diff --git a/jjb/cord-test/voltha.yaml b/jjb/cord-test/voltha.yaml
index 9d6f665..1434069 100644
--- a/jjb/cord-test/voltha.yaml
+++ b/jjb/cord-test/voltha.yaml
@@ -426,6 +426,7 @@
           Jenkinsfile: 'Jenkinsfile-voltha-build'
           configurePod: true
           profile: '1T8GEM'
+          in-band-management: true
           time: '10'
 
 
@@ -439,6 +440,7 @@
           branch: 'master'
           test-repo: 'voltha-system-tests'
           profile: '1T8GEM'
+          in-band-management: true
           power-switch: True
           pipeline-script: 'voltha-dt-physical-functional-tests-openonu-go.groovy'
 
@@ -626,6 +628,7 @@
           test-repo: 'voltha-system-tests'
           profile: '1T8GEM'
           power-switch: True
+          pipeline-script: 'voltha-dt-physical-functional-tests.groovy'
 
      # Berlin pod with olt/onu - voltha-2.5 Default tech profile and timer based job
       - 'build_voltha_pod_release_timer':
@@ -771,7 +774,7 @@
           test-repo: 'voltha-system-tests'
           profile: '1T8GEM'
           power-switch: True
-          pipeline-script: 'voltha-dt-physical-functional-tests-openonu-go.groovy'
+          pipeline-script: 'voltha-dt-physical-functional-tests.groovy'
 
