[VOL-5010] - Clone unit tests onto a v2.12 branch
[VOL-5005] - Create a v2.12 release branch for test jobs.
[VOL-5004] - Deprecate voltha-2.8 unit tests
makefiles/release/include.mk
makefiles/release/help.mk
makefiles/release/voltha-versions.mk
makefiles/release/targets.mk
makefiles/release/targets/voltha-certification.mk
makefiles/release/targets/voltha-e2e.mk
makefiles/release/targets/voltha-nightly-jobs.mk
-------------------------------------------------
o Define make targets to create versioned subdirectories.
o 'branched' unit test files will live in subdirs.
o Refactoring still in progress, v2.8 tests are disabled/retired in the interim.
jjb/voltha-e2e.yaml
jjb/pipeline/voltha/voltha-2.12/
jjb/voltha-test/voltha-nightly-jobs/voltha-2.12.yaml
----------------------------------------------------
o Create versioned subdirectories to support v2.12 unit testing.
jjb/voltha-e2e.yaml
jjb/voltha-e2e/voltha-master.yaml
jjb/voltha-e2e/voltha-2.12.yaml
jjb/voltha-e2e/voltha-2.8.yaml
--------------------------------
o Guineapig: periodic-voltha-pm-data-test-bbsim
o Refactor unit test from voltha-e2e.yaml.
o Create new v2.12 pipeline job.
o Disable pre-lts legacy pipeline job 2.8
o Refactoring one test so job state in all branches can be checked.
o Tomorrow verify the v2.8 job did not launch
Change-Id: Ib550fae395e1a416466c2f5fb9640be8405dc39e
diff --git a/jjb/pipeline/voltha/voltha-2.12/voltha-scale-test.groovy b/jjb/pipeline/voltha/voltha-2.12/voltha-scale-test.groovy
new file mode 100644
index 0000000..88d6070
--- /dev/null
+++ b/jjb/pipeline/voltha/voltha-2.12/voltha-scale-test.groovy
@@ -0,0 +1,933 @@
+// Copyright 2019-2023 Open Networking Foundation (ONF) and the ONF Contributors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// deploy VOLTHA and performs a scale test
+
+library identifier: 'cord-jenkins-libraries@master',
+ retriever: modernSCM([
+ $class: 'GitSCMSource',
+ remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+// this function generates the correct parameters for ofAgent
+// to connect to multiple ONOS instances
+def ofAgentConnections(numOfOnos, releaseName, namespace) {
+ def params = " "
+ numOfOnos.times {
+ params += "--set voltha.services.controller[${it}].address=${releaseName}-onos-classic-${it}.${releaseName}-onos-classic-hs.${namespace}.svc:6653 "
+ }
+ return params
+}
+
+pipeline {
+
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: 60, unit: 'MINUTES')
+ }
+ environment {
+ JENKINS_NODE_COOKIE="dontKillMe" // do not kill processes after the build is done
+ KUBECONFIG="$HOME/.kube/config"
+ VOLTCONFIG="$HOME/.volt/config"
+ SSHPASS="karaf"
+ VOLTHA_LOG_LEVEL="${logLevel}"
+ NUM_OF_BBSIM="${olts}"
+ NUM_OF_OPENONU="${openonuAdapterReplicas}"
+ NUM_OF_ONOS="${onosReplicas}"
+ NUM_OF_ATOMIX="${atomixReplicas}"
+ EXTRA_HELM_FLAGS=" "
+ LOG_FOLDER="$WORKSPACE/logs"
+ GERRIT_PROJECT="${GERRIT_PROJECT}"
+ PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+ }
+
+ stages {
+ stage ('Cleanup') {
+ steps {
+ script {
+ try {
+ timeout(time: 5, unit: 'MINUTES') {
+ sh returnStdout: false, script: '''
+ cd $WORKSPACE
+ rm -rf $WORKSPACE/*
+ '''
+ // removing the voltha-infra chart first
+ // if we don't ONOS might get stuck because of all the events when BBSim goes down
+ sh returnStdout: false, script: '''
+ set +x
+ helm del voltha-infra || true
+ echo -ne "\nWaiting for ONOS to be removed..."
+ onos=$(kubectl get pod -n default -l app=onos-classic --no-headers | wc -l)
+ while [[ $onos != 0 ]]; do
+ onos=$(kubectl get pod -n default -l app=onos-classic --no-headers | wc -l)
+ sleep 5
+ echo -ne "."
