[CORD-3256] Generate TT/TP community test job.

jjb/voltha-test/voltha.yaml
jjb/voltha-test/voltha-nightly-jobs.yaml
----------------------------------------
  - First attempt at cloning a voltha pipeline job from DT to TT.
  - Add a few placeholders for future work to split yaml configs
    into a more modular setup.

Makefile
config.mk
makefiles/lint/groovy.mk
makefiles/lint/yaml.mk
makefiles/virtualenv.mk
------------------------
  - Copy in makefile libraries from repo::voltha-docs.
  - lint/yaml and lint/groovy.

Misc / Fixes
------------
  - Fixed colorization in tree output.
  - Comment out jjb import in requirements.txt, Makefile still configured to use an older version.
  - Move README.md outside jjb/ lf-env scripts blindly grep for error patterns beneath jjb/

Change-Id: I36e304f6ca9d54dc26fa5d36b17373cbb00f5afd
diff --git a/jjb/pipeline/voltha/makefile b/jjb/pipeline/voltha/makefile
new file mode 100644
index 0000000..a3cb9b0
--- /dev/null
+++ b/jjb/pipeline/voltha/makefile
@@ -0,0 +1,14 @@
+# -*- makefile -*-
+
+version += master
+version += voltha-2.11
+version += voltha-2.8
+version += playground
+
+all: $(version)
+
+$(version):
+	mkdir -p $(version)
+	rsync -rv --checksum master/. $@/.
+
+# [EOF]
diff --git a/jjb/pipeline/voltha/playground/bbsim-tests.groovy b/jjb/pipeline/voltha/playground/bbsim-tests.groovy
new file mode 100644
index 0000000..6a2330f
--- /dev/null
+++ b/jjb/pipeline/voltha/playground/bbsim-tests.groovy
@@ -0,0 +1,359 @@
+// Copyright 2021-2023 Open Networking Foundation (ONF) and the ONF Contributors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// voltha-2.x e2e tests for openonu-go
+// uses bbsim to simulate OLT/ONUs
+
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+def clusterName = "kind-ci"
+
+def execute_test(testTarget, workflow, testLogging, teardown, testSpecificHelmFlags = "") {
+    def infraNamespace = "default"
+    def volthaNamespace = "voltha"
+    def logsDir = "$WORKSPACE/${testTarget}"
+
+    stage('IAM')
+    {
+	script
+	{
+	    String iam = [
+		'ci-management',
+		'jjb',
+		'pipeline',
+		'voltha',
+		'master',
+		'bbsim-tests.groovy'
+	    ].join('/')
+            println("** ${iam}: ENTER")
+
+	    String cmd = "which pkill"
+	    def stream = sh(
+		returnStatus:false,
+		returnStdout: true,
+		script: cmd)
+	    println(" ** ${cmd}:\n${stream}")
+	    
+            println("** ${iam}: LEAVE")
+	}
+    }
+
+    stage('Cleanup') {
+	if (teardown) {
+	    timeout(15) {
+		script {
+		    helmTeardown(["default", infraNamespace, volthaNamespace])
+		}
+	    timeout(1) {
+		    sh returnStdout: false, script: '''
+          # remove orphaned port-forward from different namespaces
+          ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
+          '''
+		}
+	    }
+	}
+    }
+
+    stage ('Initialize')
+    {
+	// VOL-4926 - Is voltha-system-tests available ?
+	String cmd = [
+	    'make',
+	    '-C', "$WORKSPACE/voltha-system-tests",
+	    "KAIL_PATH=\"$WORKSPACE/bin\"",
+	    'kail',
+	].join(' ')
+	println(" ** Running: ${cmd}:\n")
+        sh("${cmd}")
+    }
+
+    stage('Deploy common infrastructure') {
+	sh '''
+    helm repo add onf https://charts.opencord.org
+    helm repo update
+    if [ ${withMonitoring} = true ] ; then
+      helm install nem-monitoring onf/nem-monitoring \
+      --set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \
+      --set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false
+    fi
+    '''
+    }
+
+    stage('Deploy Voltha') {
+    if (teardown) {
+      timeout(10) {
+        script {
+
+          sh """
+          mkdir -p ${logsDir}
+          _TAG=kail-startup kail -n ${infraNamespace} -n ${volthaNamespace} > ${logsDir}/onos-voltha-startup-combined.log &
+          """
+
+          // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
+          def localCharts = false
+          if (volthaHelmChartsChange != "" || gerritProject == "voltha-helm-charts") {
+            localCharts = true
+          }
+
+          // NOTE temporary workaround expose ONOS node ports
+          def localHelmFlags = extraHelmFlags.trim() + " --set global.log_level=${logLevel.toUpperCase()} " +
+          " --set onos-classic.onosSshPort=30115 " +
+          " --set onos-classic.onosApiPort=30120 " +
+          " --set onos-classic.onosOfPort=31653 " +
+          " --set onos-classic.individualOpenFlowNodePorts=true " + testSpecificHelmFlags
+
+          if (gerritProject != "") {
+            localHelmFlags = "${localHelmFlags} " + getVolthaImageFlags("${gerritProject}")
+          }
+
+          volthaDeploy([
+            infraNamespace: infraNamespace,
+            volthaNamespace: volthaNamespace,
+            workflow: workflow.toLowerCase(),
+            withMacLearning: enableMacLearning.toBoolean(),
+            extraHelmFlags: localHelmFlags,
+            localCharts: localCharts,
+            bbsimReplica: olts.toInteger(),
+            dockerRegistry: registry,
+            ])
+        }
+
+        // stop logging
+        sh """
+          P_IDS="\$(ps e -ww -A | grep "_TAG=kail-startup" | grep -v grep | awk '{print \$1}')"
+          if [ -n "\$P_IDS" ]; then
+            echo \$P_IDS
+            for P_ID in \$P_IDS; do
+              kill -9 \$P_ID
+            done
+          fi
+          cd ${logsDir}
+          gzip -k onos-voltha-startup-combined.log
+          rm onos-voltha-startup-combined.log
+        """
+      }
+      sh """
+      JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-voltha-api" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
+      JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-infra-etcd" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd 2379:2379; done"&
+      JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-infra-kafka" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
+      bbsimDmiPortFwd=50075
+      for i in {0..${olts.toInteger() - 1}}; do
+        JENKINS_NODE_COOKIE="dontKillMe" _TAG="bbsim\${i}" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/bbsim\${i} \${bbsimDmiPortFwd}:50075; done"&
+        ((bbsimDmiPortFwd++))
+      done
+      if [ ${withMonitoring} = true ] ; then
+        JENKINS_NODE_COOKIE="dontKillMe" _TAG="nem-monitoring-prometheus-server" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n default svc/nem-monitoring-prometheus-server 31301:80; done"&
+      fi
+      ps aux | grep port-forward
+      """
+      // setting ONOS log level
+      script {
+        setOnosLogLevels([
+          onosNamespace: infraNamespace,
+          apps: [
+            'org.opencord.dhcpl2relay',
+            'org.opencord.olt',
+            'org.opencord.aaa',
+            'org.opencord.maclearner',
+            'org.onosproject.net.flowobjective.impl.FlowObjectiveManager',
+            'org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager'
+          ],
+          logLevel: logLevel
+        ])
+      }
+    }
+  }
+
+  stage('Run test ' + testTarget + ' on ' + workflow + ' workFlow') {
+    sh """
+    if [ ${withMonitoring} = true ] ; then
+      mkdir -p "$WORKSPACE/voltha-pods-mem-consumption-${workflow}"
+      cd "$WORKSPACE/voltha-system-tests"
+      make vst_venv
+      source ./vst_venv/bin/activate || true
+      # Collect initial memory consumption
+      python scripts/mem_consumption.py -o $WORKSPACE/voltha-pods-mem-consumption-${workflow} -a 0.0.0.0:31301 -n ${volthaNamespace} || true
+    fi
+    """
+    sh """
+    mkdir -p ${logsDir}
+    export ROBOT_MISC_ARGS="-d ${logsDir} ${params.extraRobotArgs} "
+    ROBOT_MISC_ARGS+="-v ONOS_SSH_PORT:30115 -v ONOS_REST_PORT:30120 -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace} -v container_log_dir:${logsDir} -v logging:${testLogging}"
+    export KVSTOREPREFIX=voltha/voltha_voltha
+
+    make -C "$WORKSPACE/voltha-system-tests" ${testTarget} || true
+    """
+    getPodsInfo("${logsDir}")
+    sh """
+      set +e
+      # collect logs collected in the Robot Framework StartLogging keyword
+      cd ${logsDir}
+      gzip *-combined.log || true
+      rm *-combined.log || true
+    """
+    sh """
+    if [ ${withMonitoring} = true ] ; then
+      cd "$WORKSPACE/voltha-system-tests"
+      source ./vst_venv/bin/activate || true
+      # Collect memory consumption of voltha pods once all the tests are complete
+      python scripts/mem_consumption.py -o $WORKSPACE/voltha-pods-mem-consumption-${workflow} -a 0.0.0.0:31301 -n ${volthaNamespace} || true
+    fi
+    """
+  }
+}
+
+def collectArtifacts(exitStatus) {
+  getPodsInfo("$WORKSPACE/${exitStatus}")
+  sh """
+  kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/${exitStatus}/voltha.log || true
+  """
+  archiveArtifacts artifacts: '**/*.log,**/*.gz,**/*.txt,**/*.html,**/voltha-pods-mem-consumption-att/*,**/voltha-pods-mem-consumption-dt/*,**/voltha-pods-mem-consumption-tt/*'
+  sh '''
+    sync
+    pkill kail || true
+    which voltctl
+    md5sum $(which voltctl)
+  '''
+  step([$class: 'RobotPublisher',
+    disableArchiveOutput: false,
+    logFileName: "**/*/log*.html",
+    otherFiles: '',
+    outputFileName: "**/*/output*.xml",
+    outputPath: '.',
+    passThreshold: 100,
+    reportFileName: "**/*/report*.html",
+    unstableThreshold: 0,
+    onlyCritical: true]);
+}
+
+pipeline {
+
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+    timeout(time: "${timeout}", unit: 'MINUTES')
+  }
+  environment {
+    KUBECONFIG="$HOME/.kube/kind-${clusterName}"
+    VOLTCONFIG="$HOME/.volt/config"
+    PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+    DIAGS_PROFILE="VOLTHA_PROFILE"
+    SSHPASS="karaf"
+  }
+  stages {
+    stage('Download Code') {
+      steps {
+        getVolthaCode([
+          branch: "${branch}",
+          gerritProject: "${gerritProject}",
+          gerritRefspec: "${gerritRefspec}",
+          volthaSystemTestsChange: "${volthaSystemTestsChange}",
+          volthaHelmChartsChange: "${volthaHelmChartsChange}",
+        ])
+      }
+    }
+    stage('Build patch') {
+      // build the patch only if gerritProject is specified
+      when {
+        expression {
+          return !gerritProject.isEmpty()
+        }
+      }
+      steps {
+        // NOTE that the correct patch has already been checked out
+        // during the getVolthaCode step
+        buildVolthaComponent("${gerritProject}")
+      }
+    }
+    stage('Create K8s Cluster') {
+      steps {
+        script {
+          def clusterExists = sh returnStdout: true, script: """
+          kind get clusters | grep ${clusterName} | wc -l
+          """
+          if (clusterExists.trim() == "0") {
+            createKubernetesCluster([nodes: 3, name: clusterName])
+          }
+        }
+      }
+    }
+    stage('Replace voltctl') {
+      // if the project is voltctl override the downloaded one with the built one
+      when {
+        expression {
+          return gerritProject == "voltctl"
+        }
+      }
+      steps{
+        sh """
+        # [TODO] - why is this platform specific (?)
+        # [TODO] - revisit, command alteration has masked an error (see: voltha-2.11).
+        #          find will fail when no filsystem matches are found.
+        #          mv(ls) succeded simply by accident/invoked at a different time.
+        mv `ls $WORKSPACE/voltctl/release/voltctl-*-linux-amd*` $WORKSPACE/bin/voltctl
+        chmod +x $WORKSPACE/bin/voltctl
+        """
+      }
+    }
+    stage('Load image in kind nodes') {
+      when {
+        expression {
+          return !gerritProject.isEmpty()
+        }
+      }
+      steps {
+        loadToKind()
+      }
+    }
+    stage('Parse and execute tests') {
+        steps {
+          script {
+            def tests = readYaml text: testTargets
+
+            for(int i = 0;i<tests.size();i++) {
+              def test = tests[i]
+              def target = test["target"]
+              def workflow = test["workflow"]
+              def flags = test["flags"]
+              def teardown = test["teardown"].toBoolean()
+              def logging = test["logging"].toBoolean()
+              def testLogging = 'False'
+              if (logging) {
+                  testLogging = 'True'
+              }
+              println "Executing test ${target} on workflow ${workflow} with logging ${testLogging} and extra flags ${flags}"
+              execute_test(target, workflow, testLogging, teardown, flags)
+            }
+          }
+        }
+    }
+  }
+  post {
+    aborted {
+      collectArtifacts("aborted")
+    }
+    failure {
+      collectArtifacts("failed")
+    }
+    always {
+      collectArtifacts("always")
+    }
+  }
+}
diff --git a/jjb/pipeline/voltha/playground/device-management-mock-tests.groovy b/jjb/pipeline/voltha/playground/device-management-mock-tests.groovy
new file mode 100644
index 0000000..8362a08
--- /dev/null
+++ b/jjb/pipeline/voltha/playground/device-management-mock-tests.groovy
@@ -0,0 +1,172 @@
+// Copyright 2017-2023 Open Networking Foundation (ONF) and the ONF Contributors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+def localCharts = false
+
+pipeline {
+
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+    timeout(time: 90, unit: 'MINUTES')
+  }
+  environment {
+    KUBECONFIG="$HOME/.kube/kind-config-voltha-minimal"
+    PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+    ROBOT_MISC_ARGS="-d $WORKSPACE/RobotLogs"
+  }
+
+  stages {
+
+    stage('Download Code') {
+      steps {
+        getVolthaCode([
+          branch: "${branch}",
+          gerritProject: "${gerritProject}",
+          gerritRefspec: "${gerritRefspec}",
+          volthaSystemTestsChange: "${volthaSystemTestsChange}",
+          volthaHelmChartsChange: "${volthaHelmChartsChange}",
+        ])
+      }
+    }
+    stage('Build Redfish Importer Image') {
+      steps {
+        sh """
+           make -C $WORKSPACE/device-management/\$1 DOCKER_REPOSITORY=opencord/ DOCKER_TAG=citest docker-build-importer
+           """
+      }
+    }
+    stage('Build demo_test Image') {
+      steps {
+        sh """
+           make -C $WORKSPACE/device-management/\$1/demo_test DOCKER_REPOSITORY=opencord/ DOCKER_TAG=citest docker-build
+           """
+      }
+    }
+    stage('Build mock-redfish-server  Image') {
+      steps {
+        sh """
+           make -C $WORKSPACE/device-management/\$1/mock-redfish-server DOCKER_REPOSITORY=opencord/ DOCKER_TAG=citest docker-build
+           """
+      }
+    }
+    stage('Create K8s Cluster') {
+      steps {
+        createKubernetesCluster([nodes: 3])
+      }
+    }
+    stage('Load image in kind nodes') {
+      steps {
+        loadToKind()
+      }
+    }
+    stage('Deploy Voltha') {
+      steps {
+        script {
+          if (branch != "master" || volthaHelmChartsChange != "") {
+            // if we're using a release or testing changes in the charts, then use the local clone
+            localCharts = true
+          }
+        }
+        volthaDeploy([
+          workflow: "att",
+          extraHelmFlags: extraHelmFlags,
+          dockerRegistry: "mirror.registry.opennetworking.org",
+          localCharts: localCharts,
+        ])
+        // start logging
+        sh """
+        mkdir -p $WORKSPACE/att
+        _TAG=kail-att kail -n infra -n voltha -n default > $WORKSPACE/att/onos-voltha-combined.log &
+        """
+        // forward ONOS and VOLTHA ports
+        sh """
+        _TAG=onos-port-forward kubectl port-forward --address 0.0.0.0 -n infra svc/voltha-infra-onos-classic-hs 8101:8101&
+        _TAG=onos-port-forward kubectl port-forward --address 0.0.0.0 -n infra svc/voltha-infra-onos-classic-hs 8181:8181&
+        _TAG=voltha-port-forward kubectl port-forward --address 0.0.0.0 -n voltha svc/voltha-voltha-api 55555:55555&
+        """
+      }
+    }
+
+    stage('Run E2E Tests') {
+      steps {
+        sh '''
+           mkdir -p $WORKSPACE/RobotLogs
+
+           # tell the kubernetes script to use images tagged citest and pullPolicy:Never
+           sed -i 's/master/citest/g' $WORKSPACE/device-management/kubernetes/deploy*.yaml
+           sed -i 's/imagePullPolicy: Always/imagePullPolicy: Never/g' $WORKSPACE/device-management/kubernetes/deploy*.yaml
+           make -C $WORKSPACE/device-management functional-mock-test || true
+           '''
+      }
+    }
+  }
+
+  post {
+    always {
+      sh '''
+         set +e
+         kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq
+         kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq
+         kubectl get nodes -o wide
+         kubectl get pods -o wide --all-namespaces
+
+         sync
+         pkill kail || true
+
+         ## Pull out errors from log files
+         extract_errors_go() {
+           echo
+           echo "Error summary for $1:"
+           grep $1 $WORKSPACE/att/onos-voltha-combined.log | grep '"level":"error"' | cut -d ' ' -f 2- | jq -r '.msg'
+           echo
+         }
+
+         extract_errors_python() {
+           echo
+           echo "Error summary for $1:"
+           grep $1 $WORKSPACE/att/onos-voltha-combined.log | grep 'ERROR' | cut -d ' ' -f 2-
+           echo
+         }
+
+         extract_errors_go voltha-rw-core > $WORKSPACE/error-report.log
+         extract_errors_go adapter-open-olt >> $WORKSPACE/error-report.log
+         extract_errors_python adapter-open-onu >> $WORKSPACE/error-report.log
+         extract_errors_python voltha-ofagent >> $WORKSPACE/error-report.log
+
+         gzip $WORKSPACE/att/onos-voltha-combined.log
+         '''
+         step([$class: 'RobotPublisher',
+            disableArchiveOutput: false,
+            logFileName: 'RobotLogs/log*.html',
+            otherFiles: '',
+            outputFileName: 'RobotLogs/output*.xml',
+            outputPath: '.',
+            passThreshold: 80,
+            reportFileName: 'RobotLogs/report*.html',
+            unstableThreshold: 0]);
+         archiveArtifacts artifacts: '**/*.log,**/*.gz'
+    }
+  }
+}
diff --git a/jjb/pipeline/voltha/playground/dmi-build-and-test.groovy b/jjb/pipeline/voltha/playground/dmi-build-and-test.groovy
new file mode 100755
index 0000000..6d66a53
--- /dev/null
+++ b/jjb/pipeline/voltha/playground/dmi-build-and-test.groovy
@@ -0,0 +1,355 @@
+#!/usr/bin/env groovy
+// -----------------------------------------------------------------------
+// Copyright 2022-2023 Open Networking Foundation (ONF) and the ONF Contributors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// -----------------------------------------------------------------------
+// Intent: used to deploy VOLTHA and configure ONOS physical PODs
+//
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+// -----------------------------------------------------------------------
+
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+def infraNamespace = "infra"
+def volthaNamespace = "voltha"
+
+def deploy_custom_chart(namespace, name, chart, extraHelmFlags) {
+  sh """
+    helm install --create-namespace --set defaults.image_pullPolicy=Always --namespace ${namespace} ${extraHelmFlags} ${name} ${chart}
+   """
+}
+
+pipeline {
+
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+    timeout(time: 45, unit: 'MINUTES')
+  }
+  environment {
+    PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+    KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
+    VOLTCONFIG="$HOME/.volt/config-minimal"
+    LOG_FOLDER="$WORKSPACE/dmi/"
+    APPS_TO_LOG="${OltDevMgr}"
+  }
+
+  stages{
+    stage('Download Code') {
+      steps {
+        getVolthaCode([
+          branch: "${branch}",
+          volthaSystemTestsChange: "${volthaSystemTestsChange}",
+          volthaHelmChartsChange: "${volthaHelmChartsChange}",
+        ])
+      }
+    }
+    stage ("Parse deployment configuration file") {
+      steps {
+        sh returnStdout: true, script: "rm -rf ${configBaseDir}"
+        sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
+        script {
+          if ( params.workFlow == "DT" ) {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+          }
+          else if ( params.workFlow == "TT" )
+          {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+          }
+          else
+          {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+          }
+        }
+      }
+    }
+    stage('Clean up') {
+      steps {
+        timeout(15) {
+          script {
+            helmTeardown(["default", infraNamespace, volthaNamespace])
+          }
+          timeout(1) {
+            sh returnStdout: false, script: '''
+            # remove orphaned port-forward from different namespaces
+            ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
+            '''
+          }
+        }
+      }
+    }
+    stage('Install Voltha')  {
+      steps {
+        timeout(20) {
+          installVoltctl("${branch}")
+          script {
+            // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
+            def localCharts = false
+            if (volthaHelmChartsChange != "") {
+              localCharts = true
+            }
+
+            // should the config file be suffixed with the workflow? see "deployment_config"
+            def localHelmFlags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml --set global.log_level=${logLevel} "
+
+            if (workFlow.toLowerCase() == "dt") {
+              localHelmFlags += " --set radius.enabled=false "
+            }
+            if (workFlow.toLowerCase() == "tt") {
+              localHelmFlags += " --set radius.enabled=false --set global.incremental_evto_update=true "
+                if (enableMultiUni.toBoolean()) {
+                    localHelmFlags += " --set voltha-adapter-openonu.adapter_open_onu.uni_port_mask=${uniPortMask} "
+                }
+            }
+
+            // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
+            // and to connect the ofagent to all instances of ONOS
+            localHelmFlags = localHelmFlags + " --set onos-classic.onosSshPort=30115 " +
+            "--set onos-classic.onosApiPort=30120 " +
+            "--set onos-classic.onosOfPort=31653 " +
+            "--set onos-classic.individualOpenFlowNodePorts=true " +
+            "--set voltha.onos_classic.replicas=${params.NumOfOnos}"
+
+            if (bbsimReplicas.toInteger() != 0) {
+              localHelmFlags = localHelmFlags + " --set onu=${onuNumber},pon=${ponNumber} "
+            }
+
+            // adding user specified helm flags at the end so they'll have priority over everything else
+            localHelmFlags = localHelmFlags + " ${extraHelmFlags}"
+
+            def numberOfAdaptersToWait = 2
+
+            if(openoltAdapterChart != "onf/voltha-adapter-openolt") {
+              localHelmFlags = localHelmFlags + " --set voltha-adapter-openolt.enabled=false"
+              // We skip waiting for adapters in the volthaDeploy step because it's already waiting for
+              // both of them after the deployment of the custom olt adapter. See line 156.
