[VOL-3780] Unifying tucson POD pipelines and migrating to voltha charts
Change-Id: I010087d59ae9745904aa1effa0b4bbad5e5b84f1
diff --git a/jjb/pipeline/voltha/master/bbsim-tests.groovy b/jjb/pipeline/voltha/master/bbsim-tests.groovy
index 63d2582..2e2179c 100644
--- a/jjb/pipeline/voltha/master/bbsim-tests.groovy
+++ b/jjb/pipeline/voltha/master/bbsim-tests.groovy
@@ -23,51 +23,13 @@
remote: 'https://gerrit.opencord.org/ci-management.git'
])
-// TODO move this in a keyword so it can be shared across pipelines
-def customImageFlags(project) {
- def chart = "unknown"
- def image = "unknown"
- switch(project) {
- case "ofagent-go":
- chart = "voltha"
- image = "ofagent"
- break
- case "voltha-go":
- chart = "voltha"
- image = "rw_core"
- break
- case "voltha-openonu-adapter-go":
- chart = "voltha-adapter-openonu"
- image = "adapter_open_onu_go"
- break
- // TODO remove after 2.7
- case "voltha-openonu-adapter":
- chart = "voltha-adapter-openonu"
- image = "adapter_open_onu"
- break
- // TODO end
- case "voltha-openolt-adapter":
- chart = "voltha-adapter-openolt"
- image = "adapter_open_olt"
- break
- case "bbsim":
- // BBSIM has a different format that voltha, return directly
- return "--set images.bbsim.tag=citest,images.bbsim.pullPolicy=Never,images.bbsim.registry='' "
- break
- default:
- return ""
- }
-
- return "--set ${chart}.images.${image}.tag=citest,${chart}.images.${image}.pullPolicy=Never,${chart}.images.${image}.registry='' "
-}
-
def test_workflow(name) {
timeout(time: 10, unit: 'MINUTES') {
stage('Deploy - '+ name + ' workflow') {
def extraHelmFlags = "${extraHelmFlags} --set global.log_level=DEBUG,onu=1,pon=1 "
if (gerritProject != "") {
- extraHelmFlags = extraHelmFlags + customImageFlags("${gerritProject}")
+ extraHelmFlags = extraHelmFlags + getVolthaImageFlags("${gerritProject}")
}
def localCharts = false
diff --git a/jjb/pipeline/voltha/master/tucson-build-and-test.groovy b/jjb/pipeline/voltha/master/tucson-build-and-test.groovy
new file mode 100644
index 0000000..d400681
--- /dev/null
+++ b/jjb/pipeline/voltha/master/tucson-build-and-test.groovy
@@ -0,0 +1,312 @@
+
+// Copyright 2017-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// used to deploy VOLTHA and configure ONOS physical PODs
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+library identifier: 'cord-jenkins-libraries@master',
+ retriever: modernSCM([
+ $class: 'GitSCMSource',
+ remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+def infraNamespace = "infra"
+def volthaNamespace = "voltha"
+def clusterName = "kind-ci"
+pipeline {
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: 120, unit: 'MINUTES')
+ }
+ environment {
+ PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
+ KUBECONFIG="$HOME/.kube/kind-${clusterName}"
+ VOLTCONFIG="$HOME/.volt/config"
+ }
+ stages{
+ stage('Download Code') {
+ steps {
+ getVolthaCode([
+ branch: "${branch}",
+ gerritProject: "${gerritProject}",
+ gerritRefspec: "${gerritRefspec}",
+ volthaSystemTestsChange: "${volthaSystemTestsChange}",
+ volthaHelmChartsChange: "${volthaHelmChartsChange}",
+ ])
+ }
+ }
+ stage ("Parse deployment configuration file") {
+ steps {
+ sh returnStdout: true, script: "rm -rf ${configBaseDir}"
+ sh returnStdout: true, script: "git clone -b master ${cordRepoUrl}/${configBaseDir}"
+ script {
+ if ( params.workflow.toUpperCase() == "DT" ) {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+ }
+ else if ( params.workflow.toUpperCase() == "TT" ) {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+ }
+ else {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ }
+ }
+ }
+ }
+ stage('Clean up') {
+ steps {
+ timeout(15) {
+ script {
+ helmTeardown(["default", infraNamespace, volthaNamespace])
+ }
+ timeout(1) {
+ sh returnStdout: false, script: '''
+ # remove orphaned port-forward from different namespaces
+ ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9
+ '''
+ }
+ }
+ }
+ }
+ stage('Build patch') {
+ steps {
+ // NOTE that the correct patch has already been checked out
+ // during the getVolthaCode step
+ buildVolthaComponent("${gerritProject}")
+ }
+ }
+ stage('Create K8s Cluster') {
+ steps {
+ script {
+ def clusterExists = sh returnStdout: true, script: """
+ kind get clusters | grep ${clusterName} | wc -l
+ """
+ if (clusterExists.trim() == "0") {
+ createKubernetesCluster([nodes: 3, name: clusterName])
+ }
+ }
+ }
+ }
+ stage('Load image in kind nodes') {
+ steps {
+ loadToKind()
+ }
+ }
+ stage('Install Voltha') {
+ steps {
+ timeout(20) {
+ script {
+ imageFlags = getVolthaImageFlags(gerritProject)
+ // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
+ def localCharts = false
+ if (volthaHelmChartsChange != "" || gerritProject == "voltha-helm-charts") {
+ localCharts = true
+ }
+ def extraHelmFlags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml ${imageFlags} "
+ // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
+ extraHelmFlags = extraHelmFlags + "--set onos-classic.onosSshPort=30115 " +
+ "--set onos-classic.onosApiPort=30120 " +
+ "--set onos-classic.onosOfPort=31653 " +
+ "--set onos-classic.individualOpenFlowNodePorts=true "
+ volthaDeploy([
+ workflow: workFlow.toLowerCase(),
+ extraHelmFlags: extraHelmFlags,
+ localCharts: localCharts,
+ kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
+ onosReplica: 3,
+ atomixReplica: 3,
+ kafkaReplica: 3,
+ etcdReplica: 3,
+ ])
+ }
+ // start logging
+ sh """
+ mkdir -p $WORKSPACE/${workFlow}
+ _TAG=kail-${workFlow} kail -n infra -n voltha > $WORKSPACE/${workFlow}/onos-voltha-combined.log &
+ """
+ sh """
+ JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
+ JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd 2379:2379; done"&
+ JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
+ ps aux | grep port-forward
+ """
+ getPodsInfo("$WORKSPACE")
+ }
+ }
+ }
+ stage('Deploy Kafka Dump Chart') {
+ steps {
+ script {
+ sh returnStdout: false, script: """
+ helm repo add cord https://charts.opencord.org
+ helm repo update
+ if helm version -c --short|grep v2 -q; then
+ helm install -n voltha-kafka-dump cord/voltha-kafka-dump
+ else
+ helm install voltha-kafka-dump cord/voltha-kafka-dump
+ fi
+ """
+ }
+ }
+ }
+ stage('Push Tech-Profile') {
+ when {
+ expression { params.profile != "Default" }
+ }
+ steps {
+ sh returnStdout: false, script: """
+ etcd_container=\$(kubectl get pods -n voltha | grep voltha-etcd-cluster | awk 'NR==1{print \$1}')
+ kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json voltha/\$etcd_container:/tmp/flexpod.json
+ kubectl exec -it \$etcd_container -n voltha -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/XGS-PON/64'
+ """
+ }
+ }
+
+ stage('Push Sadis-config') {
+ steps {
+ sh returnStdout: false, script: """
+ ssh-keygen -R [${deployment_config.nodes[0].ip}]:30115
+ ssh-keyscan -p 30115 -H ${deployment_config.nodes[0].ip} >> ~/.ssh/known_hosts
+ sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay"
+ sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa"
+ sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt"
+ sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager"
+ sshpass -p karaf ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager"
+
+ if [[ "${workFlow.toUpperCase()}" == "DT" ]]; then
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json
+ elif [[ "${workFlow.toUpperCase()}" == "TT" ]]; then
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json
+ else
+ # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
+ fi
+ """
+ }
+ }
+ stage('Reinstall OLT software') {
+ when {
+ expression { params.reinstallOlt }
+ }
+ steps {
+ script {
+ deployment_config.olts.each { olt ->
+ sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'"
+ waitUntil {
+ olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
+ return olt_sw_present.toInteger() == 0
+ }
+ if ( params.branch == 'voltha-2.3' ) {
+ oltDebVersion = oltDebVersionVoltha23
+ } else {
+ oltDebVersion = oltDebVersionMaster
+ }
+ sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --install ${oltDebVersion}'"
+ waitUntil {
+ olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
+ return olt_sw_present.toInteger() == 1
+ }
+ if ( olt.fortygig ) {
+ // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
+ sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'echo port ce128 sp=40000 >> /broadcom/qax.soc ; /opt/bcm68620/svk_init.sh'"
+ }
+ }
+ }
+ }
+ }
+
+ stage('Restart OLT processes') {
+ steps {
+ script {
+ deployment_config.olts.each { olt ->
+ sh returnStdout: false, script: """
+ ssh-keyscan -H ${olt.ip} >> ~/.ssh/known_hosts
+ sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; reboot'
+ sleep 120
+ """
+ waitUntil {
+ onu_discovered = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'grep \"onu discover indication\" /var/log/openolt.log | wc -l'"
+ return onu_discovered.toInteger() > 0
+ }
+ }
+ }
+ }
+ }
+ stage('Run E2E Tests') {
+ steps {
+ script {
+ if ( params.workflow.toUpperCase() == "DT" ) {
+ robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+ }
+ else if ( params.workflow.toUpperCase() == "TT" ) {
+ robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+ }
+ else {
+ robotConfigFile = "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ }
+ }
+ sh returnStdout: false, script: """
+ mkdir -p $WORKSPACE/RobotLogs
+
+ export ROBOT_CONFIG_FILE="$WORKSPACE/${robotConfigFile}"
+ export ROBOT_MISC_ARGS="${params.extraRobotArgs} --removekeywords wuks -d $WORKSPACE/RobotLogs -v container_log_dir:$WORKSPACE "
+ export ROBOT_FILE="Voltha_PODTests.robot"
+
+ # If the Gerrit comment contains a line with "functional tests" then run the full
+ # functional test suite. This covers tests tagged either 'sanity' or 'functional'.
+ # Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line
+ REGEX="functional tests"
+ if [[ "${gerritComment}" =~ \$REGEX ]]; then
+ ROBOT_MISC_ARGS+="-i functional"
+ fi
+ # Likewise for dataplane tests
+ REGEX="dataplane tests"
+ if [[ "${gerritComment}" =~ \$REGEX ]]; then
+ ROBOT_MISC_ARGS+="-i dataplane"
+ fi
+
+ make -C $WORKSPACE/voltha-system-tests voltha-test || true
+ """
+ }
+ }
+ }
+ post {
+ always {
+ // stop logging
+ sh """
+ P_IDS="\$(ps e -ww -A | grep "_TAG=kail-${workFlow}" | grep -v grep | awk '{print \$1}')"
+ if [ -n "\$P_IDS" ]; then
+ echo \$P_IDS
+ for P_ID in \$P_IDS; do
+ kill -9 \$P_ID
+ done
+ fi
+ gzip $WORKSPACE/${workFlow}/onos-voltha-combined.log || true
+ """
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: 'RobotLogs/log*.html',
+ otherFiles: '',
+ outputFileName: 'RobotLogs/output*.xml',
+ outputPath: '.',
+ passThreshold: 100,
+ reportFileName: 'RobotLogs/report*.html',
+ unstableThreshold: 0]);
+ archiveArtifacts artifacts: '**/*.txt,**/*.gz,*.gz'
+ }
+ }
+}
+
+// refs/changes/06/24206/5
diff --git a/jjb/pipeline/voltha/voltha-2.7/voltha-dt-physical-build-and-tests.groovy b/jjb/pipeline/voltha/voltha-2.7/voltha-dt-physical-build-and-tests.groovy
new file mode 100644
index 0000000..42e253c
--- /dev/null
+++ b/jjb/pipeline/voltha/voltha-2.7/voltha-dt-physical-build-and-tests.groovy
@@ -0,0 +1,442 @@
+// Copyright 2019-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// deploy VOLTHA built from patchset on a physical pod and run e2e test
+// uses kind-voltha to deploy voltha-2.X
+
+// Need this so that deployment_config has global scope when it's read later
+deployment_config = null
+localDeploymentConfigFile = null
+localKindVolthaValuesFile = null
+localSadisConfigFile = null
+
+// The pipeline assumes these variables are always defined
+if ( params.manualBranch != "" ) {
+ GERRIT_EVENT_COMMENT_TEXT = ""
+ GERRIT_PROJECT = ""
+ GERRIT_BRANCH = "${params.manualBranch}"
+ GERRIT_CHANGE_NUMBER = ""
+ GERRIT_PATCHSET_NUMBER = ""
+}
+
+pipeline {
+
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: 120, unit: 'MINUTES')
+ }
+
+ environment {
+ KUBECONFIG="$HOME/.kube/kind-config-voltha-minimal"
+ VOLTCONFIG="$HOME/.volt/config-minimal"
+ PATH="$WORKSPACE/voltha/kind-voltha/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+ NAME="minimal"
+ FANCY=0
+ //VOL-2194 ONOS SSH and REST ports hardcoded to 30115/30120 in tests
+ ONOS_SSH_PORT=30115
+ ONOS_API_PORT=30120
+ }
+
+ stages {
+ stage ('Initialize') {
+ steps {
+ sh returnStdout: false, script: """
+ test -e $WORKSPACE/voltha/kind-voltha/voltha && cd $WORKSPACE/voltha/kind-voltha && ./voltha down
+ cd $WORKSPACE
+ rm -rf $WORKSPACE/*
+ """
+ script {
+ if (env.configRepo && ! env.localConfigDir) {
+ env.localConfigDir = "$WORKSPACE"
+ sh returnStdout: false, script: "git clone -b master ${cordRepoUrl}/${configRepo}"
+ }
+ localDeploymentConfigFile = "${env.localConfigDir}/${params.deploymentConfigFile}"
+ localKindVolthaValuesFile = "${env.localConfigDir}/${params.kindVolthaValuesFile}"
+ localSadisConfigFile = "${env.localConfigDir}/${params.sadisConfigFile}"
+ }
+ }
+ }
+
+ stage('Repo') {
+ steps {
+ checkout(changelog: true,
+ poll: false,
+ scm: [$class: 'RepoScm',
+ manifestRepositoryUrl: "${params.manifestUrl}",
+ manifestBranch: "${params.branch}",
+ currentBranch: true,
+ destinationDir: 'voltha',
+ forceSync: true,
+ resetFirst: true,
+ quiet: true,
+ jobs: 4,
+ showAllChanges: true]
+ )
+ }
+ }
+
+ stage('Get Patch') {
+ when {
+ expression { params.manualBranch == "" }
+ }
+ steps {
+ sh returnStdout: false, script: """
+ cd voltha
+ repo download "${gerritProject}" "${gerritChangeNumber}/${gerritPatchsetNumber}"
+ """
+ }
+ }
+
+ stage('Check config files') {
+ steps {
+ script {
+ try {
+ deployment_config = readYaml file: "${localDeploymentConfigFile}"
+ } catch (err) {
+ echo "Error reading ${localDeploymentConfigFile}"
+ throw err
+ }
+ sh returnStdout: false, script: """
+ if [ ! -e ${localKindVolthaValuesFile} ]; then echo "${localKindVolthaValuesFile} not found"; exit 1; fi
+ if [ ! -e ${localSadisConfigFile} ]; then echo "${localSadisConfigFile} not found"; exit 1; fi
+ """
+ }
+ }
+ }
+
+ stage('Create KinD Cluster') {
+ steps {
+ sh returnStdout: false, script: """
+ if [ "${branch}" != "master" ]; then
+ echo "on branch: ${branch}, sourcing kind-voltha/releases/${branch}"
+ source "$WORKSPACE/voltha/kind-voltha/releases/${branch}"
+ else
+ echo "on master, using default settings for kind-voltha"
+ fi
+
