diff --git a/jjb/pipeline/voltha/voltha-2.12/tucson-build-and-test.groovy b/jjb/pipeline/voltha/voltha-2.12/tucson-build-and-test.groovy
new file mode 100644
index 0000000..81b26ab
--- /dev/null
+++ b/jjb/pipeline/voltha/voltha-2.12/tucson-build-and-test.groovy
@@ -0,0 +1,367 @@
+// Copyright 2017-2023 Open Networking Foundation (ONF) and the ONF Contributors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// used to deploy VOLTHA and configure ONOS physical PODs
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+def infraNamespace = "infra"
+def volthaNamespace = "voltha"
+def clusterName = "kind-ci"
+pipeline {
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+    timeout(time: 120, unit: 'MINUTES')
+  }
+  environment {
+    PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+    KUBECONFIG="$HOME/.kube/kind-${clusterName}"
+    VOLTCONFIG="$HOME/.volt/config"
+    LOG_FOLDER="$WORKSPACE/${workflow}/"
+    APPS_TO_LOG="etcd kafka onos-classic adapter-open-onu adapter-open-olt rw-core ofagent bbsim radius bbsim-sadis-server onos-config-loader"
+
+  }
+  stages{
+    stage('Download Code') {
+      steps {
+        getVolthaCode([
+          branch: "${branch}",
+          gerritProject: "${gerritProject}",
+          gerritRefspec: "${gerritRefspec}",
+          volthaSystemTestsChange: "${volthaSystemTestsChange}",
+          volthaHelmChartsChange: "${volthaHelmChartsChange}",
+        ])
+      }
+    }
+    stage ("Parse deployment configuration file") {
+      steps {
+        sh returnStdout: true, script: "rm -rf ${configBaseDir}"
+        sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
+        script {
+
+          if (params.workflow.toUpperCase() == "TT") {
+            error("The Tucson POD does not support TT workflow at the moment")
+          }
+
+          if ( params.workflow.toUpperCase() == "DT" ) {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+          }
+          else if ( params.workflow.toUpperCase() == "TT" ) {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+          }
+          else {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+          }
+        }
+      }
+    }
+    stage('Clean up') {
+      steps {
+        timeout(15) {
+          script {
+            helmTeardown(["default", infraNamespace, volthaNamespace])
+          }
+          timeout(1) {
+            sh returnStdout: false, script: '''
+            # remove orphaned port-forward from different namespaces
+            ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
+            '''
+          }
+        }
+      }
+    }
+    stage('Build patch') {
+      steps {
+        // NOTE that the correct patch has already been checked out
+        // during the getVolthaCode step
+        buildVolthaComponent("${gerritProject}")
+      }
+    }
+    stage('Create K8s Cluster') {
+      steps {
+        script {
+          def clusterExists = sh returnStdout: true, script: """
+          kind get clusters | grep ${clusterName} | wc -l
+          """
+          if (clusterExists.trim() == "0") {
+            createKubernetesCluster([nodes: 3, name: clusterName])
+          }
+        }
+      }
+    }
+    stage('Load image in kind nodes') {
+      steps {
+        loadToKind()
+      }
+    }
+    stage('Install Voltha')  {
+      steps {
+        timeout(20) {
+          script {
+            imageFlags = getVolthaImageFlags(gerritProject)
+            // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
+            def localCharts = false
+            if (volthaHelmChartsChange != "" || gerritProject == "voltha-helm-charts") {
+              localCharts = true
+            }
+            def flags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml ${imageFlags} "
+            // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
+            flags = flags + "--set onos-classic.onosSshPort=30115 " +
+            "--set onos-classic.onosApiPort=30120 " +
+            "--set onos-classic.onosOfPort=31653 " +
+            "--set onos-classic.individualOpenFlowNodePorts=true " + extraHelmFlags
+            volthaDeploy([
+              workflow: workFlow.toLowerCase(),
+              extraHelmFlags: flags,
+              localCharts: localCharts,
+              kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
+              onosReplica: 3,