+ done
+ '''
+ }
+ } catch(org.jenkinsci.plugins.workflow.steps.FlowInterruptedException e) {
+ // if we have a timeout in the Cleanup fase most likely ONOS got stuck somewhere, thuse force remove the pods
+ sh '''
+ kubectl get pods | grep Terminating | awk '{print $1}' | xargs kubectl delete pod --force --grace-period=0
+ '''
+ }
+ timeout(time: 10, unit: 'MINUTES') {
+ script {
+ helmTeardown(["default", "voltha1", "infra"])
+ }
+ sh returnStdout: false, script: '''
+ helm repo add onf https://charts.opencord.org
+ helm repo update
+
+ # remove all persistent volume claims
+ kubectl delete pvc --all-namespaces --all
+ PVCS=\$(kubectl get pvc --all-namespaces --no-headers | wc -l)
+ while [[ \$PVCS != 0 ]]; do
+ sleep 5
+ PVCS=\$(kubectl get pvc --all-namespaces --no-headers | wc -l)
+ done
+
+ # remove orphaned port-forward from different namespaces
+ ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
+ '''
+ }
+ }
+ }
+ }
+ stage('Download Code') {
+ steps {
+ getVolthaCode([
+ branch: "${release}",
+ volthaSystemTestsChange: "${volthaSystemTestsChange}",
+ volthaHelmChartsChange: "${volthaHelmChartsChange}",
+ ])
+ }
+ }
+ stage('Build patch') {
+ when {
+ expression {
+ return params.GERRIT_PROJECT
+ }
+ }
+ steps {
+ sh """
+ git clone https://\$GERRIT_HOST/\$GERRIT_PROJECT
+ cd \$GERRIT_PROJECT
+ git fetch https://\$GERRIT_HOST/\$GERRIT_PROJECT \$GERRIT_REFSPEC && git checkout FETCH_HEAD
+
+ DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-build
+ DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-push
+ """
+ }
+ }
+ stage('Deploy common infrastructure') {
+ steps {
+ sh '''
+ if [ ${withMonitoring} = true ] ; then
+ helm install nem-monitoring onf/nem-monitoring \
+ -f $HOME/voltha-scale/grafana.yaml \
+ --set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \
+ --set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false
+ fi
+ '''
+ }
+ }
+ stage('Deploy Voltha') {
+ steps {
+ timeout(time: 10, unit: 'MINUTES') {
+ installVoltctl("${release}")
+ script {
+ startComponentsLogs([
+ appsToLog: [
+ 'app.kubernetes.io/name=etcd',
+ 'app.kubernetes.io/name=kafka',
+ 'app=voltha-infra-atomix',
+ 'app=onos-classic',
+ 'app=adapter-open-onu',
+ 'app=adapter-open-olt',
+ 'app=rw-core',
+ 'app=ofagent',
+ 'app=bbsim',
+ 'app=radius',
+ 'app=bbsim-sadis-server',
+ 'app=onos-config-loader',
+ ]
+ ])
+ def returned_flags = sh (returnStdout: true, script: """
+
+ export EXTRA_HELM_FLAGS+=' '
+
+ # BBSim custom image handling
+ if [ '${bbsimImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'bbsim' ]; then
+ IFS=: read -r bbsimRepo bbsimTag <<< '${bbsimImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set images.bbsim.repository=\$bbsimRepo,images.bbsim.tag=\$bbsimTag "
+ fi
+
+ # VOLTHA custom image handling
+ if [ '${rwCoreImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-go' ]; then
+ IFS=: read -r rwCoreRepo rwCoreTag <<< '${rwCoreImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set voltha.images.rw_core.repository=\$rwCoreRepo,voltha.images.rw_core.tag=\$rwCoreTag "
+ fi
+
+ # ofAgent custom image handling
+ if [ '${ofAgentImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'of-agent' ]; then
+ IFS=: read -r ofAgentRepo ofAgentTag <<< '${ofAgentImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set voltha.images.ofagent.repository=\$ofAgentRepo,voltha.images.ofagent.tag=\$ofAgentTag "
+ fi
+
+ # OpenOLT custom image handling
+ if [ '${openoltAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openolt-adapter' ]; then
+ IFS=: read -r openoltAdapterRepo openoltAdapterTag <<< '${openoltAdapterImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set voltha-adapter-openolt.images.adapter_open_olt.repository=\$openoltAdapterRepo,voltha-adapter-openolt.images.adapter_open_olt.tag=\$openoltAdapterTag "
+ fi
+
+ # OpenONU custom image handling
+ if [ '${openonuAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter' ]; then
+ IFS=: read -r openonuAdapterRepo openonuAdapterTag <<< '${openonuAdapterImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set voltha-adapter-openonu.images.adapter_open_onu.repository=\$openonuAdapterRepo,voltha-adapter-openonu.images.adapter_open_onu.tag=\$openonuAdapterTag "
+ fi
+
+ # OpenONU GO custom image handling
