/device-list.json || true
+          voltctl -m 8MB device list > $LOG_FOLDER/voltha-devices-list.txt || true
+
+          printf '%s\n' $(voltctl -m 8MB device list | grep olt | awk '{print $1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB device flows # > $LOG_FOLDER/voltha-device-flows-#.txt" || true
+              printf '%s\n' $(voltctl -m 8MB device list | grep olt | awk '{print $1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB device port list --format 'table{{.PortNo}}\t{{.Label}}\t{{.Type}}\t{{.AdminState}}\t{{.OperStatus}}' # > $LOG_FOLDER/voltha-device-ports-#.txt" || true
+
+          printf '%s\n' $(voltctl -m 8MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB logicaldevice flows # > $LOG_FOLDER/voltha-logicaldevice-flows-#.txt" || true
+          printf '%s\n' $(voltctl -m 8MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 8MB logicaldevice port list # > $LOG_FOLDER/voltha-logicaldevice-ports-#.txt" || true
+          '''
+        } catch(e) {
+          sh '''
+          echo "Can't get device list from voltclt"
+          '''
+        }
+      }
+      // get cpu usage by container
+      sh '''
+      if [ ${withMonitoring} = true ] ; then
+        cd $WORKSPACE/voltha-system-tests
+        source ./vst_venv/bin/activate
+        sleep 60 # we have to wait for prometheus to collect all the information
+        python tests/scale/sizing.py -o $WORKSPACE/plots || true
+      fi
+      '''
+      archiveArtifacts artifacts: 'kind-voltha/install-minimal.log,execution-time.txt,logs/*,logs/pprof/*,RobotLogs/*,plots/*,etcd-metrics/*'
+    }
+  }
+}
diff --git a/jjb/pipeline/voltha-scale-test.groovy b/jjb/pipeline/voltha-scale-test.groovy
index 4dc58ae..ae0f63f 100644
--- a/jjb/pipeline/voltha-scale-test.groovy
+++ b/jjb/pipeline/voltha-scale-test.groovy
@@ -12,7 +12,7 @@
 // See the License for the specific language governing permissions and
 // limitations under the License.
 
-// deploy VOLTHA using kind-voltha and performs a scale test
+// deploy VOLTHA and performs a scale test
 
 pipeline {
 
@@ -28,42 +28,36 @@
     KUBECONFIG="$HOME/.kube/config"
     VOLTCONFIG="$HOME/.volt/config"
     SSHPASS="karaf"
-    PATH="$PATH:$WORKSPACE/kind-voltha/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
-    SCHEDULE_ON_CONTROL_NODES="yes"
-    FANCY=0
-    WITH_SIM_ADAPTERS="no"
-    WITH_RADIUS="${withRadius}"
-    WITH_BBSIM="yes"
-    LEGACY_BBSIM_INDEX="no"
-    DEPLOY_K8S="no"
-    CONFIG_SADIS="external"
-    WITH_KAFKA="kafka.default.svc.cluster.local"
-    WITH_ETCD="etcd.default.svc.cluster.local"
-    VOLTHA_ETCD_PORT=9999
-
-    // install everything in the default namespace
-    VOLTHA_NS="default"
-    ADAPTER_NS="default"
-    INFRA_NS="default"
-    BBSIM_NS="default"
+    // PATH="$PATH:$WORKSPACE/kind-voltha/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+    // SCHEDULE_ON_CONTROL_NODES="yes"
+    // FANCY=0
+    // WITH_SIM_ADAPTERS="no"
+    // WITH_RADIUS="${withRadius}"
+    // WITH_BBSIM="yes"
+    // LEGACY_BBSIM_INDEX="no"
+    // DEPLOY_K8S="no"
+    // CONFIG_SADIS="external"
+    // WITH_KAFKA="kafka.default.svc.cluster.local"
+    // WITH_ETCD="etcd.default.svc.cluster.local"
+    // VOLTHA_ETCD_PORT=9999
 