+              atomixReplica: 3,
+              kafkaReplica: 3,
+              etcdReplica: 3,
+              ])
+          }
+          // start logging
+          sh """
+          rm -rf $WORKSPACE/${workFlow}/
+          mkdir -p $WORKSPACE/${workFlow}
+          _TAG=kail-${workFlow} kail -n infra -n voltha > $WORKSPACE/${workFlow}/onos-voltha-combined.log &
+          """
+          sh returnStdout: false, script: '''
+          # start logging with kail
+
+          mkdir -p $LOG_FOLDER
+
+          list=($APPS_TO_LOG)
+          for app in "${list[@]}"
+          do
+            echo "Starting logs for: ${app}"
+            _TAG=kail-$app kail -l app=$app --since 1h > $LOG_FOLDER/$app.log&
+          done
+          '''
+          sh """
+          JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
+          JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd 2379:2379; done"&
+          JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
+          ps aux | grep port-forward
+          """
+          getPodsInfo("$WORKSPACE")
+        }
+      }
+    }
+    stage('Deploy Kafka Dump Chart') {
+      steps {
+        script {
+          sh returnStdout: false, script: """
+              helm repo add cord https://charts.opencord.org
+              helm repo update
+              if helm version -c --short|grep v2 -q; then
+                helm install -n voltha-kafka-dump cord/voltha-kafka-dump
+              else
+                helm install voltha-kafka-dump cord/voltha-kafka-dump
+              fi
+          """
+        }
+      }
+    }
+    stage('Push Tech-Profile') {
+      when {
+        expression { params.profile != "Default" }
+      }
+      steps {
+        sh returnStdout: false, script: """
+        etcd_container=\$(kubectl get pods -n voltha | grep voltha-etcd-cluster | awk 'NR==1{print \$1}')
+        kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json voltha/\$etcd_container:/tmp/flexpod.json
+        kubectl exec -it \$etcd_container -n voltha -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/XGS-PON/64'
+        """
+      }
+    }
+
+    stage('Push Sadis-config') {
+      steps {
+        sh returnStdout: false, script: """
+        ssh-keygen -R [${deployment_config.nodes[0].ip}]:30115
+        ssh-keyscan -p 30115 -H ${deployment_config.nodes[0].ip} >> ~/.ssh/known_hosts
+        sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay"
+        sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa"
+        sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt"
+        #TRACE in the pipeliner is too chatty, moving to DEBUG
+        sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.opencord.olt.driver"
+        sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager"
+        sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager"
+
+        if [[ "${workFlow.toUpperCase()}" == "DT" ]]; then
+          curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json
+        elif [[ "${workFlow.toUpperCase()}" == "TT" ]]; then
+          curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json
+        else
+          # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file
+          curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
+        fi
+        """
+      }
+    }
+    stage('Reinstall OLT software') {
+      when {
+        expression { params.reinstallOlt }
+      }
+      steps {
+        script {
+          deployment_config.olts.each { olt ->
+            sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'"
+            waitUntil {
+              olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
+              return olt_sw_present.toInteger() == 0
+            }
+            if ( params.branch == 'voltha-2.3' ) {
+              oltDebVersion = oltDebVersionVoltha23
+            } else {
+              oltDebVersion = oltDebVersionMaster
+            }
+            sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --install ${oltDebVersion}'"
+            waitUntil {
+              olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
+              return olt_sw_present.toInteger() == 1
+            }
+            if ( olt.fortygig ) {
+              // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
+              sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'echo port ce128 sp=40000 >> /broadcom/qax.soc ; /opt/bcm68620/svk_init.sh'"