+ if [ '${openonuAdapterGoImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter-go' ]; then
+ IFS=: read -r openonuAdapterGoRepo openonuAdapterGoTag <<< '${openonuAdapterGoImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set voltha-adapter-openonu.images.adapter_open_onu_go.repository=\$openonuAdapterGoRepo,voltha-adapter-openonu.images.adapter_open_onu_go.tag=\$openonuAdapterGoTag "
+ fi
+
+ # ONOS custom image handling
+ if [ '${onosImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-onos' ]; then
+ IFS=: read -r onosRepo onosTag <<< '${onosImg.trim()}'
+ EXTRA_HELM_FLAGS+="--set onos-classic.image.repository=\$onosRepo,onos-classic.image.tag=\$onosTag "
+ fi
+
+ # set BBSim parameters
+ EXTRA_HELM_FLAGS+='--set enablePerf=true,pon=${pons},onu=${onus},uni=${unis} '
+
+ # disable the securityContext, this is a development cluster
+ EXTRA_HELM_FLAGS+='--set securityContext.enabled=false '
+
+ # No persistent-volume-claims in Atomix
+ EXTRA_HELM_FLAGS+="--set onos-classic.atomix.persistence.enabled=false "
+
+ # Use custom built images
+
+ if [ '\$GERRIT_PROJECT' == 'voltha-go' ]; then
+ EXTRA_HELM_FLAGS+="--set voltha.images.rw_core.repository=${dockerRegistry}/voltha/voltha-rw-core,voltha.images.rw_core.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'voltha-openolt-adapter' ]; then
+ EXTRA_HELM_FLAGS+="--set voltha-openolt-adapter.images.adapter_open_olt.repository=${dockerRegistry}/voltha/voltha-openolt-adapter,voltha-openolt-adapter.images.adapter_open_olt.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter' ]; then
+ EXTRA_HELM_FLAGS+="--set voltha-openonu-adapter.images.adapter_open_onu.repository=${dockerRegistry}/voltha/voltha-openonu-adapter,voltha-openonu-adapter.images.adapter_open_onu.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter-go' ]; then
+ EXTRA_HELM_FLAGS+="--set voltha-openonu-adapter-go.images.adapter_open_onu_go.repository=${dockerRegistry}/voltha/voltha-openonu-adapter-go,voltha-openonu-adapter-go.images.adapter_open_onu_go.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'ofagent-go' ]; then
+ EXTRA_HELM_FLAGS+="--set voltha.images.ofagent.repository=${dockerRegistry}/voltha/voltha-ofagent-go,ofagent-go.images.ofagent.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'voltha-onos' ]; then
+ EXTRA_HELM_FLAGS+="--set onos-classic.image.repository=${dockerRegistry}/voltha/voltha-onos,onos-classic.image.tag=voltha-scale "
+ fi
+
+ if [ '\$GERRIT_PROJECT' == 'bbsim' ]; then
+ EXTRA_HELM_FLAGS+="--set images.bbsim.repository=${dockerRegistry}/voltha/bbsim,images.bbsim.tag=voltha-scale "
+ fi
+ echo \$EXTRA_HELM_FLAGS
+
+ """).trim()
+
+ def extraHelmFlags = returned_flags
+ // The added space before params.extraHelmFlags is required due to the .trim() above
+ def infraHelmFlags =
+ "--set global.log_level=${logLevel} " +
+ "--set radius.enabled=${withEapol} " +
+ "--set onos-classic.onosSshPort=30115 " +
+ "--set onos-classic.onosApiPort=30120 " +
+ extraHelmFlags + " " + params.extraHelmFlags
+
+ println "Passing the following parameters to the VOLTHA infra deploy: ${infraHelmFlags}."
+
+ def localCharts = false
+ if (volthaHelmChartsChange != "") {
+ localCharts = true
+ }
+
+ volthaInfraDeploy([
+ workflow: workflow,
+ infraNamespace: "default",
+ extraHelmFlags: infraHelmFlags,
+ localCharts: localCharts,
+ onosReplica: onosReplicas,
+ atomixReplica: atomixReplicas,
+ kafkaReplica: kafkaReplicas,
+ etcdReplica: etcdReplicas,
+ ])
+
+ stackHelmFlags = " --set onu=${onus},pon=${pons},uni=${unis} --set global.log_level=${logLevel.toLowerCase()} "
+ stackHelmFlags += " --set voltha.ingress.enabled=true --set voltha.ingress.enableVirtualHosts=true --set voltha.fullHostnameOverride=voltha.scale1.dev "
+ stackHelmFlags += extraHelmFlags + " " + params.extraHelmFlags
+
+ volthaStackDeploy([
+ bbsimReplica: olts.toInteger(),
+ infraNamespace: "default",
+ volthaNamespace: "default",
+ stackName: "voltha1", // TODO support custom charts
+ workflow: workflow,
+ extraHelmFlags: stackHelmFlags,
+ localCharts: localCharts,
+ onosReplica: onosReplicas,
+ ])
+ sh """
+ set +x
+
+ echo -ne "\nWaiting for VOLTHA and ONOS to start..."
+ voltha=\$(kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l)
+ onos=\$(kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l)
+ while [[ \$voltha != 0 || \$onos != 0 ]]; do
+ sleep 5
+ echo -ne "."
