Merge "[VOL-2778] Support for the new BBSim parameter in the scale job an preliminary TT job"
diff --git a/jjb/cord-test/voltha.yaml b/jjb/cord-test/voltha.yaml
index a4b4c48..a942bb1 100644
--- a/jjb/cord-test/voltha.yaml
+++ b/jjb/cord-test/voltha.yaml
@@ -16,6 +16,7 @@
num-of-onos: '1'
num-of-atomix: '0'
reinstall-olt: true
+ test-type: ''
jobs:
# flex OCP pod with olt/onu - manual test job, voltha master build job
@@ -345,10 +346,12 @@
config-pod: 'onf-soak-pod'
release: 'master'
branch: 'master'
+ profile: '1T8GEM'
test-repo: 'voltha-system-tests'
+ name-extension: '_DT'
+ work-flow: 'DT'
Jenkinsfile: 'Jenkinsfile-voltha-build'
configurePod: true
- profile: 'Default'
# ONF Menlo Soak POD test job - voltha-master branch
# FIXME once the soak-pod is back use 'build_voltha_pod_test'
@@ -361,16 +364,33 @@
Jenkinsfile: 'Jenkinsfile-voltha-test'
# ONF Menlo Soak POD test job - voltha-master branch
- # Run tests every two days
+ # Run tests every three days
- 'build_voltha_pod_soak_test':
build-node: 'menlo-soak-pod'
config-pod: 'onf-soak-pod'
- profile: 'Default'
+ profile: '1T8GEM'
branch: 'master'
release: 'master'
- name-extension: 'soak'
+ work-flow: 'DT'
+ name-extension: '_soak_func'
+ test-type: 'Functional'
test-repo: 'voltha-system-tests'
- Jenkinsfile: 'Jenkinsfile-voltha-test'
+ pipeline-script: 'voltha-physical-soak-tests.groovy'
+ time-trigger: "H H */3 * *"
+
+ # ONF Menlo Soak POD test job - voltha-master branch
+ # Run tests every three days
+ - 'build_voltha_pod_soak_test':
+ build-node: 'menlo-soak-pod'
+ config-pod: 'onf-soak-pod'
+ profile: '1T8GEM'
+ branch: 'master'
+ release: 'master'
+ work-flow: 'DT'
+ name-extension: '_soak_fail'
+ test-type: 'Failure'
+ test-repo: 'voltha-system-tests'
+ pipeline-script: 'voltha-physical-soak-tests.groovy'
time-trigger: "H H */3 * *"
# Infosys pod with olt/onu - Default tech profile and timer based job
diff --git a/jjb/pipeline/voltha-physical-soak-tests.groovy b/jjb/pipeline/voltha-physical-soak-tests.groovy
new file mode 100644
index 0000000..0ca9a48
--- /dev/null
+++ b/jjb/pipeline/voltha-physical-soak-tests.groovy
@@ -0,0 +1,239 @@
+// Copyright 2017-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+node {
+ // Need this so that deployment_config has global scope when it's read later
+ deployment_config = null
+}
+
+pipeline {
+ /* no label, executor is determined by JJB */
+ agent {
+ label "${params.buildNode}"
+ }
+ options {
+ timeout(time: 280, unit: 'MINUTES')
+ }
+
+ environment {
+ KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
+ VOLTCONFIG="$HOME/.volt/config-minimal"
+ PATH="$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+ }
+
+ stages {
+ stage ('Initialize') {
+ steps {
+ step([$class: 'WsCleanup'])
+ sh returnStdout: false, script: "git clone -b master ${cordRepoUrl}/${configBaseDir}"
+ sh returnStdout: false, script: "git clone -b master ${cordRepoUrl}/kind-voltha"
+ script {
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ }
+ // This checkout allows us to show changes in Jenkins
+ checkout(changelog: true,
+ poll: false,
+ scm: [$class: 'RepoScm',
+ manifestRepositoryUrl: "${params.manifestUrl}",
+ manifestBranch: "${params.branch}",
+ currentBranch: true,
+ destinationDir: 'voltha',
+ forceSync: true,
+ resetFirst: true,
+ quiet: true,
+ jobs: 4,
+ showAllChanges: true]
+ )
+ sh returnStdout: false, script: """
+ cd voltha
+ git clone -b master ${cordRepoUrl}/cord-tester
+ mkdir -p $WORKSPACE/bin
+ bash <( curl -sfL https://raw.githubusercontent.com/boz/kail/master/godownloader.sh) -b "$WORKSPACE/bin"
+ cd $WORKSPACE
+ if [ "${params.branch}" != "master" ]; then
+ cd $WORKSPACE/kind-voltha
+ source releases/${params.branch}
+ VC_VERSION=1.1.8
+ else
+ VC_VERSION=\$(curl -sSL https://api.github.com/repos/opencord/voltctl/releases/latest | jq -r .tag_name | sed -e 's/^v//g')
+ fi
+
+ HOSTOS=\$(uname -s | tr "[:upper:]" "[:lower:"])
+ HOSTARCH=\$(uname -m | tr "[:upper:]" "[:lower:"])
+ if [ \$HOSTARCH == "x86_64" ]; then
+ HOSTARCH="amd64"
+ fi
+ curl -o $WORKSPACE/bin/voltctl -sSL https://github.com/opencord/voltctl/releases/download/v\${VC_VERSION}/voltctl-\${VC_VERSION}-\${HOSTOS}-\${HOSTARCH}
+ chmod 755 $WORKSPACE/bin/voltctl
+ voltctl version --clientonly
+
+ if [ "${params.branch}" == "master" ]; then
+ # Default kind-voltha config doesn't work on ONF demo pod for accessing kvstore.