+              numberOfAdaptersToWait = 0
+            }
+
+            volthaDeploy([
+              workflow: workFlow.toLowerCase(),
+              extraHelmFlags: localHelmFlags,
+              localCharts: localCharts,
+              kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
+              onosReplica: params.NumOfOnos,
+              atomixReplica: params.NumOfAtomix,
+              kafkaReplica: params.NumOfKafka,
+              etcdReplica: params.NumOfEtcd,
+              bbsimReplica: bbsimReplicas.toInteger(),
+              adaptersToWait: numberOfAdaptersToWait,
+              withVolthaInfra: installVolthaInfra.toBoolean(),
+              withVolthaStack: installVolthaStack.toBoolean(),
+              ])
+
+            if(installVolthaStack.toBoolean()) {
+              if(openoltAdapterChart != "onf/voltha-adapter-openolt"){
+                extraHelmFlags = extraHelmFlags + " --set global.log_level=${logLevel}"
+                deploy_custom_chart(volthaNamespace, oltAdapterReleaseName, openoltAdapterChart, extraHelmFlags)
+                waitForAdapters([
+                  adaptersToWait: 2
+                ])
+              }
+            }
+          }
+          sh """
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-api" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG="etcd" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd ${params.VolthaEtcdPort}:2379; done"&
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG="kafka" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
+          ps aux | grep port-forward
+          """
+          getPodsInfo("$WORKSPACE")
+        }
+      }
+    }
+    stage('Deploy Device Manager Interface Chart') {
+      steps {
+        script {
+          deploy_custom_chart('default', 'olt-device-manager', dmiChart, extraHelmFlags)
+        }
+        println "Wait for olt-device-manager to start"
+        sh """
+            set +x
+            devmgr=\$(kubectl get pods -l app.kubernetes.io/name=${params.OltDevMgr} --no-headers | grep "0/" | wc -l)
+            while [[ \$devmgr != 0 ]]; do
+              sleep 5
+              devmgr=\$(kubectl get pods -l app.kubernetes.io/name=${params.OltDevMgr} --no-headers | grep "0/" | wc -l)
+            done
+        """
+        sh """
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG="${params.OltDevMgr}" bash -c "while true; do kubectl port-forward --address 0.0.0.0 svc/${params.OltDevMgr} 50051; done"&
+          ps aux | grep port-forward
+        """
+      }
+    }
+	stage('Start logging')
+	{
+	    steps
+	    {
+		// Install kail
+		sh("""make -C "$WORKSPACE/voltha-system-tests" KAIL_PATH="$WORKSPACE/bin" kail""")
+
+		sh returnStdout: false, script: '''
+          # start logging with kail
+          cd $WORKSPACE
+          mkdir -p $LOG_FOLDER
+          list=($APPS_TO_LOG)
+          for app in "${list[@]}"
+          do
+            echo "Starting logs for: ${app}"
+            _TAG=kail-$app kail -l app.kubernetes.io/name=$app --since 1h > $LOG_FOLDER/$app.log&
+          done
+        '''
+	    }
+	}
+
+	stage('Reinstall OLT software') {
+      steps {
+        script {
+          if ( params.reinstallOlt ) {
+            for(int i=0; i < deployment_config.olts.size(); i++) {
+              sh returnStdout: true, script: """
+              ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+              if [ "${params.inBandManagement}" == "true" ]; then
+                sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
+              fi
+              sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
+              sleep 10
+              """
+              timeout(5) {
+                waitUntil {
+                  olt_sw_present = sh returnStdout: true, script: """
+                  if [[ "${deployment_config.olts[i].oltDebVersion}" == *"asfvolt16"* ]]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asfvolt16 | wc -l'
+                  elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"asgvolt64"* ]]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asgvolt64 | wc -l'
+                  elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"rlt-1600x-w"* ]]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep rlt-1600x-w | wc -l'
+                  elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"rlt-1600g-w"* ]]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep rlt-1600g-w | wc -l'
+                  elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"rlt-3200g-w"* ]]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep rlt-3200g-w | wc -l'
+                  else
+                    echo Unknown Debian package for openolt
+                  fi
+                  if (${deployment_config.olts[i].fortygig}); then
+                    if [[ "${params.inBandManagement}" == "true" ]]; then
+                      ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+                      sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'mkdir -p /opt/openolt/'
+                      sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/watchdog-script/* /opt/openolt/'
+                      sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/bal_cli_appl/example_user_appl /broadcom'
+                      sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp in-band-startup-script/* /etc/init.d/'
+                    fi
+                  fi
+                  """
+                  return olt_sw_present.toInteger() > 0
+                }
+              }
+            }
+          }
+        }
+      }
+    }
+    stage('Restart OLT processes') {
+      steps {
+        script {
+          if ( params.restartOlt ) {
+            //rebooting OLTs
+            for(int i=0; i < deployment_config.olts.size(); i++) {
+              timeout(15) {
+                sh returnStdout: true, script: """
+                ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+                sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; rm -f /var/log/openolt_process_watchdog.log; reboot > /dev/null &' || true
+                """
+              }
+            }
+            sh returnStdout: true, script: """
+            sleep ${params.waitTimerForOltUp}
+            """
+            //Checking dev_management_deamon and openoltprocesses
+            for(int i=0; i < deployment_config.olts.size(); i++) {
+              if ( params.oltAdapterReleaseName != "open-olt" ) {
+                timeout(15) {
+                  waitUntil {
+                    devprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep dev_mgmt_daemon | wc -l'"
+                    return devprocess.toInteger() > 0
+                  }
+                }
+                timeout(15) {
+                  waitUntil {
+                    openoltprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep openolt | wc -l'"
+                    return openoltprocess.toInteger() > 0
+                  }
+                }
+              }
+            }
+          }
+        }
+      }
+    }
+    stage('Run Device Management Interface Tests') {
+      environment {
+        ROBOT_FILE="dmi-hw-management.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs"
+        ROBOT_CONFIG_FILE="$WORKSPACE/voltha-system-tests/tests/data/dmi-components-adtran.yaml"
+      }
+      steps {
+        sh """
+          mkdir -p $ROBOT_LOGS_DIR
+          export ROBOT_MISC_ARGS="--removekeywords wuks -e notreadyDMI -i functionalDMI -d $ROBOT_LOGS_DIR"
+          make -C $WORKSPACE/voltha-system-tests voltha-dmi-test || true
+        """
+      }
+    }
+  }
+
+  post {
+    always {
+      getPodsInfo("$WORKSPACE")
+      sh '''
+      # stop the kail processes
+      list=($APPS_TO_LOG)
+      for app in "${list[@]}"
+      do
+        echo "Stopping logs for: ${app}"
+        _TAG="kail-$app"
+        P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+        if [ -n "$P_IDS" ]; then
+          echo $P_IDS
+          for P_ID in $P_IDS; do
+            kill -9 $P_ID
+          done
+        fi
+      done
+      '''
+      step([$class: 'RobotPublisher',
+        disableArchiveOutput: false,
+        logFileName: 'RobotLogs/log*.html',
+        otherFiles: '',
+        outputFileName: 'RobotLogs/output*.xml',
+        outputPath: '.',
+        passThreshold: 100,
+        reportFileName: 'RobotLogs/report*.html',
+        unstableThreshold: 0,
+        onlyCritical: true]);
+      archiveArtifacts artifacts: '**/*.txt,**/*.gz,*.gz,**/*.log'
+    }
+  }
+}
diff --git a/jjb/pipeline/voltha/playground/physical-build.groovy b/jjb/pipeline/voltha/playground/physical-build.groovy
new file mode 100755
index 0000000..7501144
--- /dev/null
+++ b/jjb/pipeline/voltha/playground/physical-build.groovy
@@ -0,0 +1,412 @@
+// Copyright 2017-2023 Open Networking Foundation (ONF) and the ONF Contributors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// used to deploy VOLTHA and configure ONOS physical PODs
+
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+def infraNamespace = "infra"
+def volthaNamespace = "voltha"
+
+def deploy_custom_oltAdapterChart(namespace, name, chart, extraHelmFlags) {
+  sh """
+    helm install --create-namespace --set defaults.image_pullPolicy=Always --namespace ${namespace} ${extraHelmFlags} ${name} ${chart}
+   """
+}
+
+pipeline {
+
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+    timeout(time: 35, unit: 'MINUTES')
+  }
+  environment {
+    PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+    KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
+  }
+
+  stages{
+    stage('Download Code') {
+      steps {
+        getVolthaCode([
+          branch: "${branch}",
+          volthaSystemTestsChange: "${volthaSystemTestsChange}",
+          volthaHelmChartsChange: "${volthaHelmChartsChange}",
+        ])
+      }
+    }
+    stage ("Parse deployment configuration file") {
+      steps {
+        sh returnStdout: true, script: "rm -rf ${configBaseDir}"
+        sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
+        script {
+          if ( params.workFlow == "DT" ) {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+          }
+          else if ( params.workFlow == "TT" )
+          {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+          }
+          else
+          {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+          }
+        }
+      }
+    }
+    stage('Clean up') {
+      steps {
+        timeout(15) {
+          script {
+            helmTeardown(["default", infraNamespace, volthaNamespace])
+          }
+          timeout(1) {
+            sh returnStdout: false, script: '''
+            # remove orphaned port-forward from different namespaces
+            ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
+            '''
+          }
+        }
+      }
+    }
+    stage('Install Voltha')  {
+      steps {
+        timeout(20) {
+          installVoltctl("${branch}")
+          script {
+            // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
+            def localCharts = false
+            if (volthaHelmChartsChange != "") {
+              localCharts = true
+            }
+
+            // should the config file be suffixed with the workflow? see "deployment_config"
+            def localHelmFlags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml --set global.log_level=${logLevel} "
+
+            if (workFlow.toLowerCase() == "dt") {
+              localHelmFlags += " --set radius.enabled=false "
+            }
+            if (workFlow.toLowerCase() == "tt") {
+              localHelmFlags += " --set radius.enabled=false --set global.incremental_evto_update=true "
+                if (enableMultiUni.toBoolean()) {
+                    localHelmFlags += " --set voltha-adapter-openonu.adapter_open_onu.uni_port_mask=${uniPortMask} "
+                }
+            }
+
+            // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
+            // and to connect the ofagent to all instances of ONOS
+            localHelmFlags = localHelmFlags + " --set onos-classic.onosSshPort=30115 " +
+            "--set onos-classic.onosApiPort=30120 " +
+            "--set onos-classic.onosOfPort=31653 " +
+            "--set onos-classic.individualOpenFlowNodePorts=true " +
+            "--set voltha.onos_classic.replicas=${params.NumOfOnos}"
+
+            if (bbsimReplicas.toInteger() != 0) {
+              localHelmFlags = localHelmFlags + " --set onu=${onuNumber},pon=${ponNumber} "
+            }
+
+            // adding user specified helm flags at the end so they'll have priority over everything else
+            localHelmFlags = localHelmFlags + " ${extraHelmFlags}"
+
+            def numberOfAdaptersToWait = 2
+
+            if(openoltAdapterChart != "onf/voltha-adapter-openolt") {
+              localHelmFlags = localHelmFlags + " --set voltha-adapter-openolt.enabled=false"
+              // We skip waiting for adapters in the volthaDeploy step because it's already waiting for
+              // both of them after the deployment of the custom olt adapter. See line 156.
+              numberOfAdaptersToWait = 0
+            }
+
+            volthaDeploy([
+              workflow: workFlow.toLowerCase(),
+              extraHelmFlags: localHelmFlags,
+              localCharts: localCharts,
+              kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
+              onosReplica: params.NumOfOnos,
+              atomixReplica: params.NumOfAtomix,
+              kafkaReplica: params.NumOfKafka,
+              etcdReplica: params.NumOfEtcd,
+              bbsimReplica: bbsimReplicas.toInteger(),
+              withFttb: withFttb.toBoolean(),
+              adaptersToWait: numberOfAdaptersToWait,
+              ])
+
+            if(openoltAdapterChart != "onf/voltha-adapter-openolt"){
+              extraHelmFlags = extraHelmFlags + " --set global.log_level=${logLevel}"
+              deploy_custom_oltAdapterChart(volthaNamespace, oltAdapterReleaseName, openoltAdapterChart, extraHelmFlags)
+              waitForAdapters([
+                adaptersToWait: 2
+              ])
+            }
+          }
+          sh """
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-api" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG="etcd" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd ${params.VolthaEtcdPort}:2379; done"&
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG="kafka" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
+          ps aux | grep port-forward
+          """
+          getPodsInfo("$WORKSPACE")
+        }
+      }
+    }
+    stage('Push Tech-Profile') {
+      steps {
+        script {
+          if ( params.configurePod && params.profile != "Default" ) {
+            for(int i=0; i < deployment_config.olts.size(); i++) {
+              def tech_prof_directory = "XGS-PON"
+              if (deployment_config.olts[i].containsKey("board_technology")){
+                tech_prof_directory = deployment_config.olts[i]["board_technology"]
+              }
+              timeout(1) {
+                sh returnStatus: true, script: """
+                export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+                etcd_container=\$(kubectl get pods -n ${infraNamespace} -l app.kubernetes.io/name=etcd --no-headers | awk 'NR==1{print \$1}')
+                if [[ "${workFlow}" == "TT" ]]; then
+                   kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json
+                   kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
+                   kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json
+                   kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65'
+                   if [[ "${params.enableMultiUni}" == "true" ]]; then
+                      kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-MCAST-AdditionalBW-None.json \$etcd_container:/tmp/mcast_additionalBW_none.json
+                      kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_none.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66'
+                      kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-multi-uni-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast_additionalBW_na.json
+                      kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_na.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/67'
+                   else
+                      kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-None.json \$etcd_container:/tmp/mcast_additionalBW_none.json
+                      kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_none.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66'
+                      kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast_additionalBW_na.json
+                      kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_na.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/67'
+                   fi
+                else
+                   kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json \$etcd_container:/tmp/flexpod.json
+                   kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
+                fi
+                """
+              }
+              timeout(1) {
+                sh returnStatus: true, script: """
+                export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+                etcd_container=\$(kubectl get pods -n ${infraNamespace} -l app.kubernetes.io/name=etcd --no-headers | awk 'NR==1{print \$1}')
+                kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/technology_profiles/${tech_prof_directory}/64'
+                """
+              }
+            }
+          }
+        }
+      }
+    }
+    stage('Push MIB templates') {
+      steps {
+        sh """
+        export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+        etcd_container=\$(kubectl get pods -n ${infraNamespace} -l app.kubernetes.io/name=etcd --no-headers | awk 'NR==1{print \$1}')
+        kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Alpha.json \$etcd_container:/tmp/MIB_Alpha.json
+        kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
+        kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
+        kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Scom.json \$etcd_container:/tmp/MIB_Scom.json
+        kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/SCOM/Glasfaser-Modem/090140.1.0.304'
+        kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/SCOM/Glasfaser-Modem/090140.1.0.304'
+        """
+      }
+    }
+    stage('Push Sadis-config') {
+      steps {
+        timeout(1) {
+          sh returnStatus: true, script: """
+          if [[ "${workFlow}" == "DT" ]]; then
+            curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json
+          elif [[ "${workFlow}" == "TT" ]]; then
+            curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json
+          else
+            # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file
+            curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
+          fi
+          """
+        }
+      }
+    }
+    stage('Switch Configurations in ONOS') {
+      steps {
+        script {
+          if ( deployment_config.fabric_switches.size() > 0 ) {
+            timeout(1) {
+              def netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch.json"
+              if (params.inBandManagement){
+                netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch-inband.json"
+              }
+              sh """
+              curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @${netcfg}
+              curl -sSL --user karaf:karaf -X POST http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting/active
+              """
+            }
+            timeout(3) {
+              setOnosLogLevels([
+                  onosNamespace: infraNamespace,
+                  apps: [
+                    'org.opencord.dhcpl2relay',
+                    'org.opencord.olt',
+                    'org.opencord.aaa',
+                    'org.opencord.maclearner',
+                    'org.onosproject.net.flowobjective.impl.FlowObjectiveManager',
+                    'org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager'
+                  ]
+              ])
+              waitUntil {
+                sr_active_out = sh returnStatus: true, script: """
+                curl -sSL --user karaf:karaf -X GET http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting | jq '.state' | grep ACTIVE
+                sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled false"
+                sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.flow.impl.FlowRuleManager purgeOnDisconnection false"
+                sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.meter.impl.MeterManager purgeOnDisconnection false"
+                """
+                return sr_active_out == 0
+              }
+            }
+            timeout(8) {
+              for(int i=0; i < deployment_config.hosts.src.size(); i++) {
+                for(int j=0; j < deployment_config.olts.size(); j++) {
+                  def aggPort = -1
+                  if(deployment_config.olts[j].serial == deployment_config.hosts.src[i].olt){
+                      aggPort = deployment_config.olts[j].aggPort
+                      if(aggPort == -1){
+                        throw new Exception("Upstream port for the olt is not configured, field aggPort is empty")
+                      }
+                      sh """
+                      sleep 10 # NOTE why are we sleeping?
+                      curl -X POST --user karaf:karaf --header 'Content-Type: application/json' --header 'Accept: application/json' -d '{"deviceId": "${deployment_config.fabric_switches[0].device_id}", "vlanId": "${deployment_config.hosts.src[i].s_tag}", "endpoints": [${deployment_config.fabric_switches[0].bngPort},${aggPort}]}' 'http://${deployment_config.nodes[0].ip}:30120/onos/segmentrouting/xconnect'
+                      """
+                  }
+                }
+              }
+            }
+          }
+        }
+      }
+    }
+    stage('Reinstall OLT software') {
+      steps {
+        script {
+          if ( params.reinstallOlt ) {
+            for(int i=0; i < deployment_config.olts.size(); i++) {
+              // NOTE what is oltDebVersion23? is that for VOLTHA-2.3? do we still need this differentiation?
+              sh returnStdout: true, script: """
+              ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+              if [ "${params.inBandManagement}" == "true" ]; then
+                sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
+              fi
+              sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
+              sleep 10
+              """
+              timeout(5) {
+                waitUntil {
+                  olt_sw_present = sh returnStdout: true, script: """
+                  if [[ "${deployment_config.olts[i].oltDebVersion}" == *"asfvolt16"* ]]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asfvolt16 | wc -l'
+                  elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"asgvolt64"* ]]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asgvolt64 | wc -l'
+                  elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"rlt-1600x-w"* ]]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep rlt-1600x-w | wc -l'
+                  elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"rlt-1600g-w"* ]]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep rlt-1600g-w | wc -l'
+                  elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"rlt-3200g-w"* ]]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep rlt-3200g-w | wc -l'
+                  elif [[ "${deployment_config.olts[i].oltDebVersion}" == *"sda3016ss"* ]]; then
+                    sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep sda3016ss | wc -l'
+                  else
+                    echo Unknown Debian package for openolt
+                  fi
+                  if (${deployment_config.olts[i].fortygig}); then
+                    if [[ "${params.inBandManagement}" == "true" ]]; then
+                      ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+                      sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'mkdir -p /opt/openolt/'
+                      sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/watchdog-script/* /opt/openolt/'
+                      sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/bal_cli_appl/example_user_appl /broadcom'
+                      sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp in-band-startup-script/* /etc/init.d/'
+                    fi
+                  fi
+                  """
+                  return olt_sw_present.toInteger() > 0
+                }
+              }
+            }
+          }
+        }
+      }
+    }
+    stage('Restart OLT processes') {
+      steps {
+        script {
+          //rebooting OLTs
+          for(int i=0; i < deployment_config.olts.size(); i++) {
+            timeout(15) {
+              sh returnStdout: true, script: """
+              ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+              sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; rm -f /var/log/openolt_process_watchdog.log; reboot > /dev/null &' || true
+              """
+            }
+          }
+          sh returnStdout: true, script: """
+          sleep ${params.waitTimerForOltUp}
+          """
+          //Checking dev_management_deamon and openoltprocesses
+          for(int i=0; i < deployment_config.olts.size(); i++) {
+            if ( params.oltAdapterReleaseName != "open-olt" ) {
+              timeout(15) {
+                waitUntil {
+                  devprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep dev_mgmt_daemon | wc -l'"
+                  return devprocess.toInteger() > 0
+                }
+              }
+              timeout(15) {
+                waitUntil {
+                  openoltprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep openolt | wc -l'"
+                  return openoltprocess.toInteger() > 0
+                }
+              }
+            }
+          }
+        }
+      }
+    }
+  }
+
+  post {
+    aborted {
+      getPodsInfo("$WORKSPACE/failed")
+      sh """
+      kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/failed/voltha.log || true
+      """
+      archiveArtifacts artifacts: '**/*.log,**/*.txt'
+    }
+    failure {
+      getPodsInfo("$WORKSPACE/failed")
+      sh """
+      kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/failed/voltha.logs || true
+      """
+      archiveArtifacts artifacts: '**/*.log,**/*.txt'
+    }
+    always {
+      archiveArtifacts artifacts: '*.txt'
+    }
+  }
+}
diff --git a/jjb/pipeline/voltha/playground/software-upgrades.groovy b/jjb/pipeline/voltha/playground/software-upgrades.groovy
new file mode 100755
index 0000000..1238a53
--- /dev/null
+++ b/jjb/pipeline/voltha/playground/software-upgrades.groovy
@@ -0,0 +1,308 @@
+// Copyright 2021-2023 Open Networking Foundation (ONF) and the ONF Contributors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// voltha-2.x e2e tests
+// uses bbsim to simulate OLT/ONUs
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+// fetches the versions/tags of the voltha component
+// returns the deployment version which is one less than the latest available tag of the repo, first voltha stack gets deployed using this;
+// returns the test version which is the latest tag of the repo, the component upgrade gets tested on this.
+// Note: if there is a major version change between deployment and test tags, then deployment tag will be same as test tag, i.e. both as latest.