+ voltha=\$(kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l)
+ onos=\$(kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l)
+ done
+ echo -ne "\nVOLTHA and ONOS pods ready\n"
+ kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l
+ kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l
+ """
+ start_port_forward(olts)
+ }
+ }
+ }
+ }
+ stage('Configuration') {
+ steps {
+ script {
+ setOnosLogLevels([
+ onosNamespace: "default",
+ apps: [
+ 'org.opencord.dhcpl2relay',
+ 'org.opencord.olt',
+ 'org.opencord.aaa',
+ 'org.opencord.maclearner',
+ 'org.onosproject.net.flowobjective.impl.FlowObjectiveManager',
+ 'org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager'
+ ],
+ logLevel: logLevel
+ ])
+ def tech_prof_directory = "XGS-PON"
+ sh returnStdout: false, script: """
+ #Setting link discovery
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled ${withLLDP}
+
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager allowExtraneousRules true
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager importExtraneousRules true
+
+
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxBatchMillis 900
+
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxIdleMillis 500
+
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.opencord.olt.impl.Olt provisionDelay 1000
+
+ # BBSim logs at debug level don't slow down the system much and are very helpful while troubleshooting
+ BBSIM_IDS=\$(kubectl get pods | grep bbsim | grep -v server | awk '{print \$1}')
+ IDS=(\$BBSIM_IDS)
+
+ for bbsim in "\${IDS[@]}"
+ do
+ kubectl exec -t \$bbsim -- bbsimctl log debug false
+ done
+
+ # Set Flows/Ports/Meters/Groups poll frequency
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.of.flow.impl.OpenFlowRuleProvider flowPollFrequency ${onosStatInterval}
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.of.device.impl.OpenFlowDeviceProvider portStatsPollFrequency ${onosStatInterval}
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.of.group.impl.OpenFlowGroupProvider groupPollInterval ${onosGroupInterval}
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.FlowObjectiveManager numThreads ${flowObjWorkerThreads}
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager objectiveTimeoutMs 300000
+
+ if [ ${withFlows} = false ]; then
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 app deactivate org.opencord.olt
+ fi
+
+ if [ '${workflow}' = 'tt' ]; then
+ etcd_container=\$(kubectl get pods --all-namespaces | grep etcd-0 | awk 'NR==1{print \$2}')
+ kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json
+ put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64')
+ kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json
+ put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65')
+ kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast.json
+ put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66')
+ fi
+
+ if [ ${withPcap} = true ] ; then
+ # Start the tcp-dump in ofagent
+ export OF_AGENT=\$(kubectl get pods -l app=ofagent -o name)
+ kubectl exec \$OF_AGENT -- apk update
+ kubectl exec \$OF_AGENT -- apk add tcpdump
+ _TAG=ofagent-tcpdump kubectl exec \$OF_AGENT -- tcpdump -nei eth0 -w out.pcap&
+
+ # Start the tcp-dump in radius
+ export RADIUS=\$(kubectl get pods -l app=radius -o name)
+ kubectl exec \$RADIUS -- apt-get update
+ kubectl exec \$RADIUS -- apt-get install -y tcpdump
+ _TAG=radius-tcpdump kubectl exec \$RADIUS -- tcpdump -w out.pcap&
+
+ # Start the tcp-dump in ONOS
+ for i in \$(seq 0 \$ONOSES); do
+ INSTANCE="onos-onos-classic-\$i"
+ kubectl exec \$INSTANCE -- apt-get update
+ kubectl exec \$INSTANCE -- apt-get install -y tcpdump
+ kubectl exec \$INSTANCE -- mv /usr/sbin/tcpdump /usr/bin/tcpdump
+ _TAG=\$INSTANCE kubectl exec \$INSTANCE -- /usr/bin/tcpdump -nei eth0 port 1812 -w out.pcap&
+ done
+ fi
+ """
+ }
+ }
+ }
+ stage('Load MIB Template') {
+ when {
+ expression {
+ return params.withMibTemplate
+ }
+ }
+ steps {
+ sh """
+ # load MIB template
+ wget ${mibTemplateUrl} -O mibTemplate.json
+ cat mibTemplate.json | kubectl exec -it \$(kubectl get pods |grep etcd-0 | awk 'NR==1{print \$1}') -- etcdctl put service/voltha/omci_mibs/go_templates/BBSM/v0.0.1/BBSM_IMG_00001
+ """
+ }
+ }
+ stage('Run Test') {
+ steps {
+ sh '''
+ mkdir -p $WORKSPACE/RobotLogs
+ cd $WORKSPACE/voltha-system-tests
+ make vst_venv
+ '''
+ sh '''
+ if [ ${withProfiling} = true ] ; then
+ mkdir -p $LOG_FOLDER/pprof
+ echo $PATH
+ #Creating Python script for ONU Detection
+ cat << EOF > $WORKSPACE/pprof.sh
+timestamp() {
+ date +"%T"
+}
+
+i=0
+while [[ true ]]; do
+ ((i++))
+ ts=$(timestamp)
