[VOL-3780] Syntax and param fix on the physical build pipeline
Change-Id: I9f5c799ff89c17c839b0bbafb72ec2927e9ba8c7
diff --git a/jjb/pipeline/voltha/master/physical-build.groovy b/jjb/pipeline/voltha/master/physical-build.groovy
index 573efa7..63c24b6 100644
--- a/jjb/pipeline/voltha/master/physical-build.groovy
+++ b/jjb/pipeline/voltha/master/physical-build.groovy
@@ -36,260 +36,291 @@
}
environment {
PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
- KUBECONFIG="$HOME/.kube/kind-config-${clusterName}"
+ KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
}
stages{
stage('Download Code') {
- getVolthaCode([
- branch: "${branch}",
- volthaHelmChartsChange: "${volthaHelmChartsChange}",
- ])
+ steps {
+ getVolthaCode([
+ branch: "${branch}",
+ volthaHelmChartsChange: "${volthaHelmChartsChange}",
+ ])
+ }
}
stage ("Parse deployment configuration file") {
- sh returnStdout: true, script: "rm -rf ${configBaseDir}"
- sh returnStdout: true, script: "git clone -b master ${cordRepoUrl}/${configBaseDir}"
- if ( params.workFlow == "DT" ) {
- deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
- }
- else if ( params.workFlow == "TT" )
- {
- deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
- }
- else
- {
- deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ steps {
+ sh returnStdout: true, script: "rm -rf ${configBaseDir}"
+ sh returnStdout: true, script: "git clone -b master ${cordRepoUrl}/${configBaseDir}"
+ script {
+ if ( params.workFlow == "DT" ) {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
+ }
+ else if ( params.workFlow == "TT" )
+ {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
+ }
+ else
+ {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ }
+ }
}
}
stage('Clean up') {
- timeout(15) {
- script {
- helmTeardown(["default", infraNamespace, volthaNamespace])
- }
- timeout(1) {
- sh returnStdout: false, script: '''
- # remove orphaned port-forward from different namespaces
- ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9
- '''
+ steps {
+ timeout(15) {
+ script {
+ helmTeardown(["default", infraNamespace, volthaNamespace])
+ }
+ timeout(1) {
+ sh returnStdout: false, script: '''
+ # remove orphaned port-forward from different namespaces
+ ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9
+ '''
+ }
}
}
}
stage('Install Voltha') {
- timeout(20) {
+ steps {
+ timeout(20) {
+ script {
+ // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
+ def localCharts = false
+ if (volthaHelmChartsChange != "") {
+ localCharts = true
+ }
- // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
- def localCharts = false
- if (volthaHelmChartsChange != "") {
- localCharts = true
- }
+ def extraHelmFlags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml "
- def extraHelmFlags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml "
-
- // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
- extraHelmFlags = extraHelmFlags + "--set onos-classic.onosSshPort=30115 " +
+ // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
+ extraHelmFlags = extraHelmFlags + "--set onos-classic.onosSshPort=30115 " +
"--set onos-classic.onosApiPort=30120 " +
"--set onos-classic.onosOfPort=31653 " +
"--set onos-classic.individualOpenFlowNodePorts=true "
- volthaDeploy([
- workflow: workFlow.toLowerCase(),
- extraHelmFlags: extraHelmFlags,
- localCharts: localCharts,
- kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
- onosReplica: params.NumOfOnos,
- atomixReplica: params.NumOfAtomix,
- // NOTE does this needs to be configured?
- kafkaReplica: 3,
- etcdReplica: 3,
- ])
- sh """
- JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
- JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd ${params.VolthaEtcdPort}:2379; done"
- JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"
- ps aux | grep port-forward
- """
- getPodsInfo("$WORKSPACE")
- }
- }
- if ( params.configurePod && params.profile != "Default" ) {
- stage('Push Tech-Profile') {
- for(int i=0; i < deployment_config.olts.size(); i++) {
- def tech_prof_directory = "XGS-PON"
- // If no debian package is specified we default to GPON for the ADTRAN OLT.