+def get_voltha_comp_versions(component, base_deploy_tag) {
+    def comp_test_tag = sh (
+      script: "git ls-remote --refs --tags https://github.com/opencord/${component} | cut --delimiter='/' --fields=3 | tr '-' '~' | sort --version-sort | tail --lines=1 | sed 's/v//'",
+      returnStdout: true
+    ).trim()
+    def comp_deploy_tag = sh (
+      script: "git ls-remote --refs --tags https://github.com/opencord/${component} | cut --delimiter='/' --fields=3 | tr '-' '~' | sort --version-sort | tail --lines=2 | head -n 1 | sed 's/v//'",
+      returnStdout: true
+    ).trim()
+    def comp_deploy_major = comp_deploy_tag.substring(0, comp_deploy_tag.indexOf('.'))
+    def comp_test_major = comp_test_tag.substring(0, comp_test_tag.indexOf('.'))
+    if ( "${comp_deploy_major.trim()}" != "${comp_test_major.trim()}") {
+      comp_deploy_tag = comp_test_tag
+    }
+    if ( "${comp_test_tag.trim()}" == "${base_deploy_tag.trim()}") {
+      comp_deploy_tag = comp_test_tag
+      comp_test_tag = "master"
+    }
+    println "${component}: deploy_tag: ${comp_deploy_tag}, test_tag: ${comp_test_tag}"
+    return [comp_deploy_tag, comp_test_tag]
+}
+
+def test_software_upgrade(name) {
+  def infraNamespace = "infra"
+  def volthaNamespace = "voltha"
+  def openolt_adapter_deploy_tag = ""
+  def openolt_adapter_test_tag = ""
+  def openonu_adapter_deploy_tag = ""
+  def openonu_adapter_test_tag = ""
+  def rw_core_deploy_tag = ""
+  def rw_core_test_tag = ""
+  def ofagent_deploy_tag = ""
+  def ofagent_test_tag = ""
+  def logsDir = "$WORKSPACE/${name}"
+  stage('Deploy Voltha - '+ name) {
+    timeout(10) {
+      // start logging
+      sh """
+      rm -rf ${logsDir} || true
+      mkdir -p ${logsDir}
+      _TAG=kail-${name} kail -n ${infraNamespace} -n ${volthaNamespace} > ${logsDir}/onos-voltha-startup-combined.log &
+      """
+      def extraHelmFlags = extraHelmFlags.trim()
+      if ("${name}" == "onos-app-upgrade" || "${name}" == "onu-software-upgrade" || "${name}" == "onu-software-upgrade-omci-extended-msg" || "${name}" == "voltha-component-upgrade" || "${name}" == "voltha-component-rolling-upgrade") {
+          extraHelmFlags = " --set global.log_level=${logLevel.toUpperCase()},onu=1,pon=1 --set onos-classic.replicas=3,onos-classic.atomix.replicas=3 " + extraHelmFlags
+      }
+      if ("${name}" == "onu-software-upgrade" || "${name}" == "onu-software-upgrade-omci-extended-msg") {
+          extraHelmFlags = " --set global.extended_omci_support.enabled=true " + extraHelmFlags
+      }
+      if ("${name}" == "onu-software-upgrade-omci-extended-msg") {
+          extraHelmFlags = " --set omccVersion=180 " + extraHelmFlags
+      }
+      if ("${name}" == "onu-image-dwl-simultaneously") {
+          extraHelmFlags = " --set global.log_level=${logLevel.toUpperCase()},onu=2,pon=2 --set onos-classic.replicas=3,onos-classic.atomix.replicas=3 " + extraHelmFlags
+      }
+      if ("${name}" == "onos-app-upgrade" || "${name}" == "onu-software-upgrade" || "${name}" == "onu-software-upgrade-omci-extended-msg" || "${name}" == "onu-image-dwl-simultaneously") {
+          extraHelmFlags = " --set global.image_tag=master --set onos-classic.image.tag=master " + extraHelmFlags
+      }
+      if ("${name}" == "voltha-component-upgrade" || "${name}" == "voltha-component-rolling-upgrade") {
+          extraHelmFlags = " --set images.onos_config_loader.tag=master-onos-config-loader --set onos-classic.image.tag=master " + extraHelmFlags
+      }
+      extraHelmFlags = extraHelmFlags + " --set onos-classic.onosSshPort=30115 --set onos-classic.onosApiPort=30120 "
+      extraHelmFlags = extraHelmFlags + " --set voltha.onos_classic.replicas=3"
+      //ONOS custom image handling
+      if ( onosImg.trim() != '' ) {
+         String[] split;
+         onosImg = onosImg.trim()
+         split = onosImg.split(':')
+        extraHelmFlags = extraHelmFlags + " --set onos-classic.image.repository=" + split[0] +",onos-classic.image.tag=" + split[1] + " "
+      }
+      Integer olts = 1
+      if ("${name}" == "onu-image-dwl-simultaneously") {
+          olts = 2
+      }
+      if ("${name}" == "voltha-component-upgrade" || "${name}" == "voltha-component-rolling-upgrade") {
+        // fetch voltha components versions/tags
+        (openolt_adapter_deploy_tag, openolt_adapter_test_tag) = get_voltha_comp_versions("voltha-openolt-adapter", openoltAdapterDeployBaseTag.trim())
+        extraHelmFlags = extraHelmFlags + " --set voltha-adapter-openolt.images.adapter_open_olt.tag=${openolt_adapter_deploy_tag} "
+        (openonu_adapter_deploy_tag, openonu_adapter_test_tag) = get_voltha_comp_versions("voltha-openonu-adapter-go", openonuAdapterDeployBaseTag.trim())
+        extraHelmFlags = extraHelmFlags + " --set voltha-adapter-openonu.images.adapter_open_onu_go.tag=${openonu_adapter_deploy_tag} "
+        (rw_core_deploy_tag, rw_core_test_tag) = get_voltha_comp_versions("voltha-go", rwCoreDeployBaseTag.trim())
+        extraHelmFlags = extraHelmFlags + " --set voltha.images.rw_core.tag=${rw_core_deploy_tag} "
+        (ofagent_deploy_tag, ofagent_test_tag) = get_voltha_comp_versions("ofagent-go", ofagentDeployBaseTag.trim())
+        extraHelmFlags = extraHelmFlags + " --set voltha.images.ofagent.tag=${ofagent_deploy_tag} "
+      }
+      def localCharts = false
+      // Currently only testing with ATT workflow
+      // TODO: Support for other workflows
+      volthaDeploy([bbsimReplica: olts.toInteger(), workflow: "att", extraHelmFlags: extraHelmFlags, localCharts: localCharts])
+      // stop logging
+      sh """
+        P_IDS="\$(ps e -ww -A | grep "_TAG=kail-${name}" | grep -v grep | awk '{print \$1}')"
+        if [ -n "\$P_IDS" ]; then
+          echo \$P_IDS
+          for P_ID in \$P_IDS; do
+            kill -9 \$P_ID
+          done
+        fi
+        cd ${logsDir}
+        gzip -k onos-voltha-startup-combined.log
+        rm onos-voltha-startup-combined.log
+      """
+      // forward ONOS and VOLTHA ports
+      sh """
+      JENKINS_NODE_COOKIE="dontKillMe" _TAG=onos-port-forward /bin/bash -c "while true; do kubectl -n infra port-forward --address 0.0.0.0 service/voltha-infra-onos-classic-hs 8101:8101; done 2>&1 " &
+      JENKINS_NODE_COOKIE="dontKillMe" _TAG=onos-port-forward /bin/bash -c "while true; do kubectl -n infra port-forward --address 0.0.0.0 service/voltha-infra-onos-classic-hs 8181:8181; done 2>&1 " &
+      JENKINS_NODE_COOKIE="dontKillMe" _TAG=port-forward-voltha-api /bin/bash -c "while true; do kubectl -n voltha port-forward --address 0.0.0.0 service/voltha-voltha-api 55555:55555; done 2>&1 " &
+      """
+      sh """
+      sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 log:set DEBUG org.opencord
+      """
+    }
+  }
+  stage('Test - '+ name) {
+    timeout(75) {
+      sh """
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/${name}"
+        mkdir -p \$ROBOT_LOGS_DIR
+        if [[ ${name} == 'onos-app-upgrade' ]]; then
+          export ONOS_APPS_UNDER_TEST+=''
+          if [ ${aaaVer.trim()} != '' ] && [ ${aaaOarUrl.trim()} != '' ]; then
+            ONOS_APPS_UNDER_TEST+="org.opencord.aaa,${aaaVer.trim()},${aaaOarUrl.trim()}*"
+          fi
+          if [ ${oltVer.trim()} != '' ] && [ ${oltOarUrl.trim()} != '' ]; then
+            ONOS_APPS_UNDER_TEST+="org.opencord.olt,${oltVer.trim()},${oltOarUrl.trim()}*"
+          fi
+          if [ ${dhcpl2relayVer.trim()} != '' ] && [ ${dhcpl2relayOarUrl.trim()} != '' ]; then
+            ONOS_APPS_UNDER_TEST+="org.opencord.dhcpl2relay,${dhcpl2relayVer.trim()},${dhcpl2relayOarUrl.trim()}*"
+          fi
+          if [ ${igmpproxyVer.trim()} != '' ] && [ ${igmpproxyOarUrl.trim()} != '' ]; then
+            ONOS_APPS_UNDER_TEST+="org.opencord.igmpproxy,${igmpproxyVer.trim()},${igmpproxyOarUrl.trim()}*"
+          fi
+          if [ ${sadisVer.trim()} != '' ] && [ ${sadisOarUrl.trim()} != '' ]; then
+            ONOS_APPS_UNDER_TEST+="org.opencord.sadis,${sadisVer.trim()},${sadisOarUrl.trim()}*"
+          fi
+          if [ ${mcastVer.trim()} != '' ] && [ ${mcastOarUrl.trim()} != '' ]; then
+            ONOS_APPS_UNDER_TEST+="org.opencord.mcast,${mcastVer.trim()},${mcastOarUrl.trim()}*"
+          fi
+          if [ ${kafkaVer.trim()} != '' ] && [ ${kafkaOarUrl.trim()} != '' ]; then
+            ONOS_APPS_UNDER_TEST+="org.opencord.kafka,${kafkaVer.trim()},${kafkaOarUrl.trim()}*"
+          fi
+          export ROBOT_MISC_ARGS="-d \$ROBOT_LOGS_DIR -v onos_apps_under_test:\$ONOS_APPS_UNDER_TEST -e PowerSwitch"
+          export TARGET=onos-app-upgrade-test
+        fi
+        if [ ${name} == 'voltha-component-upgrade' ] || [ ${name} == 'voltha-component-rolling-upgrade' ]; then
+          export VOLTHA_COMPS_UNDER_TEST+=''
+          VOLTHA_COMPS_UNDER_TEST+="adapter-open-olt,adapter-open-olt,voltha/voltha-openolt-adapter:${openolt_adapter_test_tag}*"
+          VOLTHA_COMPS_UNDER_TEST+="adapter-open-onu,adapter-open-onu,voltha/voltha-openonu-adapter-go:${openonu_adapter_test_tag}*"
+          VOLTHA_COMPS_UNDER_TEST+="rw-core,voltha,voltha/voltha-rw-core:${rw_core_test_tag}*"
+          VOLTHA_COMPS_UNDER_TEST+="ofagent,ofagent,voltha/voltha-ofagent-go:${ofagent_test_tag}*"
+          export ROBOT_MISC_ARGS="-d \$ROBOT_LOGS_DIR -v voltha_comps_under_test:\$VOLTHA_COMPS_UNDER_TEST -e PowerSwitch"
+        fi
+        if [[ ${name} == 'voltha-component-upgrade' ]]; then
+          export TARGET=voltha-comp-upgrade-test
+        fi
+        if [[ ${name} == 'voltha-component-rolling-upgrade' ]]; then
+          export TARGET=voltha-comp-rolling-upgrade-test
+        fi
+        if [ ${name} == 'onu-software-upgrade' ] || [ ${name} == 'onu-software-upgrade-omci-extended-msg' ]; then
+          export ROBOT_MISC_ARGS="-d \$ROBOT_LOGS_DIR -v image_version:${onuImageVersion.trim()} -v image_url:${onuImageUrl.trim()} -v image_vendor:${onuImageVendor.trim()} -v image_activate_on_success:${onuImageActivateOnSuccess.trim()} -v image_commit_on_success:${onuImageCommitOnSuccess.trim()} -v image_crc:${onuImageCrc.trim()} -e PowerSwitch"
+          export TARGET=onu-upgrade-test
+        fi
+        if [[ ${name} == 'onu-image-dwl-simultaneously' ]]; then
+          export ROBOT_MISC_ARGS="-d \$ROBOT_LOGS_DIR -v image_version:${onuImageVersion.trim()} -v image_url:${onuImageUrl.trim()} -v image_vendor:${onuImageVendor.trim()} -v image_activate_on_success:${onuImageActivateOnSuccess.trim()} -v image_commit_on_success:${onuImageCommitOnSuccess.trim()} -v image_crc:${onuImageCrc.trim()} -e PowerSwitch"
+          export TARGET=onu-upgrade-test-multiolt-kind-att
+        fi
+        testLogging='False'
+        if [ ${logging} = true ]; then
+          testLogging='True'
+        fi
+        export VOLTCONFIG=$HOME/.volt/config-minimal
+        export KUBECONFIG=$HOME/.kube/kind-config-voltha-minimal
+        ROBOT_MISC_ARGS+=" -v ONOS_SSH_PORT:30115 -v ONOS_REST_PORT:30120 -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace} -v container_log_dir:${logsDir} -v logging:\$testLogging"
+        # Run the specified tests
+        make -C $WORKSPACE/voltha-system-tests \$TARGET || true
+      """
+      // remove port-forwarding
+      sh """
+        # remove orphaned port-forward from different namespaces
+        ps aux | grep port-forw | grep -v grep | awk '{print \$2}' | xargs --no-run-if-empty kill -9 || true
+      """
+      // collect pod details
+      get_pods_info("$WORKSPACE/${name}")
+      sh """
+        set +e
+        # collect logs collected in the Robot Framework StartLogging keyword
+        cd ${logsDir}
+        gzip *-combined.log || true
+        rm *-combined.log || true
+      """
+      helmTeardown(['infra', 'voltha'])
+    }
+  }
+}
+def get_pods_info(dest) {
+  // collect pod details, this is here in case of failure
+  sh """
+  mkdir -p ${dest} || true
+  kubectl get pods --all-namespaces -o wide > ${dest}/pods.txt || true
+  kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq | tee ${dest}/pod-images.txt || true
+  kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq | tee ${dest}/pod-imagesId.txt || true
+  kubectl describe pods --all-namespaces -l app.kubernetes.io/part-of=voltha > ${dest}/voltha-pods-describe.txt
+  kubectl describe pods -n infra -l app=onos-classic > ${dest}/onos-pods-describe.txt
+  helm ls --all-namespaces > ${dest}/helm-charts.txt
+  """
+  sh '''
+  # copy the ONOS logs directly from the container to avoid the color codes
+  printf '%s\\n' $(kubectl get pods -n infra -l app=onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs --no-run-if-empty -I# bash -c 'kubectl -n infra cp #:apache-karaf-4.2.14/data/log/karaf.log ''' + dest + '''/#.log' || true
+  '''
+}
+pipeline {
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+    timeout(time: 220, unit: 'MINUTES')
+  }
+  environment {
+    PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+    KUBECONFIG="$HOME/.kube/kind-config-voltha-minimal"
+    SSHPASS="karaf"
+  }
+  stages{
+    stage('Download Code') {
+      steps {
+        getVolthaCode([
+          branch: "${branch}",
+          volthaSystemTestsChange: "${volthaSystemTestsChange}",
+          volthaHelmChartsChange: "${volthaHelmChartsChange}",
+        ])
+      }
+    }
+    stage('Cleanup') {
+      steps {
+        // remove port-forwarding
+        sh """
+          # remove orphaned port-forward from different namespaces
+          ps aux | grep port-forw | grep -v grep | awk '{print \$2}' | xargs --no-run-if-empty kill -9 || true
+        """
+        helmTeardown(['infra', 'voltha'])
+      }
+    }
+    stage('Create K8s Cluster') {
+      steps {
+        createKubernetesCluster([nodes: 3])
+      }
+    }
+    stage('Run Test') {
+      steps {
+        test_software_upgrade("onos-app-upgrade")
+        test_software_upgrade("voltha-component-upgrade")
+        test_software_upgrade("voltha-component-rolling-upgrade")
+        test_software_upgrade("onu-software-upgrade")
+        test_software_upgrade("onu-software-upgrade-omci-extended-msg")
+        test_software_upgrade("onu-image-dwl-simultaneously")
+      }
+    }
+  }
+  post {
+    aborted {
+      get_pods_info("$WORKSPACE/failed")
+    }
+    failure {
+      get_pods_info("$WORKSPACE/failed")
+    }
+    always {
+      step([$class: 'RobotPublisher',
+         disableArchiveOutput: false,
+         logFileName: 'RobotLogs/*/log*.html',
+         otherFiles: '',
+         outputFileName: 'RobotLogs/*/output*.xml',
+         outputPath: '.',
+         passThreshold: 100,
+         reportFileName: 'RobotLogs/*/report*.html',
+         unstableThreshold: 0,
+         onlyCritical: true]);
+      archiveArtifacts artifacts: '*.log,**/*.log,**/*.gz,*.gz,*.txt,**/*.txt'
+    }
+  }
+}
diff --git a/jjb/pipeline/voltha/playground/tucson-build-and-test.groovy b/jjb/pipeline/voltha/playground/tucson-build-and-test.groovy
new file mode 100644
index 0000000..81b26ab
--- /dev/null
+++ b/jjb/pipeline/voltha/playground/tucson-build-and-test.groovy
@@ -0,0 +1,367 @@
+// Copyright 2017-2023 Open Networking Foundation (ONF) and the ONF Contributors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// used to deploy VOLTHA and configure ONOS physical PODs
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+def infraNamespace = "infra"
+def volthaNamespace = "voltha"
+def clusterName = "kind-ci"
+pipeline {
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+    timeout(time: 120, unit: 'MINUTES')
+  }
+  environment {
+    PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+    KUBECONFIG="$HOME/.kube/kind-${clusterName}"
+    VOLTCONFIG="$HOME/.volt/config"
+    LOG_FOLDER="$WORKSPACE/${workflow}/"
+    APPS_TO_LOG="etcd kafka onos-classic adapter-open-onu adapter-open-olt rw-core ofagent bbsim radius bbsim-sadis-server onos-config-loader"
+
+  }
+  stages{
+    stage('Download Code') {
+      steps {
+        getVolthaCode([
+          branch: "${branch}",
+          gerritProject: "${gerritProject}",
+          gerritRefspec: "${gerritRefspec}",
+          volthaSystemTestsChange: "${volthaSystemTestsChange}",
+          volthaHelmChartsChange: "${volthaHelmChartsChange}",
+        ])
+      }
+    }
+    stage ("Parse deployment configuration file") {
+      steps {
+        sh returnStdout: true, script: "rm -rf ${configBaseDir}"
+        sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
+        script {
+
+          if (params.workflow.toUpperCase() == "TT") {
+            error("The Tucson POD does not support TT workflow at the moment")
+          }
+
+          if ( params.workflow.toUpperCase() == "DT" ) {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+          }
+          else if ( params.workflow.toUpperCase() == "TT" ) {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+          }
+          else {
+            deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+          }
+        }
+      }
+    }
+    stage('Clean up') {
+      steps {
+        timeout(15) {
+          script {
+            helmTeardown(["default", infraNamespace, volthaNamespace])
+          }
+          timeout(1) {
+            sh returnStdout: false, script: '''
+            # remove orphaned port-forward from different namespaces
+            ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
+            '''
+          }
+        }
+      }
+    }
+    stage('Build patch') {
+      steps {
+        // NOTE that the correct patch has already been checked out
+        // during the getVolthaCode step
+        buildVolthaComponent("${gerritProject}")
+      }
+    }
+    stage('Create K8s Cluster') {
+      steps {
+        script {
+          def clusterExists = sh returnStdout: true, script: """
+          kind get clusters | grep ${clusterName} | wc -l
+          """
+          if (clusterExists.trim() == "0") {
+            createKubernetesCluster([nodes: 3, name: clusterName])
+          }
+        }
+      }
+    }
+    stage('Load image in kind nodes') {
+      steps {
+        loadToKind()
+      }
+    }
+    stage('Install Voltha')  {
+      steps {
+        timeout(20) {
+          script {
+            imageFlags = getVolthaImageFlags(gerritProject)
+            // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
+            def localCharts = false
+            if (volthaHelmChartsChange != "" || gerritProject == "voltha-helm-charts") {
+              localCharts = true
+            }
+            def flags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml ${imageFlags} "
+            // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
+            flags = flags + "--set onos-classic.onosSshPort=30115 " +
+            "--set onos-classic.onosApiPort=30120 " +
+            "--set onos-classic.onosOfPort=31653 " +
+            "--set onos-classic.individualOpenFlowNodePorts=true " + extraHelmFlags
+            volthaDeploy([
+              workflow: workFlow.toLowerCase(),
+              extraHelmFlags: flags,
+              localCharts: localCharts,
+              kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
+              onosReplica: 3,
+              atomixReplica: 3,
+              kafkaReplica: 3,
+              etcdReplica: 3,
+              ])
+          }
+          // start logging
+          sh """
+          rm -rf $WORKSPACE/${workFlow}/
+          mkdir -p $WORKSPACE/${workFlow}
+          _TAG=kail-${workFlow} kail -n infra -n voltha > $WORKSPACE/${workFlow}/onos-voltha-combined.log &
+          """
+          sh returnStdout: false, script: '''
+          # start logging with kail
+
+          mkdir -p $LOG_FOLDER
+
+          list=($APPS_TO_LOG)
+          for app in "${list[@]}"
+          do
+            echo "Starting logs for: ${app}"
+            _TAG=kail-$app kail -l app=$app --since 1h > $LOG_FOLDER/$app.log&
+          done
+          '''
+          sh """
+          JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
+          JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd 2379:2379; done"&
+          JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
+          ps aux | grep port-forward
+          """
+          getPodsInfo("$WORKSPACE")
+        }
+      }
+    }
+    stage('Deploy Kafka Dump Chart') {
+      steps {
+        script {
+          sh returnStdout: false, script: """
+              helm repo add cord https://charts.opencord.org
+              helm repo update
+              if helm version -c --short|grep v2 -q; then
+                helm install -n voltha-kafka-dump cord/voltha-kafka-dump
+              else
+                helm install voltha-kafka-dump cord/voltha-kafka-dump
+              fi
+          """
+        }
+      }
+    }
+    stage('Push Tech-Profile') {
+      when {
+        expression { params.profile != "Default" }
+      }
+      steps {
+        sh returnStdout: false, script: """
+        etcd_container=\$(kubectl get pods -n voltha | grep voltha-etcd-cluster | awk 'NR==1{print \$1}')
+        kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json voltha/\$etcd_container:/tmp/flexpod.json
+        kubectl exec -it \$etcd_container -n voltha -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/XGS-PON/64'
+        """
+      }
+    }
+
+    stage('Push Sadis-config') {
+      steps {
+        sh returnStdout: false, script: """
+        ssh-keygen -R [${deployment_config.nodes[0].ip}]:30115
+        ssh-keyscan -p 30115 -H ${deployment_config.nodes[0].ip} >> ~/.ssh/known_hosts
+        sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay"
+        sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa"
+        sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt"
+        #TRACE in the pipeliner is too chatty, moving to DEBUG
+        sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.opencord.olt.driver"
+        sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager"
+        sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager"
+
+        if [[ "${workFlow.toUpperCase()}" == "DT" ]]; then
+          curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json
+        elif [[ "${workFlow.toUpperCase()}" == "TT" ]]; then
+          curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json
+        else
+          # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file
+          curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
+        fi
+        """
+      }
+    }
+    stage('Reinstall OLT software') {
+      when {
+        expression { params.reinstallOlt }
+      }
+      steps {
+        script {
+          deployment_config.olts.each { olt ->
+            sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'"
+            waitUntil {
+              olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
+              return olt_sw_present.toInteger() == 0
+            }
+            if ( params.branch == 'voltha-2.3' ) {
+              oltDebVersion = oltDebVersionVoltha23
+            } else {
+              oltDebVersion = oltDebVersionMaster
+            }
+            sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --install ${oltDebVersion}'"
+            waitUntil {
+              olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
+              return olt_sw_present.toInteger() == 1
+            }
+            if ( olt.fortygig ) {
+              // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
+              sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'echo port ce128 sp=40000 >> /broadcom/qax.soc ; /opt/bcm68620/svk_init.sh'"
+            }
+          }
+        }
+      }
+    }
+
+    stage('Restart OLT processes') {
+      steps {
+        script {
+          deployment_config.olts.each { olt ->
+            sh returnStdout: false, script: """
+            ssh-keyscan -H ${olt.ip} >> ~/.ssh/known_hosts
+            sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; reboot'
+            sleep 120
+            """
+            waitUntil {
+              onu_discovered = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'grep \"onu discover indication\" /var/log/openolt.log | wc -l'"
+              return onu_discovered.toInteger() > 0
+            }
+          }
+        }
+      }
+    }
+    stage('Run E2E Tests') {
+      steps {
+        script {
+          // different workflows need different make targets and different robot files
+          if ( params.workflow.toUpperCase() == "DT" ) {
+            robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+            robotFile = "Voltha_DT_PODTests.robot"
+            makeTarget = "voltha-dt-test"
+            robotFunctionalKeyword = "-i functionalDt"
+            robotDataplaneKeyword = "-i dataplaneDt"
+          }
+          else if ( params.workflow.toUpperCase() == "TT" ) {
+            // TODO the TT tests have diffent tags, address once/if TT is support on the Tucson POD
+            robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+            robotFile = "Voltha_TT_PODTests.robot"
+            makeTarget = "voltha-tt-test"
+            robotFunctionalKeyword = "-i functionalTt"
+            robotDataplaneKeyword = "-i dataplaneTt"
+          }
+          else {
+            robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+            robotFile = "Voltha_PODTests.robot"
+            makeTarget = "voltha-test"
+            robotFunctionalKeyword = "-i functional"
+            robotDataplaneKeyword = "-i dataplane"
+          }
+        }
+        sh returnStdout: false, script: """
+        mkdir -p $WORKSPACE/RobotLogs
+
+        export ROBOT_CONFIG_FILE="$WORKSPACE/${robotConfigFile}"
+        export ROBOT_MISC_ARGS="${params.extraRobotArgs} --removekeywords wuks -d $WORKSPACE/RobotLogs -v container_log_dir:$WORKSPACE "
+        export ROBOT_FILE="${robotFile}"
+
+        # If the Gerrit comment contains a line with "functional tests" then run the full
+        # functional test suite.  This covers tests tagged either 'sanity' or 'functional'.