     // configurable options
-    WITH_EAPOL="${withEapol}"
-    WITH_DHCP="${withDhcp}"
-    WITH_IGMP="${withIgmp}"
+    // WITH_EAPOL="${withEapol}"
+    // WITH_DHCP="${withDhcp}"
+    // WITH_IGMP="${withIgmp}"
     VOLTHA_LOG_LEVEL="${logLevel}"
     NUM_OF_BBSIM="${olts}"
     NUM_OF_OPENONU="${openonuAdapterReplicas}"
     NUM_OF_ONOS="${onosReplicas}"
     NUM_OF_ATOMIX="${atomixReplicas}"
-    WITH_PPROF="${withProfiling}"
+    // WITH_PPROF="${withProfiling}"
     EXTRA_HELM_FLAGS="${extraHelmFlags} " // note that the trailing space is required to separate the parameters from appends done later
-    VOLTHA_CHART="${volthaChart}"
-    VOLTHA_BBSIM_CHART="${bbsimChart}"
-    VOLTHA_ADAPTER_OPEN_OLT_CHART="${openoltAdapterChart}"
-    VOLTHA_ADAPTER_OPEN_ONU_CHART="${openonuAdapterChart}"
-    ONOS_CLASSIC_CHART="${onosChart}"
-    RADIUS_CHART="${radiusChart}"
+    // VOLTHA_CHART="${volthaChart}"
+    // VOLTHA_BBSIM_CHART="${bbsimChart}"
+    // VOLTHA_ADAPTER_OPEN_OLT_CHART="${openoltAdapterChart}"
+    // VOLTHA_ADAPTER_OPEN_ONU_CHART="${openonuAdapterChart}"
+    // ONOS_CLASSIC_CHART="${onosChart}"
+    // RADIUS_CHART="${radiusChart}"
 
     APPS_TO_LOG="etcd kafka onos-onos-classic adapter-open-onu adapter-open-olt rw-core ofagent bbsim radius bbsim-sadis-server"
     LOG_FOLDER="$WORKSPACE/logs"
@@ -75,64 +69,35 @@
     stage ('Cleanup') {
       steps {
         timeout(time: 11, unit: 'MINUTES') {
-          sh returnStdout: false, script: """
-            helm repo add stable https://charts.helm.sh/stable
+          sh returnStdout: false, script: '''
             helm repo add onf https://charts.opencord.org
-            helm repo add cord https://charts.opencord.org
-            helm repo add onos https://charts.onosproject.org
-            helm repo add atomix https://charts.atomix.io
-            helm repo add bbsim-sadis https://ciena.github.io/bbsim-sadis-server/charts
             helm repo update
 
-            # removing ETCD port forward
-            P_ID="\$(ps e -ww -A | grep "_TAG=etcd-port-forward" | grep -v grep | awk '{print \$1}')"
-            if [ -n "\$P_ID" ]; then
-              kill -9 \$P_ID
-            fi
-
             NAMESPACES="voltha1 voltha2 infra default"
-            for NS in \$NAMESPACES
+            for NS in $NAMESPACES
             do
-                for hchart in \$(helm list -n \$NS -q | grep -E -v 'docker-registry|kafkacat');
+                for hchart in $(helm list -n $NS -q | grep -E -v 'docker-registry|kafkacat');
                 do
-                    echo "Purging chart: \${hchart}"
-                    helm delete -n \$NS "\${hchart}"
+                    echo "Purging chart: ${hchart}"
+                    helm delete -n $NS "${hchart}"
                 done
             done
 
-            test -e $WORKSPACE/kind-voltha/voltha && cd $WORKSPACE/kind-voltha && ./voltha down
+            # wait for pods to be removed
+            echo -ne "\nWaiting for PODs to be removed..."
+            PODS=$(kubectl get pods --all-namespaces --no-headers  | grep -v -E "kube|cattle|registry" | wc -l)
+            while [[ $PODS != 0 ]]; do
+              sleep 5
+              echo -ne "."
+              PODS=$(kubectl get pods --all-namespaces --no-headers  | grep -v -E "kube|cattle|registry" | wc -l)
+            done
 