+ cd $WORKSPACE/voltha/kind-voltha/
+ JUST_K8S=y ./voltha up
+ """
+ }
+ }
+
+ stage('Build and Push Images') {
+ when {
+ expression { params.manualBranch == "" }
+ }
+ steps {
+ sh returnStdout: false, script: """
+
+ if [ "${branch}" != "master" ]; then
+ echo "on branch: ${branch}, sourcing kind-voltha/releases/${branch}"
+ source "$WORKSPACE/voltha/kind-voltha/releases/${branch}"
+ else
+ echo "on master, using default settings for kind-voltha"
+ fi
+
+ if ! [[ "${gerritProject}" =~ ^(voltha-system-tests|kind-voltha|voltha-helm-charts)\$ ]]; then
+ make -C $WORKSPACE/voltha/${gerritProject} DOCKER_REPOSITORY=voltha/ DOCKER_TAG=citest docker-build
+ docker images | grep citest
+ for image in \$(docker images -f "reference=*/*citest" --format "{{.Repository}}")
+ do
+ echo "Pushing \$image to nodes"
+ kind load docker-image \$image:citest --name voltha-\$NAME --nodes voltha-\$NAME-worker,voltha-\$NAME-worker2
+ docker rmi \$image:citest \$image:latest || true
+ done
+ fi
+ """
+ }
+ }
+
+ stage('Deploy Voltha') {
+ environment {
+ WITH_RADIUS="no"
+ WITH_EAPOL="no"
+ WITH_DHCP="no"
+ WITH_IGMP="no"
+ CONFIG_SADIS="no"
+ WITH_SIM_ADAPTERS="no"
+ DEPLOY_K8S="no"
+ VOLTHA_LOG_LEVEL="DEBUG"
+ }
+ steps {
+ script {
+ sh returnStdout: false, script: """
+ if [ "${branch}" != "master" ]; then
+ echo "on branch: ${branch}, sourcing kind-voltha/releases/${branch}"
+ source "$WORKSPACE/voltha/kind-voltha/releases/${branch}"
+ else
+ echo "on master, using default settings for kind-voltha"
+ fi
+
+ export EXTRA_HELM_FLAGS+='--set log_agent.enabled=False -f ${localKindVolthaValuesFile} '
+
+ IMAGES=""
+ if [ "${gerritProject}" = "voltha-go" ]; then
+ IMAGES="rw_core ro_core "
+ elif [ "${gerritProject}" = "ofagent-py" ]; then
+ IMAGES="ofagent "
+ elif [ "${gerritProject}" = "voltha-onos" ]; then
+ IMAGES="onos "
+ elif [ "${gerritProject}" = "voltha-openolt-adapter" ]; then
+ IMAGES="adapter_open_olt "
+ elif [ "${gerritProject}" = "voltha-openonu-adapter" ]; then
+ IMAGES="adapter_open_onu "
+ elif [ "${gerritProject}" = "voltha-openonu-adapter-go" ]; then
+ IMAGES="adapter_open_onu_go "
+ elif [ "${gerritProject}" = "voltha-api-server" ]; then
+ IMAGES="afrouter afrouterd "
+ else
+ echo "No images to push"
+ fi
+
+ for I in \$IMAGES
+ do
+ EXTRA_HELM_FLAGS+="--set images.\$I.tag=citest,images.\$I.pullPolicy=Never "
+ done
+
+ if [ "${gerritProject}" = "voltha-helm-charts" ]; then
+ export CHART_PATH=$WORKSPACE/voltha/voltha-helm-charts
+ export VOLTHA_CHART=\$CHART_PATH/voltha
+ export VOLTHA_ADAPTER_OPEN_OLT_CHART=\$CHART_PATH/voltha-adapter-openolt
+ export VOLTHA_ADAPTER_OPEN_ONU_CHART=\$CHART_PATH/voltha-adapter-openonu
+ helm dep update \$VOLTHA_CHART
+ helm dep update \$VOLTHA_ADAPTER_OPEN_OLT_CHART
+ helm dep update \$VOLTHA_ADAPTER_OPEN_ONU_CHART
+ fi
+
+ cd $WORKSPACE/voltha/kind-voltha/
+ echo \$EXTRA_HELM_FLAGS
+ kail -n voltha -n default > $WORKSPACE/onos-voltha-combined.log &
+ ./voltha up
+
+ set +e
+
+ # Remove noise from voltha-core logs
+ voltctl log level set WARN read-write-core#github.com/opencord/voltha-go/db/model
+ voltctl log level set WARN read-write-core#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+ # Remove noise from openolt logs
+ voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/db
+ voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/probe
+ voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+ """
+ }
+ }
+ }
+
+ stage('Deploy Kafka Dump Chart') {
+ steps {
+ script {
+ sh returnStdout: false, script: """
+ helm repo add cord https://charts.opencord.org
+ helm repo update
+ if helm version -c --short|grep v2 -q; then
+ helm install -n voltha-kafka-dump cord/voltha-kafka-dump
+ else
+ helm install voltha-kafka-dump cord/voltha-kafka-dump
+ fi
+ """
+ }
+ }
+ }
+
+ stage('Push Tech-Profile') {
+ when {
+ expression { params.profile != "Default" }
+ }
+ steps {
+ sh returnStdout: false, script: """
+ etcd_container=\$(kubectl get pods -n voltha | grep voltha-etcd-cluster | awk 'NR==1{print \$1}')
+ kubectl cp $WORKSPACE/voltha/voltha-system-tests/tests/data/TechProfile-${profile}.json voltha/\$etcd_container:/tmp/flexpod.json
+ kubectl exec -it \$etcd_container -n voltha -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/XGS-PON/64'
+ """
+ }
+ }
+
+ stage('Push Sadis-config') {
+ steps {
+ sh returnStdout: false, script: """
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:$ONOS_API_PORT/onos/v1/network/configuration --data @${localSadisConfigFile}
+ """
+ }
+ }
+
+ stage('Reinstall OLT software') {