      # Berlin pod with gpon olt/onu - voltha-2.4 1T8GEM tech profile and timer based job
       - 'build_voltha_pod_release_timer':
diff --git a/jjb/pipeline/voltha-scale-multi-stack.groovy b/jjb/pipeline/voltha-scale-multi-stack.groovy
new file mode 100644
index 0000000..1bc7b5b
--- /dev/null
+++ b/jjb/pipeline/voltha-scale-multi-stack.groovy
@@ -0,0 +1,714 @@
+// Copyright 2019-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// deploy VOLTHA using kind-voltha and performs a scale test
+
+pipeline {
+
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+      timeout(time: 60, unit: 'MINUTES')
+  }
+  environment {
+    JENKINS_NODE_COOKIE="dontKillMe" // do not kill processes after the build is done
+    KUBECONFIG="$HOME/.kube/config"
+    SSHPASS="karaf"
+    PATH="$PATH:$WORKSPACE/kind-voltha/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+    SCHEDULE_ON_CONTROL_NODES="yes"
+    FANCY=0
+    WAIT_ON_DOWN="yes"
+    WITH_SIM_ADAPTERS="no"
+    WITH_RADIUS="${withRadius}"
+    WITH_BBSIM="yes"
+    LEGACY_BBSIM_INDEX="no"
+    DEPLOY_K8S="no"
+    CONFIG_SADIS="external"
+    WITH_KAFKA="yes"
+    WITH_ETCD="yes"
+    VOLTHA_ETCD_PORT=9999
+
+    // VOLTHA namespaces are defined at runtime depending on the stack we're installing
+    // VOLTHA_NS="default"
+    // ADAPTER_NS="default"
+    // BBSIM_NS="default"
+    INFRA_NS="infra"
+
+    // configurable options
+    WITH_EAPOL="${withEapol}"
+    WITH_DHCP="${withDhcp}"
+    WITH_IGMP="${withIgmp}"
+    VOLTHA_LOG_LEVEL="${logLevel}"
+    NUM_OF_BBSIM="${olts}"
+    NUM_OF_OPENONU="${openonuAdapterReplicas}"
+    NUM_OF_ONOS="${onosReplicas}"
+    NUM_OF_ATOMIX="${atomixReplicas}"
+    NUM_OF_KAFKA="${kafkaReplicas}"
+    NUM_OF_ETCD="${etcdReplicas}"
+    WITH_PPROF="${withProfiling}"
+    EXTRA_HELM_FLAGS="${extraHelmFlags} " // note that the trailing space is required to separate the parameters from appends done later
+    VOLTHA_CHART="${volthaChart}"
+    VOLTHA_BBSIM_CHART="${bbsimChart}"
+    VOLTHA_ADAPTER_OPEN_OLT_CHART="${openoltAdapterChart}"
+    VOLTHA_ADAPTER_OPEN_ONU_CHART="${openonuAdapterChart}"
+    ONOS_CLASSIC_CHART="${onosChart}"
+    RADIUS_CHART="${radiusChart}"
+
+    APPS_TO_LOG="etcd kafka onos-onos-classic adapter-open-onu adapter-open-olt rw-core ofagent bbsim radius"
+    LOG_FOLDER="$WORKSPACE/logs"
+
+    GERRIT_PROJECT="${GERRIT_PROJECT}"
+  }
+
+  stages {
+    stage ('Cleanup') {
+      steps {
+        timeout(time: 11, unit: 'MINUTES') {
+          sh returnStdout: false, script: """
+            helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com
+            helm repo add stable https://kubernetes-charts.storage.googleapis.com
+            helm repo add onf https://charts.opencord.org
+            helm repo add cord https://charts.opencord.org
+            helm repo add onos https://charts.onosproject.org
+            helm repo add atomix https://charts.atomix.io
+            helm repo add bbsim-sadis https://ciena.github.io/bbsim-sadis-server/charts
+            helm repo update
+
+            # removing ETCD port forward
+            P_ID="\$(ps e -ww -A | grep "_TAG=etcd-port-forward" | grep -v grep | awk '{print \$1}')"
+            if [ -n "\$P_ID" ]; then
+              kill -9 \$P_ID
+            fi
+
+            for hchart in \$(helm list -q | grep -E -v 'docker-registry|kafkacat');
+            do
+                echo "Purging chart: \${hchart}"
+                helm delete "\${hchart}"
+            done
+            bash /home/cord/voltha-scale/wait_for_pods.sh
+
+            test -e $WORKSPACE/kind-voltha/voltha && cd $WORKSPACE/kind-voltha && ./voltha down
+
+            ps aux | grep port-forw | grep -v grep | awk '{print \$2}' | xargs kill -9
+
+            cd $WORKSPACE
+            rm -rf $WORKSPACE/*
+          """
+        }
+      }
+    }
+    stage('Clone kind-voltha') {
+      steps {
+        checkout([
+          $class: 'GitSCM',
+          userRemoteConfigs: [[
+            url: "https://gerrit.opencord.org/kind-voltha",
+            refspec: "${kindVolthaChange}"
+          ]],
+          branches: [[ name: "master", ]],
+          extensions: [
+            [$class: 'WipeWorkspace'],
+            [$class: 'RelativeTargetDirectory', relativeTargetDir: "kind-voltha"],
+            [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+          ],
+        ])
+        script {
+          sh(script:"""
+          if [ '${kindVolthaChange}' != '' ] ; then
+            cd $WORKSPACE/kind-voltha;
+            git fetch https://gerrit.opencord.org/kind-voltha ${kindVolthaChange} && git checkout FETCH_HEAD
+          fi
+          """)
+        }
+      }
+    }
+    stage('Clone voltha-system-tests') {
+      steps {
+        checkout([
+          $class: 'GitSCM',
+          userRemoteConfigs: [[
+            url: "https://gerrit.opencord.org/voltha-system-tests",
+            refspec: "${volthaSystemTestsChange}"
+          ]],
+          branches: [[ name: "${release}", ]],
+          extensions: [
+            [$class: 'WipeWorkspace'],
+            [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"],
+            [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+          ],
+        ])
+        script {
+          sh(script:"""
+            if [ '${volthaSystemTestsChange}' != '' ] ; then
+              cd $WORKSPACE/voltha-system-tests;
+              git fetch https://gerrit.opencord.org/voltha-system-tests ${volthaSystemTestsChange} && git checkout FETCH_HEAD
+            fi
+            """)
+        }
+      }
+    }
+    stage('Build patch') {
+      when {
+        expression {
+          return params.GERRIT_PROJECT
+        }
+      }
+      steps {
+        sh """
+        git clone https://\$GERRIT_HOST/\$GERRIT_PROJECT
+        cd \$GERRIT_PROJECT
+        git fetch https://\$GERRIT_HOST/\$GERRIT_PROJECT \$GERRIT_REFSPEC && git checkout FETCH_HEAD
+
+        DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-build
+        DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-push
+        """
+      }
+    }
+    stage('Deploy common infrastructure') {
+      // includes monitoring, kafka, etcd
+      steps {
+        sh '''
+        if [ ${withMonitoring} = true ] ; then
+          helm install nem-monitoring cord/nem-monitoring \
+          -f $HOME/voltha-scale/grafana.yaml \
+          --set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \
+          --set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false
+        fi
+
+        # TODO download this file from https://github.com/opencord/helm-charts/blob/master/scripts/wait_for_pods.sh
+        bash /home/cord/voltha-scale/wait_for_pods.sh
+        '''
+      }
+    }
+    stage('Deploy VOLTHA infrastructure') {
+      steps {
+        sh returnStdout: false, script: '''
+          cd $WORKSPACE/kind-voltha/
+
+          # KAFKA config
+          NUM_OF_KAFKA=${kafkaReplicas}
+          EXTRA_HELM_FLAGS+=' --set prometheus.kafka.enabled=true,prometheus.operator.enabled=true,prometheus.jmx.enabled=true,prometheus.operator.serviceMonitor.namespace=default '
+
+          # ETCD config
+          EXTRA_HELM_FLAGS+=" --set memoryMode=${inMemoryEtcdStorage} "
+
+          NAME=infra JUST_INFRA=y ./voltha up
+
+          # Forward the ETCD port onto $VOLTHA_ETCD_PORT
+          _TAG=etcd-port-forward kubectl -n \$INFRA_NS port-forward --address 0.0.0.0 -n default service/etcd $VOLTHA_ETCD_PORT:2379&
+        '''
+      }
+    }
+    stage('Deploy Voltha') {
+      steps {
+        deploy_voltha_stacks(params.volthaStacks)
+      }
+    }
+    stage('Start logging') {
+      steps {