+        # Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line
+        REGEX="functional tests"
+        if [[ "${gerritComment}" =~ \$REGEX ]]; then
+          ROBOT_MISC_ARGS+="${robotFunctionalKeyword} "
+        fi
+        # Likewise for dataplane tests
+        REGEX="dataplane tests"
+        if [[ "${gerritComment}" =~ \$REGEX ]]; then
+          ROBOT_MISC_ARGS+="${robotDataplaneKeyword}"
+        fi
+
+        ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+        make -C $WORKSPACE/voltha-system-tests ${makeTarget} || true
+        """
+      }
+    }
+  }
+  post {
+    always {
+      // stop logging
+      sh """
+        P_IDS="\$(ps e -ww -A | grep "_TAG=kail-${workFlow}" | grep -v grep | awk '{print \$1}')"
+        if [ -n "\$P_IDS" ]; then
+          echo \$P_IDS
+          for P_ID in \$P_IDS; do
+            kill -9 \$P_ID
+          done
+        fi
+        gzip $WORKSPACE/${workFlow}/onos-voltha-combined.log || true
+      """
+      sh '''
+      # stop the kail processes
+      list=($APPS_TO_LOG)
+      for app in "${list[@]}"
+      do
+        echo "Stopping logs for: ${app}"
+        _TAG="kail-$app"
+        P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+        if [ -n "$P_IDS" ]; then
+          echo $P_IDS
+          for P_ID in $P_IDS; do
+            kill -9 $P_ID
+          done
+        fi
+      done
+      '''
+      step([$class: 'RobotPublisher',
+        disableArchiveOutput: false,
+        logFileName: 'RobotLogs/log*.html',
+        otherFiles: '',
+        outputFileName: 'RobotLogs/output*.xml',
+        outputPath: '.',
+        passThreshold: 100,
+        reportFileName: 'RobotLogs/report*.html',
+        unstableThreshold: 0,
+        onlyCritical: true]);
+      archiveArtifacts artifacts: '**/*.txt,**/*.gz,*.gz,**/*.log'
+    }
+  }
+}
+
+// refs/changes/06/24206/5
diff --git a/jjb/pipeline/voltha/playground/voltha-dt-physical-functional-tests.groovy b/jjb/pipeline/voltha/playground/voltha-dt-physical-functional-tests.groovy
new file mode 100644
index 0000000..5a14eab
--- /dev/null
+++ b/jjb/pipeline/voltha/playground/voltha-dt-physical-functional-tests.groovy
@@ -0,0 +1,332 @@
+#!/usr/bin/env groovy
+// -----------------------------------------------------------------------
+// Copyright 2017-2023 Open Networking Foundation (ONF) and the ONF Contributors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// -----------------------------------------------------------------------
+
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+node {
+  // Need this so that deployment_config has global scope when it's read later
+  deployment_config = null
+}
+
+def infraNamespace = "infra"
+def volthaNamespace = "voltha"
+
+pipeline {
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+    timeout(time: "${timeout}", unit: 'MINUTES')
+  }
+
+  environment {
+    KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
+    VOLTCONFIG="$HOME/.volt/config-minimal"
+    PATH="$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+  }
+
+  stages {
+    stage('Clone voltha-system-tests') {
+      steps {
+        step([$class: 'WsCleanup'])
+        checkout([
+          $class: 'GitSCM',
+          userRemoteConfigs: [[
+            url: "https://gerrit.opencord.org/voltha-system-tests",
+            refspec: "${volthaSystemTestsChange}"
+          ]],
+          branches: [[ name: "${branch}", ]],
+          extensions: [
+            [$class: 'WipeWorkspace'],
+            [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"],
+            [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+          ],
+        ])
+        script {
+          sh(script:"""
+            if [ '${volthaSystemTestsChange}' != '' ] ; then
+              cd $WORKSPACE/voltha-system-tests;
+              git fetch https://gerrit.opencord.org/voltha-system-tests ${volthaSystemTestsChange} && git checkout FETCH_HEAD
+            fi
+            """)
+        }
+      }
+    }
+    // This checkout allows us to show changes in Jenkins
+    // we only do this on master as we don't branch all the repos for all the releases
+    // (we should compute the difference by tracking the container version, not the code)
+    stage('Download All the VOLTHA repos') {
+      when {
+        expression {
+          return "${branch}" == 'master';
+        }
+      }
+      steps {
+       checkout(changelog: true,
+         poll: false,
+         scm: [$class: 'RepoScm',
+           manifestRepositoryUrl: "${params.manifestUrl}",
+           manifestBranch: "${params.branch}",
+           currentBranch: true,
+           destinationDir: 'voltha',
+           forceSync: true,
+           resetFirst: true,
+           quiet: true,
+           jobs: 4,
+           showAllChanges: true]
+         )
+      }
+    }
+    stage ('Initialize') {
+      steps {
+        sh returnStdout: false, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
+        script {
+           deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+        }
+        installVoltctl("${branch}")
+        sh """
+        ps -ef | grep port-forward
+        """
+
+        sh returnStdout: false, script: '''
+        # remove orphaned port-forward from different namespaces
+        ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
+        '''
+        sh """
+        JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-api" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
+        JENKINS_NODE_COOKIE="dontKillMe" _TAG="etcd" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd ${params.VolthaEtcdPort}:2379; done"&
+        JENKINS_NODE_COOKIE="dontKillMe" _TAG="kafka" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
+        ps aux | grep port-forward
+        """
+
+        sh("""ps -ef | grep port-forward""")
+
+        sh(returnStdout: false, script: """
+        mkdir -p "$WORKSPACE/bin"
+
+        # install kail
+        make -C "$WORKSPACE/voltha-system-tests" KAIL_PATH="$WORKSPACE/bin" kail
+
+        # Default kind-voltha config doesn't work on ONF demo pod for accessing kvstore.
+        # The issue is that the mgmt node is also one of the k8s nodes and so port forwarding doesn't work.
+        # We should change this. In the meantime here is a workaround.
+           set +e
+
+        # Remove noise from voltha-core logs
+           voltctl log level set WARN read-write-core#github.com/opencord/voltha-go/db/model
+           voltctl log level set WARN read-write-core#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+        # Remove noise from openolt logs
+           voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/db
+           voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/probe
+           voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+        """)
+      }
+    }
+
+    stage('Functional Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+        ROBOT_FILE="Voltha_DT_PODTests.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/dt-workflow/FunctionalTests"
+      }
+      steps {
+        sh """
+        ps -ef | grep port-forward
+        mkdir -p $ROBOT_LOGS_DIR
+        if [ ${params.withFttb} = false ]; then
+          if ( ${powerSwitch} ); then
+               export ROBOT_MISC_ARGS="--removekeywords wuks -i PowerSwitch -i sanityDt -i functionalDt -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+               if ( ${powerCycleOlt} ); then
+                    ROBOT_MISC_ARGS+=" -v power_cycle_olt:True"
+               fi
+          else
+               export ROBOT_MISC_ARGS="--removekeywords wuks -e PowerSwitch -i sanityDt -i functionalDt -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+          fi
+          ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+          make -C $WORKSPACE/voltha-system-tests voltha-dt-test || true
+        fi
+        """
+      }
+    }
+
+    stage('FTTB Functional Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+        ROBOT_FILE="Voltha_DT_FTTB_Tests.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/dt-workflow/FunctionalTests"
+      }
+      steps {
+        sh """
+        mkdir -p $ROBOT_LOGS_DIR
+        if [ ${params.withFttb} = true ]; then
+          export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i sanityDtFttb -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE"
+          ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace} -v has_dataplane:False"
+          make -C $WORKSPACE/voltha-system-tests voltha-dt-test || true
+        fi
+        """
+      }
+    }
+
+    stage('Failure/Recovery Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+        ROBOT_FILE="Voltha_DT_FailureScenarios.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/dt-workflow/FailureScenarios"
+      }
+      steps {
+        sh """
+        ps -ef | grep port-forward
+        mkdir -p $ROBOT_LOGS_DIR
+        if [ ${params.withFttb} = false ]; then
+          if ( ${powerSwitch} ); then
+               export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functionalDt -i PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+          else
+               export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functionalDt -e PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+          fi
+          ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+          make -C $WORKSPACE/voltha-system-tests voltha-dt-test || true
+        fi
+        """
+      }
+    }
+
+    stage('Dataplane Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+        ROBOT_FILE="Voltha_DT_PODTests.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/dt-workflow/DataplaneTests"
+      }
+      steps {
+        sh """
+        ps -ef | grep port-forward
+        mkdir -p $ROBOT_LOGS_DIR
+        if [ ${params.withFttb} = false ]; then
+          export ROBOT_MISC_ARGS="--removekeywords wuks -i dataplaneDt -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+          ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+          make -C $WORKSPACE/voltha-system-tests voltha-dt-test || true
+        fi
+        """
+      }
+    }
+    stage('HA Tests') {
+       environment {
+       ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+       ROBOT_FILE="Voltha_ONOSHATests.robot"
+       ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/ONOSHAScenarios"
+      }
+      steps {
+        sh """
+        ps -ef | grep port-forward
+        mkdir -p $ROBOT_LOGS_DIR
+        if [ ${params.withFttb} = false ]; then
+          export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v workflow:${params.workFlow} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+          ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+          make -C $WORKSPACE/voltha-system-tests voltha-test || true
+        fi
+        """
+      }
+    }
+
+    stage('Multiple OLT Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+        ROBOT_FILE="Voltha_DT_MultiOLT_Tests.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/dt-workflow/MultipleOLTScenarios"
+      }
+      steps {
+        sh """
+        ps -ef | grep port-forward
+        mkdir -p $ROBOT_LOGS_DIR
+        if [ ${params.withFttb} = false ]; then
+          if ( ${powerSwitch} ); then
+               export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functionalDt -i PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+          else
+               export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functionalDt -e PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+          fi
+          ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+          make -C $WORKSPACE/voltha-system-tests voltha-dt-test || true
+        fi
+        """
+      }
+    }
+
+
+    stage('Error Scenario Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+        ROBOT_FILE="Voltha_ErrorScenarios.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/dt-workflow/ErrorScenarios"
+      }
+      steps {
+        sh """
+        mkdir -p $ROBOT_LOGS_DIR
+        if [ ${params.withFttb} = false ]; then
+          export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functional -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v workflow:${params.workFlow} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+          ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+          make -C $WORKSPACE/voltha-system-tests voltha-test || true
+        fi
+        """
+      }
+    }
+  }
+  post {
+    always {
+      getPodsInfo("$WORKSPACE/pods")
+      sh returnStdout: false, script: '''
+      set +e
+
+      # collect logs collected in the Robot Framework StartLogging keyword
+      cd $WORKSPACE
+      gzip *-combined.log || true
+      rm *-combined.log || true
+      '''
+      script {
+        deployment_config.olts.each { olt ->
+            if (olt.type == null || olt.type == "" || olt.type == "openolt") {
+              sh returnStdout: false, script: """
+              sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/openolt.log $WORKSPACE/openolt-${olt.sship}.log || true
+              sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt-${olt.sship}.log  # Remove escape sequences
+              sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/dev_mgmt_daemon.log $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log || true
+              sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log  # Remove escape sequences
+              sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/startup.log $WORKSPACE/startup-${olt.sship}.log || true
+              sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/startup-${olt.sship}.log || true # Remove escape sequences
+              sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/openolt_process_watchdog.log $WORKSPACE/openolt_process_watchdog-${olt.sship}.log || true
+              sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt_process_watchdog-${olt.sship}.log || true # Remove escape sequences
+              """
+            }
+        }
+      }
+      step([$class: 'RobotPublisher',
+        disableArchiveOutput: false,
+        logFileName: '**/log*.html',
+        otherFiles: '',
+        outputFileName: '**/output*.xml',
+        outputPath: 'RobotLogs',
+        passThreshold: 100,
+        reportFileName: '**/report*.html',
+        unstableThreshold: 0,
+        onlyCritical: true
+        ]);
+      archiveArtifacts artifacts: '**/*.log,**/*.gz,**/*.tgz,*.txt,pods/*.txt'
+    }
+  }
+}
diff --git a/jjb/pipeline/voltha/playground/voltha-physical-functional-tests.groovy b/jjb/pipeline/voltha/playground/voltha-physical-functional-tests.groovy
new file mode 100644
index 0000000..8565148
--- /dev/null
+++ b/jjb/pipeline/voltha/playground/voltha-physical-functional-tests.groovy
@@ -0,0 +1,269 @@
+#!/usr/bin/env groovy
+// -----------------------------------------------------------------------
+// Copyright 2017-2023 Open Networking Foundation (ONF) and the ONF Contributors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// -----------------------------------------------------------------------
+
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+def infraNamespace = "infra"
+def volthaNamespace = "voltha"
+
+node {
+  // Need this so that deployment_config has global scope when it's read later
+  deployment_config = null
+}
+
+pipeline {
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+    timeout(time: "${timeout}", unit: 'MINUTES')
+  }
+
+  environment {
+    KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
+    VOLTCONFIG="$HOME/.volt/config-minimal"
+    PATH="$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+  }
+  stages {
+    stage('Clone voltha-system-tests') {
+      steps {
+        step([$class: 'WsCleanup'])
+        checkout([
+          $class: 'GitSCM',
+          userRemoteConfigs: [[
+            url: "https://gerrit.opencord.org/voltha-system-tests",
+            refspec: "${volthaSystemTestsChange}"
+          ]],
+          branches: [[ name: "${branch}", ]],
+          extensions: [
+            [$class: 'WipeWorkspace'],
+            [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"],
+            [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+          ],
+        ])
+        script {
+          sh(script:"""
+            if [ '${volthaSystemTestsChange}' != '' ] ; then
+              cd $WORKSPACE/voltha-system-tests;
+              git fetch https://gerrit.opencord.org/voltha-system-tests ${volthaSystemTestsChange} && git checkout FETCH_HEAD
+            fi
+            """)
+        }
+      }
+    }
+    stage('Download All the VOLTHA repos') {
+      when {
+        expression {
+          return "${branch}" == 'master';
+        }
+      }
+      steps {
+       checkout(changelog: true,
+         poll: false,
+         scm: [$class: 'RepoScm',
+           manifestRepositoryUrl: "${params.manifestUrl}",
+           manifestBranch: "${params.branch}",
+           currentBranch: true,
+           destinationDir: 'voltha',
+           forceSync: true,
+           resetFirst: true,
+           quiet: true,
+           jobs: 4,
+           showAllChanges: true]
+         )
+      }
+    }
+    stage ('Initialize') {
+      steps {
+        sh returnStdout: false, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
+        script {
+          deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+        }
+	installVoltctl("${branch}")
+	
+	sh(returnStdout: false, script: """
+
+        mkdir -p "$WORKSPACE/bin"
+
+        # install kail
+        make -C "$WORKSPACE/voltha-system-tests" KAIL_PATH="$WORKSPACE/bin" kail
+
+        if [ "${params.branch}" == "master" ]; then
+        # Default kind-voltha config doesn't work on ONF demo pod for accessing kvstore.
+        # The issue is that the mgmt node is also one of the k8s nodes and so port forwarding doesn't work.
+        # We should change this. In the meantime here is a workaround.