+            }
+          }
+        }
+      }
+    }
+
+    stage('Restart OLT processes') {
+      steps {
+        script {
+          deployment_config.olts.each { olt ->
+            sh returnStdout: false, script: """
+            ssh-keyscan -H ${olt.ip} >> ~/.ssh/known_hosts
+            sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; reboot'
+            sleep 120
+            """
+            waitUntil {
+              onu_discovered = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'grep \"onu discover indication\" /var/log/openolt.log | wc -l'"
+              return onu_discovered.toInteger() > 0
+            }
+          }
+        }
+      }
+    }
+    stage('Run E2E Tests') {
+      steps {
+        script {
+          // different workflows need different make targets and different robot files
+          if ( params.workflow.toUpperCase() == "DT" ) {
+            robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+            robotFile = "Voltha_DT_PODTests.robot"
+            makeTarget = "voltha-dt-test"
+            robotFunctionalKeyword = "-i functionalDt"
+            robotDataplaneKeyword = "-i dataplaneDt"
+          }
+          else if ( params.workflow.toUpperCase() == "TT" ) {
+            // TODO the TT tests have diffent tags, address once/if TT is support on the Tucson POD
+            robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+            robotFile = "Voltha_TT_PODTests.robot"
+            makeTarget = "voltha-tt-test"
+            robotFunctionalKeyword = "-i functionalTt"
+            robotDataplaneKeyword = "-i dataplaneTt"
+          }
+          else {
+            robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+            robotFile = "Voltha_PODTests.robot"
+            makeTarget = "voltha-test"
+            robotFunctionalKeyword = "-i functional"
+            robotDataplaneKeyword = "-i dataplane"
+          }
+        }
+        sh returnStdout: false, script: """
+        mkdir -p $WORKSPACE/RobotLogs
+
+        export ROBOT_CONFIG_FILE="$WORKSPACE/${robotConfigFile}"
+        export ROBOT_MISC_ARGS="${params.extraRobotArgs} --removekeywords wuks -d $WORKSPACE/RobotLogs -v container_log_dir:$WORKSPACE "
+        export ROBOT_FILE="${robotFile}"
+
+        # If the Gerrit comment contains a line with "functional tests" then run the full
+        # functional test suite.  This covers tests tagged either 'sanity' or 'functional'.
+        # Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line
+        REGEX="functional tests"
+        if [[ "${gerritComment}" =~ \$REGEX ]]; then
+          ROBOT_MISC_ARGS+="${robotFunctionalKeyword} "
+        fi
+        # Likewise for dataplane tests
+        REGEX="dataplane tests"
+        if [[ "${gerritComment}" =~ \$REGEX ]]; then
+          ROBOT_MISC_ARGS+="${robotDataplaneKeyword}"
+        fi
+
+        ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+        make -C $WORKSPACE/voltha-system-tests ${makeTarget} || true
+        """
+      }
+    }
+  }
+  post {
+    always {
+      // stop logging
+      sh """
+        P_IDS="\$(ps e -ww -A | grep "_TAG=kail-${workFlow}" | grep -v grep | awk '{print \$1}')"
+        if [ -n "\$P_IDS" ]; then
+          echo \$P_IDS
+          for P_ID in \$P_IDS; do
+            kill -9 \$P_ID
+          done
+        fi
+        gzip $WORKSPACE/${workFlow}/onos-voltha-combined.log || true
+      """
+      sh '''
+      # stop the kail processes
+      list=($APPS_TO_LOG)
+      for app in "${list[@]}"
+      do
+        echo "Stopping logs for: ${app}"
+        _TAG="kail-$app"
+        P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+        if [ -n "$P_IDS" ]; then
+          echo $P_IDS
+          for P_ID in $P_IDS; do
+            kill -9 $P_ID
+          done
+        fi
+      done
+      '''
+      step([$class: 'RobotPublisher',
+        disableArchiveOutput: false,
+        logFileName: 'RobotLogs/log*.html',
+        otherFiles: '',
+        outputFileName: 'RobotLogs/output*.xml',
+        outputPath: '.',
+        passThreshold: 100,
+        reportFileName: 'RobotLogs/report*.html',
+        unstableThreshold: 0,
+        onlyCritical: true]);
+      archiveArtifacts artifacts: '**/*.txt,**/*.gz,*.gz,**/*.log'
+    }
+  }
+}
+
+// refs/changes/06/24206/5