+        sh returnStdout: false, script: '''
+        # start logging with kail
+
+        mkdir -p $LOG_FOLDER
+
+        list=($APPS_TO_LOG)
+        for app in "${list[@]}"
+        do
+          echo "Starting logs for: ${app}"
+          _TAG=kail-$app kail -l app=$app --since 1h > $LOG_FOLDER/$app.log&
+        done
+        '''
+      }
+    }
+    stage('Configuration') {
+      steps {
+        script {
+          sh returnStdout: false, script: """
+          #Setting link discovery
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled ${withLLDP}
+
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager allowExtraneousRules true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager importExtraneousRules true
+
+
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxBatchMillis 1000
+
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxIdleMillis 500
+
+          ONOSES=\$((\$NUM_OF_ONOS - 1))
+          for i in \$(seq 0 \$ONOSES); do
+            INSTANCE="onos-onos-classic-\$i"
+
+            #Setting LOG level to ${logLevel}
+            kubectl -n \$INFRA_NS exec \$INSTANCE -- bash /root/onos/${karafHome}/bin/client log:set ${logLevel} org.onosproject
+            kubectl -n \$INFRA_NS exec \$INSTANCE -- bash /root/onos/${karafHome}/bin/client log:set ${logLevel} org.opencord
+
+            kubectl -n \$INFRA_NS exec \$INSTANCE -- bash /root/onos/${karafHome}/bin/client log:set DEBUG org.opencord.olt
+
+            kubectl -n \$INFRA_NS exec \$INSTANCE -- bash /root/onos/${karafHome}/bin/client log:set TRACE org.onosproject.net.meter.impl
+          done
+
+          # Set Flows/Ports/Meters poll frequency
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.flow.impl.OpenFlowRuleProvider flowPollFrequency ${onosStatInterval}
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.device.impl.OpenFlowDeviceProvider portStatsPollFrequency ${onosStatInterval}
+
+          if [ ${withFlows} = false ]; then
+            sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.opencord.olt
+          fi
+
+          if [ ${withMibTemplate} = true ] ; then
+            rm -f BBSM-12345123451234512345-00000000000001-v1.json
+            wget https://raw.githubusercontent.com/opencord/voltha-openonu-adapter/master/templates/BBSM-12345123451234512345-00000000000001-v1.json
+            cat BBSM-12345123451234512345-00000000000001-v1.json | kubectl -n \$INFRA_NS exec -it \$(kubectl -n \$INFRA_NS get pods -l app=etcd | awk 'NR==2{print \$1}') -- etcdctl put service/voltha/omci_mibs/templates/BBSM/12345123451234512345/00000000000001
+          fi
+
+          if [ ${withPcap} = true ] && [ ${volthaStacks} -eq 1 ] ; then
+            # FIXME ofagent pcap has to be replicated per stack
+            # Start the tcp-dump in ofagent
+            export OF_AGENT=\$(kubectl -n \$INFRA_NS get pods -l app=ofagent -o name)
+            kubectl exec \$OF_AGENT -- apk update
+            kubectl exec \$OF_AGENT -- apk add tcpdump
+            kubectl exec \$OF_AGENT -- mv /usr/sbin/tcpdump /usr/bin/tcpdump
+            _TAG=ofagent-tcpdump kubectl -n \$INFRA_NS exec \$OF_AGENT -- tcpdump -nei eth0 -w out.pcap&
+
+            # Start the tcp-dump in radius
+            export RADIUS=\$(kubectl -n \$INFRA_NS get pods -l app=radius -o name)
+            kubectl exec \$RADIUS -- apt-get update
+            kubectl exec \$RADIUS -- apt-get install -y tcpdump
+            _TAG=radius-tcpdump kubectl -n \$INFRA_NS exec \$RADIUS -- tcpdump -w out.pcap&
+
+            # Start the tcp-dump in ONOS
+            for i in \$(seq 0 \$ONOSES); do
+              INSTANCE="onos-onos-classic-\$i"
+              kubectl exec \$INSTANCE -- apt-get update
+              kubectl exec \$INSTANCE -- apt-get install -y tcpdump
+              kubectl exec \$INSTANCE -- mv /usr/sbin/tcpdump /usr/bin/tcpdump
+              _TAG=\$INSTANCE kubectl -n \$INFRA_NS exec \$INSTANCE -- /usr/bin/tcpdump -nei eth0 port 1812 -w out.pcap&
+            done
+          else
+            echo "PCAP not supported for multiple VOLTHA stacks"
+          fi
+          """
+        }
+      }
+    }
+    stage('Setup Test') {
+      steps {
+        sh '''
+          mkdir -p $WORKSPACE/RobotLogs
+          cd $WORKSPACE/voltha-system-tests
+          make vst_venv
+        '''
+        sh '''
+          if [ ${withProfiling} = true ] ; then
+            mkdir -p $LOG_FOLDER/pprof
+            cat << EOF > $WORKSPACE/pprof.sh
+timestamp() {
+  date +"%T"
+}
+
+i=0
+while [[ true ]]; do
+  ((i++))
+  ts=$(timestamp)
+  go tool pprof -png http://127.0.0.1:6060/debug/pprof/heap > $LOG_FOLDER/pprof/rw-core-heap-\\$i-\\$ts.png
+  go tool pprof -png http://127.0.0.1:6060/debug/pprof/goroutine > $LOG_FOLDER/pprof/rw-core-goroutine-\\$i-\\$ts.png
+  curl -o $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof http://127.0.0.1:6060/debug/pprof/profile?seconds=10
+  go tool pprof -png $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.png
+
+  go tool pprof -png http://127.0.0.1:6061/debug/pprof/heap > $LOG_FOLDER/pprof/openolt-heap-\\$i-\\$ts.png
+  go tool pprof -png http://127.0.0.1:6061/debug/pprof/goroutine > $LOG_FOLDER/pprof/openolt-goroutine-\\$i-\\$ts.png
+  curl -o $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof http://127.0.0.1:6061/debug/pprof/profile?seconds=10
+  go tool pprof -png $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.png
+
+  go tool pprof -png http://127.0.0.1:6062/debug/pprof/heap > $LOG_FOLDER/pprof/ofagent-heap-\\$i-\\$ts.png
+  go tool pprof -png http://127.0.0.1:6062/debug/pprof/goroutine > $LOG_FOLDER/pprof/ofagent-goroutine-\\$i-\\$ts.png
+  curl -o $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof http://127.0.0.1:6062/debug/pprof/profile?seconds=10
+  go tool pprof -png $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.png
+
+  sleep 10
+done
+EOF
+
+            _TAG="pprof"
+            _TAG=$_TAG bash $WORKSPACE/pprof.sh &
+          fi
+        '''
+        // bbsim-sadis server takes a while to cache the subscriber entries
+        // wait for that before starting the tests
+        sleep(60)
+      }
+    }
+    stage('Run Test') {
+      steps {
+        test_voltha_stacks(params.volthaStacks)
+      }
+    }
+  }
+  post {
+    always {
+      // collect result, done in the "post" step so it's executed even in the
+      // event of a timeout in the tests
+      sh '''
+
+        # stop the kail processes
+        list=($APPS_TO_LOG)
+        for app in "${list[@]}"
+        do
+          echo "Stopping logs for: ${app}"
+          _TAG="kail-$app"
+          P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+          if [ -n "$P_IDS" ]; then
+            echo $P_IDS
+            for P_ID in $P_IDS; do
+              kill -9 $P_ID
+            done
+          fi
+        done
+
+        if [ ${withPcap} = true ] ; then
+          # stop ofAgent tcpdump
+          P_ID="\$(ps e -ww -A | grep "_TAG=ofagent-tcpdump" | grep -v grep | awk '{print \$1}')"
+          if [ -n "\$P_ID" ]; then
+            kill -9 \$P_ID
+          fi
+
+          # stop radius tcpdump
+          P_ID="\$(ps e -ww -A | grep "_TAG=radius-tcpdump" | grep -v grep | awk '{print \$1}')"
+          if [ -n "\$P_ID" ]; then
+            kill -9 \$P_ID
+          fi
+
+          # stop onos tcpdump
+          LIMIT=$(($NUM_OF_ONOS - 1))
+          for i in $(seq 0 $LIMIT); do
+            INSTANCE="onos-onos-classic-$i"
+            P_ID="\$(ps e -ww -A | grep "_TAG=$INSTANCE" | grep -v grep | awk '{print \$1}')"
+            if [ -n "\$P_ID" ]; then
+              kill -9 \$P_ID
+            fi
+          done
+
+          # copy the file