- if (!deployment_config.olts[i].containsKey("oltDebVersion") || deployment_config.olts[i].oltDebVersion.contains("asgvolt64")){
- tech_prof_directory = "GPON"
- }
- timeout(1) {
- sh returnStatus: true, script: """
- export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
- etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
- if [[ "${workFlow}" == "TT" ]]; then
- kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json
- kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
- kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json
- kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65'
- kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST.json \$etcd_container:/tmp/mcast.json
- kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66'
- else
- kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json \$etcd_container:/tmp/flexpod.json
- kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
- fi
- """
- }
- timeout(1) {
- sh returnStatus: true, script: """
- export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
- etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
- kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/technology_profiles/${tech_prof_directory}/64'
- """
- }
- }
- }
- }
- stage('Push MIB templates') {
- sh """
- export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
- etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
- kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Alpha.json \$etcd_container:/tmp/MIB_Alpha.json
- kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
- kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
- kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Scom.json \$etcd_container:/tmp/MIB_Scom.json
- kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/SCOM/Glasfaser-Modem/090140.1.0.304'
- kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/SCOM/Glasfaser-Modem/090140.1.0.304'
- """
- }
- stage('Push Sadis-config') {
- timeout(1) {
- sh returnStatus: true, script: """
- if [[ "${workFlow}" == "DT" ]]; then
- curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json
- elif [[ "${workFlow}" == "TT" ]]; then
- curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json
- else
- # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file
- curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
- fi
- """
- }
- }
- if ( deployment_config.fabric_switches.size() > 0 ) {
- stage('Switch Configurations in ONOS') {
- timeout(1) {
- def netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch.json"
- if (params.inBandManagement){
- netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch-inband.json"
+ volthaDeploy([
+ workflow: workFlow.toLowerCase(),
+ extraHelmFlags: extraHelmFlags,
+ localCharts: localCharts,
+ kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
+ onosReplica: params.NumOfOnos,
+ atomixReplica: params.NumOfAtomix,
+ // NOTE does this needs to be configured?
+ kafkaReplica: 3,
+ etcdReplica: 3,
+ ])
}
sh """
- curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @${netcfg}
- curl -sSL --user karaf:karaf -X POST http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting/active
+ JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
+ JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd ${params.VolthaEtcdPort}:2379; done"&
+ JENKINS_NODE_COOKIE="dontKillMe" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
+ ps aux | grep port-forward
"""
+ getPodsInfo("$WORKSPACE")
}
- timeout(1) {
- waitUntil {
- sr_active_out = sh returnStatus: true, script: """
- sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay"
- sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa"
- sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt"
- sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager"
- sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager"
- curl -sSL --user karaf:karaf -X GET http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting | jq '.state' | grep ACTIVE
- sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled false"
- sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.flow.impl.FlowRuleManager purgeOnDisconnection false"
- sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.meter.impl.MeterManager purgeOnDisconnection false"
- """
- return sr_active_out == 0
- }
- }
- timeout(5) {
- for(int i=0; i < deployment_config.hosts.src.size(); i++) {
- for(int j=0; j < deployment_config.olts.size(); j++) {
- def aggPort = -1
- if(deployment_config.olts[j].serial == deployment_config.hosts.src[i].olt){
- aggPort = deployment_config.olts[j].aggPort
- if(aggPort == -1){
- throw new Exception("Upstream port for the olt is not configured, field aggPort is empty")
- }
- sh """
- sleep 30 # NOTE why are we sleeping?
- curl -X POST --user karaf:karaf --header 'Content-Type: application/json' --header 'Accept: application/json' -d '{"deviceId": "${deployment_config.fabric_switches[0].device_id}", "vlanId": "${deployment_config.hosts.src[i].s_tag}", "endpoints": [${deployment_config.fabric_switches[0].bngPort},${aggPort}]}' 'http://${deployment_config.nodes[0].ip}:30120/onos/segmentrouting/xconnect'
- """
+ }
+ }
+ stage('Push Tech-Profile') {
+ steps {
+ script {
+ if ( params.configurePod && params.profile != "Default" ) {
+ for(int i=0; i < deployment_config.olts.size(); i++) {
+ def tech_prof_directory = "XGS-PON"
+ // If no debian package is specified we default to GPON for the ADTRAN OLT.
+ if (!deployment_config.olts[i].containsKey("oltDebVersion") || deployment_config.olts[i].oltDebVersion.contains("asgvolt64")){
+ tech_prof_directory = "GPON"
+ }
+ timeout(1) {
+ sh returnStatus: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
+ if [[ "${workFlow}" == "TT" ]]; then
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65'
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST.json \$etcd_container:/tmp/mcast.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66'
+ else
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json \$etcd_container:/tmp/flexpod.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
+ fi
+ """
+ }
+ timeout(1) {
+ sh returnStatus: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/technology_profiles/${tech_prof_directory}/64'
+ """
}
}
}
}
}
}
- if ( params.reinstallOlt ) {
- stage('Reinstall OLT software') {
- for(int i=0; i < deployment_config.olts.size(); i++) {
- // NOTE what is oltDebVersion23? is that for VOLTHA-2.3? do we still need this differentiation?