             # remove orphaned port-forward from different namespaces
-            ps aux | grep port-forw | grep -v grep | awk '{print \$2}' | xargs --no-run-if-empty kill -9
+            ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9
 
             cd $WORKSPACE
             rm -rf $WORKSPACE/*
-          """
-        }
-      }
-    }
-    stage('Clone kind-voltha') {
-      steps {
-        checkout([
-          $class: 'GitSCM',
-          userRemoteConfigs: [[
-            url: "https://gerrit.opencord.org/kind-voltha",
-            refspec: "${kindVolthaChange}"
-          ]],
-          branches: [[ name: "master", ]],
-          extensions: [
-            [$class: 'WipeWorkspace'],
-            [$class: 'RelativeTargetDirectory', relativeTargetDir: "kind-voltha"],
-            [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
-          ],
-        ])
-        script {
-          sh(script:"""
-          if [ '${kindVolthaChange}' != '' ] ; then
-            cd $WORKSPACE/kind-voltha;
-            git fetch https://gerrit.opencord.org/kind-voltha ${kindVolthaChange} && git checkout FETCH_HEAD
-          fi
-          """)
+          '''
         }
       }
     }
@@ -161,6 +126,31 @@
         }
       }
     }
+    stage('Clone voltha-helm-charts') {
+      steps {
+        checkout([
+          $class: 'GitSCM',
+          userRemoteConfigs: [[
+            url: "https://gerrit.opencord.org/voltha-helm-charts",
+            refspec: "${volthaHelmChartsChange}"
+          ]],
+          branches: [[ name: "master", ]],
+          extensions: [
+            [$class: 'WipeWorkspace'],
+            [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-helm-charts"],
+            [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+          ],
+        ])
+        script {
+          sh(script:"""
+            if [ '${volthaHelmChartsChange}' != '' ] ; then
+              cd $WORKSPACE/voltha-helm-charts;
+              git fetch https://gerrit.opencord.org/voltha-helm-charts ${volthaHelmChartsChange} && git checkout FETCH_HEAD
+            fi
+            """)
+        }
+      }
+    }
     stage('Build patch') {
       when {
         expression {
@@ -182,7 +172,7 @@
       // includes monitoring, kafka, etcd
       steps {
         sh '''
-        helm install kafka $HOME/teone/helm-charts/kafka --set replicaCount=${kafkaReplicas} --set persistence.enabled=false \
+        helm install kafka $HOME/teone/helm-charts/kafka --set replicaCount=${kafkaReplicas},replicas=${kafkaReplicas} --set persistence.enabled=false \
           --set zookeeper.replicaCount=${kafkaReplicas} --set zookeeper.persistence.enabled=false \
           --set prometheus.kafka.enabled=true,prometheus.operator.enabled=true,prometheus.jmx.enabled=true,prometheus.operator.serviceMonitor.namespace=default
 
@@ -190,10 +180,10 @@
         ETCD_FLAGS=$(echo ${extraHelmFlags} | sed -e 's/--set auth=false / /g') | sed -e 's/--set auth=true / /g'
         ETCD_FLAGS+=" --set auth.rbac.enabled=false,persistence.enabled=false,statefulset.replicaCount=${etcdReplicas}"
         ETCD_FLAGS+=" --set memoryMode=${inMemoryEtcdStorage} "
-        helm install -f $WORKSPACE/kind-voltha/values.yaml --set replicas=${etcdReplicas} etcd $HOME/teone/helm-charts/etcd $ETCD_FLAGS
+        helm install --set replicas=${etcdReplicas} etcd $HOME/teone/helm-charts/etcd $ETCD_FLAGS
 
         if [ ${withMonitoring} = true ] ; then
-          helm install nem-monitoring cord/nem-monitoring \
+          helm install nem-monitoring onf/nem-monitoring \
           -f $HOME/voltha-scale/grafana.yaml \
           --set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \
           --set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false
@@ -206,53 +196,48 @@
         script {
           sh returnStdout: false, script: """
 
-            cd $WORKSPACE/kind-voltha/
-
             export EXTRA_HELM_FLAGS+=' '
 
-            # Load the release defaults
-            if [ '${release.trim()}' != 'master' ]; then
-              source $WORKSPACE/kind-voltha/releases/${release}
-              EXTRA_HELM_FLAGS+=" ${extraHelmFlags} "
-            fi
-
             # BBSim custom image handling
             if [ '${bbsimImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'bbsim' ]; then
               IFS=: read -r bbsimRepo bbsimTag <<< '${bbsimImg.trim()}'
               EXTRA_HELM_FLAGS+="--set images.bbsim.repository=\$bbsimRepo,images.bbsim.tag=\$bbsimTag "
             fi
 
