| // Copyright 2017-present Open Networking Foundation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| node { |
| // Need this so that deployment_config has global scope when it's read later |
| deployment_config = null |
| } |
| |
| pipeline { |
| /* no label, executor is determined by JJB */ |
| agent { |
| label "${params.buildNode}" |
| } |
| options { |
| timeout(time: 240, unit: 'MINUTES') |
| } |
| |
| environment { |
| KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf" |
| VOLTCONFIG="$HOME/.volt/config-minimal" |
| PATH="$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" |
| } |
| |
| stages { |
| stage('Clone kind-voltha') { |
| steps { |
| step([$class: 'WsCleanup']) |
| checkout([ |
| $class: 'GitSCM', |
| userRemoteConfigs: [[ |
| url: "https://gerrit.opencord.org/kind-voltha", |
| refspec: "${kindVolthaChange}" |
| ]], |
| branches: [[ name: "master", ]], |
| extensions: [ |
| [$class: 'WipeWorkspace'], |
| [$class: 'RelativeTargetDirectory', relativeTargetDir: "kind-voltha"], |
| [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false], |
| ], |
| ]) |
| } |
| } |
| stage('Clone voltha-system-tests') { |
| steps { |
| checkout([ |
| $class: 'GitSCM', |
| userRemoteConfigs: [[ |
| url: "https://gerrit.opencord.org/voltha-system-tests", |
| refspec: "${volthaSystemTestsChange}" |
| ]], |
| branches: [[ name: "${branch}", ]], |
| extensions: [ |
| [$class: 'WipeWorkspace'], |
| [$class: 'RelativeTargetDirectory', relativeTargetDir: "voltha-system-tests"], |
| [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false], |
| ], |
| ]) |
| } |
| } |
| stage('Clone cord-tester') { |
| steps { |
| checkout([ |
| $class: 'GitSCM', |
| userRemoteConfigs: [[ |
| url: "https://gerrit.opencord.org/cord-tester", |
| refspec: "${cordTesterChange}" |
| ]], |
| branches: [[ name: "master", ]], |
| extensions: [ |
| [$class: 'WipeWorkspace'], |
| [$class: 'RelativeTargetDirectory', relativeTargetDir: "cord-tester"], |
| [$class: 'CloneOption', depth: 0, noTags: false, reference: '', shallow: false], |
| ], |
| ]) |
| } |
| } |
| // This checkout allows us to show changes in Jenkins |
| // we only do this on master as we don't branch all the repos for all the releases |
| // (we should compute the difference by tracking the container version, not the code) |
| stage('Download All the VOLTHA repos') { |
| when { |
| expression { |
| return "${branch}" == 'master'; |
| } |
| } |
| steps { |
| checkout(changelog: true, |
| poll: false, |
| scm: [$class: 'RepoScm', |
| manifestRepositoryUrl: "${params.manifestUrl}", |
| manifestBranch: "${params.branch}", |
| currentBranch: true, |
| destinationDir: 'voltha', |
| forceSync: true, |
| resetFirst: true, |
| quiet: true, |
| jobs: 4, |
| showAllChanges: true] |
| ) |
| } |
| } |
| stage ('Initialize') { |
| steps { |
| sh returnStdout: false, script: "git clone -b master ${cordRepoUrl}/${configBaseDir}" |
| script { |
| deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml" |
| } |
| sh returnStdout: false, script: """ |
| mkdir -p $WORKSPACE/bin |
| bash <( curl -sfL https://raw.githubusercontent.com/boz/kail/master/godownloader.sh) -b "$WORKSPACE/bin" |
| cd $WORKSPACE |
| if [ "${params.branch}" != "master" ]; then |
| cd $WORKSPACE/kind-voltha |
| source releases/${params.branch} |
| else |
| VOLTCTL_VERSION=\$(curl -sSL https://api.github.com/repos/opencord/voltctl/releases/latest | jq -r .tag_name | sed -e 's/^v//g') |
| fi |
| |
| HOSTOS=\$(uname -s | tr "[:upper:]" "[:lower:"]) |
| HOSTARCH=\$(uname -m | tr "[:upper:]" "[:lower:"]) |
| if [ \$HOSTARCH == "x86_64" ]; then |
| HOSTARCH="amd64" |
| fi |
| curl -o $WORKSPACE/bin/voltctl -sSL https://github.com/opencord/voltctl/releases/download/v\${VOLTCTL_VERSION}/voltctl-\${VOLTCTL_VERSION}-\${HOSTOS}-\${HOSTARCH} |
| chmod 755 $WORKSPACE/bin/voltctl |
| voltctl version --clientonly |
| |
| |
| # Default kind-voltha config doesn't work on ONF demo pod for accessing kvstore. |
| # The issue is that the mgmt node is also one of the k8s nodes and so port forwarding doesn't work. |
| # We should change this. In the meantime here is a workaround. |
| if [ "${params.branch}" == "master" ]; then |
| set +e |
| |
| |
| # Remove noise from voltha-core logs |
| voltctl log level set WARN read-write-core#github.com/opencord/voltha-go/db/model |
