[VOL-5010] - Clone unit tests onto a v2.12 branch
[VOL-5005] - Create a v2.12 release branch for test jobs.
[VOL-5004] - Deprecate voltha-2.8 unit tests
makefiles/release/include.mk
makefiles/release/help.mk
makefiles/release/voltha-versions.mk
makefiles/release/targets.mk
makefiles/release/targets/voltha-certification.mk
makefiles/release/targets/voltha-e2e.mk
makefiles/release/targets/voltha-nightly-jobs.mk
-------------------------------------------------
o Define make targets to create versioned subdirectories.
o 'branched' unit test files will live in subdirs.
o Refactoring still in progress, v2.8 tests are disabled/retired in the interim.
jjb/voltha-e2e.yaml
jjb/pipeline/voltha/voltha-2.12/
jjb/voltha-test/voltha-nightly-jobs/voltha-2.12.yaml
----------------------------------------------------
o Create versioned subdirectories to support v2.12 unit testing.
jjb/voltha-e2e.yaml
jjb/voltha-e2e/voltha-master.yaml
jjb/voltha-e2e/voltha-2.12.yaml
jjb/voltha-e2e/voltha-2.8.yaml
--------------------------------
o Guineapig: periodic-voltha-pm-data-test-bbsim
o Refactor unit test from voltha-e2e.yaml.
o Create new v2.12 pipeline job.
o Disable pre-lts legacy pipeline job 2.8
o Refactoring one test so job state in all branches can be checked.
o Tomorrow verify the v2.8 job did not launch
Change-Id: Ib550fae395e1a416466c2f5fb9640be8405dc39e
diff --git a/jjb/pipeline/voltha/voltha-2.12/voltha-tt-physical-functional-tests.groovy b/jjb/pipeline/voltha/voltha-2.12/voltha-tt-physical-functional-tests.groovy
new file mode 100644
index 0000000..1eacba9
--- /dev/null
+++ b/jjb/pipeline/voltha/voltha-2.12/voltha-tt-physical-functional-tests.groovy
@@ -0,0 +1,265 @@
+// -*- groovy -*-
+// -----------------------------------------------------------------------
+// Copyright 2017-2023 Open Networking Foundation (ONF) and the ONF Contributors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// -----------------------------------------------------------------------
+
+library identifier: 'cord-jenkins-libraries@master',
+ retriever: modernSCM([
+ $class: 'GitSCMSource',
+ remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+node {
+ // Need this so that deployment_config has global scope when it's read later
+ deployment_config = null
+}
+
+def infraNamespace = "infra"
+def volthaNamespace = "voltha"
+
+pipeline {
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: "${timeout}", unit: 'MINUTES')
+ }
+
+ environment {
+ KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
+ VOLTCONFIG="$HOME/.volt/config-minimal"
+ PATH="$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+ }
+
+ stages {
+ stage('Clone voltha-system-tests') {
+ steps {
+ step([$class: 'WsCleanup'])
+ checkout([
+ $class: 'GitSCM',
+ userRemoteConfigs: [[
+ url: "https://gerrit.opencord.org/voltha-system-tests",
+ refspec: "${volthaSystemTestsChange}"
+ ]],
+ branches: [[ name: "${branch}", ]],
+ extensions: [
+ [$class: 'WipeWorkspace'],
+ [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"],
+ [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+ ],
+ ])
+ script {
+ sh(script:"""
+ if [ '${volthaSystemTestsChange}' != '' ] ; then
+ cd $WORKSPACE/voltha-system-tests;
+ git fetch https://gerrit.opencord.org/voltha-system-tests ${volthaSystemTestsChange} && git checkout FETCH_HEAD
+ fi
+ """)
+ }
+ }
+ }
+ // This checkout allows us to show changes in Jenkins
+ // we only do this on master as we don't branch all the repos for all the releases
+ // (we should compute the difference by tracking the container version, not the code)
+ stage('Download All the VOLTHA repos') {
+ when {
+ expression {
+ return "${branch}" == 'master';
+ }
+ }
+ steps {
+ checkout(changelog: true,
+ poll: false,
+ scm: [$class: 'RepoScm',
+ manifestRepositoryUrl: "${params.manifestUrl}",
+ manifestBranch: "${params.branch}",
+ currentBranch: true,
+ destinationDir: 'voltha',
+ forceSync: true,
+ resetFirst: true,
+ quiet: true,
+ jobs: 4,
+ showAllChanges: true]
+ )
+ }
+ }
+ stage ('Initialize')
+ {
+ steps
+ {
+ sh returnStdout: false, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
+ script
+ {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+ }
+
+ installVoltctl("${branch}")
+
+ sh returnStdout: false, script: """
+ mkdir -p "$WORKSPACE/bin"
+
+ # install kail
+ make -C "$WORKSPACE/voltha-system-tests" KAIL_PATH="$WORKSPACE/bin" kail
+
+ # Default kind-voltha config doesn't work on ONF demo pod for accessing kvstore.
+ # The issue is that the mgmt node is also one of the k8s nodes and so port forwarding doesn't work.
+ # We should change this. In the meantime here is a workaround.