-            # VOLTHA and ofAgent custom image handling
-            # NOTE to override the rw-core image in a released version you must set the ofAgent image too
-            # TODO split ofAgent and voltha-go
-            if [ '${rwCoreImg.trim()}' != '' ] && [ '${ofAgentImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-go' ]; then
+            # VOLTHA custom image handling
+            if [ '${rwCoreImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-go' ]; then
               IFS=: read -r rwCoreRepo rwCoreTag <<< '${rwCoreImg.trim()}'
+              EXTRA_HELM_FLAGS+="--set voltha.images.rw_core.repository=\$rwCoreRepo,voltha.images.rw_core.tag=\$rwCoreTag "
+            fi
+
+            # ofAgent custom image handling
+            if [ '${ofAgentImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'of-agent' ]; then
               IFS=: read -r ofAgentRepo ofAgentTag <<< '${ofAgentImg.trim()}'
-              EXTRA_HELM_FLAGS+="--set images.rw_core.repository=\$rwCoreRepo,images.rw_core.tag=\$rwCoreTag,images.ofagent.repository=\$ofAgentRepo,images.ofagent.tag=\$ofAgentTag "
+              EXTRA_HELM_FLAGS+="--set voltha.images.ofagent.repository=\$ofAgentRepo,voltha.images.ofagent.tag=\$ofAgentTag "
             fi
 
             # OpenOLT custom image handling
             if [ '${openoltAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openolt-adapter' ]; then
               IFS=: read -r openoltAdapterRepo openoltAdapterTag <<< '${openoltAdapterImg.trim()}'
-              EXTRA_HELM_FLAGS+="--set images.adapter_open_olt.repository=\$openoltAdapterRepo,images.adapter_open_olt.tag=\$openoltAdapterTag "
+              EXTRA_HELM_FLAGS+="--set voltha-adapter-openolt.images.adapter_open_olt.repository=\$openoltAdapterRepo,voltha-adapter-openolt.images.adapter_open_olt.tag=\$openoltAdapterTag "
             fi
 
             # OpenONU custom image handling
             if [ '${openonuAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter' ]; then
               IFS=: read -r openonuAdapterRepo openonuAdapterTag <<< '${openonuAdapterImg.trim()}'
-              EXTRA_HELM_FLAGS+="--set images.adapter_open_onu.repository=\$openonuAdapterRepo,images.adapter_open_onu.tag=\$openonuAdapterTag "
+              EXTRA_HELM_FLAGS+="--set voltha-adapter-openonu.images.adapter_open_onu.repository=\$openonuAdapterRepo,voltha-adapter-openonu.images.adapter_open_onu.tag=\$openonuAdapterTag "
             fi
 
             # OpenONU GO custom image handling
             if [ '${openonuAdapterGoImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter-go' ]; then
               IFS=: read -r openonuAdapterGoRepo openonuAdapterGoTag <<< '${openonuAdapterGoImg.trim()}'
-              EXTRA_HELM_FLAGS+="--set images.adapter_open_onu_go.repository=\$openonuAdapterGoRepo,images.adapter_open_onu_go.tag=\$openonuAdapterGoTag "
+              EXTRA_HELM_FLAGS+="--set voltha-adapter-openonu.images.adapter_open_onu_go.repository=\$openonuAdapterGoRepo,voltha-adapter-openonu.images.adapter_open_onu_go.tag=\$openonuAdapterGoTag "
             fi
 
             # ONOS custom image handling
             if [ '${onosImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-onos' ]; then
               IFS=: read -r onosRepo onosTag <<< '${onosImg.trim()}'
-              EXTRA_HELM_FLAGS+="--set images.onos.repository=\$onosRepo,images.onos.tag=\$onosTag "
+              EXTRA_HELM_FLAGS+="--set onos-classic.images.onos.repository=\$onosRepo,onos-classic.images.onos.tag=\$onosTag "
             fi
 
             # set BBSim parameters
@@ -262,50 +247,86 @@
             EXTRA_HELM_FLAGS+='--set securityContext.enabled=false '
 
             # No persistent-volume-claims in Atomix
-            EXTRA_HELM_FLAGS+="--set atomix.persistence.enabled=false "
+            EXTRA_HELM_FLAGS+="--set onos-classic.atomix.persistence.enabled=false "
 
             echo "Installing with the following extra arguments:"
             echo $EXTRA_HELM_FLAGS
 