+          export OF_AGENT=$(kubectl get pods -l app=ofagent | awk 'NR==2{print $1}') || true
+          kubectl cp $OF_AGENT:out.pcap $LOG_FOLDER/ofagent.pcap || true
+
+          export RADIUS=$(kubectl get pods -l app=radius | awk 'NR==2{print $1}') || true
+          kubectl cp $RADIUS:out.pcap $LOG_FOLDER/radius.pcap || true
+
+          LIMIT=$(($NUM_OF_ONOS - 1))
+          for i in $(seq 0 $LIMIT); do
+            INSTANCE="onos-onos-classic-$i"
+            kubectl cp $INSTANCE:out.pcap $LOG_FOLDER/$INSTANCE.pcap || true
+          done
+        fi
+
+        cd voltha-system-tests
+        source ./vst_venv/bin/activate
+        python tests/scale/collect-result.py -r $WORKSPACE/RobotLogs/output.xml -p $WORKSPACE/plots > $WORKSPACE/execution-time.txt || true
+        cat $WORKSPACE/execution-time.txt
+      '''
+      sh '''
+        if [ ${withProfiling} = true ] ; then
+          _TAG="pprof"
+          P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+          if [ -n "$P_IDS" ]; then
+            echo $P_IDS
+            for P_ID in $P_IDS; do
+              kill -9 $P_ID
+            done
+          fi
+        fi
+      '''
+      plot([
+        csvFileName: 'scale-test.csv',
+        csvSeries: [
+          [file: 'plots/plot-voltha-onus.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-ports.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-openolt-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-auth.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-openolt-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-dhcp.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+        ],
+        group: 'Voltha-Scale-Numbers', numBuilds: '20', style: 'line', title: "Scale Test (OLTs: ${olts}, PONs: ${pons}, ONUs: ${onus})", yaxis: 'Time (s)', useDescr: true
+      ])
+      step([$class: 'RobotPublisher',
+        disableArchiveOutput: false,
+        logFileName: 'RobotLogs/log.html',
+        otherFiles: '',
+        outputFileName: 'RobotLogs/output.xml',
+        outputPath: '.',
+        passThreshold: 100,
+        reportFileName: 'RobotLogs/report.html',
+        unstableThreshold: 0]);
+      // get all the logs from kubernetes PODs
+      sh returnStdout: false, script: '''
+
+        # store information on running charts
+        helm ls > $LOG_FOLDER/helm-list.txt || true
+
+        # store information on the running pods
+        kubectl get pods -o wide > $LOG_FOLDER/pods.txt || true
+        kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-images.txt || true
+        kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-imagesId.txt || true
+
+        # copy the ONOS logs directly from the container to avoid the color codes
+        printf '%s\n' $(kubectl get pods -l app=onos-onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs -I# bash -c "kubectl cp #:${karafHome}/data/log/karaf.log $LOG_FOLDER/#.log" || true
+
+        # get radius logs out of the container
+        kubectl cp $(kubectl get pods -l app=radius --no-headers  | awk '{print $1}'):/var/log/freeradius/radius.log $LOG_FOLDER//radius.log || true
+      '''
+      // dump all the BBSim(s) ONU information
+      sh '''
+      # TODO parametrize for stacks
+      BBSIM_IDS=$(kubectl get pods | grep bbsim | grep -v server | awk '{print $1}')
+      IDS=($BBSIM_IDS)
+
+      for bbsim in "${IDS[@]}"
+      do
+        kubectl exec -t $bbsim -- bbsimctl onu list > $LOG_FOLDER/$bbsim-device-list.txt || true
+        kubectl exec -t $bbsim -- bbsimctl service list > $LOG_FOLDER/$bbsim-service-list.txt || true
+      done
+      '''
+      // get ONOS debug infos
+      sh '''
+
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 apps -a -s > $LOG_FOLDER/onos-apps.txt || true
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 nodes > $LOG_FOLDER/onos-nodes.txt || true
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 masters > $LOG_FOLDER/onos-masters.txt || true
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 roles > $LOG_FOLDER/onos-roles.txt || true
+
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 ports > $LOG_FOLDER/onos-ports-list.txt || true
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 hosts > $LOG_FOLDER/onos-hosts-list.txt || true
+
+        if [ ${withFlows} = true ] ; then
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-olts > $LOG_FOLDER/onos-olt-list.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 flows -s > $LOG_FOLDER/onos-flows-list.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 meters > $LOG_FOLDER/onos-meters-list.txt || true
+        fi
+
+        if [ ${provisionSubscribers} = true ]; then
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-subscribers > $LOG_FOLDER/onos-programmed-subscribers.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-meters > $LOG_FOLDER/onos-programmed-meters.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-bpmeter-mappings > $LOG_FOLDER/onos-bpmeter-mappings.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-failed-subscribers > $LOG_FOLDER/onos-failed-subscribers.txt || true
+        fi
+
+        if [ ${withEapol} = true ] ; then
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-users > $LOG_FOLDER/onos-aaa-users.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-statistics > $LOG_FOLDER/onos-aaa-statistics.txt || true
+        fi
+
+        if [ ${withDhcp} = true ] ; then
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 dhcpl2relay-allocations > $LOG_FOLDER/onos-dhcp-allocations.txt || true
+        fi
+      '''
+      // collect etcd metrics
+      sh '''
+        mkdir -p $WORKSPACE/etcd-metrics
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_keys_total' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-key-count.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=grpc_server_handled_total{grpc_service="etcdserverpb.KV"}' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-rpc-count.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_db_total_size_in_bytes' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-db-size.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data'  > $WORKSPACE/etcd-metrics/etcd-backend-write-time.json || true
+      '''
+      // get VOLTHA debug infos
+      script {
+        try {
+          sh '''
+          # TODO parametrize for multiple stacks
+          voltctl -m 8MB device list -o json > $LOG_FOLDER/device-list.json || true
+          python -m json.tool $LOG_FOLDER/device-list.json > $LOG_FOLDER/voltha-devices-list.json || true
+          rm $LOG_FOLDER/device-list.json || true
+          voltctl -m 8MB device list > $LOG_FOLDER/voltha-devices-list.txt || true
+
+          printf '%s\n' $(voltctl -m 8MB device list | grep olt | awk '{print $1}') | xargs -I# bash -c "voltctl -m 8MB device flows # > $LOG_FOLDER/voltha-device-flows-#.txt" || true
+              printf '%s\n' $(voltctl -m 8MB device list | grep olt | awk '{print $1}') | xargs -I# bash -c "voltctl -m 8MB device port list --format 'table{{.PortNo}}\t{{.Label}}\t{{.Type}}\t{{.AdminState}}\t{{.OperStatus}}' # > $LOG_FOLDER/voltha-device-ports-#.txt" || true
+
+          printf '%s\n' $(voltctl -m 8MB logicaldevice list -q) | xargs -I# bash -c "voltctl -m 8MB logicaldevice flows # > $LOG_FOLDER/voltha-logicaldevice-flows-#.txt" || true
+          printf '%s\n' $(voltctl -m 8MB logicaldevice list -q) | xargs -I# bash -c "voltctl -m 8MB logicaldevice port list # > $LOG_FOLDER/voltha-logicaldevice-ports-#.txt" || true
+          '''
+        } catch(e) {
+          sh '''
+          echo "Can't get device list from voltclt"
+          '''
+        }
+      }
