diff --git a/jjb/pipeline/voltha/voltha-2.9/physical-build.groovy b/jjb/pipeline/voltha/voltha-2.9/physical-build.groovy
new file mode 100644
index 0000000..28241f8
--- /dev/null
+++ b/jjb/pipeline/voltha/voltha-2.9/physical-build.groovy
@@ -0,0 +1,404 @@
+// Copyright 2017-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// used to deploy VOLTHA and configure ONOS physical PODs
+
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+def infraNamespace = "infra"
+def volthaNamespace = "voltha"
+
+def deploy_custom_oltAdapterChart(namespace, name, chart, extraHelmFlags) {
+  sh """
+    helm install --create-namespace --set defaults.image_pullPolicy=Always --namespace ${namespace} ${extraHelmFlags} ${name} ${chart}
+   """
+}
+
+pipeline {
+
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+    timeout(time: 35, unit: 'MINUTES')
+  }
+  environment {
+    PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+    KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
+  }
+
+  stages{
+    stage('Download Code') {
+      steps {
+        getVolthaCode([
+          branch: "${branch}",
+          volthaSystemTestsChange: "${volthaSystemTestsChange}",
+          volthaHelmChartsChange: "${volthaHelmChartsChange}",
+        ])
+      }
+    }
+    stage ("Parse deployment configuration file") {
+      steps {
+        sh returnStdout: true, script: "rm -rf ${configBaseDir}"
+        sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
+        script {
+          if ( params.workFlow == "DT" ) {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+          }
+          else if ( params.workFlow == "TT" )
+          {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+          }
+          else
+          {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+          }
+        }
+      }
+    }
+    stage('Clean up') {
+      steps {
+        timeout(15) {
+          script {
+            helmTeardown(["default", infraNamespace, volthaNamespace])
+          }
+          timeout(1) {
+            sh returnStdout: false, script: '''
+            # remove orphaned port-forward from different namespaces
+            ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
+            '''
+          }
+        }
+      }
+    }
+    stage('Install Voltha')  {
+      steps {
+        timeout(20) {
+          installVoltctl("${branch}")
+          script {
+            // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
+            def localCharts = false
+            if (volthaHelmChartsChange != "") {
+              localCharts = true
+            }
+
+            // should the config file be suffixed with the workflow? see "deployment_config"
+            def localHelmFlags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml --set global.log_level=${logLevel} "
+
+            if (workFlow.toLowerCase() == "dt") {
+              localHelmFlags += " --set radius.enabled=false "
+            }
+            if (workFlow.toLowerCase() == "tt") {
+              localHelmFlags += " --set radius.enabled=false --set global.incremental_evto_update=true "
+                if (enableMultiUni.toBoolean()) {
+                    localHelmFlags += " --set voltha-adapter-openonu.adapter_open_onu.uni_port_mask=${uniPortMask} "
+                }
+            }
+
+            // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
+            // and to connect the ofagent to all instances of ONOS
+            localHelmFlags = localHelmFlags + " --set onos-classic.onosSshPort=30115 " +
+            "--set onos-classic.onosApiPort=30120 " +
+            "--set onos-classic.onosOfPort=31653 " +
+            "--set onos-classic.individualOpenFlowNodePorts=true " +
+            "--set voltha.onos_classic.replicas=${params.NumOfOnos}"
+
+            if (bbsimReplicas.toInteger() != 0) {
+              localHelmFlags = localHelmFlags + " --set onu=${onuNumber},pon=${ponNumber} "
+            }
+
+            // adding user specified helm flags at the end so they'll have priority over everything else
+            localHelmFlags = localHelmFlags + " ${extraHelmFlags}"
+
+            def numberOfAdaptersToWait = 2
+
+            if(openoltAdapterChart != "onf/voltha-adapter-openolt") {
+              localHelmFlags = localHelmFlags + " --set voltha-adapter-openolt.enabled=false"
+              // We skip waiting for adapters in the volthaDeploy step because it's already waiting for
+              // both of them after the deployment of the custom olt adapter. See line 156.