+ go tool pprof -png http://127.0.0.1:6060/debug/pprof/heap > $LOG_FOLDER/pprof/rw-core-heap-\\$i-\\$ts.png
+ go tool pprof -png http://127.0.0.1:6060/debug/pprof/goroutine > $LOG_FOLDER/pprof/rw-core-goroutine-\\$i-\\$ts.png
+ curl -o $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof http://127.0.0.1:6060/debug/pprof/profile?seconds=10
+ go tool pprof -png $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.png
+
+ go tool pprof -png http://127.0.0.1:6061/debug/pprof/heap > $LOG_FOLDER/pprof/openolt-heap-\\$i-\\$ts.png
+ go tool pprof -png http://127.0.0.1:6061/debug/pprof/goroutine > $LOG_FOLDER/pprof/openolt-goroutine-\\$i-\\$ts.png
+ curl -o $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof http://127.0.0.1:6061/debug/pprof/profile?seconds=10
+ go tool pprof -png $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.png
+
+ go tool pprof -png http://127.0.0.1:6062/debug/pprof/heap > $LOG_FOLDER/pprof/ofagent-heap-\\$i-\\$ts.png
+ go tool pprof -png http://127.0.0.1:6062/debug/pprof/goroutine > $LOG_FOLDER/pprof/ofagent-goroutine-\\$i-\\$ts.png
+ curl -o $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof http://127.0.0.1:6062/debug/pprof/profile?seconds=10
+ go tool pprof -png $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.png
+
+ sleep 10
+done
+EOF
+
+ _TAG="pprof"
+ _TAG=$_TAG bash $WORKSPACE/pprof.sh &
+ fi
+ '''
+ timeout(time: "${testTimeout.toInteger() + 5}", unit: 'MINUTES') {
+ sh '''
+ ROBOT_PARAMS="--exitonfailure \
+ -v olt:${olts} \
+ -v pon:${pons} \
+ -v onu:${onus} \
+ -v ONOS_SSH_PORT:30115 \
+ -v ONOS_REST_PORT:30120 \
+ -v workflow:${workflow} \
+ -v withEapol:${withEapol} \
+ -v withDhcp:${withDhcp} \
+ -v withIgmp:${withIgmp} \
+ -v timeout:${testTimeout}m \
+ -v withMaclearning:${withMaclearning} \
+ --noncritical non-critical \
+ -e onu-upgrade -e igmp -e teardown "
+
+ if [ ${withEapol} = false ] ; then
+ ROBOT_PARAMS+="-e authentication "
+ fi
+
+ if [ ${withDhcp} = false ] ; then
+ ROBOT_PARAMS+="-e dhcp "
+ fi
+
+ if [ ${provisionSubscribers} = false ] ; then
+ # if we're not considering subscribers then we don't care about authentication and dhcp
+ ROBOT_PARAMS+="-e authentication -e provision -e flow-after -e dhcp "
+ fi
+
+ if [ ${withFlows} = false ] ; then
+ ROBOT_PARAMS+="-i setup -i activation "
+ fi
+
+ if [ ${withOnuUpgrade} = true ] ; then
+ ROBOT_PARAMS+="-e flow-before "
+ fi
+
+ cd $WORKSPACE/voltha-system-tests
+ source ./vst_venv/bin/activate
+ robot -d $WORKSPACE/RobotLogs \
+ $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
+
+ python tests/scale/collect-result.py -r $WORKSPACE/RobotLogs/output.xml -p $WORKSPACE/plots > $WORKSPACE/execution-time.txt || true
+ cat $WORKSPACE/execution-time.txt
+ '''
+ }
+ }
+ }
+ stage('Run ONU Upgrade Tests') {
+ environment {
+ ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/OnuUpgradeTests"
+ }
+ when {
+ expression {
+ return params.withOnuUpgrade
+ }
+ }
+ options {
+ timeout(time: "${testTimeout.toInteger() + 1}", unit: 'MINUTES')
+ }
+ steps {
+ sh '''
+ set +e
+ mkdir -p $ROBOT_LOGS_DIR
+ cd $WORKSPACE/voltha-system-tests
+ make vst_venv
+ '''
+ script {
+ Exception caughtException = null
+
+ catchError(buildResult: 'SUCCESS', stageResult: 'ABORTED') {
+ try {
+ sh '''
+ ROBOT_PARAMS="--exitonfailure \
+ -v olt:${olts} \
+ -v pon:${pons} \
+ -v onu:${onus} \
+ -v workflow:${workflow} \
+ -v withEapol:${withEapol} \
+ -v withDhcp:${withDhcp} \
+ -v withIgmp:${withIgmp} \
+ -v timeout:${testTimeout}m \
+ -v withMaclearning:${withMaclearning}
+ -v image_version:BBSM_IMG_00002 \
+ -v image_url:http://bbsim0:50074/images/software-image.img \
+ -v image_vendor:BBSM \
+ -v image_activate_on_success:false \
+ -v image_commit_on_success:false \
+ -v image_crc:0 \
+ -v ONOS_SSH_PORT:30115 \
+ -v ONOS_REST_PORT:30120 \
+ --noncritical non-critical \
+ -i onu-upgrade \
+ -e setup -e activation -e flow-before \
+ -e authentication -e provision -e flow-after \
+ -e dhcp -e igmp -e teardown "
+ cd $WORKSPACE/voltha-system-tests
+ source ./vst_venv/bin/activate
+ robot -d $ROBOT_LOGS_DIR \
+ $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
+ '''
+ } catch (org.jenkinsci.plugins.workflow.steps.FlowInterruptedException e) {
+ // if the error is a timeout don't mark the build as failed
+ println "ONU Upgrade test timed out"
+ } catch (Throwable e) {
+ caughtException = e
+ }
+ }
+
+ if (caughtException) {
+ error caughtException.message
+ }
+ }
+ }
+ }
+ stage('Run Igmp Tests') {
+ environment {
+ ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/IgmpTests"
+ }
+ when {
+ expression {
+ return params.withIgmp
+ }
+ }
+ options {
+ timeout(time: "${testTimeout.toInteger() + 1}", unit: 'MINUTES')