+ when {
+ expression { params.reinstallOlt }
+ }
+ steps {
+ script {
+ deployment_config.olts.each { olt ->
+ sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'"
+ waitUntil {
+ olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
+ return olt_sw_present.toInteger() == 0
+ }
+ if ( params.branch == 'voltha-2.3' ) {
+ oltDebVersion = oltDebVersionVoltha23
+ } else {
+ oltDebVersion = oltDebVersionMaster
+ }
+ sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --install ${oltDebVersion}'"
+ waitUntil {
+ olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
+ return olt_sw_present.toInteger() == 1
+ }
+ if ( olt.fortygig ) {
+ // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
+ sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'echo port ce128 sp=40000 >> /broadcom/qax.soc ; /opt/bcm68620/svk_init.sh'"
+ }
+ }
+ }
+ }
+ }
+
+ stage('Restart OLT processes') {
+ steps {
+ script {
+ deployment_config.olts.each { olt ->
+ sh returnStdout: false, script: """
+ ssh-keyscan -H ${olt.ip} >> ~/.ssh/known_hosts
+ sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; reboot'
+ sleep 120
+ """
+ waitUntil {
+ onu_discovered = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'grep \"onu discover indication\" /var/log/openolt.log | wc -l'"
+ return onu_discovered.toInteger() > 0
+ }
+ }
+ }
+ }
+ }
+
+ stage('Run E2E Tests') {
+ environment {
+ ROBOT_CONFIG_FILE="${localDeploymentConfigFile}"
+ ROBOT_MISC_ARGS="${params.extraRobotArgs} --removekeywords wuks -d $WORKSPACE/RobotLogs -v container_log_dir:$WORKSPACE "
+ ROBOT_FILE="Voltha_DT_PODTests.robot"
+ }
+ steps {
+ sh returnStdout: false, script: """
+ cd voltha
+ mkdir -p $WORKSPACE/RobotLogs
+
+ # If the Gerrit comment contains a line with "functional tests" then run the full
+ # functional test suite. This covers tests tagged either 'sanity' or 'functional'.
+ # Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line
+ REGEX="functional tests"
+ if [[ "$GERRIT_EVENT_COMMENT_TEXT" =~ \$REGEX ]]; then
+ ROBOT_MISC_ARGS+="-i functionalDt"
+ fi
+ # Likewise for dataplane tests
+ REGEX="dataplane tests"
+ if [[ "$GERRIT_EVENT_COMMENT_TEXT" =~ \$REGEX ]]; then
+ ROBOT_MISC_ARGS+="-i dataplaneDt"
+ fi
+
+ make -C $WORKSPACE/voltha/voltha-system-tests voltha-dt-test || true
+ """
+ }
+ }
+
+ stage('After-Test Delay') {
+ when {
+ expression { params.manualBranch == "" }
+ }
+ steps {
+ sh returnStdout: false, script: """
+ # Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line
+ REGEX="hardware test with delay\$"
+ [[ "$GERRIT_EVENT_COMMENT_TEXT" =~ \$REGEX ]] && sleep 10m || true
+ """
+ }
+ }
+ }
+
+ post {
+ always {
+ sh returnStdout: false, script: '''
+ set +e
+ cp $WORKSPACE/voltha/kind-voltha/install-minimal.log $WORKSPACE/
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq
+ kubectl get nodes -o wide
+ kubectl get pods -o wide
+ kubectl get pods -n voltha -o wide
+
+ sync
+ pkill kail || true
+
+ ## Pull out errors from log files
+ extract_errors_go() {
+ echo
+ echo "Error summary for $1:"
+ grep $1 $WORKSPACE/onos-voltha-combined.log | grep '"level":"error"' | cut -d ' ' -f 2- | jq -r '.msg'
+ echo
+ }
+
+ extract_errors_python() {
+ echo
+ echo "Error summary for $1:"
+ grep $1 $WORKSPACE/onos-voltha-combined.log | grep 'ERROR' | cut -d ' ' -f 2-
+ echo
+ }
+
+ extract_errors_go voltha-rw-core > $WORKSPACE/error-report.log
+ extract_errors_go adapter-open-olt >> $WORKSPACE/error-report.log
+ extract_errors_python adapter-open-onu >> $WORKSPACE/error-report.log
+ extract_errors_python voltha-ofagent >> $WORKSPACE/error-report.log
+
+ gzip $WORKSPACE/onos-voltha-combined.log
+
+ ## collect events, the chart should be running by now
+ kubectl get pods | grep -i voltha-kafka-dump | grep -i running
+ if [[ $? == 0 ]]; then
+ kubectl exec -it `kubectl get pods | grep -i voltha-kafka-dump | grep -i running | cut -f1 -d " "` ./voltha-dump-events.sh > $WORKSPACE/voltha-events.log
+ fi
+ '''
+ script {
+ deployment_config.olts.each { olt ->
+ sh returnStdout: false, script: """
+ until sshpass -p ${olt.pass} scp ${olt.user}@${olt.ip}:/var/log/openolt.log $WORKSPACE/openolt-${olt.ip}.log
+ do
+ echo "Fetching openolt.log log failed, retrying..."
+ sleep 10
+ done
+ sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt-${olt.ip}.log # Remove escape sequences
+ until sshpass -p ${olt.pass} scp ${olt.user}@${olt.ip}:/var/log/dev_mgmt_daemon.log $WORKSPACE/dev_mgmt_daemon-${olt.ip}.log
+ do
+ echo "Fetching dev_mgmt_daemon.log failed, retrying..."