+              numberOfAdaptersToWait = 0
+            }
+
+            volthaDeploy([
+              workflow: workFlow.toLowerCase(),
+              extraHelmFlags: localHelmFlags,
+              localCharts: localCharts,
+              kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
+              onosReplica: params.NumOfOnos,
+              atomixReplica: params.NumOfAtomix,
+              kafkaReplica: params.NumOfKafka,
+              etcdReplica: params.NumOfEtcd,
+              bbsimReplica: bbsimReplicas.toInteger(),
+              adaptersToWait: numberOfAdaptersToWait,
+              ])
+
+            if(openoltAdapterChart != "onf/voltha-adapter-openolt"){
+              extraHelmFlags = extraHelmFlags + " --set global.log_level=${logLevel}"
+              deploy_custom_oltAdapterChart(volthaNamespace, oltAdapterReleaseName, openoltAdapterChart, extraHelmFlags)
+              waitForAdapters([
+                adaptersToWait: 2
+              ])
+            }
+          }
+          sh """
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-api" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG="etcd" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd ${params.VolthaEtcdPort}:2379; done"&
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG="kafka" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
+          ps aux | grep port-forward
+          """
+          getPodsInfo("$WORKSPACE")
+        }
+      }
+    }
+    stage('Push Tech-Profile') {
+      steps {
+        script {
+          if ( params.configurePod && params.profile != "Default" ) {
+            for(int i=0; i < deployment_config.olts.size(); i++) {
+              def tech_prof_directory = "XGS-PON"
+              if (deployment_config.olts[i].containsKey("board_technology")){
+                tech_prof_directory = deployment_config.olts[i]["board_technology"]
+              }
+              timeout(1) {
+                sh returnStatus: true, script: """
+                export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+                etcd_container=\$(kubectl get pods -n ${infraNamespace} -l app.kubernetes.io/name=etcd --no-headers | awk 'NR==1{print \$1}')
+                if [[ "${workFlow}" == "TT" ]]; then
+                   if [[ "${params.enableMultiUni}" == "true" ]]; then
+                      kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-HSIA.json \$etcd_container:/tmp/hsia.json
+                      kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
+                      kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-VoIP.json \$etcd_container:/tmp/voip.json
+                      kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65'
+                      kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-MCAST-AdditionalBW-None.json \$etcd_container:/tmp/mcast_additionalBW_none.json
+                      kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_none.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66'
+                      kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast_additionalBW_na.json
+                      kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_na.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/67'
+                   else
+                      kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json
+                      kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
+                      kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json
+                      kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65'
+                      kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-None.json \$etcd_container:/tmp/mcast_additionalBW_none.json
+                      kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_none.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66'
+                      kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast_additionalBW_na.json
+                      kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_na.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/67'
+                   fi
+                else
+                   kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json \$etcd_container:/tmp/flexpod.json
+                   kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
+                fi
+                """
+              }
+              timeout(1) {
+                sh returnStatus: true, script: """
+                export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+                etcd_container=\$(kubectl get pods -n ${infraNamespace} -l app.kubernetes.io/name=etcd --no-headers | awk 'NR==1{print \$1}')
+                kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/technology_profiles/${tech_prof_directory}/64'
+                """
+              }
+            }
+          }
+        }
+      }
+    }
+    stage('Push MIB templates') {
+      steps {
+        sh """
+        export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+        etcd_container=\$(kubectl get pods -n ${infraNamespace} -l app.kubernetes.io/name=etcd --no-headers | awk 'NR==1{print \$1}')
+        kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Alpha.json \$etcd_container:/tmp/MIB_Alpha.json
+        kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
+        kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