+ }
+ steps {
+ sh returnStdout: false, script: """
+ # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set DEBUG org.onosproject.store.group.impl
+ """
+ sh '''
+ set +e
+ mkdir -p $ROBOT_LOGS_DIR
+ cd $WORKSPACE/voltha-system-tests
+ make vst_venv
+ '''
+ script {
+ Exception caughtException = null
+
+ catchError(buildResult: 'SUCCESS', stageResult: 'ABORTED') {
+ try {
+ sh '''
+ ROBOT_PARAMS="--exitonfailure \
+ -v olt:${olts} \
+ -v pon:${pons} \
+ -v onu:${onus} \
+ -v workflow:${workflow} \
+ -v withEapol:${withEapol} \
+ -v withDhcp:${withDhcp} \
+ -v withIgmp:${withIgmp} \
+ -v timeout:${testTimeout}m \
+ -v withMaclearning:${withMaclearning}
+ -v ONOS_SSH_PORT:30115 \
+ -v ONOS_REST_PORT:30120 \
+ --noncritical non-critical \
+ -i igmp \
+ -e setup -e activation -e flow-before \
+ -e authentication -e provision -e flow-after \
+ -e dhcp -e onu-upgrade -e teardown "
+ cd $WORKSPACE/voltha-system-tests
+ source ./vst_venv/bin/activate
+ robot -d $ROBOT_LOGS_DIR \
+ $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
+ '''
+ } catch (org.jenkinsci.plugins.workflow.steps.FlowInterruptedException e) {
+ // if the error is a timeout don't mark the build as failed
+ println "IGMP test timed out"
+ } catch (Throwable e) {
+ caughtException = e
+ }
+ }
+
+ if (caughtException) {
+ error caughtException.message
+ }
+ }
+ }
+ }
+ stage("Device removal") {
+ options {
+ timeout(time: "${testTimeout.toInteger() + 5}", unit: 'MINUTES')
+ }
+ steps {
+ sh '''
+ set +e
+ mkdir -p $ROBOT_LOGS_DIR
+ cd $WORKSPACE/voltha-system-tests
+ make vst_venv
+ '''
+ script {
+ Exception caughtException = null
+
+ catchError(buildResult: 'SUCCESS', stageResult: 'ABORTED') {
+ try {
+ sh '''
+ ROBOT_PARAMS="--exitonfailure \
+ -v olt:${olts} \
+ -v pon:${pons} \
+ -v onu:${onus} \
+ -v ONOS_SSH_PORT:30115 \
+ -v ONOS_REST_PORT:30120 \
+ -v workflow:${workflow} \
+ -v withEapol:${withEapol} \
+ -v withDhcp:${withDhcp} \
+ -v withIgmp:${withIgmp} \
+ -v timeout:${testTimeout}m \
+ -v withMaclearning:${withMaclearning} \
+ --noncritical non-critical \
+ -i teardown"
+
+ cd $WORKSPACE/voltha-system-tests
+ source ./vst_venv/bin/activate
+ robot -d $WORKSPACE/RobotLogs \
+ $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
+ '''
+ } catch (org.jenkinsci.plugins.workflow.steps.FlowInterruptedException e) {
+ // if the error is a timeout don't mark the build as failed
+ println "Cleanup test timed out"
+ } catch (Throwable e) {
+ caughtException = e
+ }
+ }
+ }
+ }
+ }
+ }
+ post {
+ always {
+ stopComponentsLogs()
+ // collect result, done in the "post" step so it's executed even in the
+ // event of a timeout in the tests
+ sh '''
+ if [ ${withPcap} = true ] ; then
+ # stop ofAgent tcpdump
+ P_ID="\$(ps e -ww -A | grep "_TAG=ofagent-tcpdump" | grep -v grep | awk '{print \$1}')"
+ if [ -n "\$P_ID" ]; then
+ kill -9 \$P_ID
+ fi
+
+ # stop radius tcpdump
+ P_ID="\$(ps e -ww -A | grep "_TAG=radius-tcpdump" | grep -v grep | awk '{print \$1}')"
+ if [ -n "\$P_ID" ]; then
+ kill -9 \$P_ID
+ fi
+
+ # stop onos tcpdump
+ LIMIT=$(($NUM_OF_ONOS - 1))
+ for i in $(seq 0 $LIMIT); do
+ INSTANCE="onos-onos-classic-$i"
+ P_ID="\$(ps e -ww -A | grep "_TAG=$INSTANCE" | grep -v grep | awk '{print \$1}')"
+ if [ -n "\$P_ID" ]; then
+ kill -9 \$P_ID
+ fi
+ done
+
+ # copy the file
+ export OF_AGENT=$(kubectl get pods -l app=ofagent | awk 'NR==2{print $1}') || true
+ kubectl cp $OF_AGENT:out.pcap $LOG_FOLDER/ofagent.pcap || true
+
+ export RADIUS=$(kubectl get pods -l app=radius | awk 'NR==2{print $1}') || true
+ kubectl cp $RADIUS:out.pcap $LOG_FOLDER/radius.pcap || true
+
+ LIMIT=$(($NUM_OF_ONOS - 1))
+ for i in $(seq 0 $LIMIT); do
+ INSTANCE="onos-onos-classic-$i"
+ kubectl cp $INSTANCE:out.pcap $LOG_FOLDER/$INSTANCE.pcap || true
+ done
+ fi
+ '''
+ sh '''
+ if [ ${withProfiling} = true ] ; then
+ _TAG="pprof"
+ P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+ if [ -n "$P_IDS" ]; then
+ echo $P_IDS
+ for P_ID in $P_IDS; do
+ kill -9 $P_ID
+ done
+ fi
+ fi
+ '''
+ plot([
+ csvFileName: 'scale-test.csv',
+ csvSeries: [
+ [file: 'plots/plot-voltha-onus.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-ports.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-openolt-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-auth.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-voltha-openolt-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ [file: 'plots/plot-onos-dhcp.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+ ],
+ group: 'Voltha-Scale-Numbers', numBuilds: '20', style: 'line', title: "Scale Test (OLTs: ${olts}, PONs: ${pons}, ONUs: ${onus}, UNIs: ${unis})", yaxis: 'Time (s)', useDescr: true