| voltctl log level set WARN read-write-core#github.com/opencord/voltha-lib-go/v3/pkg/kafka |
| # Remove noise from openolt logs |
| voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/db |
| voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/probe |
| voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/kafka |
| fi |
| """ |
| } |
| } |
| |
| stage('Functional Tests') { |
| environment { |
| ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml" |
| ROBOT_FILE="Voltha_DT_PODTests.robot" |
| ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/dt-workflow/FunctionalTests" |
| } |
| steps { |
| sh """ |
| cd $WORKSPACE/kind-voltha/scripts |
| ./log-collector.sh > /dev/null & |
| ./log-combine.sh > /dev/null & |
| |
| mkdir -p $ROBOT_LOGS_DIR |
| if ( ${powerSwitch} ); then |
| export ROBOT_MISC_ARGS="--removekeywords wuks -i PowerSwitch -i sanityDt -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE" |
| else |
| export ROBOT_MISC_ARGS="--removekeywords wuks -e PowerSwitch -i sanityDt -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE" |
| fi |
| make -C $WORKSPACE/voltha-system-tests voltha-dt-test || true |
| """ |
| } |
| } |
| } |
| post { |
| always { |
| sh returnStdout: false, script: ''' |
| set +e |
| kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq |
| kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq |
| kubectl get nodes -o wide |
| kubectl get pods -n voltha -o wide |
| |
| sleep 60 # Wait for log-collector and log-combine to complete |
| |
| # Clean up "announcer" pod used by the tests if present |
| kubectl delete pod announcer || true |
| |
| ## Pull out errors from log files |
| extract_errors_go() { |
| echo |
| echo "Error summary for $1:" |
| grep '"level":"error"' $WORKSPACE/kind-voltha/scripts/logger/combined/$1* |
| echo |
| } |
| |
| extract_errors_python() { |
| echo |
| echo "Error summary for $1:" |
| grep 'ERROR' $WORKSPACE/kind-voltha/scripts/logger/combined/$1* |
| echo |
| } |
| |
| extract_errors_go voltha-rw-core > $WORKSPACE/error-report.log |
| extract_errors_go adapter-open-olt >> $WORKSPACE/error-report.log |
| extract_errors_python adapter-open-onu >> $WORKSPACE/error-report.log |
| extract_errors_python voltha-ofagent >> $WORKSPACE/error-report.log |
| extract_errors_python onos >> $WORKSPACE/error-report.log |
| |
| gzip error-report.log || true |
| |
| cd $WORKSPACE/kind-voltha/scripts/logger/combined/ |
| tar czf $WORKSPACE/container-logs.tgz * |
| |
| cd $WORKSPACE |
| gzip *-combined.log || true |
| |
| # collect ETCD cluster logs |
| mkdir -p $WORKSPACE/etcd |
| printf '%s\n' $(kubectl get pods -l app=etcd -o=jsonpath="{.items[*]['metadata.name']}") | xargs -I@ bash -c "kubectl logs @ > $WORKSPACE/etcd/@.log" |
| ''' |
| script { |
| deployment_config.olts.each { olt -> |
| sh returnStdout: false, script: """ |
| sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/openolt.log $WORKSPACE/openolt-${olt.sship}.log || true |
| sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt-${olt.sship}.log # Remove escape sequences |
| sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/dev_mgmt_daemon.log $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log || true |
| sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log # Remove escape sequences |
| sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/startup.log $WORKSPACE/startup-${olt.sship}.log || true |
| sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/startup-${olt.sship}.log || true # Remove escape sequences |
| sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/openolt_process_watchdog.log $WORKSPACE/openolt_process_watchdog-${olt.sship}.log || true |
| sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt_process_watchdog-${olt.sship}.log || true # Remove escape sequences |
| """ |
| } |
| } |
| step([$class: 'RobotPublisher', |
| disableArchiveOutput: false, |
| logFileName: '**/log*.html', |
| otherFiles: '', |
| outputFileName: '**/output*.xml', |
| outputPath: 'RobotLogs', |
| passThreshold: 100, |
| reportFileName: '**/report*.html', |
| unstableThreshold: 0 |
| ]); |
| archiveArtifacts artifacts: '*.log,*.gz,*.tgz,etcd/*.log' |
| } |
| unstable { |
| step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false]) |
| } |
| } |
| } |