+        kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Scom.json \$etcd_container:/tmp/MIB_Scom.json
+        kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/SCOM/Glasfaser-Modem/090140.1.0.304'
+        kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/SCOM/Glasfaser-Modem/090140.1.0.304'
+        """
+      }
+    }
+    stage('Push Sadis-config') {
+      steps {
+        timeout(1) {
+          sh returnStatus: true, script: """
+          if [[ "${workFlow}" == "DT" ]]; then
+            curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json
+          elif [[ "${workFlow}" == "TT" ]]; then
+            curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json
+          else
+            # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file
+            curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
+          fi
+          """
+        }
+      }
+    }
+    stage('Switch Configurations in ONOS') {
+      steps {
+        script {
+          if ( deployment_config.fabric_switches.size() > 0 ) {
+            timeout(1) {
+              def netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch.json"
+              if (params.inBandManagement){
+                netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch-inband.json"
+              }
+              sh """
+              curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @${netcfg}
+              curl -sSL --user karaf:karaf -X POST http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting/active
+              """
+            }
+            timeout(1) {
+              setOnosLogLevels([
+                  onosNamespace: infraNamespace,
+                  apps: [
+                    'org.opencord.dhcpl2relay',
+                    'org.opencord.olt',
+                    'org.opencord.aaa',
+                    'org.onosproject.net.flowobjective.impl.FlowObjectiveManager',
+                    'org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager'
+                  ]
+              ])
+              waitUntil {
+                sr_active_out = sh returnStatus: true, script: """
+                curl -sSL --user karaf:karaf -X GET http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting | jq '.state' | grep ACTIVE
+                sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled false"
+                sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.flow.impl.FlowRuleManager purgeOnDisconnection false"
+                sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.meter.impl.MeterManager purgeOnDisconnection false"
+                """
+                return sr_active_out == 0
+              }
+            }
+            timeout(5) {
+              for(int i=0; i < deployment_config.hosts.src.size(); i++) {
+                for(int j=0; j < deployment_config.olts.size(); j++) {
+                  def aggPort = -1
+                  if(deployment_config.olts[j].serial == deployment_config.hosts.src[i].olt){
+                      aggPort = deployment_config.olts[j].aggPort
+                      if(aggPort == -1){
+                        throw new Exception("Upstream port for the olt is not configured, field aggPort is empty")
+                      }
+                      sh """
+                      sleep 10 # NOTE why are we sleeping?
+                      curl -X POST --user karaf:karaf --header 'Content-Type: application/json' --header 'Accept: application/json' -d '{"deviceId": "${deployment_config.fabric_switches[0].device_id}", "vlanId": "${deployment_config.hosts.src[i].s_tag}", "endpoints": [${deployment_config.fabric_switches[0].bngPort},${aggPort}]}' 'http://${deployment_config.nodes[0].ip}:30120/onos/segmentrouting/xconnect'
+                      """
+                  }
+                }
+              }
+            }
+          }
+        }
+      }
+    }
+    stage('Reinstall OLT software') {
+      steps {
+        script {
+          if ( params.reinstallOlt ) {
+            for(int i=0; i < deployment_config.olts.size(); i++) {
+              // NOTE what is oltDebVersion23? is that for VOLTHA-2.3? do we still need this differentiation?
+              sh returnStdout: true, script: """
+              ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+              if [ "${params.inBandManagement}" == "true" ]; then
+                sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
+              fi
+              sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
+              sleep 10
+              """
+              timeout(5) {
+                waitUntil {
+                  olt_sw_present = sh returnStdout: true, script: """
+                  if [ "${deployment_config.olts[i].oltDebVersion}" == *"asfvolt16"* ]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asfvolt16 | wc -l'
+                  else
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asgvolt64 | wc -l'
+                  fi
+                  if (${deployment_config.olts[i].fortygig}); then
+                    if [[ "${params.inBandManagement}" == "true" ]]; then
+                      ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+                      sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'mkdir -p /opt/openolt/'
+                      sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/watchdog-script/* /opt/openolt/'
+                      sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/bal_cli_appl/example_user_appl /broadcom'
