Merge "Using custom chart in multi-stack scale pipeline Escaping $bbsim variable when collecting logs Running the multi-stack with 512 ONU x 2 OLTs x 2 stacks"
diff --git a/jjb/cord-test/voltha.yaml b/jjb/cord-test/voltha.yaml
index 1434069..cc6874c 100644
--- a/jjb/cord-test/voltha.yaml
+++ b/jjb/cord-test/voltha.yaml
@@ -412,7 +412,8 @@
Jenkinsfile: 'Jenkinsfile-voltha-test'
profile: '1T4GEM'
- # Demo pod with xgs-pon olt/onu - master 1T8GEM tech profile and openonu go and timer based job
+ # Demo pod with xgs-pon olt/onu - master 1T4GEM tech profile and openonu go and timer based job
+ # Name extension says DT but is actually an ATT test, dont' want to change all the file names
- 'build_voltha_pod_release_timer':
build-node: 'menlo-demo-pod'
config-pod: 'onf-demo-pod-openonugo'
@@ -421,28 +422,27 @@
num-of-onos: '3'
num-of-atomix: '3'
name-extension: '_DT_openonugo'
- work-flow: 'DT'
test-repo: 'voltha-system-tests'
Jenkinsfile: 'Jenkinsfile-voltha-build'
configurePod: true
- profile: '1T8GEM'
+ profile: '1T4GEM'
in-band-management: true
time: '10'
- # Demo POD test job - master versions, uses 1T8GEM tech profile and openonu go on voltha branch
+ # Demo POD test job - master versions, uses 1T4GEM tech profile and openonu go on voltha branch
+ # Name extension says DT but is actually an ATT test, dont' want to change all the file names
- 'build_voltha_pod_test':
build-node: 'menlo-demo-pod'
config-pod: 'onf-demo-pod-openonugo'
name-extension: '_DT_openonugo'
- work-flow: 'DT'
release: 'master'
branch: 'master'
test-repo: 'voltha-system-tests'
- profile: '1T8GEM'
+ profile: '1T4GEM'
in-band-management: true
power-switch: True
- pipeline-script: 'voltha-dt-physical-functional-tests-openonu-go.groovy'
+ pipeline-script: 'voltha-physical-functional-tests-openonu-go.groovy'
# Menlo DEMO-POD - Default TechProfile - manual build job
- 'build_pod_manual':
diff --git a/jjb/pipeline/voltha-physical-functional-tests-openonu-go.groovy b/jjb/pipeline/voltha-physical-functional-tests-openonu-go.groovy
new file mode 100644
index 0000000..6850bc2
--- /dev/null
+++ b/jjb/pipeline/voltha-physical-functional-tests-openonu-go.groovy
@@ -0,0 +1,273 @@
+// Copyright 2017-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+node {
+ // Need this so that deployment_config has global scope when it's read later
+ deployment_config = null
+}
+
+pipeline {
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: 380, unit: 'MINUTES')
+ }
+
+ environment {
+ KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
+ VOLTCONFIG="$HOME/.volt/config-minimal"
+ PATH="$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+ }
+ stages {
+ stage('Clone kind-voltha') {
+ steps {
+ step([$class: 'WsCleanup'])
+ checkout([
+ $class: 'GitSCM',
+ userRemoteConfigs: [[
+ url: "https://gerrit.opencord.org/kind-voltha",
+ refspec: "${kindVolthaChange}"
+ ]],
+ branches: [[ name: "master", ]],
+ extensions: [
+ [$class: 'WipeWorkspace'],
+ [$class: 'RelativeTargetDirectory', relativeTargetDir: "kind-voltha"],
+ [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+ ],
+ ])
+ }
+ }
+ stage('Clone voltha-system-tests') {
+ steps {
+ checkout([
+ $class: 'GitSCM',
+ userRemoteConfigs: [[
+ url: "https://gerrit.opencord.org/voltha-system-tests",
+ refspec: "${volthaSystemTestsChange}"
+ ]],
+ branches: [[ name: "${branch}", ]],
+ extensions: [
+ [$class: 'WipeWorkspace'],
+ [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"],
+ [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+ ],
+ ])
+ }
+ }
+ stage('Clone cord-tester') {
+ steps {
+ checkout([
+ $class: 'GitSCM',
+ userRemoteConfigs: [[
+ url: "https://gerrit.opencord.org/cord-tester",
+ refspec: "${cordTesterChange}"
+ ]],
+ branches: [[ name: "master", ]],
+ extensions: [
+ [$class: 'WipeWorkspace'],
+ [$class: 'RelativeTargetDirectory', relativeTargetDir: "cord-tester"],
+ [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false],
+ ],
+ ])
+ }
+ }
+ stage('Download All the VOLTHA repos') {
+ when {
+ expression {
+ return "${branch}" == 'master';
+ }
+ }
+ steps {
+ checkout(changelog: true,