- sh returnStdout: true, script: """
- if [[ "${branch}" != "master" ]] && [[ "${params.inBandManagement}" == "true" ]]; then
- ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
- sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
- sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion23}"
+ stage('Push MIB templates') {
+ steps {
+ sh """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Alpha.json \$etcd_container:/tmp/MIB_Alpha.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
+ kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Scom.json \$etcd_container:/tmp/MIB_Scom.json
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/SCOM/Glasfaser-Modem/090140.1.0.304'
+ kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/SCOM/Glasfaser-Modem/090140.1.0.304'
+ """
+ }
+ }
+ stage('Push Sadis-config') {
+ steps {
+ timeout(1) {
+ sh returnStatus: true, script: """
+ if [[ "${workFlow}" == "DT" ]]; then
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json
+ elif [[ "${workFlow}" == "TT" ]]; then
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json
+ else
+ # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
fi
- if [[ "${branch}" != "master" ]] && [[ "${params.inBandManagement}" == "false" ]]; then
- ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
- sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion23}"
- fi
- if [[ "${branch}" == "master" ]] && [[ "${params.inBandManagement}" == "true" ]]; then
- ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
- sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
- sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
- fi
- if [[ "${branch}" == "master" ]] && [[ "${params.inBandManagement}" == "false" ]]; then
- ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
- sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
- fi
- sleep 10
"""
- timeout(5) {
- waitUntil {
- olt_sw_present = sh returnStdout: true, script: """
- if [ "${deployment_config.olts[i].oltDebVersion}" == *"asfvolt16"* ]; then
- sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asfvolt16 | wc -l'
- else
- sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asgvolt64 | wc -l'
- fi
- if (${deployment_config.olts[i].fortygig}); then
- if [[ "${params.inBandManagement}" == "true" ]]; then
- ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
- sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'mkdir -p /opt/openolt/'
- sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/watchdog-script/* /opt/openolt/'
- sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/bal_cli_appl/example_user_appl /broadcom'
- sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp in-band-startup-script/* /etc/init.d/'
- fi
- fi
+ }
+ }
+ }
+ stage('Switch Configurations in ONOS') {
+ steps {
+ script {
+ if ( deployment_config.fabric_switches.size() > 0 ) {
+ timeout(1) {
+ def netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch.json"
+ if (params.inBandManagement){
+ netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch-inband.json"
+ }
+ sh """
+ curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @${netcfg}
+ curl -sSL --user karaf:karaf -X POST http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting/active
"""
- return olt_sw_present.toInteger() > 0
+ }
+ timeout(1) {
+ waitUntil {
+ sr_active_out = sh returnStatus: true, script: """
+ sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay"
+ sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa"
+ sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt"
+ sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager"
+ sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager"
+ curl -sSL --user karaf:karaf -X GET http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting | jq '.state' | grep ACTIVE
+ sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled false"
+ sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.flow.impl.FlowRuleManager purgeOnDisconnection false"
+ sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.meter.impl.MeterManager purgeOnDisconnection false"
+ """
+ return sr_active_out == 0
+ }
+ }
+ timeout(5) {
+ for(int i=0; i < deployment_config.hosts.src.size(); i++) {
+ for(int j=0; j < deployment_config.olts.size(); j++) {
+ def aggPort = -1
+ if(deployment_config.olts[j].serial == deployment_config.hosts.src[i].olt){
+ aggPort = deployment_config.olts[j].aggPort
+ if(aggPort == -1){
+ throw new Exception("Upstream port for the olt is not configured, field aggPort is empty")
+ }
+ sh """
+ sleep 30 # NOTE why are we sleeping?
+ curl -X POST --user karaf:karaf --header 'Content-Type: application/json' --header 'Accept: application/json' -d '{"deviceId": "${deployment_config.fabric_switches[0].device_id}", "vlanId": "${deployment_config.hosts.src[i].s_tag}", "endpoints": [${deployment_config.fabric_switches[0].bngPort},${aggPort}]}' 'http://${deployment_config.nodes[0].ip}:30120/onos/segmentrouting/xconnect'
+ """
+ }
+ }
+ }
}
}
}
}
- stage('Restart OLT processes') {
- for(int i=0; i < deployment_config.olts.size(); i++) {
- int waitTimerForOltUp = 360
- if ( params.inBandManagement ) {
- waitTimerForOltUp = 540
- }
- timeout(15) {
- sh returnStdout: true, script: """
- ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
- sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; rm -f /var/log/openolt_process_watchdog.log; reboot' || true
- sleep ${waitTimerForOltUp}
- """
- }
- timeout(15) {
- waitUntil {
- devprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep dev_mgmt_daemon | wc -l'"
- return devprocess.toInteger() > 0
+ }
+ stage('Reinstall OLT software') {
+ steps {
+ script {
+ if ( params.reinstallOlt ) {
+ for(int i=0; i < deployment_config.olts.size(); i++) {
+ // NOTE what is oltDebVersion23? is that for VOLTHA-2.3? do we still need this differentiation?