-            # if it's newer than voltha-2.4 set the correct BBSIM_CFG
-            if [ '${release.trim()}' != 'voltha-2.4' ]; then
-              export BBSIM_CFG="$WORKSPACE/kind-voltha/configs/bbsim-sadis-${workflow}.yaml"
-            fi
+
 
             # Use custom built images
 
             if [ '\$GERRIT_PROJECT' == 'voltha-go' ]; then
-              EXTRA_HELM_FLAGS+="--set images.rw_core.repository=${dockerRegistry}/voltha/voltha-rw-core,images.rw_core.tag=voltha-scale "
+              EXTRA_HELM_FLAGS+="--set voltha.images.rw_core.repository=${dockerRegistry}/voltha/voltha-rw-core,voltha.images.rw_core.tag=voltha-scale "
             fi
 
             if [ '\$GERRIT_PROJECT' == 'voltha-openolt-adapter' ]; then
-              EXTRA_HELM_FLAGS+="--set images.adapter_open_olt.repository=${dockerRegistry}/voltha/voltha-openolt-adapter,images.adapter_open_olt.tag=voltha-scale "
+              EXTRA_HELM_FLAGS+="--set voltha-openolt-adapter.images.adapter_open_olt.repository=${dockerRegistry}/voltha/voltha-openolt-adapter,voltha-openolt-adapter.images.adapter_open_olt.tag=voltha-scale "
             fi
 
             if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter' ]; then
-              EXTRA_HELM_FLAGS+="--set images.adapter_open_onu.repository=${dockerRegistry}/voltha/voltha-openonu-adapter,images.adapter_open_onu.tag=voltha-scale "
+              EXTRA_HELM_FLAGS+="--set voltha-openonu-adapter.images.adapter_open_onu.repository=${dockerRegistry}/voltha/voltha-openonu-adapter,voltha-openonu-adapter.images.adapter_open_onu.tag=voltha-scale "
             fi
 
             if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter-go' ]; then
-              EXTRA_HELM_FLAGS+="--set images.adapter_open_onu_go.repository=${dockerRegistry}/voltha/voltha-openonu-adapter-go,images.adapter_open_onu_go.tag=voltha-scale "
+              EXTRA_HELM_FLAGS+="--set voltha-openonu-adapter-go.images.adapter_open_onu_go.repository=${dockerRegistry}/voltha/voltha-openonu-adapter-go,voltha-openonu-adapter-go.images.adapter_open_onu_go.tag=voltha-scale "
             fi
 
             if [ '\$GERRIT_PROJECT' == 'ofagent-go' ]; then
-              EXTRA_HELM_FLAGS+="--set images.ofagent.repository=${dockerRegistry}/voltha/voltha-ofagent-go,images.ofagent.tag=voltha-scale "
+              EXTRA_HELM_FLAGS+="--set voltha.images.ofagent.repository=${dockerRegistry}/voltha/voltha-ofagent-go,ofagent-go.images.ofagent.tag=voltha-scale "
             fi
 
             if [ '\$GERRIT_PROJECT' == 'voltha-onos' ]; then
-              EXTRA_HELM_FLAGS+="--set images.onos.repository=${dockerRegistry}/voltha/voltha-onos,images.onos.tag=voltha-scale "
+              EXTRA_HELM_FLAGS+="--set onos-classic.images.onos.repository=${dockerRegistry}/voltha/voltha-onos,onos-classic.images.onos.tag=voltha-scale "
             fi
 
             if [ '\$GERRIT_PROJECT' == 'bbsim' ]; then
               EXTRA_HELM_FLAGS+="--set images.bbsim.repository=${dockerRegistry}/voltha/bbsim,images.bbsim.tag=voltha-scale "
             fi
 
-            ./voltha up
+            helm upgrade --install voltha-infra onf/voltha-infra \
+              --set onos-classic.replicas=${onosReplicas},onos-classic.atomix.replicas=${atomixReplicas} \
+              --set etcd.enabled=false,kafka.enabled=false \
+              --set global.log_level=${logLevel} \
+              -f $WORKSPACE/voltha-helm-charts/examples/${workflow}-values.yaml
 