+           set +e
+
+        # Remove noise from voltha-core logs
+           voltctl log level set WARN read-write-core#github.com/opencord/voltha-go/db/model
+           voltctl log level set WARN read-write-core#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+        # Remove noise from openolt logs
+           voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/db
+           voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/probe
+           voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+        fi
+        """)
+      }
+    }
+
+    stage('Functional Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+        ROBOT_FILE="Voltha_PODTests.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/FunctionalTests"
+      }
+      steps {
+        sh """
+        mkdir -p $ROBOT_LOGS_DIR
+        if ( ${powerSwitch} ); then
+             export ROBOT_MISC_ARGS="--removekeywords wuks -i PowerSwitch -i sanity -i functional -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+             if ( ${powerCycleOlt} ); then
+                  ROBOT_MISC_ARGS+=" -v power_cycle_olt:True"
+             fi
+        else
+             export ROBOT_MISC_ARGS="--removekeywords wuks -e PowerSwitch -i sanity -i functional -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+        fi
+        ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+        make -C $WORKSPACE/voltha-system-tests voltha-test || true
+        """
+      }
+    }
+
+    stage('Failure/Recovery Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+        ROBOT_FILE="Voltha_FailureScenarios.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/FailureScenarios"
+      }
+      steps {
+        sh """
+        mkdir -p $ROBOT_LOGS_DIR
+        if ( ${powerSwitch} ); then
+             export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functional -i PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+        else
+             export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functional -e PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+        fi
+        ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+        make -C $WORKSPACE/voltha-system-tests voltha-test || true
+        """
+      }
+    }
+
+    stage('Dataplane Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+        ROBOT_FILE="Voltha_PODTests.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/DataplaneTests"
+      }
+      steps {
+        sh """
+        mkdir -p $ROBOT_LOGS_DIR
+        export ROBOT_MISC_ARGS="--removekeywords wuks -i dataplane -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+        ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+        make -C $WORKSPACE/voltha-system-tests voltha-test || true
+        """
+      }
+    }
+    stage('HA Tests') {
+       environment {
+       ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+       ROBOT_FILE="Voltha_ONOSHATests.robot"
+       ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/ONOSHAScenarios"
+      }
+      steps {
+       sh """
+       mkdir -p $ROBOT_LOGS_DIR
+       export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v workflow:${params.workFlow} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+       ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+       make -C $WORKSPACE/voltha-system-tests voltha-test || true
+       """
+      }
+    }
+
+    stage('Error Scenario Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+        ROBOT_FILE="Voltha_ErrorScenarios.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/ErrorScenarios"
+      }
+      steps {
+        sh """
+        mkdir -p $ROBOT_LOGS_DIR
+        export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functional -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+        ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+        make -C $WORKSPACE/voltha-system-tests voltha-test || true
+        """
+      }
+    }
+  }
+  post {
+    always {
+      getPodsInfo("$WORKSPACE/pods")
+      sh returnStdout: false, script: '''
+      set +e
+
+      # collect logs collected in the Robot Framework StartLogging keyword
+      cd $WORKSPACE
+      gzip *-combined.log || true
+      rm *-combined.log || true
+
+      # store information on the running pods
+      kubectl get pods --all-namespaces -o wide > $WORKSPACE/pods.txt || true
+      kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq | tee $WORKSPACE/pod-images.txt || true
+      kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq | tee $WORKSPACE/pod-imagesId.txt || true
+
+
+      # collect ETCD cluster logs
+      mkdir -p $WORKSPACE/etcd
+      printf '%s\n' $(kubectl get pods -l app=etcd -o=jsonpath="{.items[*]['metadata.name']}") | xargs -I% bash -c "kubectl logs % > $WORKSPACE/etcd/%.log"
+      '''
+      script {
+        deployment_config.olts.each { olt ->
+          if (olt.type == null || olt.type == "" || olt.type == "openolt") {
+            sh returnStdout: false, script: """
+            sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/openolt.log $WORKSPACE/openolt-${olt.sship}.log || true
+            sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt-${olt.sship}.log  # Remove escape sequences
+            sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/dev_mgmt_daemon.log $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log || true
+            sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log  # Remove escape sequences
+            sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/startup.log $WORKSPACE/startup-${olt.sship}.log || true
+            sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/startup-${olt.sship}.log || true # Remove escape sequences
+            sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/openolt_process_watchdog.log $WORKSPACE/openolt_process_watchdog-${olt.sship}.log || true
+            sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt_process_watchdog-${olt.sship}.log || true # Remove escape sequences
+            """
+          }
+        }
+      }
+      step([$class: 'RobotPublisher',
+        disableArchiveOutput: false,
+        logFileName: '**/log*.html',
+        otherFiles: '',
+        outputFileName: '**/output*.xml',
+        outputPath: 'RobotLogs',
+        passThreshold: 100,
+        reportFileName: '**/report*.html',
+        unstableThreshold: 0,
+        onlyCritical: true
+        ]);
+      archiveArtifacts artifacts: '**/*.log,**/*.gz,**/*.tgz,*.txt,pods/*.txt'
+    }
+  }
+}
diff --git a/jjb/pipeline/voltha/playground/voltha-physical-soak-dt-tests.groovy b/jjb/pipeline/voltha/playground/voltha-physical-soak-dt-tests.groovy
new file mode 100644
index 0000000..6320cfb
--- /dev/null
+++ b/jjb/pipeline/voltha/playground/voltha-physical-soak-dt-tests.groovy
@@ -0,0 +1,258 @@
+#!/usr/bin/env groovy
+// -----------------------------------------------------------------------
+// Copyright 2017-2023 Open Networking Foundation (ONF) and the ONF Contributors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// -----------------------------------------------------------------------
+
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+node {
+  // Need this so that deployment_config has global scope when it's read later
+  deployment_config = null
+}
+
+def volthaNamespace = "voltha"
+def infraNamespace = "infra"
+
+pipeline {
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+    timeout(time: "${timeout}", unit: 'MINUTES')
+  }
+
+  environment {
+    KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
+    VOLTCONFIG="$HOME/.volt/config-minimal"
+    PATH="$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+  }
+
+
+  stages {
+    stage('Clone voltha-system-tests') {
+      steps {
+        step([$class: 'WsCleanup'])
+        checkout([
+          $class: 'GitSCM',
+          userRemoteConfigs: [[
+            url: "https://gerrit.opencord.org/voltha-system-tests",
+            refspec: "${volthaSystemTestsChange}"
+          ]],
+          branches: [[ name: "${branch}", ]],
+          extensions: [
+            [$class: 'WipeWorkspace'],
+            [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"],
+            [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+          ],
+        ])
+        script {
+          sh(script:"""
+            if [ '${volthaSystemTestsChange}' != '' ] ; then
+              cd $WORKSPACE/voltha-system-tests;
+              git fetch https://gerrit.opencord.org/voltha-system-tests ${volthaSystemTestsChange} && git checkout FETCH_HEAD
+            fi
+            """)
+        }
+      }
+    }
+    // This checkout allows us to show changes in Jenkins
+    // we only do this on master as we don't branch all the repos for all the releases
+    // (we should compute the difference by tracking the container version, not the code)
+    stage('Download All the VOLTHA repos') {
+      when {
+        expression {
+          return "${branch}" == 'master';
+        }
+      }
+      steps {
+       checkout(changelog: true,
+         poll: false,
+         scm: [$class: 'RepoScm',
+           manifestRepositoryUrl: "${params.manifestUrl}",
+           manifestBranch: "${params.branch}",
+           currentBranch: true,
+           destinationDir: 'voltha',
+           forceSync: true,
+           resetFirst: true,
+           quiet: true,
+           jobs: 4,
+           showAllChanges: true]
+         )
+      }
+    }
+    stage ('Initialize') {
+      steps {
+        sh returnStdout: false, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
+        script {
+           deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+        }
+        installVoltctl("${branch}")
+
+	sh(returnStdout: false, script: """
+
+        mkdir -p "$WORKSPACE/bin"
+
+        # install kail
+        make -C "$WORKSPACE/voltha-system-tests" KAIL_PATH="$WORKSPACE/bin" kail
+
+        if [ "${params.branch}" == "master" ]; then
+        # Default kind-voltha config doesn't work on ONF demo pod for accessing kvstore.
+        # The issue is that the mgmt node is also one of the k8s nodes and so port forwarding doesn't work.
+        # We should change this. In the meantime here is a workaround.
+           set +e
+
+        # Remove noise from voltha-core logs
+           voltctl log level set WARN read-write-core#github.com/opencord/voltha-go/db/model
+           voltctl log level set WARN read-write-core#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+        # Remove noise from openolt logs
+           voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/db
+           voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/probe
+           voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+        fi
+        """)
+
+        sh("""
+        mkdir -p $WORKSPACE/voltha-pods-mem-consumption
+        cd $WORKSPACE/voltha-system-tests
+        make vst_venv
+        source ./vst_venv/bin/activate || true
+        # Collect initial memory consumption
+        python scripts/mem_consumption.py -o $WORKSPACE/voltha-pods-mem-consumption -a 0.0.0.0:31301 -n ${volthaNamespace} || true
+        """)
+      }
+    }
+
+    stage('Functional Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+        ROBOT_FILE="Voltha_DT_PODTests.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/dt-workflow/FunctionalTests"
+      }
+      steps {
+        sh """
+        JENKINS_NODE_COOKIE="dontKillMe" _TAG="prometheus" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n cattle-prometheus svc/access-prometheus 31301:80; done"&
+        ps aux | grep port-forward
+        mkdir -p $ROBOT_LOGS_DIR
+        if [ "${params.testType}" == "Functional" ]; then
+            if ( ${powerSwitch} ); then
+                 export ROBOT_MISC_ARGS="--removekeywords wuks -i PowerSwitch -i soak -e dataplaneDt -e bbsim -e notready -d $ROBOT_LOGS_DIR -v SOAK_TEST:True -v logging:False -v teardown_device:False -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE"
+            else
+                 export ROBOT_MISC_ARGS="--removekeywords wuks -e PowerSwitch -i soak -e dataplaneDt -e bbsim -e notready -d $ROBOT_LOGS_DIR -v SOAK_TEST:True -v logging:False -v teardown_device:False -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE"
+            fi
+            ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+            make -C $WORKSPACE/voltha-system-tests voltha-dt-test || true
+        fi
+        """
+      }
+    }
+
+    stage('Failure/Recovery Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+        ROBOT_FILE="Voltha_DT_FailureScenarios.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/dt-workflow/FailureScenarios"
+      }
+      steps {
+        sh """
+        mkdir -p $ROBOT_LOGS_DIR
+        if [ "${params.testType}" == "Failure" ]; then
+           export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i soak -e PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v SOAK_TEST:True -v logging:False -v teardown_device:False -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE"
+           ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+           make -C $WORKSPACE/voltha-system-tests voltha-dt-test || true
+        fi
+        """
+      }
+    }
+
+    stage('Dataplane Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+        ROBOT_FILE="Voltha_DT_PODTests.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/dt-workflow/DataplaneTests"
+      }
+      steps {
+        sh """
+        mkdir -p $ROBOT_LOGS_DIR
+        if [ "${params.testType}" == "Dataplane" ]; then
+           export ROBOT_MISC_ARGS="--removekeywords wuks -i soakDataplane -e bbsim -e notready -d $ROBOT_LOGS_DIR -v SOAK_TEST:True -v logging:False -v teardown_device:False -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE"
+           ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+           make -C $WORKSPACE/voltha-system-tests voltha-dt-test || true
+        fi
+        """
+      }
+    }
+
+  }
+  post {
+    always {
+      getPodsInfo("$WORKSPACE/pods")
+      sh returnStdout: false, script: '''
+      set +e
+
+      # collect logs collected in the Robot Framework StartLogging keyword
+      cd $WORKSPACE
+      gzip *-combined.log || true
+      rm *-combined.log || true
+
+      # collect ETCD cluster logs
+      mkdir -p $WORKSPACE/etcd
+      printf '%s\n' $(kubectl get pods -l app=etcd -o=jsonpath="{.items[*]['metadata.name']}") | xargs -I% bash -c "kubectl logs % > $WORKSPACE/etcd/%.log"
+      '''
+      script {
+        deployment_config.olts.each { olt ->
+          sh returnStdout: false, script: """
+          sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/openolt.log $WORKSPACE/openolt-${olt.sship}.log || true
+          sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt-${olt.sship}.log  # Remove escape sequences
+          sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/dev_mgmt_daemon.log $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log || true
+          sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log  # Remove escape sequences
+          sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/startup.log $WORKSPACE/startup-${olt.sship}.log || true
+          sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/startup-${olt.sship}.log || true # Remove escape sequences
+          sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/openolt_process_watchdog.log $WORKSPACE/openolt_process_watchdog-${olt.sship}.log || true
+          sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt_process_watchdog-${olt.sship}.log || true # Remove escape sequences
+          """
+        }
+      }
+      step([$class: 'RobotPublisher',
+        disableArchiveOutput: false,
+        logFileName: '**/log*.html',
+        otherFiles: '',
+        outputFileName: '**/output*.xml',
+        outputPath: 'RobotLogs',
+        passThreshold: 100,
+        reportFileName: '**/report*.html',
+        unstableThreshold: 0,
+        onlyCritical: true
+        ]);
+      // get cpu usage by container
+      sh """
+      mkdir -p $WORKSPACE/plots || true
+      cd $WORKSPACE/voltha-system-tests
+      source ./vst_venv/bin/activate || true
+      sleep 60 # we have to wait for prometheus to collect all the information
+      python scripts/sizing.py -o $WORKSPACE/plots -a 0.0.0.0:31301 -n ${volthaNamespace} -s 3600 || true
+      # Collect memory consumption of voltha pods once all the tests are complete
+      python scripts/mem_consumption.py -o $WORKSPACE/voltha-pods-mem-consumption -a 0.0.0.0:31301 -n ${volthaNamespace} || true
+      """
+      archiveArtifacts artifacts: '**/*.log,**/*.gz,**/*.tgz,*.txt,pods/*.txt,plots/*,voltha-pods-mem-consumption/*'
+    }
+  }
+}
+
+// [EOF]
diff --git a/jjb/pipeline/voltha/playground/voltha-scale-lwc-test.groovy b/jjb/pipeline/voltha/playground/voltha-scale-lwc-test.groovy
new file mode 100644
index 0000000..84308ac
--- /dev/null
+++ b/jjb/pipeline/voltha/playground/voltha-scale-lwc-test.groovy
@@ -0,0 +1,226 @@
+// Copyright 2019-2023 Open Networking Foundation (ONF) and the ONF Contributors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// deploy VOLTHA and performs a scale test with the LWC controller
+
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+// [TODO] fix path, achilles heel for testing.
+def lwc_helm_chart_path="/home/jenkins/Radisys_LWC_helm_charts"
+def value_file="/home/jenkins/lwc-values.yaml"
+def workflow="dt"
+
+pipeline {
+
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+      timeout(time: 60, unit: 'MINUTES')
+  }
+  environment {
+    JENKINS_NODE_COOKIE="dontKillMe" // do not kill processes after the build is done
+    KUBECONFIG="$HOME/.kube/config"
+    VOLTCONFIG="$HOME/.volt/config"
+    SSHPASS="karaf"
+    VOLTHA_LOG_LEVEL="${logLevel}"
+    NUM_OF_BBSIM="${olts}"
+    NUM_OF_OPENONU="${openonuAdapterReplicas}"
+    NUM_OF_ONOS="${onosReplicas}"
+    NUM_OF_ATOMIX="${atomixReplicas}"
+    EXTRA_HELM_FLAGS=" "
+    LOG_FOLDER="$WORKSPACE/logs"
+    GERRIT_PROJECT="${GERRIT_PROJECT}"
+    PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+  }
+
+  stages {
+    stage ('Cleanup') {
+      steps {
+        script {
+          try {
+            timeout(time: 5, unit: 'MINUTES') {
+              sh returnStdout: false, script: '''
+              cd $WORKSPACE
+              rm -rf $WORKSPACE/*
+              '''
+              // removing the voltha-infra chart first
+              // if we don't ONOS might get stuck because of all the events when BBSim goes down
+              sh returnStdout: false, script: '''
+              set +x
+              helm del -n infra voltha-infra || true
+              helm del voltha-infra || true
+              echo -ne "\nWaiting for ONOS to be removed..."
+              onos=$(kubectl get pod -n default -l app=onos-classic --no-headers | wc -l)
+              while [[ $onos != 0 ]]; do
+                onos=$(kubectl get pod -n default -l app=onos-classic --no-headers | wc -l)
+                sleep 5
+                echo -ne "."
+              done
+              '''
+            }
+          } catch(org.jenkinsci.plugins.workflow.steps.FlowInterruptedException e) {
+            // if we have a timeout in the Cleanup fase most likely ONOS got stuck somewhere, thuse force remove the pods
+            sh '''
+              kubectl get pods | grep Terminating | awk '{print $1}' | xargs kubectl delete pod --force --grace-period=0
+            '''
+          }
+          timeout(time: 10, unit: 'MINUTES') {
+            script {
+              helmTeardown(["default", "voltha1", "voltha-infra"])
+            }
+            sh returnStdout: false, script: '''
+              helm repo add onf https://charts.opencord.org
+              helm repo update
+
+              # remove all persistent volume claims
+              kubectl delete pvc --all-namespaces --all
+              PVCS=\$(kubectl get pvc --all-namespaces --no-headers | wc -l)
+              while [[ \$PVCS != 0 ]]; do
+                sleep 5
+                PVCS=\$(kubectl get pvc --all-namespaces --no-headers | wc -l)
+              done
+
+              # remove orphaned port-forward from different namespaces
+              ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
+            '''
+          }
+        }
+      }
+    }
+    stage('Download Code') {
+      steps {
+        getVolthaCode([
+          branch: "${release}",
+          volthaSystemTestsChange: "${volthaSystemTestsChange}",
+          volthaHelmChartsChange: "${volthaHelmChartsChange}",
+        ])
+      }
+    }
+    stage('Deploy Voltha') {
+      steps {
+        timeout(time: 5, unit: 'MINUTES') {
+          installVoltctl("${release}")
+          script {
+            startComponentsLogs([
+              appsToLog: [
+                'app.kubernetes.io/name=etcd',
+                'app.kubernetes.io/name=kafka',
+                'app=lwc',
+                'app=adapter-open-onu',
+                'app=adapter-open-olt',
+                'app=rw-core',
+                'app=bbsim',
+              ]
+            ])
+          }
+        }
+        timeout(time: 10, unit: 'MINUTES') {
+          sh """
+          cd /home/jenkins/Radisys_LWC_helm_charts
+
+          helm dep update ${lwc_helm_chart_path}/voltha-infra
+          helm upgrade --install --create-namespace -n infra voltha-infra ${lwc_helm_chart_path}/voltha-infra -f examples/${workflow}-values.yaml \
+            -f ${value_file} --wait
+
+          # helm dep update ${lwc_helm_chart_path}/voltha-stack
+          helm upgrade --install --create-namespace -n voltha1 voltha1 onf/voltha-stack \
+          --set voltha.ingress.enabled=true --set voltha.ingress.enableVirtualHosts=true --set voltha.fullHostnameOverride=voltha.scale1.dev \
+          -f ${value_file} --wait
+
+          helm upgrade --install -n voltha1 bbsim0 onf/bbsim --set olt_id=10 -f examples/${workflow}-values.yaml --set pon=${pons},onu=${onus} --version 4.6.0 --set oltRebootDelay=5 --wait
+          """
+        }
+      }
+    }
+    stage('Load MIB Template') {
+      when {
+        expression {
+          return params.withMibTemplate
+        }
+      }
+      steps {
+        sh """
+        # load MIB template
+        wget ${mibTemplateUrl} -O mibTemplate.json
+        cat mibTemplate.json | kubectl exec -it -n infra \$(kubectl get pods -n infra |grep etcd-0 | awk 'NR==1{print \$1}') -- etcdctl put service/voltha/omci_mibs/go_templates/BBSM/12345123451234512345/BBSM_IMG_00001
+        """
+      }
+    }
+    stage('Run Test') {
+      steps {
+        sh """
+          mkdir -p $WORKSPACE/RobotLogs
+          cd $WORKSPACE/voltha-system-tests
+          make vst_venv
+
+          daemonize -E JENKINS_NODE_COOKIE="dontKillMe" /usr/local/bin/kubectl port-forward -n infra svc/lwc 8182:8181 --address 0.0.0.0
+          daemonize -E JENKINS_NODE_COOKIE="dontKillMe" /usr/local/bin/kubectl port-forward -n voltha1 svc/voltha1-voltha-api 55555 --address 0.0.0.0
+
+          source ./vst_venv/bin/activate
+          robot -d $WORKSPACE/RobotLogs \
+          --exitonfailure \
+          -v pon:${pons} -v onu:${onus} \
+          tests/scale/Voltha_Scale_Tests_lwc.robot
+
+          python tests/scale/collect-result.py -r $WORKSPACE/RobotLogs/output.xml -p $WORKSPACE/plots > $WORKSPACE/execution-time.txt || true
+          cat $WORKSPACE/execution-time.txt
+        """
+      }
+    }
+  }
+  post {
+    always {
+      stopComponentsLogs()
+      script {
+        try {
+          step([$class: 'RobotPublisher',
+            disableArchiveOutput: false,
+            logFileName: '**/log*.html',
+            otherFiles: '',
+            outputFileName: '**/output*.xml',
+            outputPath: 'RobotLogs',
+            passThreshold: 100,
+            reportFileName: '**/report*.html',
+            onlyCritical: true,
+            unstableThreshold: 0]);
+        } catch (Exception e) {
+            println "Cannot archive Robot Logs: ${e.toString()}"
+        }
+      }
+      plot([
+        csvFileName: 'scale-test.csv',
+        csvSeries: [
+          [file: 'plots/plot-lwc-olts.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-onus.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-lwc-ports.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-openolt-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-lwc-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-openolt-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-lwc-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+        ],
+        group: 'Voltha-Scale-Numbers', numBuilds: '20', style: 'line', title: "Scale Test (OLTs: ${olts}, PONs: ${pons}, ONUs: ${onus}, UNIs: ${unis})", yaxis: 'Time (s)', useDescr: true
+      ])
+      getPodsInfo("$LOG_FOLDER")
+      archiveArtifacts artifacts: 'execution-time.txt,logs/*,logs/pprof/*,RobotLogs/**/*,plots/*,etcd-metrics/*'
+    }
+  }
+}
diff --git a/jjb/pipeline/voltha/playground/voltha-scale-multi-stack.groovy b/jjb/pipeline/voltha/playground/voltha-scale-multi-stack.groovy
new file mode 100644
index 0000000..8420da0
--- /dev/null
+++ b/jjb/pipeline/voltha/playground/voltha-scale-multi-stack.groovy
@@ -0,0 +1,468 @@
+// Copyright 2019-2023 Open Networking Foundation (ONF) and the ONF Contributors//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// deploy VOLTHA using kind-voltha and performs a scale test
+
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+pipeline {
+
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+      timeout(time: 120, unit: 'MINUTES')
+  }
+  environment {
+    JENKINS_NODE_COOKIE="dontKillMe" // do not kill processes after the build is done
+    KUBECONFIG="$HOME/.kube/config"
+    SSHPASS="karaf"
+    PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+
+    LOG_FOLDER="$WORKSPACE/logs"
+  }
+
+  stages {
+    stage ('Cleanup') {
+      steps {
+        timeout(time: 11, unit: 'MINUTES') {
+          script {
+            def namespaces = ["infra"]
+            // FIXME we may have leftovers from more VOLTHA stacks (eg: run1 had 10 stacks, run2 had 2 stacks)
+            volthaStacks.toInteger().times {
+              namespaces += "voltha${it + 1}"
+            }
+            helmTeardown(namespaces)
+          }
+          sh returnStdout: false, script: '''
+            helm repo add onf https://charts.opencord.org
+            helm repo update
+
+            # remove all persistent volume claims
+            kubectl delete pvc --all-namespaces --all
+            PVCS=\$(kubectl get pvc --all-namespaces --no-headers | wc -l)
+            while [[ \$PVCS != 0 ]]; do
+              sleep 5
+              PVCS=\$(kubectl get pvc --all-namespaces --no-headers | wc -l)
+            done
+
+            # remove orphaned port-forward from different namespaces
+            ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
+
+            cd $WORKSPACE
+            rm -rf $WORKSPACE/*
+          '''
+        }
+      }
+    }
+    stage('Download Code') {
+      steps {
+        getVolthaCode([
+          branch: "${release}",
+          volthaSystemTestsChange: "${volthaSystemTestsChange}",
+          volthaHelmChartsChange: "${volthaHelmChartsChange}",
+        ])
+      }
+    }
+    stage('Deploy common infrastructure') {
+      // includes monitoring
+      steps {
+        sh '''
+        if [ ${withMonitoring} = true ] ; then
+          helm install -n infra nem-monitoring cord/nem-monitoring \
+          -f $HOME/voltha-scale/grafana.yaml \
+          --set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \
+          --set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false
+        fi
+        '''
+      }
+    }
+    stage('Start logging') {
+      steps {
+        script {
+          startComponentsLogs([
+            appsToLog: [
+              'app.kubernetes.io/name=etcd',
+              'app.kubernetes.io/name=kafka',
+              'app=onos-classic',
+              'app=adapter-open-onu',
+              'app=adapter-open-olt',
+              'app=rw-core',
+              'app=ofagent',
+              'app=bbsim',
+              'app=radius',
+              'app=bbsim-sadis-server',
+              'app=onos-config-loader',
+            ]
+          ])
+        }
+      }
+    }
+    stage('Deploy VOLTHA infrastructure') {
+      steps {
+        timeout(time: 5, unit: 'MINUTES') {
+          script {
+            def localCharts = false
+            if (volthaHelmChartsChange != "" || release != "master") {
+              localCharts = true
+            }
+
+            def infraHelmFlags =
+                "--set global.log_level=${logLevel} " +
+                "--set radius.enabled=${withEapol} " +
+                "--set onos-classic.onosSshPort=30115 " +
+                "--set onos-classic.onosApiPort=30120 " +
+                params.extraHelmFlags
+
+            volthaInfraDeploy([
+              workflow: workflow,
+              infraNamespace: "infra",
+              extraHelmFlags: infraHelmFlags,
+              localCharts: localCharts,
+              onosReplica: onosReplicas,
+              atomixReplica: atomixReplicas,
+              kafkaReplica: kafkaReplicas,
+              etcdReplica: etcdReplicas,
+            ])
+          }
+        }
+      }
+    }
+    stage('Deploy Voltha') {
+      steps {
+        installVoltctl("${release}")
+        deploy_voltha_stacks(params.volthaStacks)
+      }
+    }
+    stage('Configuration') {
+      steps {
+        script {
+          sh returnStdout: false, script: """
+
+          # forward ETCD port
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG=etcd-port-forward /bin/bash -c "while true; do kubectl -n infra port-forward --address 0.0.0.0 service/etcd 9999:2379; done 2>&1 " &
+
+          # forward ONOS ports
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG=onos-port-forward /bin/bash -c "while true; do kubectl -n infra port-forward --address 0.0.0.0 service/voltha-infra-onos-classic-hs 8101:8101; done 2>&1 " &
+          JENKINS_NODE_COOKIE="dontKillMe" _TAG=onos-port-forward /bin/bash -c "while true; do kubectl -n infra port-forward --address 0.0.0.0 service/voltha-infra-onos-classic-hs 8181:8181; done 2>&1 " &
+
+          # make sure the the port-forward has started before moving forward
+          sleep 5
+          """
+          sh returnStdout: false, script: """
+          # TODO this needs to be repeated per stack
+          # kubectl exec \$(kubectl get pods | grep -E "bbsim[0-9]" | awk 'NR==1{print \$1}') -- bbsimctl log ${logLevel.toLowerCase()} false
+
+          #Setting link discovery
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled ${withLLDP}
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager allowExtraneousRules true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager importExtraneousRules true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxBatchMillis 900
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxIdleMillis 500
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.opencord.olt.impl.Olt provisionDelay 1000
+
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg log:set ${logLevel} org.onosproject
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg log:set ${logLevel} org.opencord
+
+          # Set Flows/Ports/Meters poll frequency
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.flow.impl.OpenFlowRuleProvider flowPollFrequency ${onosStatInterval}
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 cfg set org.onosproject.provider.of.device.impl.OpenFlowDeviceProvider portStatsPollFrequency ${onosStatInterval}
+
+          #SR is not needed in scale tests and not currently used by operators in production, can be disabled.