+ sh returnStdout: true, script: """
+ if [[ "${branch}" != "master" ]] && [[ "${params.inBandManagement}" == "true" ]]; then
+ ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion23}"
+ fi
+ if [[ "${branch}" != "master" ]] && [[ "${params.inBandManagement}" == "false" ]]; then
+ ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion23}"
+ fi
+ if [[ "${branch}" == "master" ]] && [[ "${params.inBandManagement}" == "true" ]]; then
+ ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
+ fi
+ if [[ "${branch}" == "master" ]] && [[ "${params.inBandManagement}" == "false" ]]; then
+ ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
+ fi
+ sleep 10
+ """
+ timeout(5) {
+ waitUntil {
+ olt_sw_present = sh returnStdout: true, script: """
+ if [ "${deployment_config.olts[i].oltDebVersion}" == *"asfvolt16"* ]; then
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asfvolt16 | wc -l'
+ else
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asgvolt64 | wc -l'
+ fi
+ if (${deployment_config.olts[i].fortygig}); then
+ if [[ "${params.inBandManagement}" == "true" ]]; then
+ ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'mkdir -p /opt/openolt/'
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/watchdog-script/* /opt/openolt/'
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/bal_cli_appl/example_user_appl /broadcom'
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp in-band-startup-script/* /etc/init.d/'
+ fi
+ fi
+ """
+ return olt_sw_present.toInteger() > 0
+ }
+ }
}
}
- timeout(15) {
- waitUntil {
- openoltprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep openolt | wc -l'"
- return openoltprocess.toInteger() > 0
+ }
+ }
+ }
+ stage('Restart OLT processes') {
+ steps {
+ script {
+ for(int i=0; i < deployment_config.olts.size(); i++) {
+ int waitTimerForOltUp = 360
+ if ( params.inBandManagement ) {
+ waitTimerForOltUp = 540
+ }
+ timeout(15) {
+ sh returnStdout: true, script: """
+ ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; rm -f /var/log/openolt_process_watchdog.log; reboot' || true
+ sleep ${waitTimerForOltUp}
+ """
+ }
+ timeout(15) {
+ waitUntil {
+ devprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep dev_mgmt_daemon | wc -l'"
+ return devprocess.toInteger() > 0
+ }
+ }
+ timeout(15) {
+ waitUntil {
+ openoltprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep openolt | wc -l'"
+ return openoltprocess.toInteger() > 0
+ }
}
}
}
diff --git a/jjb/voltha-test/voltha.yaml b/jjb/voltha-test/voltha.yaml
index bd4239d..607b2bf 100644
--- a/jjb/voltha-test/voltha.yaml
+++ b/jjb/voltha-test/voltha.yaml
@@ -34,6 +34,7 @@
num-of-openonu: '1'
num-of-onos: '3'
num-of-atomix: '3'
+ VolthaEtcdPort: 9999
test-repo: 'voltha-system-tests'
Jenkinsfile: 'Jenkinsfile-voltha-build'
profile: '1T4GEM'
@@ -72,6 +73,9 @@
config-pod: 'flex-ocp-cord'
profile: 'Default'
time: '4'
+ VolthaEtcdPort: 9999
+ num-of-onos: '3'
+ num-of-atomix: '3'
# flex pod1 test job - uses tech profile on voltha branch
- 'build_voltha_pod_test':
@@ -97,6 +101,7 @@
configurePod: true
profile: '1T4GEM'
time: '1'
+ VolthaEtcdPort: 9999
# flex pod1 test job - released versions: uses tech profile on voltha branch
- 'build_voltha_pod_test':
@@ -124,6 +129,7 @@
configurePod: true
profile: 'TP'
time: '22'
+ VolthaEtcdPort: 9999
# flex pod1 test job - released versions: uses tech profile on voltha branch
- 'build_voltha_pod_test':
@@ -148,6 +154,9 @@
work-flow: 'TT'
profile: 'TP'
time: '9'
+ VolthaEtcdPort: 9999
+ num-of-onos: '3'
+ num-of-atomix: '3'
# flex pod1 test job - released versions: uses tech profile on voltha branch
- 'build_voltha_pod_test':
@@ -158,7 +167,6 @@
name-extension: '_TT'
work-flow: 'TT'
power-switch: True
- # TODO do we need different test pipelines for different tests?
pipeline-script: 'voltha-tt-physical-functional-tests.groovy'
test-repo: 'voltha-system-tests'
profile: 'TP'
@@ -221,7 +229,7 @@
Jenkinsfile: 'Jenkinsfile-voltha-build'
configurePod: true
profile: '1T8GEM'
- VolthaEtcdPort: '9999'
+ VolthaEtcdPort: 9999
in-band-management: true
time: '7'