+      // get cpu usage by container
+      sh '''
+      if [ ${withMonitoring} = true ] ; then
+        cd $WORKSPACE/voltha-system-tests
+        source ./vst_venv/bin/activate
+        sleep 60 # we have to wait for prometheus to collect all the information
+        python tests/scale/sizing.py -o $WORKSPACE/plots || true
+      fi
+      '''
+      archiveArtifacts artifacts: 'kind-voltha/install-minimal.log,execution-time.txt,logs/*,logs/pprof/*,RobotLogs/**/*,plots/*,etcd-metrics/*'
+    }
+  }
+}
+
+def deploy_voltha_stacks(numberOfStacks) {
+  for (int i = 1; i <= numberOfStacks.toInteger(); i++) {
+    stage("Deploy VOLTHA stack " + i) {
+      sh returnStdout: false, script: """
+      cd $WORKSPACE/kind-voltha/
+
+      export NAME=voltha${i}
+      export VOLTHA_NS=voltha${i}
+      export ADAPTER_NS=voltha${i}
+      export BBSIM_NS=voltha${i}
+      export BBSIM_BASE_INDEX=${i}
+      export WITH_ETCD=etcd.\$INFRA_NS.svc:2379
+      export WITH_KAFKA=kafka.\$INFRA_NS.svc:9092
+      export WITH_ONOS=onos-onos-classic-hs.\$INFRA_NS.svc:6653
+
+      export EXTRA_HELM_FLAGS+=' '
+
+      # Load the release defaults
+      if [ '${release.trim()}' != 'master' ]; then
+        source $WORKSPACE/kind-voltha/releases/${release}
+        EXTRA_HELM_FLAGS+=" ${extraHelmFlags} "
+      fi
+
+      # BBSim custom image handling
+      if [ '${bbsimImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'bbsim' ]; then
+        IFS=: read -r bbsimRepo bbsimTag <<< '${bbsimImg.trim()}'
+        EXTRA_HELM_FLAGS+="--set images.bbsim.repository=\$bbsimRepo,images.bbsim.tag=\$bbsimTag "
+      fi
+
+      # VOLTHA and ofAgent custom image handling
+      # NOTE to override the rw-core image in a released version you must set the ofAgent image too
+      # TODO split ofAgent and voltha-go
+      if [ '${rwCoreImg.trim()}' != '' ] && [ '${ofAgentImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-go' ]; then
+        IFS=: read -r rwCoreRepo rwCoreTag <<< '${rwCoreImg.trim()}'
+        IFS=: read -r ofAgentRepo ofAgentTag <<< '${ofAgentImg.trim()}'
+        EXTRA_HELM_FLAGS+="--set images.rw_core.repository=\$rwCoreRepo,images.rw_core.tag=\$rwCoreTag,images.ofagent.repository=\$ofAgentRepo,images.ofagent.tag=\$ofAgentTag "
+      fi
+
+      # OpenOLT custom image handling
+      if [ '${openoltAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openolt-adapter' ]; then
+        IFS=: read -r openoltAdapterRepo openoltAdapterTag <<< '${openoltAdapterImg.trim()}'
+        EXTRA_HELM_FLAGS+="--set images.adapter_open_olt.repository=\$openoltAdapterRepo,images.adapter_open_olt.tag=\$openoltAdapterTag "
+      fi
+
+      # OpenONU custom image handling
+      if [ '${openonuAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter' ]; then
+        IFS=: read -r openonuAdapterRepo openonuAdapterTag <<< '${openonuAdapterImg.trim()}'
+        EXTRA_HELM_FLAGS+="--set images.adapter_open_onu.repository=\$openonuAdapterRepo,images.adapter_open_onu.tag=\$openonuAdapterTag "
+      fi
+
+      # ONOS custom image handling
+      if [ '${onosImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-onos' ]; then
+        IFS=: read -r onosRepo onosTag <<< '${onosImg.trim()}'
+        EXTRA_HELM_FLAGS+="--set images.onos.repository=\$onosRepo,images.onos.tag=\$onosTag "
+      fi
+
+      # set BBSim parameters
+      EXTRA_HELM_FLAGS+='--set enablePerf=true,pon=${pons},onu=${onus} '
+
+      # disable the securityContext, this is a development cluster
+      EXTRA_HELM_FLAGS+='--set securityContext.enabled=false '
+
+      # No persistent-volume-claims in Atomix
+      EXTRA_HELM_FLAGS+="--set atomix.persistence.enabled=false "
+
+      echo "Installing with the following extra arguments:"
+      echo $EXTRA_HELM_FLAGS
+
+      # if it's newer than voltha-2.4 set the correct BBSIM_CFG
+      if [ '${release.trim()}' != 'voltha-2.4' ]; then
+        export BBSIM_CFG="$WORKSPACE/kind-voltha/configs/bbsim-sadis-${workflow}.yaml"
+      fi
+
+      # Use custom built images
+
+      if [ '\$GERRIT_PROJECT' == 'voltha-go' ]; then
+        EXTRA_HELM_FLAGS+="--set images.rw_core.repository=${dockerRegistry}/voltha/voltha-rw-core,images.rw_core.tag=voltha-scale "
+      fi
+
+      if [ '\$GERRIT_PROJECT' == 'voltha-openolt-adapter' ]; then
+        EXTRA_HELM_FLAGS+="--set images.adapter_open_olt.repository=${dockerRegistry}/voltha/voltha-openolt-adapter,images.adapter_open_olt.tag=voltha-scale "
+      fi
+
+      if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter' ]; then
+        EXTRA_HELM_FLAGS+="--set images.adapter_open_onu.repository=${dockerRegistry}/voltha/voltha-openonu-adapter,images.adapter_open_onu.tag=voltha-scale "
+      fi
+
+      if [ '\$GERRIT_PROJECT' == 'ofagent-go' ]; then
+        EXTRA_HELM_FLAGS+="--set images.ofagent.repository=${dockerRegistry}/voltha/voltha-ofagent-go,images.ofagent.tag=voltha-scale "
+      fi
+
+      if [ '\$GERRIT_PROJECT' == 'voltha-onos' ]; then
+        EXTRA_HELM_FLAGS+="--set images.onos.repository=${dockerRegistry}/voltha/voltha-onos,images.onos.tag=voltha-scale "
+      fi
+
+      if [ '\$GERRIT_PROJECT' == 'bbsim' ]; then
+        EXTRA_HELM_FLAGS+="--set images.bbsim.repository=${dockerRegistry}/voltha/bbsim,images.bbsim.tag=voltha-scale "
+      fi
+
+      ./voltha up
+      """
+    }
+  }
+}
+
+def test_voltha_stacks(numberOfStacks) {
+  for (int i = 1; i <= numberOfStacks.toInteger(); i++) {
+    stage("Test VOLTHA stack " + i) {
+      timeout(time: 15, unit: 'MINUTES') {
+        sh """
+          export VOLTCONFIG="$HOME/.volt/config-voltha${i}"
+          ROBOT_PARAMS="-v stackId:${i} \
+            -v olt:${olts} \
+            -v pon:${pons} \
+            -v onu:${onus} \
+            -v workflow:${workflow} \
+            -v withEapol:${withEapol} \
+            -v withDhcp:${withDhcp} \
+            -v withIgmp:${withIgmp} \
+            --noncritical non-critical \
+            -e teardown "
+
+          if [ ${withEapol} = false ] ; then
+            ROBOT_PARAMS+="-e authentication "
+          fi
+
+          if [ ${withDhcp} = false ] ; then
+            ROBOT_PARAMS+="-e dhcp "
+          fi
+
+          if [ ${provisionSubscribers} = false ] ; then
+            # if we're not considering subscribers then we don't care about authentication and dhcp
+            ROBOT_PARAMS+="-e authentication -e provision -e flow-after -e dhcp "
+          fi
+
+          if [ ${withFlows} = false ] ; then
+            ROBOT_PARAMS+="-i setup -i activation "
+          fi
+
+          cd $WORKSPACE/voltha-system-tests
+          source ./vst_venv/bin/activate
+          robot -d $WORKSPACE/RobotLogs/voltha${i} \
+          \$ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
+        """
+      }
+    }
+  }
+}
diff --git a/jjb/pipeline/voltha-scale-test.groovy b/jjb/pipeline/voltha-scale-test.groovy
index c4e7a59..b83b3b3 100644
--- a/jjb/pipeline/voltha-scale-test.groovy
+++ b/jjb/pipeline/voltha-scale-test.groovy
@@ -177,14 +177,16 @@
       // includes monitoring, kafka, etcd
       steps {
         sh '''
-        helm install kafka incubator/kafka --set replicas=${kafkaReplicas} --set persistence.enabled=false \
+        helm repo add bitnami https://charts.bitnami.com/bitnami
+        helm install kafka bitnami/kafka --set replicaCount=${kafkaReplicas} --set persistence.enabled=false \
           --set zookeeper.replicaCount=${kafkaReplicas} --set zookeeper.persistence.enabled=false \
           --set prometheus.kafka.enabled=true,prometheus.operator.enabled=true,prometheus.jmx.enabled=true,prometheus.operator.serviceMonitor.namespace=default
 