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.onosproject.segmentrouting
+
+
+          if [ ${withFlows} = false ]; then
+            sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 app deactivate org.opencord.olt
+          fi
+          """
+        }
+      }
+    }
+    stage('Setup Test') {
+      steps {
+        sh '''
+          mkdir -p $WORKSPACE/RobotLogs
+          cd $WORKSPACE/voltha-system-tests
+          make vst_venv
+        '''
+      }
+    }
+    stage('Run Test') {
+      steps {
+        test_voltha_stacks(params.volthaStacks)
+      }
+    }
+  }
+  post {
+    always {
+      stopComponentsLogs([compress: true])
+      // collect result, done in the "post" step so it's executed even in the
+      // event of a timeout in the tests
+      plot([
+        csvFileName: 'scale-test.csv',
+        csvSeries: [
+          [file: 'plots/plot-voltha-onus.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-ports.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-openolt-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-auth.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-openolt-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-dhcp.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+        ],
+        group: 'Voltha-Scale-Numbers', numBuilds: '20', style: 'line', title: "Scale Test (Stacks: ${params.volthaStacks}, OLTs: ${olts}, PONs: ${pons}, ONUs: ${onus})", yaxis: 'Time (s)', useDescr: true
+      ])
+      step([$class: 'RobotPublisher',
+        disableArchiveOutput: false,
+        logFileName: 'RobotLogs/**/log.html',
+        otherFiles: '',
+        outputFileName: 'RobotLogs/**/output.xml',
+        outputPath: '.',
+        passThreshold: 100,
+        reportFileName: 'RobotLogs/**/report.html',
+        onlyCritical: true,
+        unstableThreshold: 0]);
+      // get all the logs from kubernetes PODs
+      sh returnStdout: false, script: '''
+
+        # store information on running charts
+        helm ls --all-namespaces > $LOG_FOLDER/helm-list.txt || true
+
+        # store information on the running pods
+        kubectl get pods --all-namespaces -o wide > $LOG_FOLDER/pods.txt || true
+        kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-images.txt || true
+        kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq | tee $LOG_FOLDER/pod-imagesId.txt || true
+
+        # copy the ONOS logs directly from the container to avoid the color codes
+        printf '%s\n' $(kubectl get pods -n infra -l app=onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs --no-run-if-empty -I# bash -c "kubectl cp -n infra #:${karafHome}/data/log/karaf.log $LOG_FOLDER/#.log" || true
+
+      '''
+      // dump all the BBSim(s) ONU information
+      script {
+        for (int i = 1; i <= params.volthaStacks.toInteger(); i++) {
+          stack_ns="voltha"+i
+          sh """
+          mkdir -p \$LOG_FOLDER/${stack_ns}
+          BBSIM_IDS=\$(kubectl -n ${stack_ns} get pods | grep bbsim | grep -v server | awk '{print \$1}')
+          IDS=(\$BBSIM_IDS)
+
+          for bbsim in "\${IDS[@]}"
+          do
+            kubectl -n ${stack_ns} exec -t \$bbsim -- bbsimctl onu list > \$LOG_FOLDER/${stack_ns}/\$bbsim-device-list.txt || true
+            kubectl -n ${stack_ns} exec -t \$bbsim -- bbsimctl service list > \$LOG_FOLDER/${stack_ns}/\$bbsim-service-list.txt || true
+            kubectl -n ${stack_ns} exec -t \$bbsim -- bbsimctl olt resources GEM_PORT > \$LOG_FOLDER/${stack_ns}/\$bbsim-flows-gem-ports.txt || true
+            kubectl -n ${stack_ns} exec -t \$bbsim -- bbsimctl olt resources ALLOC_ID > \$LOG_FOLDER/${stack_ns}/\$bbsim-flows-alloc-ids.txt || true
+            kubectl -n ${stack_ns} exec -t \$bbsim -- bbsimctl olt pons > \$LOG_FOLDER/${stack_ns}/\$bbsim-pon-resources.txt || true
+          done
+          """
+        }
+      }
+      // get ONOS debug infos
+      sh '''
+
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 apps -a -s > $LOG_FOLDER/onos-apps.txt || true
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 nodes > $LOG_FOLDER/onos-nodes.txt || true
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 masters > $LOG_FOLDER/onos-masters.txt || true
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 roles > $LOG_FOLDER/onos-roles.txt || true
+
+        sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 netcfg > $LOG_FOLDER/onos-netcfg.txt || true
+        sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg get > $LOG_FOLDER/onos-cfg.txt || true
+
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 ports > $LOG_FOLDER/onos-ports-list.txt || true
+        sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 hosts > $LOG_FOLDER/onos-hosts-list.txt || true
+
+        if [ ${withFlows} = true ] ; then
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-olts > $LOG_FOLDER/onos-olt-list.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 flows -s > $LOG_FOLDER/onos-flows-list.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 meters > $LOG_FOLDER/onos-meters-list.txt || true
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-port-status > $LOG_FOLDER/onos-volt-port-status.txt || true
+        fi
+
+        if [ ${provisionSubscribers} = true ]; then
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-subscribers > $LOG_FOLDER/onos-programmed-subscribers.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-programmed-meters > $LOG_FOLDER/onos-programmed-meters.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-bpmeter-mappings > $LOG_FOLDER/onos-bpmeter-mappings.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 volt-failed-subscribers > $LOG_FOLDER/onos-failed-subscribers.txt || true
+        fi
+
+        if [ ${withEapol} = true ] ; then
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-users > $LOG_FOLDER/onos-aaa-users.txt || true
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 aaa-statistics > $LOG_FOLDER/onos-aaa-statistics.txt || true
+        fi
+
+        if [ ${withDhcp} = true ] ; then
+          sshpass -e ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 8101 karaf@127.0.0.1 dhcpl2relay-allocations > $LOG_FOLDER/onos-dhcp-allocations.txt || true
+        fi
+      '''
+      // collect etcd metrics
+      sh '''
+        mkdir -p $WORKSPACE/etcd-metrics
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_keys_total' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-key-count.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=grpc_server_handled_total{grpc_service="etcdserverpb.KV"}' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-rpc-count.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_db_total_size_in_bytes' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-db-size.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data'  > $WORKSPACE/etcd-metrics/etcd-backend-write-time.json || true
+      '''
+      // get VOLTHA debug infos
+      script {
+        for (int i = 1; i <= params.volthaStacks.toInteger(); i++) {
+          stack_ns="voltha"+i
+          voltcfg="~/.volt/config-voltha"+i
+          try {
+            sh """
+
+            # _TAG=voltha-port-forward kubectl port-forward --address 0.0.0.0 -n voltha${i} svc/voltha${i}-voltha-api 55555:55555& > /dev/null 2>&1
+            _TAG="voltha-port-forward" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n voltha${i} svc/voltha${i}-voltha-api 55555:55555 > /dev/null 2>&1; done"&
+
+            voltctl -m 32MB device list -o json > $LOG_FOLDER/${stack_ns}/device-list.json || true
+            python -m json.tool $LOG_FOLDER/${stack_ns}/device-list.json > $LOG_FOLDER/${stack_ns}/voltha-devices-list.json || true
+            rm $LOG_FOLDER/${stack_ns}/device-list.json || true
+            voltctl -m 32MB device list > $LOG_FOLDER/${stack_ns}/voltha-devices-list.txt || true
+
+            DEVICE_LIST=
+            printf '%s\n' \$(voltctl -m 32MB device list | grep olt | awk '{print \$1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 32MB device flows # > $LOG_FOLDER/${stack_ns}/voltha-device-flows-#.txt" || true
+            printf '%s\n' \$(voltctl -m 32MB device list | grep olt | awk '{print \$1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 32MB device port list --format 'table{{.PortNo}}\t{{.Label}}\t{{.Type}}\t{{.AdminState}}\t{{.OperStatus}}' # > $LOG_FOLDER/${stack_ns}/voltha-device-ports-#.txt" || true
+
+            printf '%s\n' \$(voltctl -m 32MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 32MB logicaldevice flows # > $LOG_FOLDER/${stack_ns}/voltha-logicaldevice-flows-#.txt" || true
+            printf '%s\n' \$(voltctl -m 32MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 32MB logicaldevice port list # > $LOG_FOLDER/${stack_ns}/voltha-logicaldevice-ports-#.txt" || true
+
+            # remove VOLTHA port-forward
+            ps aux | grep port-forw | grep voltha-api | grep -v grep | awk '{print \$2}' | xargs --no-run-if-empty kill -9 || true
+            """
+          } catch(e) {
+            println e
+            sh '''
+            echo "Can't get device list from voltctl"
+            '''
+          }
+        }
+      }
+      // get cpu usage by container
+      sh '''
+      if [ ${withMonitoring} = true ] ; then
+        cd $WORKSPACE/voltha-system-tests
+        source ./vst_venv/bin/activate
+        sleep 60 # we have to wait for prometheus to collect all the information
+        python scripts/sizing.py -o $WORKSPACE/plots || true
+      fi
+      '''
+      archiveArtifacts artifacts: 'kind-voltha/install-*.log,execution-time-*.txt,logs/**/*.txt,logs/**/*.tar.gz,logs/**/*.tgz,RobotLogs/**/*,plots/*,etcd-metrics/*'
+    }
+  }
+}
+
+def deploy_voltha_stacks(numberOfStacks) {
+  for (int i = 1; i <= numberOfStacks.toInteger(); i++) {
+    timeout(time: 5, unit: 'MINUTES') {
+      stage("Deploy VOLTHA stack " + i) {
+
+        def localCharts = false
+        if (volthaHelmChartsChange != "" || release != "master") {
+          localCharts = true
+        }
+
+        def volthaHelmFlags =
+                "--set global.log_level=${logLevel} " +
+                "--set enablePerf=true,onu=${onus},pon=${pons} " +
+                "--set securityContext.enabled=false " +
+                params.extraHelmFlags
+
+        volthaStackDeploy([
+          bbsimReplica: olts.toInteger(),
+          infraNamespace: "infra",
+          volthaNamespace: "voltha${i}",
+          stackName: "voltha${i}",
+          stackId: i,
+          workflow: workflow,
+          extraHelmFlags: volthaHelmFlags,
+          localCharts: localCharts,
+          onosReplica: onosReplicas,
+        ])
+      }
+    }
+  }
+}
+
+def test_voltha_stacks(numberOfStacks) {
+  for (int i = 1; i <= numberOfStacks.toInteger(); i++) {
+    stage("Test VOLTHA stack " + i) {
+      timeout(time: 15, unit: 'MINUTES') {
+        sh """
+
+        # we are restarting the voltha-api port-forward for each stack, no need to have a different voltconfig file
+        voltctl -s 127.0.0.1:55555 config > $HOME/.volt/config
+        export VOLTCONFIG=$HOME/.volt/config
+
+        # _TAG=voltha-port-forward kubectl port-forward --address 0.0.0.0 -n voltha${i} svc/voltha${i}-voltha-api 55555:55555& > /dev/null 2>&1
+        _TAG="voltha-port-forward" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n voltha${i} svc/voltha${i}-voltha-api 55555:55555 > /dev/null 2>&1; done"&
+
+        # wait a bit to make sure the port-forwarding has started
+        sleep 5
+
+
+          ROBOT_PARAMS="-v stackId:${i} \
+            -v olt:${olts} \
+            -v pon:${pons} \
+            -v onu:${onus} \
+            -v workflow:${workflow} \
+            -v withEapol:${withEapol} \
+            -v withDhcp:${withDhcp} \
+            -v withIgmp:${withIgmp} \
+            --noncritical non-critical \
+            -e igmp \
+            -e onu-upgrade \
+            -e teardown "
+
+          if [ ${withEapol} = false ] ; then
+            ROBOT_PARAMS+="-e authentication "
+          fi
+
+          if [ ${withDhcp} = false ] ; then
+            ROBOT_PARAMS+="-e dhcp "
+          fi
+
+          if [ ${provisionSubscribers} = false ] ; then
+            # if we're not considering subscribers then we don't care about authentication and dhcp
+            ROBOT_PARAMS+="-e authentication -e provision -e flow-after -e dhcp "
+          fi
+
+          if [ ${withFlows} = false ] ; then
+            ROBOT_PARAMS+="-i setup -i activation "
+          fi
+
+          cd $WORKSPACE/voltha-system-tests
+          source ./vst_venv/bin/activate
+          robot -d $WORKSPACE/RobotLogs/voltha${i} \
+          \$ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
+
+          # collect results
+          python tests/scale/collect-result.py -r $WORKSPACE/RobotLogs/voltha${i}/output.xml -p $WORKSPACE/plots > $WORKSPACE/execution-time-voltha${i}.txt || true
+          cat $WORKSPACE/execution-time-voltha${i}.txt
+        """
+        sh """
+          # remove VOLTHA port-forward
+          ps aux | grep port-forw | grep voltha-api | grep -v grep | awk '{print \$2}' | xargs --no-run-if-empty kill -9 2>&1 > /dev/null || true
+        """
+      }
+    }
+  }
+}
diff --git a/jjb/pipeline/voltha/playground/voltha-scale-test.groovy b/jjb/pipeline/voltha/playground/voltha-scale-test.groovy
new file mode 100644
index 0000000..88d6070
--- /dev/null
+++ b/jjb/pipeline/voltha/playground/voltha-scale-test.groovy
@@ -0,0 +1,933 @@
+// Copyright 2019-2023 Open Networking Foundation (ONF) and the ONF Contributors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// deploy VOLTHA and performs a scale test
+
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+// this function generates the correct parameters for ofAgent
+// to connect to multiple ONOS instances
+def ofAgentConnections(numOfOnos, releaseName, namespace) {
+    def params = " "
+    numOfOnos.times {
+        params += "--set voltha.services.controller[${it}].address=${releaseName}-onos-classic-${it}.${releaseName}-onos-classic-hs.${namespace}.svc:6653 "
+    }
+    return params
+}
+
+pipeline {
+
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+      timeout(time: 60, unit: 'MINUTES')
+  }
+  environment {
+    JENKINS_NODE_COOKIE="dontKillMe" // do not kill processes after the build is done
+    KUBECONFIG="$HOME/.kube/config"
+    VOLTCONFIG="$HOME/.volt/config"
+    SSHPASS="karaf"
+    VOLTHA_LOG_LEVEL="${logLevel}"
+    NUM_OF_BBSIM="${olts}"
+    NUM_OF_OPENONU="${openonuAdapterReplicas}"
+    NUM_OF_ONOS="${onosReplicas}"
+    NUM_OF_ATOMIX="${atomixReplicas}"
+    EXTRA_HELM_FLAGS=" "
+    LOG_FOLDER="$WORKSPACE/logs"
+    GERRIT_PROJECT="${GERRIT_PROJECT}"
+    PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+  }
+
+  stages {
+    stage ('Cleanup') {
+      steps {
+        script {
+          try {
+            timeout(time: 5, unit: 'MINUTES') {
+              sh returnStdout: false, script: '''
+              cd $WORKSPACE
+              rm -rf $WORKSPACE/*
+              '''
+              // removing the voltha-infra chart first
+              // if we don't ONOS might get stuck because of all the events when BBSim goes down
+              sh returnStdout: false, script: '''
+              set +x
+              helm del voltha-infra || true
+              echo -ne "\nWaiting for ONOS to be removed..."
+              onos=$(kubectl get pod -n default -l app=onos-classic --no-headers | wc -l)
+              while [[ $onos != 0 ]]; do
+                onos=$(kubectl get pod -n default -l app=onos-classic --no-headers | wc -l)
+                sleep 5
+                echo -ne "."