-            # Forward the ETCD port onto $VOLTHA_ETCD_PORT
-            _TAG=etcd-port-forward kubectl port-forward --address 0.0.0.0 -n default service/etcd $VOLTHA_ETCD_PORT:2379&
+            helm upgrade --install voltha1 onf/voltha-stack \
+              --set global.stack_name=voltha1 \
+              --set global.voltha_infra_name=voltha-infra \
+              --set global.voltha_infra_namespace=default \
+              --set global.log_level=${logLevel} \
+              --set voltha.services.kafka.adapter.address=kafka.default.svc:9092 \
+              --set voltha.services.kafka.cluster.address=kafka.default.svc:9092 \
+              --set voltha.services.etcd.address=etcd.default.svc:2379 \
+              --set voltha-adapter-openolt.services.kafka.adapter.address=kafka.default.svc:9092 \
+              --set voltha-adapter-openolt.services.kafka.cluster.address=kafka.default.svc:9092 \
+              --set voltha-adapter-openolt.services.etcd.address=etcd.default.svc:2379 \
+              --set voltha-adapter-openonu.services.kafka.adapter.service=kafka.default.svc \
+              --set voltha-adapter-openonu.services.kafka.cluster.service=kafka.default.svc \
+              --set voltha-adapter-openonu.services.etcd.service=etcd.default.svc
+              # TODO having to set all of these values is annoying, is there a better solution?
+
+
+            for i in {0..${olts.toInteger() - 1}}; do
+              stackId=1
+              helm upgrade --install bbsim\$i onf/bbsim --set olt_id="\${stackId}\${i}" \
+                --set onu=${onus},pon=${pons} \
+                --set global.log_level=${logLevel.toLowerCase()} \
+                -f $WORKSPACE/voltha-helm-charts/examples/${workflow}-values.yaml
+            done
+
+            echo -ne "\nWaiting for VOLTHA to start..."
+            voltha=\$(kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l)
+            while [[ \$voltha != 0 ]]; do
+              sleep 5
+              echo -ne "."
+              voltha=\$(kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l)
+            done
+
+            # forward ONOS and VOLTHA ports
+            _TAG=onos-port-forward kubectl port-forward --address 0.0.0.0 -n default svc/voltha-infra-onos-classic-hs 8101:8101&
+            _TAG=onos-port-forward kubectl port-forward --address 0.0.0.0 -n default svc/voltha-infra-onos-classic-hs 8181:8181&
+            _TAG=voltha-port-forward kubectl port-forward --address 0.0.0.0 -n default svc/voltha1-voltha-api 55555:55555&
           """
         }
         sh returnStdout: false, script: '''
@@ -351,12 +372,6 @@
             sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.opencord.olt
           fi
 
-          if [ ${withMibTemplate} = true ] ; then
-            rm -f BBSM-12345123451234512345-00000000000001-v1.json
-            wget https://raw.githubusercontent.com/opencord/voltha-openonu-adapter/master/templates/BBSM-12345123451234512345-00000000000001-v1.json
-            cat BBSM-12345123451234512345-00000000000001-v1.json | kubectl exec -it \$(kubectl get pods |grep etcd | awk 'NR==1{print \$1}') -- etcdctl put service/voltha/omci_mibs/templates/BBSM/12345123451234512345/00000000000001
-          fi
-
           if [ ${withPcap} = true ] ; then
             # Start the tcp-dump in ofagent
             export OF_AGENT=\$(kubectl get pods -l app=ofagent -o name)
@@ -682,7 +697,7 @@
         python tests/scale/sizing.py -o $WORKSPACE/plots || true
       fi
       '''
-      archiveArtifacts artifacts: 'kind-voltha/install-minimal.log,execution-time.txt,logs/*,logs/pprof/*,RobotLogs/*,plots/*,etcd-metrics/*'
+      archiveArtifacts artifacts: 'execution-time.txt,logs/*,logs/pprof/*,RobotLogs/*,plots/*,etcd-metrics/*'
     }
   }
 }
diff --git a/jjb/verify/up4.yaml b/jjb/verify/up4.yaml
index 3c3327f..17788a6 100644
--- a/jjb/verify/up4.yaml
+++ b/jjb/verify/up4.yaml
@@ -19,6 +19,7 @@
     name: "up4-jobs"
     jobs:
       - "up4-pr-verify"
+      - "up4-postmerge"
 