+ poll: false,
+ scm: [$class: 'RepoScm',
+ manifestRepositoryUrl: "${params.manifestUrl}",
+ manifestBranch: "${params.branch}",
+ currentBranch: true,
+ destinationDir: 'voltha',
+ forceSync: true,
+ resetFirst: true,
+ quiet: true,
+ jobs: 4,
+ showAllChanges: true]
+ )
+ }
+ }
+ stage ('Initialize') {
+ steps {
+ sh returnStdout: false, script: "git clone -b master ${cordRepoUrl}/${configBaseDir}"
+ script {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ }
+ sh returnStdout: false, script: """
+ mkdir -p $WORKSPACE/bin
+ bash <( curl -sfL https://raw.githubusercontent.com/boz/kail/master/godownloader.sh) -b "$WORKSPACE/bin"
+ cd $WORKSPACE
+ if [ "${params.branch}" != "master" ]; then
+ cd $WORKSPACE/kind-voltha
+ source releases/${params.branch}
+ else
+ VOLTCTL_VERSION=\$(curl -sSL https://api.github.com/repos/opencord/voltctl/releases/latest | jq -r .tag_name | sed -e 's/^v//g')
+ fi
+
+ HOSTOS=\$(uname -s | tr "[:upper:]" "[:lower:"])
+ HOSTARCH=\$(uname -m | tr "[:upper:]" "[:lower:"])
+ if [ \$HOSTARCH == "x86_64" ]; then
+ HOSTARCH="amd64"
+ fi
+ curl -o $WORKSPACE/bin/voltctl -sSL https://github.com/opencord/voltctl/releases/download/v\${VOLTCTL_VERSION}/voltctl-\${VOLTCTL_VERSION}-\${HOSTOS}-\${HOSTARCH}
+ chmod 755 $WORKSPACE/bin/voltctl
+ voltctl version --clientonly
+
+ if [ "${params.branch}" == "master" ]; then
+ # Default kind-voltha config doesn't work on ONF demo pod for accessing kvstore.
+ # The issue is that the mgmt node is also one of the k8s nodes and so port forwarding doesn't work.
+ # We should change this. In the meantime here is a workaround.
+ set +e
+
+ # Remove noise from voltha-core logs
+ voltctl log level set WARN read-write-core#github.com/opencord/voltha-go/db/model
+ voltctl log level set WARN read-write-core#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+ # Remove noise from openolt logs
+ voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/db
+ voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/probe
+ voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+ fi
+ """
+ }
+ }
+
+ stage('Functional Tests') {
+ environment {
+ ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ ROBOT_FILE="Voltha_PODTests.robot"
+ ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/FunctionalTests"
+ }
+ steps {
+ sh """
+ cd $WORKSPACE/kind-voltha/scripts
+ ./log-collector.sh > /dev/null &
+ ./log-combine.sh > /dev/null &
+
+ mkdir -p $ROBOT_LOGS_DIR
+ if ( ${powerSwitch} ); then
+ export ROBOT_MISC_ARGS="--removekeywords wuks -i PowerSwitch -i sanity -i functional -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE"
+ else
+ export ROBOT_MISC_ARGS="--removekeywords wuks -e PowerSwitch -i sanity -i functional -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE"
+ fi
+ make -C $WORKSPACE/voltha-system-tests voltha-test || true
+ """
+ }
+ }
+
+ stage('Dataplane Tests') {
+ environment {
+ ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ ROBOT_FILE="Voltha_PODTests.robot"
+ ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/DataplaneTests"
+ }
+ steps {
+ sh """
+ mkdir -p $ROBOT_LOGS_DIR
+ export ROBOT_MISC_ARGS="--removekeywords wuks -i dataplane -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE"
+ make -C $WORKSPACE/voltha-system-tests voltha-test || true
+ """
+ }
+ }
+
+ }
+ post {
+ always {
+ sh returnStdout: false, script: '''
+ set +e
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq
+ kubectl get nodes -o wide
+ kubectl get pods -n voltha -o wide
+ kubectl get pods -o wide
+
+ sleep 60 # Wait for log-collector and log-combine to complete
+
+ # Clean up "announcer" pod used by the tests if present
+ kubectl delete pod announcer || true
+
+ ## Pull out errors from log files
+ extract_errors_go() {
+ echo
+ echo "Error summary for $1:"
+ grep '"level":"error"' $WORKSPACE/kind-voltha/scripts/logger/combined/$1*
+ echo
+ }
+
+ extract_errors_python() {
+ echo
+ echo "Error summary for $1:"
+ grep 'ERROR' $WORKSPACE/kind-voltha/scripts/logger/combined/$1*
+ echo
+ }
+
+ extract_errors_go voltha-rw-core > $WORKSPACE/error-report.log