+              done
+              '''
+            }
+          } catch(org.jenkinsci.plugins.workflow.steps.FlowInterruptedException e) {
+            // if we have a timeout in the Cleanup fase most likely ONOS got stuck somewhere, thuse force remove the pods
+            sh '''
+              kubectl get pods | grep Terminating | awk '{print $1}' | xargs kubectl delete pod --force --grace-period=0
+            '''
+          }
+          timeout(time: 10, unit: 'MINUTES') {
+            script {
+              helmTeardown(["default", "voltha1", "infra"])
+            }
+            sh returnStdout: false, script: '''
+              helm repo add onf https://charts.opencord.org
+              helm repo update
+
+              # remove all persistent volume claims
+              kubectl delete pvc --all-namespaces --all
+              PVCS=\$(kubectl get pvc --all-namespaces --no-headers | wc -l)
+              while [[ \$PVCS != 0 ]]; do
+                sleep 5
+                PVCS=\$(kubectl get pvc --all-namespaces --no-headers | wc -l)
+              done
+
+              # remove orphaned port-forward from different namespaces
+              ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
+            '''
+          }
+        }
+      }
+    }
+    stage('Download Code') {
+      steps {
+        getVolthaCode([
+          branch: "${release}",
+          volthaSystemTestsChange: "${volthaSystemTestsChange}",
+          volthaHelmChartsChange: "${volthaHelmChartsChange}",
+        ])
+      }
+    }
+    stage('Build patch') {
+      when {
+        expression {
+          return params.GERRIT_PROJECT
+        }
+      }
+      steps {
+        sh """
+        git clone https://\$GERRIT_HOST/\$GERRIT_PROJECT
+        cd \$GERRIT_PROJECT
+        git fetch https://\$GERRIT_HOST/\$GERRIT_PROJECT \$GERRIT_REFSPEC && git checkout FETCH_HEAD
+
+        DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-build
+        DOCKER_REGISTRY=${dockerRegistry}/ DOCKER_REPOSITORY=voltha/ DOCKER_TAG=voltha-scale make docker-push
+        """
+      }
+    }
+    stage('Deploy common infrastructure') {
+      steps {
+        sh '''
+        if [ ${withMonitoring} = true ] ; then
+          helm install nem-monitoring onf/nem-monitoring \
+          -f $HOME/voltha-scale/grafana.yaml \
+          --set prometheus.alertmanager.enabled=false,prometheus.pushgateway.enabled=false \
+          --set kpi_exporter.enabled=false,dashboards.xos=false,dashboards.onos=false,dashboards.aaa=false,dashboards.voltha=false
+        fi
+        '''
+      }
+    }
+    stage('Deploy Voltha') {
+      steps {
+        timeout(time: 10, unit: 'MINUTES') {
+          installVoltctl("${release}")
+          script {
+            startComponentsLogs([
+              appsToLog: [
+                'app.kubernetes.io/name=etcd',
+                'app.kubernetes.io/name=kafka',
+                'app=voltha-infra-atomix',
+                'app=onos-classic',
+                'app=adapter-open-onu',
+                'app=adapter-open-olt',
+                'app=rw-core',
+                'app=ofagent',
+                'app=bbsim',
+                'app=radius',
+                'app=bbsim-sadis-server',
+                'app=onos-config-loader',
+              ]
+            ])
+            def returned_flags = sh (returnStdout: true, script: """
+
+              export EXTRA_HELM_FLAGS+=' '
+
+              # BBSim custom image handling
+              if [ '${bbsimImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'bbsim' ]; then
+                IFS=: read -r bbsimRepo bbsimTag <<< '${bbsimImg.trim()}'
+                EXTRA_HELM_FLAGS+="--set images.bbsim.repository=\$bbsimRepo,images.bbsim.tag=\$bbsimTag "
+              fi
+
+              # VOLTHA custom image handling
+              if [ '${rwCoreImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-go' ]; then
+                IFS=: read -r rwCoreRepo rwCoreTag <<< '${rwCoreImg.trim()}'
+                EXTRA_HELM_FLAGS+="--set voltha.images.rw_core.repository=\$rwCoreRepo,voltha.images.rw_core.tag=\$rwCoreTag "
+              fi
+
+              # ofAgent custom image handling
+              if [ '${ofAgentImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'of-agent' ]; then
+                IFS=: read -r ofAgentRepo ofAgentTag <<< '${ofAgentImg.trim()}'
+                EXTRA_HELM_FLAGS+="--set voltha.images.ofagent.repository=\$ofAgentRepo,voltha.images.ofagent.tag=\$ofAgentTag "
+              fi
+
+              # OpenOLT custom image handling
+              if [ '${openoltAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openolt-adapter' ]; then
+                IFS=: read -r openoltAdapterRepo openoltAdapterTag <<< '${openoltAdapterImg.trim()}'
+                EXTRA_HELM_FLAGS+="--set voltha-adapter-openolt.images.adapter_open_olt.repository=\$openoltAdapterRepo,voltha-adapter-openolt.images.adapter_open_olt.tag=\$openoltAdapterTag "
+              fi
+
+              # OpenONU custom image handling
+              if [ '${openonuAdapterImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter' ]; then
+                IFS=: read -r openonuAdapterRepo openonuAdapterTag <<< '${openonuAdapterImg.trim()}'
+                EXTRA_HELM_FLAGS+="--set voltha-adapter-openonu.images.adapter_open_onu.repository=\$openonuAdapterRepo,voltha-adapter-openonu.images.adapter_open_onu.tag=\$openonuAdapterTag "
+              fi
+
+              # OpenONU GO custom image handling
+              if [ '${openonuAdapterGoImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-openonu-adapter-go' ]; then
+                IFS=: read -r openonuAdapterGoRepo openonuAdapterGoTag <<< '${openonuAdapterGoImg.trim()}'
+                EXTRA_HELM_FLAGS+="--set voltha-adapter-openonu.images.adapter_open_onu_go.repository=\$openonuAdapterGoRepo,voltha-adapter-openonu.images.adapter_open_onu_go.tag=\$openonuAdapterGoTag "
+              fi
+
+              # ONOS custom image handling
+              if [ '${onosImg.trim()}' != '' ] && [ '\$GERRIT_PROJECT' != 'voltha-onos' ]; then
+                IFS=: read -r onosRepo onosTag <<< '${onosImg.trim()}'
+                EXTRA_HELM_FLAGS+="--set onos-classic.image.repository=\$onosRepo,onos-classic.image.tag=\$onosTag "
+              fi
+
+              # set BBSim parameters
+              EXTRA_HELM_FLAGS+='--set enablePerf=true,pon=${pons},onu=${onus},uni=${unis} '
+
+              # disable the securityContext, this is a development cluster
+              EXTRA_HELM_FLAGS+='--set securityContext.enabled=false '
+
+              # No persistent-volume-claims in Atomix
+              EXTRA_HELM_FLAGS+="--set onos-classic.atomix.persistence.enabled=false "
+
+              # Use custom built images
+
+              if [ '\$GERRIT_PROJECT' == 'voltha-go' ]; then
+                EXTRA_HELM_FLAGS+="--set voltha.images.rw_core.repository=${dockerRegistry}/voltha/voltha-rw-core,voltha.images.rw_core.tag=voltha-scale "
+              fi
+
+              if [ '\$GERRIT_PROJECT' == 'voltha-openolt-adapter' ]; then
+                EXTRA_HELM_FLAGS+="--set voltha-openolt-adapter.images.adapter_open_olt.repository=${dockerRegistry}/voltha/voltha-openolt-adapter,voltha-openolt-adapter.images.adapter_open_olt.tag=voltha-scale "
+              fi
+
+              if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter' ]; then
+                EXTRA_HELM_FLAGS+="--set voltha-openonu-adapter.images.adapter_open_onu.repository=${dockerRegistry}/voltha/voltha-openonu-adapter,voltha-openonu-adapter.images.adapter_open_onu.tag=voltha-scale "
+              fi
+
+              if [ '\$GERRIT_PROJECT' == 'voltha-openonu-adapter-go' ]; then
+                EXTRA_HELM_FLAGS+="--set voltha-openonu-adapter-go.images.adapter_open_onu_go.repository=${dockerRegistry}/voltha/voltha-openonu-adapter-go,voltha-openonu-adapter-go.images.adapter_open_onu_go.tag=voltha-scale "
+              fi
+
+              if [ '\$GERRIT_PROJECT' == 'ofagent-go' ]; then
+                EXTRA_HELM_FLAGS+="--set voltha.images.ofagent.repository=${dockerRegistry}/voltha/voltha-ofagent-go,ofagent-go.images.ofagent.tag=voltha-scale "
+              fi
+
+              if [ '\$GERRIT_PROJECT' == 'voltha-onos' ]; then
+                EXTRA_HELM_FLAGS+="--set onos-classic.image.repository=${dockerRegistry}/voltha/voltha-onos,onos-classic.image.tag=voltha-scale "
+              fi
+
+              if [ '\$GERRIT_PROJECT' == 'bbsim' ]; then
+                EXTRA_HELM_FLAGS+="--set images.bbsim.repository=${dockerRegistry}/voltha/bbsim,images.bbsim.tag=voltha-scale "
+              fi
+              echo \$EXTRA_HELM_FLAGS
+
+            """).trim()
+
+            def extraHelmFlags = returned_flags
+            // The added space before params.extraHelmFlags is required due to the .trim() above
+            def infraHelmFlags =
+              "--set global.log_level=${logLevel} " +
+              "--set radius.enabled=${withEapol} " +
+              "--set onos-classic.onosSshPort=30115 " +
+              "--set onos-classic.onosApiPort=30120 " +
+              extraHelmFlags + " " + params.extraHelmFlags
+
+            println "Passing the following parameters to the VOLTHA infra deploy: ${infraHelmFlags}."
+
+            def localCharts = false
+            if (volthaHelmChartsChange != "") {
+              localCharts = true
+            }
+
+            volthaInfraDeploy([
+              workflow: workflow,
+              infraNamespace: "default",
+              extraHelmFlags: infraHelmFlags,
+              localCharts: localCharts,
+              onosReplica: onosReplicas,
+              atomixReplica: atomixReplicas,
+              kafkaReplica: kafkaReplicas,
+              etcdReplica: etcdReplicas,
+            ])
+
+            stackHelmFlags = " --set onu=${onus},pon=${pons},uni=${unis} --set global.log_level=${logLevel.toLowerCase()} "
+            stackHelmFlags += " --set voltha.ingress.enabled=true --set voltha.ingress.enableVirtualHosts=true --set voltha.fullHostnameOverride=voltha.scale1.dev "
+            stackHelmFlags += extraHelmFlags + " " + params.extraHelmFlags
+
+            volthaStackDeploy([
+              bbsimReplica: olts.toInteger(),
+              infraNamespace: "default",
+              volthaNamespace: "default",
+              stackName: "voltha1", // TODO support custom charts
+              workflow: workflow,
+              extraHelmFlags: stackHelmFlags,
+              localCharts: localCharts,
+              onosReplica: onosReplicas,
+            ])
+            sh """
+              set +x
+
+              echo -ne "\nWaiting for VOLTHA and ONOS to start..."
+              voltha=\$(kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l)
+              onos=\$(kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l)
+              while [[ \$voltha != 0 || \$onos != 0 ]]; do
+                sleep 5
+                echo -ne "."
+                voltha=\$(kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l)
+                onos=\$(kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l)
+              done
+              echo -ne "\nVOLTHA and ONOS pods ready\n"
+              kubectl get pods --all-namespaces -l app.kubernetes.io/part-of=voltha --no-headers | grep "0/" | wc -l
+              kubectl get pods --all-namespaces -l app=onos-classic --no-headers | grep "0/" | wc -l
+            """
+            start_port_forward(olts)
+          }
+        }
+      }
+    }
+    stage('Configuration') {
+      steps {
+        script {
+          setOnosLogLevels([
+              onosNamespace: "default",
+              apps: [
+                'org.opencord.dhcpl2relay',
+                'org.opencord.olt',
+                'org.opencord.aaa',
+                'org.opencord.maclearner',
+                'org.onosproject.net.flowobjective.impl.FlowObjectiveManager',
+                'org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager'
+              ],
+              logLevel: logLevel
+          ])
+          def tech_prof_directory = "XGS-PON"
+          sh returnStdout: false, script: """
+          #Setting link discovery
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled ${withLLDP}
+
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager allowExtraneousRules true
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flow.impl.FlowRuleManager importExtraneousRules true
+
+
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxBatchMillis 900
+
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager accumulatorMaxIdleMillis 500
+
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.opencord.olt.impl.Olt provisionDelay 1000
+
+          # BBSim logs at debug level don't slow down the system much and are very helpful while troubleshooting
+          BBSIM_IDS=\$(kubectl get pods | grep bbsim | grep -v server | awk '{print \$1}')
+          IDS=(\$BBSIM_IDS)
+
+          for bbsim in "\${IDS[@]}"
+          do
+            kubectl exec -t \$bbsim -- bbsimctl log debug false
+          done
+
+          # Set Flows/Ports/Meters/Groups poll frequency
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.of.flow.impl.OpenFlowRuleProvider flowPollFrequency ${onosStatInterval}
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.of.device.impl.OpenFlowDeviceProvider portStatsPollFrequency ${onosStatInterval}
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.provider.of.group.impl.OpenFlowGroupProvider groupPollInterval ${onosGroupInterval}
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.FlowObjectiveManager numThreads ${flowObjWorkerThreads}
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg set org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager objectiveTimeoutMs 300000
+
+          if [ ${withFlows} = false ]; then
+            sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 app deactivate org.opencord.olt
+          fi
+
+          if [ '${workflow}' = 'tt' ]; then
+            etcd_container=\$(kubectl get pods --all-namespaces | grep etcd-0 | awk 'NR==1{print \$2}')
+            kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json
+            put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64')
+            kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json
+            put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65')
+            kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast.json
+            put_result=\$(kubectl exec -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66')
+          fi
+
+          if [ ${withPcap} = true ] ; then
+            # Start the tcp-dump in ofagent
+            export OF_AGENT=\$(kubectl get pods -l app=ofagent -o name)
+            kubectl exec \$OF_AGENT -- apk update
+            kubectl exec \$OF_AGENT -- apk add tcpdump
+            _TAG=ofagent-tcpdump kubectl exec \$OF_AGENT -- tcpdump -nei eth0 -w out.pcap&
+
+            # Start the tcp-dump in radius
+            export RADIUS=\$(kubectl get pods -l app=radius -o name)
+            kubectl exec \$RADIUS -- apt-get update
+            kubectl exec \$RADIUS -- apt-get install -y tcpdump
+            _TAG=radius-tcpdump kubectl exec \$RADIUS -- tcpdump -w out.pcap&
+
+            # Start the tcp-dump in ONOS
+            for i in \$(seq 0 \$ONOSES); do
+              INSTANCE="onos-onos-classic-\$i"
+              kubectl exec \$INSTANCE -- apt-get update
+              kubectl exec \$INSTANCE -- apt-get install -y tcpdump
+              kubectl exec \$INSTANCE -- mv /usr/sbin/tcpdump /usr/bin/tcpdump
+              _TAG=\$INSTANCE kubectl exec \$INSTANCE -- /usr/bin/tcpdump -nei eth0 port 1812 -w out.pcap&
+            done
+          fi
+          """
+        }
+      }
+    }
+    stage('Load MIB Template') {
+      when {
+        expression {
+          return params.withMibTemplate
+        }
+      }
+      steps {
+        sh """
+        # load MIB template
+        wget ${mibTemplateUrl} -O mibTemplate.json
+        cat mibTemplate.json | kubectl exec -it \$(kubectl get pods |grep etcd-0 | awk 'NR==1{print \$1}') -- etcdctl put service/voltha/omci_mibs/go_templates/BBSM/v0.0.1/BBSM_IMG_00001
+        """
+      }
+    }
+    stage('Run Test') {
+      steps {
+        sh '''
+          mkdir -p $WORKSPACE/RobotLogs
+          cd $WORKSPACE/voltha-system-tests
+          make vst_venv
+        '''
+        sh '''
+          if [ ${withProfiling} = true ] ; then
+            mkdir -p $LOG_FOLDER/pprof
+            echo $PATH
+            #Creating Python script for ONU Detection
+            cat << EOF > $WORKSPACE/pprof.sh
+timestamp() {
+  date +"%T"
+}
+
+i=0
+while [[ true ]]; do
+  ((i++))
+  ts=$(timestamp)
+  go tool pprof -png http://127.0.0.1:6060/debug/pprof/heap > $LOG_FOLDER/pprof/rw-core-heap-\\$i-\\$ts.png
+  go tool pprof -png http://127.0.0.1:6060/debug/pprof/goroutine > $LOG_FOLDER/pprof/rw-core-goroutine-\\$i-\\$ts.png
+  curl -o $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof http://127.0.0.1:6060/debug/pprof/profile?seconds=10
+  go tool pprof -png $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/rw-core-profile-\\$i-\\$ts.png
+
+  go tool pprof -png http://127.0.0.1:6061/debug/pprof/heap > $LOG_FOLDER/pprof/openolt-heap-\\$i-\\$ts.png
+  go tool pprof -png http://127.0.0.1:6061/debug/pprof/goroutine > $LOG_FOLDER/pprof/openolt-goroutine-\\$i-\\$ts.png
+  curl -o $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof http://127.0.0.1:6061/debug/pprof/profile?seconds=10
+  go tool pprof -png $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/openolt-profile-\\$i-\\$ts.png
+
+  go tool pprof -png http://127.0.0.1:6062/debug/pprof/heap > $LOG_FOLDER/pprof/ofagent-heap-\\$i-\\$ts.png
+  go tool pprof -png http://127.0.0.1:6062/debug/pprof/goroutine > $LOG_FOLDER/pprof/ofagent-goroutine-\\$i-\\$ts.png
+  curl -o $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof http://127.0.0.1:6062/debug/pprof/profile?seconds=10
+  go tool pprof -png $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.pprof > $LOG_FOLDER/pprof/ofagent-profile-\\$i-\\$ts.png
+
+  sleep 10
+done
+EOF
+
+            _TAG="pprof"
+            _TAG=$_TAG bash $WORKSPACE/pprof.sh &
+          fi
+        '''
+        timeout(time: "${testTimeout.toInteger() + 5}", unit: 'MINUTES') {
+          sh '''
+            ROBOT_PARAMS="--exitonfailure \
+              -v olt:${olts} \
+              -v pon:${pons} \
+              -v onu:${onus} \
+              -v ONOS_SSH_PORT:30115 \
+              -v ONOS_REST_PORT:30120 \
+              -v workflow:${workflow} \
+              -v withEapol:${withEapol} \
+              -v withDhcp:${withDhcp} \
+              -v withIgmp:${withIgmp} \
+              -v timeout:${testTimeout}m \
+              -v withMaclearning:${withMaclearning} \
+              --noncritical non-critical \
+              -e onu-upgrade -e igmp -e teardown "
+
+            if [ ${withEapol} = false ] ; then
+              ROBOT_PARAMS+="-e authentication "
+            fi
+
+            if [ ${withDhcp} = false ] ; then
+              ROBOT_PARAMS+="-e dhcp "
+            fi
+
+            if [ ${provisionSubscribers} = false ] ; then
+              # if we're not considering subscribers then we don't care about authentication and dhcp
+              ROBOT_PARAMS+="-e authentication -e provision -e flow-after -e dhcp "
+            fi
+
+            if [ ${withFlows} = false ] ; then
+              ROBOT_PARAMS+="-i setup -i activation "
+            fi
+
+            if [ ${withOnuUpgrade} = true ] ; then
+              ROBOT_PARAMS+="-e flow-before "
+            fi
+
+            cd $WORKSPACE/voltha-system-tests
+            source ./vst_venv/bin/activate
+            robot -d $WORKSPACE/RobotLogs \
+            $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
+
+            python tests/scale/collect-result.py -r $WORKSPACE/RobotLogs/output.xml -p $WORKSPACE/plots > $WORKSPACE/execution-time.txt || true
+            cat $WORKSPACE/execution-time.txt
+          '''
+        }
+      }
+    }
+    stage('Run ONU Upgrade Tests') {
+      environment {
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/OnuUpgradeTests"
+      }
+      when {
+        expression {
+          return params.withOnuUpgrade
+        }
+      }
+      options {
+          timeout(time: "${testTimeout.toInteger() + 1}", unit: 'MINUTES')
+      }
+      steps {
+        sh '''
+          set +e
+          mkdir -p $ROBOT_LOGS_DIR
+          cd $WORKSPACE/voltha-system-tests
+          make vst_venv
+        '''
+        script {
+          Exception caughtException = null
+
+          catchError(buildResult: 'SUCCESS', stageResult: 'ABORTED') {
+            try {
+              sh '''
+                ROBOT_PARAMS="--exitonfailure \
+                  -v olt:${olts} \
+                  -v pon:${pons} \
+                  -v onu:${onus} \
+                  -v workflow:${workflow} \
+                  -v withEapol:${withEapol} \
+                  -v withDhcp:${withDhcp} \
+                  -v withIgmp:${withIgmp} \
+                  -v timeout:${testTimeout}m \
+                  -v withMaclearning:${withMaclearning}
+                  -v image_version:BBSM_IMG_00002 \
+                  -v image_url:http://bbsim0:50074/images/software-image.img \
+                  -v image_vendor:BBSM \
+                  -v image_activate_on_success:false \
+                  -v image_commit_on_success:false \
+                  -v image_crc:0 \
+                  -v ONOS_SSH_PORT:30115 \
+                  -v ONOS_REST_PORT:30120 \
+                  --noncritical non-critical \
+                  -i onu-upgrade \
+                  -e setup -e activation -e flow-before \
+                  -e authentication -e provision -e flow-after \
+                  -e dhcp -e igmp -e teardown "
+                cd $WORKSPACE/voltha-system-tests
+                source ./vst_venv/bin/activate
+                robot -d $ROBOT_LOGS_DIR \
+                $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
+              '''
+            } catch (org.jenkinsci.plugins.workflow.steps.FlowInterruptedException e) {
+              // if the error is a timeout don't mark the build as failed
+              println "ONU Upgrade test timed out"
+            } catch (Throwable e) {
+              caughtException = e
+            }
+          }
+
+          if (caughtException) {
+            error caughtException.message
+          }
+        }
+      }
+    }
+    stage('Run Igmp Tests') {
+      environment {
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/IgmpTests"
+      }
+      when {
+        expression {
+          return params.withIgmp
+        }
+      }
+      options {
+          timeout(time: "${testTimeout.toInteger() + 1}", unit: 'MINUTES')
+      }
+      steps {
+        sh returnStdout: false, script: """
+          # sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 log:set DEBUG org.onosproject.store.group.impl
+        """
+        sh '''
+          set +e
+          mkdir -p $ROBOT_LOGS_DIR
+          cd $WORKSPACE/voltha-system-tests
+          make vst_venv
+        '''
+        script {
+          Exception caughtException = null
+
+          catchError(buildResult: 'SUCCESS', stageResult: 'ABORTED') {
+            try {
+              sh '''
+                ROBOT_PARAMS="--exitonfailure \
+                  -v olt:${olts} \
+                  -v pon:${pons} \
+                  -v onu:${onus} \
+                  -v workflow:${workflow} \
+                  -v withEapol:${withEapol} \
+                  -v withDhcp:${withDhcp} \
+                  -v withIgmp:${withIgmp} \
+                  -v timeout:${testTimeout}m \
+                  -v withMaclearning:${withMaclearning}
+                  -v ONOS_SSH_PORT:30115 \
+                  -v ONOS_REST_PORT:30120 \
+                  --noncritical non-critical \
+                  -i igmp \
+                  -e setup -e activation -e flow-before \
+                  -e authentication -e provision -e flow-after \
+                  -e dhcp -e onu-upgrade -e teardown "
+                cd $WORKSPACE/voltha-system-tests
+                source ./vst_venv/bin/activate
+                robot -d $ROBOT_LOGS_DIR \
+                $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
+              '''
+            } catch (org.jenkinsci.plugins.workflow.steps.FlowInterruptedException e) {
+              // if the error is a timeout don't mark the build as failed
+              println "IGMP test timed out"
+            } catch (Throwable e) {
+              caughtException = e
+            }
+          }
+
+          if (caughtException) {
+            error caughtException.message
+          }
+        }
+      }
+    }
+    stage("Device removal") {
+      options {
+          timeout(time: "${testTimeout.toInteger() + 5}", unit: 'MINUTES')
+      }
+      steps {
+        sh '''
+          set +e
+          mkdir -p $ROBOT_LOGS_DIR