         # the ETCD chart use "auth" for resons different than BBsim, so strip that away
         ETCD_FLAGS=$(echo ${extraHelmFlags} | sed -e 's/--set auth=false / /g') | sed -e 's/--set auth=true / /g'
+        ETCD_FLAGS+=" --set auth.rbac.enabled=false,persistence.enabled=false,statefulset.replicaCount=${etcdReplicas}"
         ETCD_FLAGS+=" --set memoryMode=${inMemoryEtcdStorage} "
-        helm install -f $WORKSPACE/kind-voltha/values.yaml --set replicas=${etcdReplicas} etcd incubator/etcd $ETCD_FLAGS
+        helm install -f $WORKSPACE/kind-voltha/values.yaml --set replicas=${etcdReplicas} etcd bitnami/etcd $ETCD_FLAGS
 
         if [ ${withMonitoring} = true ] ; then
           helm install nem-monitoring cord/nem-monitoring \
@@ -354,7 +356,7 @@
           if [ ${withMibTemplate} = true ] ; then
             rm -f BBSM-12345123451234512345-00000000000001-v1.json
             wget https://raw.githubusercontent.com/opencord/voltha-openonu-adapter/master/templates/BBSM-12345123451234512345-00000000000001-v1.json
-            cat BBSM-12345123451234512345-00000000000001-v1.json | kubectl exec -it \$(kubectl get pods -l app=etcd | awk 'NR==2{print \$1}') -- etcdctl put service/voltha/omci_mibs/templates/BBSM/12345123451234512345/00000000000001
+            cat BBSM-12345123451234512345-00000000000001-v1.json | kubectl exec -it \$(kubectl get pods |grep etcd | awk 'NR==1{print \$1}') -- etcdctl put service/voltha/omci_mibs/templates/BBSM/12345123451234512345/00000000000001
           fi
 