+ ])
+ script {
+ try {
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: '**/log*.html',
+ otherFiles: '',
+ outputFileName: '**/output*.xml',
+ outputPath: 'RobotLogs',
+ passThreshold: 100,
+ reportFileName: '**/report*.html',
+ onlyCritical: true,
+ unstableThreshold: 0]);
+ } catch (Exception e) {
+ println "Cannot archive Robot Logs: ${e.toString()}"
+ }
+ }
+
+ getPodsInfo("$LOG_FOLDER")
+ // get all the logs from kubernetes PODs
+ sh returnStdout: false, script: '''
+ # copy the ONOS logs directly from the container to avoid the color codes
+ printf '%s\n' $(kubectl get pods -l app=onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs --no-run-if-empty -I# bash -c "kubectl cp #:${karafHome}/data/log/karaf.log $LOG_FOLDER/#.log" || true
+
+ # get ONOS cfg from the 3 nodes
+ # kubectl exec -t voltha-infra-onos-classic-0 -- sh /root/onos/${karafHome}/bin/client cfg get > ~/voltha-infra-onos-classic-0-cfg.txt || true
+ # kubectl exec -t voltha-infra-onos-classic-1 -- sh /root/onos/${karafHome}/bin/client cfg get > ~/voltha-infra-onos-classic-1-cfg.txt || true
+ # kubectl exec -t voltha-infra-onos-classic-2 -- sh /root/onos/${karafHome}/bin/client cfg get > ~/voltha-infra-onos-classic-2-cfg.txt || true
+
+ # kubectl exec -t voltha-infra-onos-classic-0 -- sh /root/onos/${karafHome}/bin/client obj-next-ids > ~/voltha-infra-onos-classic-0-next-objs.txt || true
+ # kubectl exec -t voltha-infra-onos-classic-1 -- sh /root/onos/${karafHome}/bin/client obj-next-ids > ~/voltha-infra-onos-classic-1-next-objs.txt || true
+ # kubectl exec -t voltha-infra-onos-classic-2 -- sh /root/onos/${karafHome}/bin/client obj-next-ids > ~/voltha-infra-onos-classic-2-next-objs.txt || true
+
+ # get radius logs out of the container
+ kubectl cp $(kubectl get pods -l app=radius --no-headers | awk '{print $1}'):/var/log/freeradius/radius.log $LOG_FOLDER/radius.log || true
+ '''
+ // dump all the BBSim(s) ONU information
+ sh '''
+ BBSIM_IDS=$(kubectl get pods | grep bbsim | grep -v server | awk '{print $1}')
+ IDS=($BBSIM_IDS)
+
+ for bbsim in "${IDS[@]}"
+ do
+ kubectl exec -t $bbsim -- bbsimctl onu list > $LOG_FOLDER/$bbsim-device-list.txt || true
+ kubectl exec -t $bbsim -- bbsimctl uni list > $LOG_FOLDER/$bbsim-uni-list.txt || true
+ kubectl exec -t $bbsim -- bbsimctl service list > $LOG_FOLDER/$bbsim-service-list.txt || true
+ kubectl exec -t $bbsim -- bbsimctl olt resources GEM_PORT > $LOG_FOLDER/$bbsim-flows-gem-ports.txt || true
+ kubectl exec -t $bbsim -- bbsimctl olt resources ALLOC_ID > $LOG_FOLDER/$bbsim-flows-alloc-ids.txt || true
+ kubectl exec -t $bbsim -- bbsimctl olt pons > $LOG_FOLDER/$bbsim-pon-resources.txt || true
+ done
+ '''
+ script {
+ // first make sure the port-forward is still running,
+ // sometimes Jenkins kills it regardless of the JENKINS_NODE_COOKIE=dontKillMe
+ def running = sh (
+ script: 'ps aux | grep port-forw | grep -E "onos|voltha" | grep -v grep | wc -l',
+ returnStdout: true
+ ).trim()
+ // if any of the voltha-api, onos-rest, onos-ssh port-forwards are not there
+ // kill all and restart
+ if (running != "3") {
+ start_port_forward(olts)
+ }
+ }
+ // get ONOS debug infos
+ sh '''
+
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 apps -a -s > $LOG_FOLDER/onos-apps.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 nodes > $LOG_FOLDER/onos-nodes.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 masters > $LOG_FOLDER/onos-masters.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 roles > $LOG_FOLDER/onos-roles.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg get > $LOG_FOLDER/onos-cfg.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 netcfg > $LOG_FOLDER/onos-netcfg.txt
+
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 ports > $LOG_FOLDER/onos-ports-list.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 hosts > $LOG_FOLDER/onos-hosts-list.txt
+
+ if [ ${withFlows} = true ] ; then
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-olts > $LOG_FOLDER/onos-olt-list.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 flows -s > $LOG_FOLDER/onos-flows-list.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 meters > $LOG_FOLDER/onos-meters-list.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-port-status > $LOG_FOLDER/onos-volt-port-status.txt
+ fi
+
+ if [ ${provisionSubscribers} = true ]; then
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-programmed-subscribers > $LOG_FOLDER/onos-programmed-subscribers.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-programmed-meters > $LOG_FOLDER/onos-programmed-meters.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-bpmeter-mappings > $LOG_FOLDER/onos-bpmeter-mappings.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-failed-subscribers > $LOG_FOLDER/onos-failed-subscribers.txt