+          cd $WORKSPACE/voltha-system-tests
+          make vst_venv
+        '''
+        script {
+          Exception caughtException = null
+
+          catchError(buildResult: 'SUCCESS', stageResult: 'ABORTED') {
+            try {
+              sh '''
+                ROBOT_PARAMS="--exitonfailure \
+                  -v olt:${olts} \
+                  -v pon:${pons} \
+                  -v onu:${onus} \
+                  -v ONOS_SSH_PORT:30115 \
+                  -v ONOS_REST_PORT:30120 \
+                  -v workflow:${workflow} \
+                  -v withEapol:${withEapol} \
+                  -v withDhcp:${withDhcp} \
+                  -v withIgmp:${withIgmp} \
+                  -v timeout:${testTimeout}m \
+                  -v withMaclearning:${withMaclearning} \
+                  --noncritical non-critical \
+                  -i teardown"
+
+                  cd $WORKSPACE/voltha-system-tests
+                  source ./vst_venv/bin/activate
+                  robot -d $WORKSPACE/RobotLogs \
+                  $ROBOT_PARAMS tests/scale/Voltha_Scale_Tests.robot
+                '''
+            } catch (org.jenkinsci.plugins.workflow.steps.FlowInterruptedException e) {
+              // if the error is a timeout don't mark the build as failed
+              println "Cleanup test timed out"
+            } catch (Throwable e) {
+              caughtException = e
+            }
+          }
+        }
+      }
+    }
+  }
+  post {
+    always {
+      stopComponentsLogs()
+      // collect result, done in the "post" step so it's executed even in the
+      // event of a timeout in the tests
+      sh '''
+        if [ ${withPcap} = true ] ; then
+          # stop ofAgent tcpdump
+          P_ID="\$(ps e -ww -A | grep "_TAG=ofagent-tcpdump" | grep -v grep | awk '{print \$1}')"
+          if [ -n "\$P_ID" ]; then
+            kill -9 \$P_ID
+          fi
+
+          # stop radius tcpdump
+          P_ID="\$(ps e -ww -A | grep "_TAG=radius-tcpdump" | grep -v grep | awk '{print \$1}')"
+          if [ -n "\$P_ID" ]; then
+            kill -9 \$P_ID
+          fi
+
+          # stop onos tcpdump
+          LIMIT=$(($NUM_OF_ONOS - 1))
+          for i in $(seq 0 $LIMIT); do
+            INSTANCE="onos-onos-classic-$i"
+            P_ID="\$(ps e -ww -A | grep "_TAG=$INSTANCE" | grep -v grep | awk '{print \$1}')"
+            if [ -n "\$P_ID" ]; then
+              kill -9 \$P_ID
+            fi
+          done
+
+          # copy the file
+          export OF_AGENT=$(kubectl get pods -l app=ofagent | awk 'NR==2{print $1}') || true
+          kubectl cp $OF_AGENT:out.pcap $LOG_FOLDER/ofagent.pcap || true
+
+          export RADIUS=$(kubectl get pods -l app=radius | awk 'NR==2{print $1}') || true
+          kubectl cp $RADIUS:out.pcap $LOG_FOLDER/radius.pcap || true
+
+          LIMIT=$(($NUM_OF_ONOS - 1))
+          for i in $(seq 0 $LIMIT); do
+            INSTANCE="onos-onos-classic-$i"
+            kubectl cp $INSTANCE:out.pcap $LOG_FOLDER/$INSTANCE.pcap || true
+          done
+        fi
+      '''
+      sh '''
+        if [ ${withProfiling} = true ] ; then
+          _TAG="pprof"
+          P_IDS="$(ps e -ww -A | grep "_TAG=$_TAG" | grep -v grep | awk '{print $1}')"
+          if [ -n "$P_IDS" ]; then
+            echo $P_IDS
+            for P_ID in $P_IDS; do
+              kill -9 $P_ID
+            done
+          fi
+        fi
+      '''
+      plot([
+        csvFileName: 'scale-test.csv',
+        csvSeries: [
+          [file: 'plots/plot-voltha-onus.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-ports.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-openolt-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-flows-before.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-auth.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-voltha-openolt-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-flows-after.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+          [file: 'plots/plot-onos-dhcp.txt', displayTableFlag: false, exclusionValues: '', inclusionFlag: 'OFF', url: ''],
+        ],
+        group: 'Voltha-Scale-Numbers', numBuilds: '20', style: 'line', title: "Scale Test (OLTs: ${olts}, PONs: ${pons}, ONUs: ${onus}, UNIs: ${unis})", yaxis: 'Time (s)', useDescr: true
+      ])
+      script {
+        try {
+          step([$class: 'RobotPublisher',
+            disableArchiveOutput: false,
+            logFileName: '**/log*.html',
+            otherFiles: '',
+            outputFileName: '**/output*.xml',
+            outputPath: 'RobotLogs',
+            passThreshold: 100,
+            reportFileName: '**/report*.html',
+            onlyCritical: true,
+            unstableThreshold: 0]);
+        } catch (Exception e) {
+            println "Cannot archive Robot Logs: ${e.toString()}"
+        }
+      }
+
+      getPodsInfo("$LOG_FOLDER")
+      // get all the logs from kubernetes PODs
+      sh returnStdout: false, script: '''
+        # copy the ONOS logs directly from the container to avoid the color codes
+        printf '%s\n' $(kubectl get pods -l app=onos-classic -o=jsonpath="{.items[*]['metadata.name']}") | xargs --no-run-if-empty -I# bash -c "kubectl cp #:${karafHome}/data/log/karaf.log $LOG_FOLDER/#.log" || true
+
+        # get ONOS cfg from the 3 nodes
+        # kubectl exec -t voltha-infra-onos-classic-0 -- sh /root/onos/${karafHome}/bin/client cfg get > ~/voltha-infra-onos-classic-0-cfg.txt || true
+        # kubectl exec -t voltha-infra-onos-classic-1 -- sh /root/onos/${karafHome}/bin/client cfg get > ~/voltha-infra-onos-classic-1-cfg.txt || true
+        # kubectl exec -t voltha-infra-onos-classic-2 -- sh /root/onos/${karafHome}/bin/client cfg get > ~/voltha-infra-onos-classic-2-cfg.txt || true
+
+        # kubectl exec -t voltha-infra-onos-classic-0 -- sh /root/onos/${karafHome}/bin/client obj-next-ids > ~/voltha-infra-onos-classic-0-next-objs.txt || true
+        # kubectl exec -t voltha-infra-onos-classic-1 -- sh /root/onos/${karafHome}/bin/client obj-next-ids > ~/voltha-infra-onos-classic-1-next-objs.txt || true
+        # kubectl exec -t voltha-infra-onos-classic-2 -- sh /root/onos/${karafHome}/bin/client obj-next-ids > ~/voltha-infra-onos-classic-2-next-objs.txt || true
+
+        # get radius logs out of the container
+        kubectl cp $(kubectl get pods -l app=radius --no-headers  | awk '{print $1}'):/var/log/freeradius/radius.log $LOG_FOLDER/radius.log || true
+      '''
+      // dump all the BBSim(s) ONU information
+      sh '''
+      BBSIM_IDS=$(kubectl get pods | grep bbsim | grep -v server | awk '{print $1}')
+      IDS=($BBSIM_IDS)
+
+      for bbsim in "${IDS[@]}"
+      do
+        kubectl exec -t $bbsim -- bbsimctl onu list > $LOG_FOLDER/$bbsim-device-list.txt || true
+        kubectl exec -t $bbsim -- bbsimctl uni list > $LOG_FOLDER/$bbsim-uni-list.txt || true
+        kubectl exec -t $bbsim -- bbsimctl service list > $LOG_FOLDER/$bbsim-service-list.txt || true
+        kubectl exec -t $bbsim -- bbsimctl olt resources GEM_PORT > $LOG_FOLDER/$bbsim-flows-gem-ports.txt || true
+        kubectl exec -t $bbsim -- bbsimctl olt resources ALLOC_ID > $LOG_FOLDER/$bbsim-flows-alloc-ids.txt || true
+        kubectl exec -t $bbsim -- bbsimctl olt pons > $LOG_FOLDER/$bbsim-pon-resources.txt || true
+      done
+      '''
+      script {
+        // first make sure the port-forward is still running,
+        // sometimes Jenkins kills it regardless of the JENKINS_NODE_COOKIE=dontKillMe
+        def running = sh (
+            script: 'ps aux | grep port-forw | grep -E "onos|voltha" | grep -v grep | wc -l',
+            returnStdout: true
+        ).trim()
+        // if any of the voltha-api, onos-rest, onos-ssh port-forwards are not there
+        // kill all and restart
+        if (running != "3") {
+          start_port_forward(olts)
+        }
+      }
+      // get ONOS debug infos
+      sh '''
+
+        sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 apps -a -s > $LOG_FOLDER/onos-apps.txt
+        sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 nodes > $LOG_FOLDER/onos-nodes.txt
+        sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 masters > $LOG_FOLDER/onos-masters.txt
+        sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 roles > $LOG_FOLDER/onos-roles.txt
+        sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 cfg get > $LOG_FOLDER/onos-cfg.txt
+        sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 netcfg > $LOG_FOLDER/onos-netcfg.txt
+
+        sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 ports > $LOG_FOLDER/onos-ports-list.txt
+        sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 hosts > $LOG_FOLDER/onos-hosts-list.txt
+
+        if [ ${withFlows} = true ] ; then
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-olts > $LOG_FOLDER/onos-olt-list.txt
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 flows -s > $LOG_FOLDER/onos-flows-list.txt
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 meters > $LOG_FOLDER/onos-meters-list.txt
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-port-status > $LOG_FOLDER/onos-volt-port-status.txt
+        fi
+
+        if [ ${provisionSubscribers} = true ]; then
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-programmed-subscribers > $LOG_FOLDER/onos-programmed-subscribers.txt
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-programmed-meters > $LOG_FOLDER/onos-programmed-meters.txt
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-bpmeter-mappings > $LOG_FOLDER/onos-bpmeter-mappings.txt
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 volt-failed-subscribers > $LOG_FOLDER/onos-failed-subscribers.txt
+        fi
+
+        if [ ${withEapol} = true ] ; then
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 aaa-users > $LOG_FOLDER/onos-aaa-users.txt
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 aaa-statistics > $LOG_FOLDER/onos-aaa-statistics.txt
+        fi
+
+        if [ ${withDhcp} = true ] ; then
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 dhcpl2relay-allocations > $LOG_FOLDER/onos-dhcp-allocations.txt
+        fi
+
+        if [ ${withIgmp} = true ] ; then
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 mcast-host-routes > $LOG_FOLDER/onos-mcast-host-routes.txt
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 mcast-host-show > $LOG_FOLDER/onos-mcast-host-show.txt
+          sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 groups > $LOG_FOLDER/onos-groups.txt
+        fi
+
+        if [ ${withMaclearning} = true ] ; then
+           sshpass -e ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@127.0.0.1 mac-learner-get-mapping > $LOG_FOLDER/onos-maclearning-host-mappings.txt
+        fi
+      '''
+      // collect etcd metrics
+      sh '''
+        mkdir -p $WORKSPACE/etcd-metrics
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_keys_total' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-key-count.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=grpc_server_handled_total{grpc_service="etcdserverpb.KV"}' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-rpc-count.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_debugging_mvcc_db_total_size_in_bytes' | jq '.data' > $WORKSPACE/etcd-metrics/etcd-db-size.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data'  > $WORKSPACE/etcd-metrics/etcd-backend-write-time.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_sum' | jq '.data'  > $WORKSPACE/etcd-metrics/etcd-backend-write-time-sum.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_backend_commit_duration_seconds_bucket' | jq '.data'  > $WORKSPACE/etcd-metrics/etcd-backend-write-time-bucket.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_disk_wal_fsync_duration_seconds_bucket' | jq '.data'  > $WORKSPACE/etcd-metrics/etcd-wal-fsync-time-bucket.json || true
+        curl -s -X GET -G http://10.90.0.101:31301/api/v1/query --data-urlencode 'query=etcd_network_peer_round_trip_time_seconds_bucket' | jq '.data'  > $WORKSPACE/etcd-metrics/etcd-network-peer-round-trip-time-seconds.json || true
+        etcd_namespace=\$(kubectl get pods --all-namespaces | grep etcd-0 | awk 'NR==1{print \$1}')
+        etcd_container=\$(kubectl get pods --all-namespaces | grep etcd-0 | awk 'NR==1{print \$2}')
+        kubectl exec -it -n  \$etcd_namespace \$etcd_container -- etcdctl defrag --cluster || true
+        kubectl exec -it -n  \$etcd_namespace \$etcd_container -- etcdctl endpoint status -w table > $WORKSPACE/etcd-metrics/etcd-status-table.txt || true
+
+      '''
+      // get VOLTHA debug infos
+      script {
+        try {
+          sh '''
+          voltctl -m 32MB device list -o json > $LOG_FOLDER/device-list.json || true
+          python -m json.tool $LOG_FOLDER/device-list.json > $LOG_FOLDER/voltha-devices-list.json || true
+          rm $LOG_FOLDER/device-list.json || true
+          voltctl -m 32MB device list > $LOG_FOLDER/voltha-devices-list.txt || true
+
+          printf '%s\n' $(voltctl -m 32MB device list | grep olt | awk '{print $1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 32MB device flows # > $LOG_FOLDER/voltha-device-flows-#.txt" || true
+              printf '%s\n' $(voltctl -m 32MB device list | grep olt | awk '{print $1}') | xargs --no-run-if-empty -I# bash -c "voltctl -m 32MB device port list --format 'table{{.PortNo}}\t{{.Label}}\t{{.Type}}\t{{.AdminState}}\t{{.OperStatus}}' # > $LOG_FOLDER/voltha-device-ports-#.txt" || true
+
+          printf '%s\n' $(voltctl -m 32MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 32MB logicaldevice flows # > $LOG_FOLDER/voltha-logicaldevice-flows-#.txt" || true
+          printf '%s\n' $(voltctl -m 32MB logicaldevice list -q) | xargs --no-run-if-empty -I# bash -c "voltctl -m 32MB logicaldevice port list # > $LOG_FOLDER/voltha-logicaldevice-ports-#.txt" || true
+          '''
+        } catch(e) {
+          sh '''
+          echo "Can't get device list from voltclt"
+          '''
+        }
+      }
+      // get cpu usage by container
+      sh '''
+      if [ ${withMonitoring} = true ] ; then
+        cd $WORKSPACE/voltha-system-tests
+        make vst_venv
+        source ./vst_venv/bin/activate || true
+        sleep 60 # we have to wait for prometheus to collect all the information
+        python scripts/sizing.py -o $WORKSPACE/plots || true
+      fi
+      '''
+      archiveArtifacts artifacts: 'execution-time.txt,logs/*,logs/pprof/*,RobotLogs/**/*,plots/*,etcd-metrics/*'
+    }
+  }
+}
+
+def start_port_forward(olts) {
+  sh """
+  bbsimRestPortFwd=50071
+  for i in {0..${olts.toInteger() - 1}}; do
+    daemonize -E JENKINS_NODE_COOKIE="dontKillMe" /usr/local/bin/kubectl port-forward --address 0.0.0.0 -n default svc/bbsim\${i} \${bbsimRestPortFwd}:50071
+    ((bbsimRestPortFwd++))
+  done
+  """
+}
diff --git a/jjb/pipeline/voltha/playground/voltha-tt-physical-functional-tests.groovy b/jjb/pipeline/voltha/playground/voltha-tt-physical-functional-tests.groovy
new file mode 100644
index 0000000..1eacba9
--- /dev/null
+++ b/jjb/pipeline/voltha/playground/voltha-tt-physical-functional-tests.groovy
@@ -0,0 +1,265 @@
+// -*- groovy -*-
+// -----------------------------------------------------------------------
+// Copyright 2017-2023 Open Networking Foundation (ONF) and the ONF Contributors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// -----------------------------------------------------------------------
+
+library identifier: 'cord-jenkins-libraries@master',
+    retriever: modernSCM([
+      $class: 'GitSCMSource',
+      remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+node {
+  // Need this so that deployment_config has global scope when it's read later
+  deployment_config = null
+}
+
+def infraNamespace = "infra"
+def volthaNamespace = "voltha"
+
+pipeline {
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+    timeout(time: "${timeout}", unit: 'MINUTES')
+  }
+
+  environment {
+    KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
+    VOLTCONFIG="$HOME/.volt/config-minimal"
+    PATH="$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+  }
+
+  stages {
+    stage('Clone voltha-system-tests') {
+      steps {
+        step([$class: 'WsCleanup'])
+        checkout([
+          $class: 'GitSCM',
+          userRemoteConfigs: [[
+            url: "https://gerrit.opencord.org/voltha-system-tests",
+            refspec: "${volthaSystemTestsChange}"
+          ]],
+          branches: [[ name: "${branch}", ]],
+          extensions: [
+            [$class: 'WipeWorkspace'],
+            [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"],
+            [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+          ],
+        ])
+        script {
+          sh(script:"""
+            if [ '${volthaSystemTestsChange}' != '' ] ; then
+              cd $WORKSPACE/voltha-system-tests;
+              git fetch https://gerrit.opencord.org/voltha-system-tests ${volthaSystemTestsChange} && git checkout FETCH_HEAD
+            fi
+            """)
+        }
+      }
+    }
+    // This checkout allows us to show changes in Jenkins
+    // we only do this on master as we don't branch all the repos for all the releases
+    // (we should compute the difference by tracking the container version, not the code)
+    stage('Download All the VOLTHA repos') {
+      when {
+        expression {
+          return "${branch}" == 'master';
+        }
+      }
+      steps {
+       checkout(changelog: true,
+         poll: false,
+         scm: [$class: 'RepoScm',
+           manifestRepositoryUrl: "${params.manifestUrl}",
+           manifestBranch: "${params.branch}",
+           currentBranch: true,
+           destinationDir: 'voltha',
+           forceSync: true,
+           resetFirst: true,
+           quiet: true,
+           jobs: 4,
+           showAllChanges: true]
+         )
+      }
+    }
+    stage ('Initialize')
+    {
+        steps
+	{
+	    sh returnStdout: false, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
+	    script
+	    {
+		deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+	    }
+		
+        installVoltctl("${branch}")
+
+        sh returnStdout: false, script: """
+        mkdir -p "$WORKSPACE/bin"
+
+        # install kail
+        make -C "$WORKSPACE/voltha-system-tests" KAIL_PATH="$WORKSPACE/bin" kail
+
+        # Default kind-voltha config doesn't work on ONF demo pod for accessing kvstore.
+        # The issue is that the mgmt node is also one of the k8s nodes and so port forwarding doesn't work.
+        # We should change this. In the meantime here is a workaround.
+        if [ "${params.branch}" == "master" ]; then
+           set +e
+
+
+        # Remove noise from voltha-core logs
+           voltctl log level set WARN read-write-core#github.com/opencord/voltha-go/db/model
+           voltctl log level set WARN read-write-core#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+        # Remove noise from openolt logs
+           voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/db
+           voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/probe
+           voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+        fi
+        """
+      }
+    }
+
+    stage('Functional Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+        ROBOT_FILE="Voltha_TT_PODTests.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/tt-workflow/FunctionalTests"
+      }
+      steps {
+        sh """
+        mkdir -p $ROBOT_LOGS_DIR
+        if ( ${powerSwitch} ); then
+             export ROBOT_MISC_ARGS="--removekeywords wuks -i functionalTT -i PowerSwitch -i sanityTT -i sanityTT-MCAST -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+             if ( ${powerCycleOlt} ); then
+                  ROBOT_MISC_ARGS+=" -v power_cycle_olt:True"
+             fi
+        else
+             export ROBOT_MISC_ARGS="--removekeywords wuks -i functionalTT -e PowerSwitch -i sanityTT -i sanityTT-MCAST -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+        fi
+        ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+        make -C $WORKSPACE/voltha-system-tests voltha-tt-test || true
+        """
+      }
+    }
+
+    stage('Failure/Recovery Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+        ROBOT_FILE="Voltha_TT_FailureScenarios.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/tt-workflow/FailureScenarios"
+      }
+      steps {
+        sh """
+        mkdir -p $ROBOT_LOGS_DIR
+        if [ ${params.enableMultiUni} = false ]; then
+          if ( ${powerSwitch} ); then
+               export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functionalTT -i PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+          else
+               export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functionalTT -e PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel}"
+          fi
+          ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+          make -C $WORKSPACE/voltha-system-tests voltha-tt-test || true
+        fi
+        """
+      }
+    }
+
+    stage('Multi-Tcont Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+        ROBOT_FILE="Voltha_TT_MultiTcontTests.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/tt-workflow/MultiTcontScenarios"
+        ROBOT_TEST_INPUT_FILE="$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-TT-multi-tcont-tests-input.yaml"
+      }
+      steps {
+        sh """
+        mkdir -p $ROBOT_LOGS_DIR
+        if [ ${params.enableMultiUni} = false ]; then
+          if ( ${powerSwitch} ); then
+            export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functionalTT -i PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v teardown_device:False -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel} -V $ROBOT_TEST_INPUT_FILE"
+          else
+            export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functionalTT -e PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v teardown_device:False -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel} -V $ROBOT_TEST_INPUT_FILE"
+          fi
+          ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+          make -C $WORKSPACE/voltha-system-tests voltha-tt-test || true
+        fi
+        """
+      }
+    }
+
+    stage('Multicast Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+        ROBOT_FILE="Voltha_TT_MulticastTests.robot"
+        ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/tt-workflow/MulticastTests"
+        ROBOT_TEST_INPUT_FILE="$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-TT-multicast-tests-input.yaml"
+      }
+      steps {
+        sh """
+        mkdir -p $ROBOT_LOGS_DIR
+        if [ ${params.enableMultiUni} = true ]; then
+          if ( ${powerSwitch} ); then
+             export ROBOT_MISC_ARGS="--removekeywords wuks -i multicastTT -i PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v teardown_device:False -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel} -V $ROBOT_TEST_INPUT_FILE"
+          else
+             export ROBOT_MISC_ARGS="--removekeywords wuks -i multicastTT -e PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v teardown_device:False -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE -v OLT_ADAPTER_APP_LABEL:${oltAdapterAppLabel} -V $ROBOT_TEST_INPUT_FILE"
+          fi
+          ROBOT_MISC_ARGS+=" -v NAMESPACE:${volthaNamespace} -v INFRA_NAMESPACE:${infraNamespace}"
+          make -C $WORKSPACE/voltha-system-tests voltha-tt-test || true
+        fi
+        """
+      }
+    }
+
+  }
+  post {
+    always {
+      getPodsInfo("$WORKSPACE/pods")
+      sh returnStdout: false, script: '''
+      set +e
+
+      # collect logs collected in the Robot Framework StartLogging keyword
+      cd $WORKSPACE
+      gzip *-combined.log || true
+      rm *-combined.log || true
+      '''
+      script {
+        deployment_config.olts.each { olt ->
+          if (olt.type == null || olt.type == "" || olt.type == "openolt") {
+             sh returnStdout: false, script: """
+             sshpass -p ${olt.pass} scp ${olt.user}@${olt.sship}:/var/log/openolt.log $WORKSPACE/openolt-${olt.sship}.log || true
+             sshpass -p ${olt.pass} scp ${olt.user}@${olt.sship}:/var/log/dev_mgmt_daemon.log $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log || true
+             sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt-${olt.sship}.log  # Remove escape sequences
+             sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log  # Remove escape sequences
+             """
+          }
+        }
+      }
+      step([$class: 'RobotPublisher',
+        disableArchiveOutput: false,
+        logFileName: '**/log*.html',
+        otherFiles: '',
+        outputFileName: '**/output*.xml',
+        outputPath: 'RobotLogs',
+        passThreshold: 100,
+        reportFileName: '**/report*.html',
+        unstableThreshold: 0,
+        onlyCritical: true
+        ]);
+      archiveArtifacts artifacts: '**/*.log,**/*.gz,**/*.tgz,*.txt,pods/*.txt'
+    }
+  }
+}