+                      sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp in-band-startup-script/* /etc/init.d/'
+                    fi
+                  fi
+                  """
+                  return olt_sw_present.toInteger() > 0
+                }
+              }
+            }
+          }
+        }
+      }
+    }
+    stage('Restart OLT processes') {
+      steps {
+        script {
+          //rebooting OLTs
+          for(int i=0; i < deployment_config.olts.size(); i++) {
+            timeout(15) {
+              sh returnStdout: true, script: """
+              ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+              sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; rm -f /var/log/openolt_process_watchdog.log; reboot > /dev/null &' || true
+              """
+            }
+          }
+          sh returnStdout: true, script: """
+          sleep ${params.waitTimerForOltUp}
+          """
+          //Checking dev_management_deamon and openoltprocesses
+          for(int i=0; i < deployment_config.olts.size(); i++) {
+            if ( params.oltAdapterReleaseName != "open-olt" ) {
+              timeout(15) {
+                waitUntil {
+                  devprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep dev_mgmt_daemon | wc -l'"
+                  return devprocess.toInteger() > 0
+                }
+              }
+              timeout(15) {
+                waitUntil {
+                  openoltprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep openolt | wc -l'"
+                  return openoltprocess.toInteger() > 0
+                }
+              }
+            }
+          }
+        }
+      }
+    }
+  }
+
+  post {
+    aborted {
+      getPodsInfo("$WORKSPACE/failed")
+      sh """
+      kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/failed/voltha.log || true
+      """
+      archiveArtifacts artifacts: '**/*.log,**/*.txt'
+    }
+    failure {
+      getPodsInfo("$WORKSPACE/failed")
+      sh """
+      kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/failed/voltha.logs || true
+      """
+      archiveArtifacts artifacts: '**/*.log,**/*.txt'
+    }
+    always {
+      archiveArtifacts artifacts: '*.txt'
+    }
+  }
+}
diff --git a/jjb/pipeline/voltha/voltha-2.9/voltha-physical-functional-tests.groovy b/jjb/pipeline/voltha/voltha-2.9/voltha-physical-functional-tests.groovy
new file mode 100644
index 0000000..762214b
--- /dev/null
+++ b/jjb/pipeline/voltha/voltha-2.9/voltha-physical-functional-tests.groovy
@@ -0,0 +1,260 @@
+// Copyright 2017-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+def infraNamespace = "infra"
+def volthaNamespace = "voltha"
+
+node {
+  // Need this so that deployment_config has global scope when it's read later
+  deployment_config = null
+}
+
+pipeline {
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+    timeout(time: "${timeout}", unit: 'MINUTES')
+  }
+
+  environment {
+    KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
+    VOLTCONFIG="$HOME/.volt/config-minimal"
+    PATH="$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+  }
+  stages {
+    stage('Clone voltha-system-tests') {
+      steps {
+        step([$class: 'WsCleanup'])
+        checkout([
+          $class: 'GitSCM',
+          userRemoteConfigs: [[
+            url: "https://gerrit.opencord.org/voltha-system-tests",
+            refspec: "${volthaSystemTestsChange}"
+          ]],
+          branches: [[ name: "${branch}", ]],
+          extensions: [
+            [$class: 'WipeWorkspace'],
+            [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"],
+            [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+          ],
+        ])
+        script {
+          sh(script:"""
+            if [ '${volthaSystemTestsChange}' != '' ] ; then
+              cd $WORKSPACE/voltha-system-tests;
+              git fetch https://gerrit.opencord.org/voltha-system-tests ${volthaSystemTestsChange} && git checkout FETCH_HEAD
+            fi
+            """)
+        }
+      }
+    }
+    stage('Download All the VOLTHA repos') {
+      when {
+        expression {
+          return "${branch}" == 'master';
+        }
+      }
+      steps {
+       checkout(changelog: true,
+         poll: false,
+         scm: [$class: 'RepoScm',
+           manifestRepositoryUrl: "${params.manifestUrl}",
+           manifestBranch: "${params.branch}",
+           currentBranch: true,
+           destinationDir: 'voltha',
+           forceSync: true,
+           resetFirst: true,
+           quiet: true,
+           jobs: 4,
+           showAllChanges: true]
+         )
+      }
+    }
+    stage ('Initialize') {
+      steps {
+        sh returnStdout: false, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
+        script {
+          deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+        }
+        installVoltctl("${branch}")
+        sh returnStdout: false, script: """
+        mkdir -p $WORKSPACE/bin
+        # download kail
+        bash <( curl -sfL https://raw.githubusercontent.com/boz/kail/master/godownloader.sh) -b "$WORKSPACE/bin"
+
+        if [ "${params.branch}" == "voltha-2.9" ]; then
+        # Default kind-voltha config doesn't work on ONF demo pod for accessing kvstore.
+        # The issue is that the mgmt node is also one of the k8s nodes and so port forwarding doesn't work.
+        # We should change this. In the meantime here is a workaround.