+ extract_errors_go adapter-open-olt >> $WORKSPACE/error-report.log
+ extract_errors_python adapter-open-onu >> $WORKSPACE/error-report.log
+ extract_errors_python voltha-ofagent >> $WORKSPACE/error-report.log
+ extract_errors_python onos >> $WORKSPACE/error-report.log
+
+ gzip error-report.log || true
+ rm error-report.log || true
+
+ cd $WORKSPACE/kind-voltha/scripts/logger/combined/
+ tar czf $WORKSPACE/container-logs.tgz *
+ rm * || true
+
+ cd $WORKSPACE
+ gzip *-combined.log || true
+ rm *-combined.log || true
+
+ # collect ETCD cluster logs
+ mkdir -p $WORKSPACE/etcd
+ printf '%s\n' $(kubectl get pods -l app=etcd -o=jsonpath="{.items[*]['metadata.name']}") | xargs -I% bash -c "kubectl logs % > $WORKSPACE/etcd/%.log"
+ '''
+ script {
+ deployment_config.olts.each { olt ->
+ sh returnStdout: false, script: """
+ sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/openolt.log $WORKSPACE/openolt-${olt.sship}.log || true
+ sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt-${olt.sship}.log # Remove escape sequences
+ sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/dev_mgmt_daemon.log $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log || true
+ sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log # Remove escape sequences
+ sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/startup.log $WORKSPACE/startup-${olt.sship}.log || true
+ sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/startup-${olt.sship}.log || true # Remove escape sequences
+ sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/openolt_process_watchdog.log $WORKSPACE/openolt_process_watchdog-${olt.sship}.log || true
+ sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt_process_watchdog-${olt.sship}.log || true # Remove escape sequences
+ """
+ }
+ }
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: '**/log*.html',
+ otherFiles: '',
+ outputFileName: '**/output*.xml',
+ outputPath: 'RobotLogs',
+ passThreshold: 100,
+ reportFileName: '**/report*.html',
+ unstableThreshold: 0
+ ]);
+ archiveArtifacts artifacts: '*.log,*.gz,*.tgz,etcd/*.log'
+ }
+ unstable {
+ step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false])
+ }
+ }
+}
diff --git a/jjb/verify/ntt-workflow-driver.yaml b/jjb/verify/ntt-workflow-driver.yaml
new file mode 100644
index 0000000..ad0f9e3
--- /dev/null
+++ b/jjb/verify/ntt-workflow-driver.yaml
@@ -0,0 +1,29 @@
+---
+# verification jobs for 'ntt-workflow-driver' repo
+
+- project:
+ name: ntt-workflow-driver
+ project: '{name}'
+
+ jobs:
+ - 'verify-ntt-workflow-driver-jobs':
+ branch-regexp: '{all-branches-regexp}'
+ - 'publish-ntt-workflow-driver-jobs'
+
+- job-group:
+ name: 'verify-ntt-workflow-driver-jobs'
+ jobs:
+ - 'verify-licensed'
+ - 'tag-collision-reject':
+ dependency-jobs: 'verify_ntt-workflow-driver_licensed'
+ - 'xos-unit-test':
+ dependency-jobs: 'verify_ntt-workflow-driver_tag-collision'
+ - 'xos-service-upgrade':
+ dependency-jobs: 'verify_ntt-workflow-driver-unit-test'
+
+- job-group:
+ name: 'publish-ntt-workflow-driver-jobs'
+ jobs:
+ - 'docker-publish':
+ docker-repo: 'xosproject'
+ dependency-jobs: 'version-tag'
diff --git a/jjb/verify/voltha-epononu-adapter.yaml b/jjb/verify/voltha-epononu-adapter.yaml
new file mode 100644
index 0000000..f0e8cda
--- /dev/null
+++ b/jjb/verify/voltha-epononu-adapter.yaml
@@ -0,0 +1,30 @@
+---
+# verification jobs for 'voltha-epononu-adapter' repo
+
+- project:
+ name: voltha-epononu-adapter
+ project: '{name}'
+
+ jobs:
+ - 'verify-voltha-epononu-adapter-jobs':
+ branch-regexp: '{all-branches-regexp}'
+ - 'publish-voltha-epononu-adapter-jobs':
+ branch-regexp: '{all-branches-regexp}'
+
+- job-group:
+ name: 'verify-voltha-epononu-adapter-jobs'
+ jobs:
+ - 'verify-licensed'
+ - 'tag-collision-reject':
+ dependency-jobs: 'verify_voltha-epononu-adapter_licensed'
+ - 'make-unit-test':
+ unit-test-targets: 'test'
+ unit-test-keep-going: 'true'
+
+- job-group:
+ name: 'publish-voltha-epononu-adapter-jobs'
+ jobs:
+ - 'docker-publish':
+ build-timeout: 30
+ docker-repo: 'voltha'
+ dependency-jobs: 'version-tag'