+ sleep 10
+ done
+ sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/dev_mgmt_daemon-${olt.ip}.log # Remove escape sequences
+ """
+ }
+ }
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: 'RobotLogs/log*.html',
+ otherFiles: '',
+ outputFileName: 'RobotLogs/output*.xml',
+ outputPath: '.',
+ passThreshold: 100,
+ reportFileName: 'RobotLogs/report*.html',
+ unstableThreshold: 0]);
+ archiveArtifacts artifacts: '*.log,*.gz'
+ }
+ }
+}
diff --git a/jjb/pipeline/voltha/voltha-2.7/voltha-physical-build-and-tests.groovy b/jjb/pipeline/voltha/voltha-2.7/voltha-physical-build-and-tests.groovy
new file mode 100644
index 0000000..e719a08
--- /dev/null
+++ b/jjb/pipeline/voltha/voltha-2.7/voltha-physical-build-and-tests.groovy
@@ -0,0 +1,450 @@
+// Copyright 2019-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// deploy VOLTHA built from patchset on a physical pod and run e2e test
+// uses kind-voltha to deploy voltha-2.X
+
+// NOTE we are importing the library even if it's global so that it's
+// easier to change the keywords during a replay
+library identifier: 'cord-jenkins-libraries@master',
+ retriever: modernSCM([
+ $class: 'GitSCMSource',
+ remote: 'https://gerrit.opencord.org/ci-management.git'
+])
+
+// Need this so that deployment_config has global scope when it's read later
+deployment_config = null
+localDeploymentConfigFile = null
+localKindVolthaValuesFile = null
+localSadisConfigFile = null
+
+// The pipeline assumes these variables are always defined
+if ( params.manualBranch != "" ) {
+ GERRIT_EVENT_COMMENT_TEXT = ""
+ GERRIT_PROJECT = ""
+ GERRIT_BRANCH = "${params.manualBranch}"
+ GERRIT_CHANGE_NUMBER = ""
+ GERRIT_PATCHSET_NUMBER = ""
+}
+
+pipeline {
+
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: 120, unit: 'MINUTES')
+ }
+
+ environment {
+ KUBECONFIG="$HOME/.kube/kind-config-voltha-minimal"
+ VOLTCONFIG="$HOME/.volt/config-minimal"
+ PATH="$WORKSPACE/bin:$WORKSPACE/kind-voltha/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+ NAME="minimal"
+ FANCY=0
+ //VOL-2194 ONOS SSH and REST ports hardcoded to 30115/30120 in tests
+ ONOS_SSH_PORT=30115
+ ONOS_API_PORT=30120
+ }
+
+ stages {
+ stage ('Initialize') {
+ steps {
+ sh returnStdout: false, script: """
+ test -e $WORKSPACE/kind-voltha/voltha && cd $WORKSPACE/kind-voltha && ./voltha down
+ cd $WORKSPACE
+ rm -rf $WORKSPACE/*
+ """
+ script {
+ if (env.configRepo && ! env.localConfigDir) {
+ env.localConfigDir = "$WORKSPACE"
+ sh returnStdout: false, script: "git clone -b master ${cordRepoUrl}/${configRepo}"
+ }
+ localDeploymentConfigFile = "${env.localConfigDir}/${params.deploymentConfigFile}"
+ localKindVolthaValuesFile = "${env.localConfigDir}/${params.kindVolthaValuesFile}"
+ localSadisConfigFile = "${env.localConfigDir}/${params.sadisConfigFile}"
+ }
+ }
+ }
+
+ stage('Download Code') {
+ steps {
+ checkout([
+ $class: 'GitSCM',
+ userRemoteConfigs: [[
+ url: "https://gerrit.opencord.org/kind-voltha",
+ ]],
+ branches: [[ name: "master", ]],
+ extensions: [
+ [$class: 'WipeWorkspace'],
+ [$class: 'RelativeTargetDirectory', relativeTargetDir: "kind-voltha"],
+ [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+ ],
+ ])
+ getVolthaCode([
+ branch: "${branch}",
+ gerritProject: "${gerritProject}",
+ gerritRefspec: "${gerritRefspec}",
+ volthaSystemTestsChange: "${volthaSystemTestsChange}",
+ volthaHelmChartsChange: "${volthaHelmChartsChange}",
+ ])
+ }
+ }
+
+ stage('Check config files') {
+ steps {
+ script {
+ try {
+ deployment_config = readYaml file: "${localDeploymentConfigFile}"
+ } catch (err) {
+ echo "Error reading ${localDeploymentConfigFile}"
+ throw err
+ }
+ sh returnStdout: false, script: """
+ if [ ! -e ${localKindVolthaValuesFile} ]; then echo "${localKindVolthaValuesFile} not found"; exit 1; fi
+ if [ ! -e ${localSadisConfigFile} ]; then echo "${localSadisConfigFile} not found"; exit 1; fi
+ """
+ }
+ }
+ }
+
+ stage('Build patch') {
+ steps {
+ // NOTE that the correct patch has already been checked out
+ // during the getVolthaCode step
+ buildVolthaComponent("${gerritProject}")
+ }
+ }
+
+ stage('Create KinD Cluster') {
+ steps {
+ sh returnStdout: false, script: """
+ if [ "${branch}" != "master" ]; then
+ echo "on branch: ${branch}, sourcing kind-voltha/releases/${branch}"
+ source "$WORKSPACE/kind-voltha/releases/${branch}"
+ else
+ echo "on master, using default settings for kind-voltha"
+ fi
+ cd $WORKSPACE/kind-voltha/
+ JUST_K8S=y ./voltha up
+ """
+ }
+ }
+
+ stage('Load image in kind nodes') {
+ when {
+ expression { params.manualBranch == "" }
+ }
+ steps {
+ sh returnStdout: false, script: """
+ if [ "${branch}" != "master" ]; then
+ echo "on branch: ${branch}, sourcing kind-voltha/releases/${branch}"