 - job-template:
     id: "up4-pr-verify"
diff --git a/jjb/voltha-scale.yaml b/jjb/voltha-scale.yaml
index 009aa86..0b6e316 100644
--- a/jjb/voltha-scale.yaml
+++ b/jjb/voltha-scale.yaml
@@ -264,6 +264,7 @@
       # voltha-2.6 Jobs
       - 'voltha-scale-measurements':
           name: 'voltha-scale-measurements-voltha-2.6-1-16-32-att-subscribers'
+          pipeline-script: 'voltha-scale-test-2.6.groovy'
           'disable-job': false
           build-node: 'onf-pod1-head-node'
           time-trigger: "H H/4 * * *"
@@ -286,6 +287,7 @@
 
       - 'voltha-scale-measurements':
           name: 'voltha-scale-measurements-voltha-2.6-2-16-32-dt-subscribers'
+          pipeline-script: 'voltha-scale-test-2.6.groovy'
           'disable-job': false
           build-node: 'onf-pod1-head-node'
           time-trigger: "H H/4 * * *"
@@ -309,6 +311,7 @@
 
       - 'voltha-scale-measurements':
           name: 'voltha-scale-measurements-voltha-2.6-1-16-32-tt-subscribers'
+          pipeline-script: 'voltha-scale-test-2.6.groovy'
           'disable-job': false
           build-node: 'onf-pod1-head-node'
           time-trigger: "H H/4 * * *"
@@ -545,11 +548,6 @@
           description: 'Wheter Link Discovery is enabled for the test'
 
       - bool:
-          name: withMibTemplate
-          default: '{withMibTemplate}'
-          description: 'Option to trigger MIB template command'
-
-      - bool:
           name: withMonitoring
           default: '{withMonitoring}'
           description: 'Option to install Prometheus'
@@ -675,8 +673,8 @@
           description: 'Download a change for gerrit in the voltha-system-tests repo, example value: "refs/changes/79/18779/13"'
 
       - string:
-          name: kindVolthaChange
-          default: '{kindVolthaChange}'
+          name: volthaHelmChartsChange
+          default: '{volthaHelmChartsChange}'
           description: 'Download a change for gerrit in the kind-voltha repo, example value: "refs/changes/32/19132/1"'
 
       - bool:
@@ -740,7 +738,6 @@
     withDhcp: true
     withIgmp: false
     withLLDP: false
-    withMibTemplate: true
     withMonitoring: true
     withProfiling: false
     withPcap: false
@@ -753,7 +750,7 @@
     extraHelmFlags: ''
     onosStatInterval: 5
     volthaSystemTestsChange: ''
-    kindVolthaChange: ''
+    volthaHelmChartsChange: ''
     inMemoryEtcdStorage: true
     karafHome: 'apache-karaf-4.2.9'
     logLevel: 'INFO'
@@ -842,7 +839,6 @@
     withDhcp: true
     withIgmp: false
     withLLDP: false
-    withMibTemplate: true
     withMonitoring: false
     withProfiling: false
     withPcap: false
@@ -855,7 +851,7 @@
     extraHelmFlags: ''
     onosStatInterval: 5
     volthaSystemTestsChange: ''
-    kindVolthaChange: ''
+    volthaHelmChartsChange: ''
     inMemoryEtcdStorage: true
     karafHome: 'apache-karaf-4.2.9'
     logLevel: 'INFO'
@@ -910,7 +906,7 @@
     release: master
     build-node: 'voltha-scale'
     volthaSystemTestsChange: ''
-    kindVolthaChange: ''
+    volthaHelmChartsChange: ''
     onosReplicas: 1
     atomixReplicas: 0
     kafkaReplicas: 1
@@ -940,9 +936,9 @@
           description: 'Download a change for gerrit in the voltha-system-tests repo, example value: "refs/changes/79/18779/13"'
 
       - string:
-          name: kindVolthaChange
-          default: '{kindVolthaChange}'
-          description: 'Download a change for gerrit in the kind-voltha repo, example value: "refs/changes/32/19132/1"'
+          name: volthaHelmChartsChange
+          default: '{volthaHelmChartsChange}'
+          description: 'Download a change for gerrit in the voltha-helm-charts repo, example value: "refs/changes/32/19132/1"'
 
       - string:
           name: onosReplicas