           if [ ${withPcap} = true ] ; then
diff --git a/jjb/verify/voltha-eponolt-adapter.yaml b/jjb/verify/voltha-eponolt-adapter.yaml
new file mode 100644
index 0000000..8574be8
--- /dev/null
+++ b/jjb/verify/voltha-eponolt-adapter.yaml
@@ -0,0 +1,32 @@
+---
+# verification jobs for 'voltha-eponolt-adapter' repo
+
+- project:
+    name: voltha-eponolt-adapter
+    project: '{name}'
+
+    jobs:
+      - 'verify-voltha-eponolt-adapter-jobs':
+          branch-regexp: '{all-branches-regexp}'
+      - 'publish-voltha-eponolt-adapter-jobs':
+          branch-regexp: '{all-branches-regexp}'
+
+- job-group:
+    name: 'verify-voltha-eponolt-adapter-jobs'
+    jobs:
+      - 'verify-licensed'
+      - 'tag-collision-reject':
+          dependency-jobs: 'verify_voltha-eponolt-adapter_licensed'
+      - 'make-unit-test':
+          dest-gopath: "github.com/opencord"
+          unit-test-targets: 'lint sca test'
+          unit-test-keep-going: 'true'
+
+- job-group:
+    name: 'publish-voltha-eponolt-adapter-jobs'
+    jobs:
+      - 'docker-publish':
+          build-timeout: 30
+          docker-repo: 'voltha'
+          dependency-jobs: 'version-tag'
+          extraEnvironmentVars: BUILD_PROFILED=true
diff --git a/jjb/verify/voltha-openonu-adapter-go.yaml b/jjb/verify/voltha-openonu-adapter-go.yaml
index 00bfd35..c55dabd 100644
--- a/jjb/verify/voltha-openonu-adapter-go.yaml
+++ b/jjb/verify/voltha-openonu-adapter-go.yaml
@@ -16,7 +16,20 @@
     jobs:
       - 'verify-licensed'
       - 'tag-collision-reject'
-      - 'make-unit-test'
+      - 'make-unit-test':
+          dest-gopath: "github.com/opencord"
+          name-extension: "-lint"
+          unit-test-targets: 'lint sca'
+          unit-test-keep-going: 'true'
+          junit-allow-empty-results: true
+          build-node: 'ubuntu16.04-basebuild-2c-4g'
+      - 'make-unit-test':
+          dest-gopath: "github.com/opencord"
+          name-extension: "-tests"
+          unit-test-targets: 'test'
+          unit-test-keep-going: 'true'
+          junit-allow-empty-results: true
+          build-node: 'ubuntu16.04-basebuild-2c-4g'
       - 'voltha-patch-test':
           pipeline-script: 'voltha-openonu-go-tests.groovy'
 