+ fi
+
+ if [ ${withEapol} = true ] ; then
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 aaa-users > $LOG_FOLDER/onos-aaa-users.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 aaa-statistics > $LOG_FOLDER/onos-aaa-statistics.txt
+ fi
+
+ if [ ${withDhcp} = true ] ; then
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 dhcpl2relay-allocations > $LOG_FOLDER/onos-dhcp-allocations.txt
+ fi
+
+ if [ ${withIgmp} = true ] ; then
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 mcast-host-routes > $LOG_FOLDER/onos-mcast-host-routes.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 mcast-host-show > $LOG_FOLDER/onos-mcast-host-show.txt
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 groups > $LOG_FOLDER/onos-groups.txt
+ fi
+
+ if [ ${withMaclearning} = true ] ; then
+ sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 mac-learner-get-mapping > $LOG_FOLDER/onos-maclearning-host-mappings.txt
+ fi
+ '''
+ // collect etcd metrics
+ sh '''
+ mkdir -p $WORKSPACE/etcd-metrics
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_keys_total' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-key-count.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=grpc_server_handled_total{grpc_service="etcdserverpb.KV"}' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-rpc-count.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_db_total_size_in_bytes' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-db-size.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time-sum.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_bucket' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-backend-write-time-bucket.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_wal_fsync_duration_seconds_bucket' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-wal-fsync-time-bucket.json || true
+ curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_network_peer_round_trip_time_seconds_bucket' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-network-peer-round-trip-time-seconds.json || true
+ etcd_namespace=\$(kubectl get pods --all-namespaces | grep etcd-0 | awk 'NR==1{print \$1}')
+ etcd_container=\$(kubectl get pods --all-namespaces | grep etcd-0 | awk 'NR==1{print \$2}')
+ kubectl exec -it -n \$etcd_namespace \$etcd_container -- etcdctl defrag --cluster || true
+ kubectl exec -it -n \$etcd_namespace \$etcd_container -- etcdctl endpoint status -w table > $WORKSPACE/etcd-metrics/etcd-status-table.txt || true
+
+ '''
+ // get VOLTHA debug infos
+ script {
+ try {
+ sh '''
+ voltctl -m 32MB device list -o json > $LOG_FOLDER/device-list.json || true
+ python -m json.tool $LOG_FOLDER/device-list.json > $LOG_FOLDER/voltha-devices-list.json || true
+ rm $LOG_FOLDER/device-list.json || true
+ voltctl -m 32MB device list > $LOG_FOLDER/voltha-devices-list.txt || true
+
+ printf '%s\n' $(voltctl -m 32MB device list | grep olt | awk '{print $1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 32MB device flows # > $LOG_FOLDER/voltha-device-flows-#.txt" || true
+ printf '%s\n' $(voltctl -m 32MB device list | grep olt | awk '{print $1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 32MB device port list --format 'table{{.PortNo}}\t{{.Label}}\t{{.Type}}\t{{.AdminState}}\t{{.OperStatus}}' # > $LOG_FOLDER/voltha-device-ports-#.txt" || true
+
+ printf '%s\n' $(voltctl -m 32MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 32MB logicaldevice flows # > $LOG_FOLDER/voltha-logicaldevice-flows-#.txt" || true
+ printf '%s\n' $(voltctl -m 32MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 32MB logicaldevice port list # > $LOG_FOLDER/voltha-logicaldevice-ports-#.txt" || true
+ '''
+ } catch(e) {
+ sh '''
+ echo "Can't get device list from voltclt"
+ '''
+ }
+ }
+ // get cpu usage by container
+ sh '''
+ if [ ${withMonitoring} = true ] ; then
+ cd $WORKSPACE/voltha-system-tests
+ make vst_venv
+ source ./vst_venv/bin/activate || true
+ sleep 60 # we have to wait for prometheus to collect all the information
+ python scripts/sizing.py -o $WORKSPACE/plots || true
+ fi
+ '''
+ archiveArtifacts artifacts: 'execution-time.txt,logs/*,logs/pprof/*,RobotLogs/**/*,plots/*,etcd-metrics/*'
+ }
+ }
+}
+
+def start_port_forward(olts) {
+ sh """
+ bbsimRestPortFwd=50071
+ for i in {0..${olts.toInteger() - 1}}; do
+ daemonize -E JENKINS_NODE_COOKIE="dontKillMe" /usr/local/bin/kubectl port-forward --address 0.0.0.0 -n default svc/bbsim\${i} \${bbsimRestPortFwd}:50071
+ ((bbsimRestPortFwd++))
+ done
+ """
+}