+ source "$WORKSPACE/kind-voltha/releases/${branch}"
+ else
+ echo "on master, using default settings for kind-voltha"
+ fi
+ if ! [[ "${gerritProject}" =~ ^(voltha-system-tests|kind-voltha|voltha-helm-charts)\$ ]]; then
+ docker images | grep citest
+ for image in \$(docker images -f "reference=*/*citest" --format "{{.Repository}}")
+ do
+ echo "Pushing \$image to nodes"
+ kind load docker-image \$image:citest --name voltha-\$NAME --nodes voltha-\$NAME-worker,voltha-\$NAME-worker2
+ docker rmi \$image:citest \$image:latest || true
+ done
+ fi
+ """
+ }
+ }
+
+ stage('Deploy Voltha') {
+ environment {
+ WITH_SIM_ADAPTERS="no"
+ WITH_RADIUS="yes"
+ DEPLOY_K8S="no"
+ VOLTHA_LOG_LEVEL="DEBUG"
+ }
+ steps {
+ script {
+ sh returnStdout: false, script: """
+ if [ "${branch}" != "master" ]; then
+ echo "on branch: ${branch}, sourcing kind-voltha/releases/${branch}"
+ source "$WORKSPACE/kind-voltha/releases/${branch}"
+ else
+ echo "on master, using default settings for kind-voltha"
+ fi
+
+ export EXTRA_HELM_FLAGS+='--set log_agent.enabled=False -f ${localKindVolthaValuesFile} '
+
+ IMAGES=""
+ if [ "${gerritProject}" = "voltha-go" ]; then
+ IMAGES="rw_core ro_core "
+ elif [ "${gerritProject}" = "ofagent-py" ]; then
+ IMAGES="ofagent "
+ elif [ "${gerritProject}" = "voltha-onos" ]; then
+ IMAGES="onos "
+ elif [ "${gerritProject}" = "voltha-openolt-adapter" ]; then
+ IMAGES="adapter_open_olt "
+ elif [ "${gerritProject}" = "voltha-openonu-adapter" ]; then
+ IMAGES="adapter_open_onu "
+ elif [ "${gerritProject}" = "voltha-openonu-adapter-go" ]; then
+ IMAGES="adapter_open_onu_go "
+ elif [ "${gerritProject}" = "voltha-api-server" ]; then
+ IMAGES="afrouter afrouterd "
+ else
+ echo "No images to push"
+ fi
+
+ for I in \$IMAGES
+ do
+ EXTRA_HELM_FLAGS+="--set images.\$I.tag=citest,images.\$I.pullPolicy=Never "
+ done
+
+ if [ "${gerritProject}" = "voltha-helm-charts" ]; then
+ export CHART_PATH=$WORKSPACE/voltha-helm-charts
+ export VOLTHA_CHART=\$CHART_PATH/voltha
+ export VOLTHA_ADAPTER_OPEN_OLT_CHART=\$CHART_PATH/voltha-adapter-openolt
+ export VOLTHA_ADAPTER_OPEN_ONU_CHART=\$CHART_PATH/voltha-adapter-openonu
+ helm dep update \$VOLTHA_CHART
+ helm dep update \$VOLTHA_ADAPTER_OPEN_OLT_CHART
+ helm dep update \$VOLTHA_ADAPTER_OPEN_ONU_CHART
+ fi
+
+ cd $WORKSPACE/kind-voltha/
+ echo \$EXTRA_HELM_FLAGS
+ kail -n voltha -n default > $WORKSPACE/onos-voltha-combined.log &
+ ./voltha up
+
+ set +e
+
+ # Remove noise from voltha-core logs
+ voltctl log level set WARN read-write-core#github.com/opencord/voltha-go/db/model
+ voltctl log level set WARN read-write-core#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+ # Remove noise from openolt logs
+ voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/db
+ voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/probe
+ voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+ """
+ }
+ }
+ }
+
+ stage('Deploy Kafka Dump Chart') {
+ steps {
+ script {
+ sh returnStdout: false, script: """
+ helm repo add cord https://charts.opencord.org
+ helm repo update
+ if helm version -c --short|grep v2 -q; then
+ helm install -n voltha-kafka-dump cord/voltha-kafka-dump
+ else
+ helm install voltha-kafka-dump cord/voltha-kafka-dump
+ fi
+ """
+ }
+ }
+ }
+
+ stage('Push Tech-Profile') {
+ when {
+ expression { params.profile != "Default" }
+ }
+ steps {
+ sh returnStdout: false, script: """
+ etcd_container=\$(kubectl get pods -n voltha | grep voltha-etcd-cluster | awk 'NR==1{print \$1}')
+ kubectl cp $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json voltha/\$etcd_container:/tmp/flexpod.json
+ kubectl exec -it \$etcd_container -n voltha -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/XGS-PON/64'
+ """
+ }
+ }
+
+ stage('Push Sadis-config') {
+ steps {
+ sh returnStdout: false, script: """
+ ssh-keygen -R [${deployment_config.nodes[0].ip}]:30115
+ ssh-keyscan -p 30115 -H ${deployment_config.nodes[0].ip} >> ~/.ssh/known_hosts
+ sshpass -p karaf ssh -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay"
+ sshpass -p karaf ssh -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa"
+ sshpass -p karaf ssh -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt"
+ sshpass -p karaf ssh -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager"
+ sshpass -p karaf ssh -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager"
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:$ONOS_API_PORT/onos/v1/network/configuration --data @${localSadisConfigFile}
+ """
+ }
+ }
+
+ stage('Reinstall OLT software') {
+ when {
+ expression { params.reinstallOlt }
+ }
+ steps {
+ script {
+ deployment_config.olts.each { olt ->
+ sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'"
+ waitUntil {
+ olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
+ return olt_sw_present.toInteger() == 0
+ }
+ if ( params.branch == 'voltha-2.3' ) {
+ oltDebVersion = oltDebVersionVoltha23
+ } else {
+ oltDebVersion = oltDebVersionMaster
+ }
+ sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --install ${oltDebVersion}'"
+ waitUntil {
+ olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
+ return olt_sw_present.toInteger() == 1
+ }
+ if ( olt.fortygig ) {
+ // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
+ sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'echo port ce128 sp=40000 >> /broadcom/qax.soc ; /opt/bcm68620/svk_init.sh'"
+ }
+ }
+ }
+ }
+ }
+
+ stage('Restart OLT processes') {
+ steps {
+ script {
+ deployment_config.olts.each { olt ->
+ sh returnStdout: false, script: """
+ ssh-keyscan -H ${olt.ip} >> ~/.ssh/known_hosts
+ sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; reboot'
+ sleep 120
+ """
+ waitUntil {
+ onu_discovered = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'grep \"onu discover indication\" /var/log/openolt.log | wc -l'"
+ return onu_discovered.toInteger() > 0
+ }
+ }
+ }
+ }
+ }
+
+ stage('Run E2E Tests') {
+ environment {
+ ROBOT_CONFIG_FILE="${localDeploymentConfigFile}"
+ ROBOT_MISC_ARGS="${params.extraRobotArgs} --removekeywords wuks -d $WORKSPACE/RobotLogs -v container_log_dir:$WORKSPACE "
+ ROBOT_FILE="Voltha_PODTests.robot"
+ }
+ steps {
+ sh returnStdout: false, script: """
+ mkdir -p $WORKSPACE/RobotLogs
+
+ # If the Gerrit comment contains a line with "functional tests" then run the full
+ # functional test suite. This covers tests tagged either 'sanity' or 'functional'.
+ # Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line
+ REGEX="functional tests"
+ if [[ "$GERRIT_EVENT_COMMENT_TEXT" =~ \$REGEX ]]; then
+ ROBOT_MISC_ARGS+="-i functional"
+ fi
+ # Likewise for dataplane tests
+ REGEX="dataplane tests"
+ if [[ "$GERRIT_EVENT_COMMENT_TEXT" =~ \$REGEX ]]; then
+ ROBOT_MISC_ARGS+="-i dataplane"
+ fi
+
+ make -C $WORKSPACE/voltha-system-tests voltha-test || true
+ """
+ }
+ }
+
+ stage('After-Test Delay') {
+ when {
+ expression { params.manualBranch == "" }
+ }
+ steps {
+ sh returnStdout: false, script: """
+ # Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line
+ REGEX="hardware test with delay\$"
+ [[ "$GERRIT_EVENT_COMMENT_TEXT" =~ \$REGEX ]] && sleep 10m || true
+ """
+ }
+ }
+ }
+
+ post {
+ always {
+ sh returnStdout: false, script: '''
+ set +e
+ cp $WORKSPACE/kind-voltha/install-minimal.log $WORKSPACE/
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq
+ kubectl get nodes -o wide
+ kubectl get pods -o wide
+ kubectl get pods -n voltha -o wide
+
+ sync
+ pkill kail || true
+
+ ## Pull out errors from log files
+ extract_errors_go() {
+ echo
+ echo "Error summary for $1:"
+ grep $1 $WORKSPACE/onos-voltha-combined.log | grep '"level":"error"' | cut -d ' ' -f 2- | jq -r '.msg'
+ echo
+ }
+
+ extract_errors_python() {
+ echo
+ echo "Error summary for $1:"
+ grep $1 $WORKSPACE/onos-voltha-combined.log | grep 'ERROR' | cut -d ' ' -f 2-
+ echo
+ }
+
+ extract_errors_go voltha-rw-core > $WORKSPACE/error-report.log
+ extract_errors_go adapter-open-olt >> $WORKSPACE/error-report.log
+ extract_errors_python adapter-open-onu >> $WORKSPACE/error-report.log
+ extract_errors_python voltha-ofagent >> $WORKSPACE/error-report.log
+
+ gzip $WORKSPACE/onos-voltha-combined.log
+
+ ## collect events, the chart should be running by now
+ kubectl get pods | grep -i voltha-kafka-dump | grep -i running
+ if [[ $? == 0 ]]; then
+ kubectl exec -it `kubectl get pods | grep -i voltha-kafka-dump | grep -i running | cut -f1 -d " "` ./voltha-dump-events.sh > $WORKSPACE/voltha-events.log
+ fi
+ '''
+ script {
+ deployment_config.olts.each { olt ->
+ sh returnStdout: false, script: """
+ until sshpass -p ${olt.pass} scp ${olt.user}@${olt.ip}:/var/log/openolt.log $WORKSPACE/openolt-${olt.ip}.log
+ do
+ echo "Fetching openolt.log log failed, retrying..."
+ sleep 10
+ done
+ sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt-${olt.ip}.log # Remove escape sequences
+ until sshpass -p ${olt.pass} scp ${olt.user}@${olt.ip}:/var/log/dev_mgmt_daemon.log $WORKSPACE/dev_mgmt_daemon-${olt.ip}.log
+ do
+ echo "Fetching dev_mgmt_daemon.log failed, retrying..."
+ sleep 10
+ done
+ sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/dev_mgmt_daemon-${olt.ip}.log # Remove escape sequences
+ """
+ }
+ }
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: 'RobotLogs/log*.html',
+ otherFiles: '',
+ outputFileName: 'RobotLogs/output*.xml',
+ outputPath: '.',
+ passThreshold: 100,
+ reportFileName: 'RobotLogs/report*.html',
+ unstableThreshold: 0]);
+ archiveArtifacts artifacts: '*.log,*.gz'
+ }
+ }
+}