diff --git a/jjb/voltha-scale.yaml b/jjb/voltha-scale.yaml
index adf2758..9e08b81 100644
--- a/jjb/voltha-scale.yaml
+++ b/jjb/voltha-scale.yaml
@@ -27,7 +27,6 @@
           openonuAdapterReplicas: 1
           openonuAdapterImg: voltha/voltha-openonu-adapter-go:master
           extraHelmFlags: '--set use_openonu_adapter_go=true'
-          onosImg: andreacampanella/voltha-onos:olt-meter-removal-master
 
       - 'voltha-scale-measurements':
           name: 'voltha-openonu-go-scale-measurements-master-1-16-32-att-subscribers'
@@ -44,7 +43,6 @@
           withIgmp: false
           openonuAdapterReplicas: 1
           openonuAdapterImg: voltha/voltha-openonu-adapter-go:master
-          onosImg: andreacampanella/voltha-onos:olt-meter-removal-master
           extraHelmFlags: '--set use_openonu_adapter_go=true,authRetry=true,dhcpRetry=true'
 
       # this job will be used to test custom images without disrupting tests on master
@@ -66,6 +64,29 @@
           extraHelmFlags: '--set authRetry=true,dhcpRetry=true'
           withPcap: true
 
+      - 'voltha-scale-measurements':
+          name: 'voltha-scale-measurements-master-experimental-multi-stack'
+          build-node: 'onf-pod1-head-node'
+          pipeline-script: 'voltha-scale-multi-stack.groovy'
+          'disable-job': false
+          # trigger on Feb 29th (a.k.a only trigger it manually)
+          # time-trigger: "H 0 29 2 *"
+          time-trigger: "H H/4 * * *"
+          withMonitoring: false
+          volthaStacks: 2
+          olts: 2
+          pons: 8
+          onus: 16
+          withFlows: true
+          provisionSubscribers: true
+          withEapol: true
+          withDhcp: true
+          withIgmp: false
+          extraHelmFlags: '--set authRetry=true,dhcpRetry=true'
+          withPcap: true
+          volthaSystemTestsChange: refs/changes/27/21627/2
+          kindVolthaChange: refs/changes/85/21485/8
+
 
       # jobs for 512 ONUs with a 8 openonu-adapters and clustered ONOS (1 OLT)
       - 'voltha-scale-measurements':
@@ -82,7 +103,6 @@
           withDhcp: true
           withIgmp: false
           extraHelmFlags: '--set authRetry=true,dhcpRetry=true'
-          onosImg: andreacampanella/voltha-onos:olt-meter-removal-master
 
       - 'voltha-scale-measurements':
           name: 'voltha-scale-measurements-master-1-16-32-tt-subscribers'
@@ -99,7 +119,6 @@
           withDhcp: true
           withIgmp: true
           extraHelmFlags: '--set authRetry=true,dhcpRetry=true'
-          onosImg: andreacampanella/voltha-onos:olt-meter-removal-master
 
       - 'voltha-scale-measurements':
           name: 'voltha-scale-measurements-master-1-16-32-dt-subscribers'
@@ -132,7 +151,6 @@
           withDhcp: true
           withIgmp: false
           extraHelmFlags: '--set authRetry=true,dhcpRetry=true'
-          onosImg: andreacampanella/voltha-onos:olt-meter-removal-master
 
       - 'voltha-scale-measurements':
           name: 'voltha-scale-measurements-master-2-16-32-dt-subscribers'
@@ -149,7 +167,6 @@
           withDhcp: false
           withIgmp: false
           extraHelmFlags: '--set authRetry=true,dhcpRetry=true'
-          onosImg: andreacampanella/voltha-onos:olt-meter-removal-master
 
       - 'voltha-scale-measurements':
           name: 'voltha-scale-measurements-master-2-16-32-tt-subscribers'
@@ -169,7 +186,6 @@
           onosReplicas: 3
           atomixReplicas: 3
           extraHelmFlags: '--set authRetry=true,dhcpRetry=true'
-          onosImg: andreacampanella/voltha-onos:olt-meter-removal-master
 
       # voltha-2.5 Jobs
       - 'voltha-scale-measurements':
@@ -315,6 +331,11 @@
     name: voltha-scale-job-parameters
     parameters:
       - string:
+          name: pipeline-script
+          default: '{pipeline-script}'
+          description: 'The pipeline script to use'
+
+      - string:
           name: release
           default: '{release}'
           description: 'Version of the code to test (matches a branch in kind-voltha and voltha-system-tests repos)'
@@ -335,6 +356,11 @@
           description: 'Log level for all the components'
 
       - string:
+          name: volthaStacks
+          default: '{volthaStacks}'
+          description: 'Number of VOLTHA Stacks to deploy'
+
+      - string:
           name: onus
           default: '{onus}'
           description: 'Number of ONUs to provision'
@@ -527,7 +553,6 @@
 - job-template:
     id: 'voltha-scale-measurements'
     name: '{name}'
-    pipeline-script: 'voltha-scale-test.groovy'
     disabled: '{disable-job}'
 
     description: |
@@ -547,6 +572,7 @@
           jenkins-ssh-credential: '{jenkins-ssh-credential}'
 
     # default values
+    pipeline-script: 'voltha-scale-test.groovy'
     release: master
 
     bbsimImg: voltha/bbsim:master
@@ -563,6 +589,7 @@
     onosChart: onos/onos-classic
     radiusChart: onf/freeradius
 
+    volthaStacks: 1
     olts: 2
     pons: 2
     onus: 2
@@ -628,7 +655,6 @@
 - job-template:
     id: 'voltha-scale-measurements-dev'
     name: '{name}'
-    pipeline-script: 'voltha-scale-test.groovy'
 
     description: |
       <!-- Managed by Jenkins Job Builder -->
@@ -647,6 +673,7 @@
           jenkins-ssh-credential: '{jenkins-ssh-credential}'
 
     # default values
+    pipeline-script: 'voltha-scale-test.groovy'
     release: master
 
     bbsimImg: voltha/bbsim:master
@@ -663,6 +690,7 @@
     onosChart: onos/onos-classic
     radiusChart: onf/freeradius
 
+    volthaStacks: 1
     olts: 2
     pons: 2
     onus: 2