+           set +e
+
+        # Remove noise from voltha-core logs
+           voltctl log level set WARN read-write-core#github.com/opencord/voltha-go/db/model
+           voltctl log level set WARN read-write-core#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+        # Remove noise from openolt logs
+           voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/db
+           voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/probe
+           voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+        fi
+        """
+      }
+    }
+
+    stage('Functional Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+        ROBOT_FILE="Voltha_PODTests.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/FunctionalTests"
+      }
+      steps {
+        sh """
+        mkdir -p $ROBOT_LOGS_DIR
+        if ( ${powerSwitch} ); then
+             export ROBOT_MISC_ARGS="--removekeywords wuks -i PowerSwitch -i sanity -i functional -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+        else
+             export ROBOT_MISC_ARGS="--removekeywords wuks -e PowerSwitch -i sanity -i functional -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+        fi
+        ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+        make -C $WORKSPACE/voltha-system-tests voltha-test || true
+        """
+      }
+    }
+
+    stage('Failure/Recovery Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+        ROBOT_FILE="Voltha_FailureScenarios.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/FailureScenarios"
+      }
+      steps {
+        sh """
+        mkdir -p $ROBOT_LOGS_DIR
+        if ( ${powerSwitch} ); then
+             export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functional -i PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+        else
+             export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functional -e PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+        fi
+        ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+        make -C $WORKSPACE/voltha-system-tests voltha-test || true
+        """
+      }
+    }
+
+    stage('Dataplane Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+        ROBOT_FILE="Voltha_PODTests.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/DataplaneTests"
+      }
+      steps {
+        sh """
+        mkdir -p $ROBOT_LOGS_DIR
+        export ROBOT_MISC_ARGS="--removekeywords wuks -i dataplane -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+        ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+        make -C $WORKSPACE/voltha-system-tests voltha-test || true
+        """
+      }
+    }
+    stage('HA Tests') {
+       environment {
+       ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+       ROBOT_FILE="Voltha_ONOSHATests.robot"
+       ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/ONOSHAScenarios"
+      }
+      steps {
+       sh """
+       mkdir -p $ROBOT_LOGS_DIR
+       export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v workflow:${params.workFlow} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+       ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+       make -C $WORKSPACE/voltha-system-tests voltha-test || true
+       """
+      }
+    }
+
+    stage('Error Scenario Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+        ROBOT_FILE="Voltha_ErrorScenarios.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/ErrorScenarios"
+      }
+      steps {
+        sh """
+        mkdir -p $ROBOT_LOGS_DIR
+        export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functional -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+        ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+        make -C $WORKSPACE/voltha-system-tests voltha-test || true
+        """
+      }
+    }
+  }
+  post {
+    always {
+      getPodsInfo("$WORKSPACE/pods")
+      sh returnStdout: false, script: '''
+      set +e
+
+      # collect logs collected in the Robot Framework StartLogging keyword
+      cd $WORKSPACE
+      gzip *-combined.log || true
+      rm *-combined.log || true
+
+      # store information on the running pods
+      kubectl get pods --all-namespaces -o wide > $WORKSPACE/pods.txt || true
+      kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq | tee $WORKSPACE/pod-images.txt || true
+      kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq | tee $WORKSPACE/pod-imagesId.txt || true
+
+
+      # collect ETCD cluster logs
+      mkdir -p $WORKSPACE/etcd
+      printf '%s\n' $(kubectl get pods -l app=etcd -o=jsonpath="{.items[*]['metadata.name']}") | xargs -I% bash -c "kubectl logs % > $WORKSPACE/etcd/%.log"
+      '''
+      script {
+        deployment_config.olts.each { olt ->
+          if (olt.type == null || olt.type == "" || olt.type == "openolt") {
+            sh returnStdout: false, script: """
+            sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/openolt.log $WORKSPACE/openolt-${olt.sship}.log || true
+            sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt-${olt.sship}.log  # Remove escape sequences
+            sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/dev_mgmt_daemon.log $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log || true
+            sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log  # Remove escape sequences
+            sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/startup.log $WORKSPACE/startup-${olt.sship}.log || true
+            sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/startup-${olt.sship}.log || true # Remove escape sequences
+            sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/openolt_process_watchdog.log $WORKSPACE/openolt_process_watchdog-${olt.sship}.log || true
+            sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt_process_watchdog-${olt.sship}.log || true # Remove escape sequences
+            """
+          }
+        }
+      }
+      step([$class: 'RobotPublisher',
+        disableArchiveOutput: false,
+        logFileName: '**/log*.html',
+        otherFiles: '',
+        outputFileName: '**/output*.xml',
+        outputPath: 'RobotLogs',
+        passThreshold: 100,
+        reportFileName: '**/report*.html',
+        unstableThreshold: 0,
+        onlyCritical: true
+        ]);
+      archiveArtifacts artifacts: '**/*.log,**/*.gz,**/*.tgz,*.txt,pods/*.txt'
+    }
+  }
+}