+ if [ "${params.branch}" == "master" ]; then
+ set +e
+
+
+ # Remove noise from voltha-core logs
+ voltctl log level set WARN read-write-core#github.com/opencord/voltha-go/db/model
+ voltctl log level set WARN read-write-core#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+ # Remove noise from openolt logs
+ voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/db
+ voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/probe
+ voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+ fi
+ """
+ }
+ }
+
+ stage('Functional Tests') {
+ environment {
+ ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+ ROBOT_FILE="Voltha_TT_PODTests.robot"
+ ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/tt-workflow/FunctionalTests"
+ }
+ steps {
+ sh """
+ mkdir -p $ROBOT_LOGS_DIR
+ if ( ${powerSwitch} ); then
+ export ROBOT_MISC_ARGS="--removekeywords wuks -i functionalTT -i PowerSwitch -i sanityTT -i sanityTT-MCAST -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+ if ( ${powerCycleOlt} ); then
+ ROBOT_MISC_ARGS+=" -v power_cycle_olt:True"
+ fi
+ else
+ export ROBOT_MISC_ARGS="--removekeywords wuks -i functionalTT -e PowerSwitch -i sanityTT -i sanityTT-MCAST -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+ fi
+ ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+ make -C $WORKSPACE/voltha-system-tests voltha-tt-test || true
+ """
+ }
+ }
+
+ stage('Failure/Recovery Tests') {
+ environment {
+ ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+ ROBOT_FILE="Voltha_TT_FailureScenarios.robot"
+ ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/tt-workflow/FailureScenarios"
+ }
+ steps {
+ sh """
+ mkdir -p $ROBOT_LOGS_DIR
+ if [ ${params.enableMultiUni} = false ]; then
+ if ( ${powerSwitch} ); then
+ export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functionalTT -i PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+ else
+ export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functionalTT -e PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+ fi
+ ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+ make -C $WORKSPACE/voltha-system-tests voltha-tt-test || true
+ fi
+ """
+ }
+ }
+
+ stage('Multi-Tcont Tests') {
+ environment {
+ ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+ ROBOT_FILE="Voltha_TT_MultiTcontTests.robot"
+ ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/tt-workflow/MultiTcontScenarios"
+ ROBOT_TEST_INPUT_FILE="$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-TT-multi-tcont-tests-input.yaml"
+ }
+ steps {
+ sh """
+ mkdir -p $ROBOT_LOGS_DIR
+ if [ ${params.enableMultiUni} = false ]; then
+ if ( ${powerSwitch} ); then
+ export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functionalTT -i PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v teardown_device:False -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel} -V $ROBOT_TEST_INPUT_FILE"
+ else
+ export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functionalTT -e PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v teardown_device:False -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel} -V $ROBOT_TEST_INPUT_FILE"
+ fi
+ ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+ make -C $WORKSPACE/voltha-system-tests voltha-tt-test || true
+ fi
+ """
+ }
+ }
+
+ stage('Multicast Tests') {
+ environment {
+ ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+ ROBOT_FILE="Voltha_TT_MulticastTests.robot"
+ ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/tt-workflow/MulticastTests"
+ ROBOT_TEST_INPUT_FILE="$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-TT-multicast-tests-input.yaml"
+ }
+ steps {
+ sh """
+ mkdir -p $ROBOT_LOGS_DIR
+ if [ ${params.enableMultiUni} = true ]; then
+ if ( ${powerSwitch} ); then
+ export ROBOT_MISC_ARGS="--removekeywords wuks -i multicastTT -i PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v teardown_device:False -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel} -V $ROBOT_TEST_INPUT_FILE"
+ else
+ export ROBOT_MISC_ARGS="--removekeywords wuks -i multicastTT -e PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v teardown_device:False -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel} -V $ROBOT_TEST_INPUT_FILE"
+ fi
+ ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+ make -C $WORKSPACE/voltha-system-tests voltha-tt-test || true
+ fi
+ """
+ }
+ }
+
+ }
+ post {
+ always {
+ getPodsInfo("$WORKSPACE/pods")
+ sh returnStdout: false, script: '''
+ set +e
+
+ # collect logs collected in the Robot Framework StartLogging keyword
+ cd $WORKSPACE
+ gzip *-combined.log || true
+ rm *-combined.log || true
+ '''
+ script {
+ deployment_config.olts.each { olt ->
+ if (olt.type == null || olt.type == "" || olt.type == "openolt") {
+ sh returnStdout: false, script: """
+ sshpass -p ${olt.pass} scp ${olt.user}@${olt.sship}:/var/log/openolt.log $WORKSPACE/openolt-${olt.sship}.log || true
+ sshpass -p ${olt.pass} scp ${olt.user}@${olt.sship}:/var/log/dev_mgmt_daemon.log $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log || true
+ sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt-${olt.sship}.log # Remove escape sequences
+ sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log # Remove escape sequences
+ """
+ }
+ }
+ }
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: '**/log*.html',
+ otherFiles: '',
+ outputFileName: '**/output*.xml',
+ outputPath: 'RobotLogs',
+ passThreshold: 100,
+ reportFileName: '**/report*.html',
+ unstableThreshold: 0,
+ onlyCritical: true
+ ]);
+ archiveArtifacts artifacts: '**/*.log,**/*.gz,**/*.tgz,*.txt,pods/*.txt'
+ }
+ }
+}