+ # The issue is that the mgmt node is also one of the k8s nodes and so port forwarding doesn't work.
+ # We should change this. In the meantime here is a workaround.
+ set +e
+
+ # Remove noise from voltha-core logs
+ voltctl log level set WARN read-write-core#github.com/opencord/voltha-go/db/model
+ voltctl log level set WARN read-write-core#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+ # Remove noise from openolt logs
+ voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/db
+ voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/probe
+ voltctl log level set WARN adapter-open-olt#github.com/opencord/voltha-lib-go/v3/pkg/kafka
+ fi
+ """
+ }
+ }
+
+ stage('Functional Tests') {
+ environment {
+ ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ ROBOT_FILE="Voltha_PODTests.robot"
+ ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/FunctionalTests"
+ }
+ steps {
+ sh """
+ cd $WORKSPACE/voltha/kind-voltha/scripts
+ ./log-collector.sh > /dev/null &
+ ./log-combine.sh > /dev/null &
+
+ mkdir -p $ROBOT_LOGS_DIR
+ if [ "${params.testType}" == "Functional" ]; then
+ if ( ${powerSwitch} ); then
+ export ROBOT_MISC_ARGS="--removekeywords wuks -i PowerSwitch -i sanity -i functional -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE"
+ else
+ export ROBOT_MISC_ARGS="--removekeywords wuks -e PowerSwitch -i sanity -i functional -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE"
+ fi
+ make -C $WORKSPACE/voltha/voltha-system-tests voltha-test || true
+ fi
+ make -C $WORKSPACE/voltha/voltha-system-tests voltha-test || true
+ """
+ }
+ }
+
+ stage('Failure/Recovery Tests') {
+ environment {
+ ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ ROBOT_FILE="Voltha_FailureScenarios.robot"
+ ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/FailureScenarios"
+ }
+ steps {
+ sh """
+ mkdir -p $ROBOT_LOGS_DIR
+ if [ "${params.testType}" == "Failure" ]; then
+ if ( ${powerSwitch} ); then
+ export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functional -i PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE"
+ else
+ export ROBOT_MISC_ARGS="--removekeywords wuks -L TRACE -i functional -e PowerSwitch -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE"
+ fi
+ fi
+ make -C $WORKSPACE/voltha/voltha-system-tests voltha-test || true
+ """
+ }
+ }
+
+ stage('Dataplane Tests') {
+ environment {
+ ROBOT_CONFIG_FILE="$WORKSPACE/${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ ROBOT_FILE="Voltha_PODTests.robot"
+ ROBOT_LOGS_DIR="$WORKSPACE/RobotLogs/DataplaneTests"
+ }
+ steps {
+ sh """
+ mkdir -p $ROBOT_LOGS_DIR
+ if [ "${params.testType}" == "Failure" ]; then
+ export ROBOT_MISC_ARGS="--removekeywords wuks -i dataplane -e bbsim -e notready -d $ROBOT_LOGS_DIR -v POD_NAME:${configFileName} -v KUBERNETES_CONFIGS_DIR:$WORKSPACE/${configBaseDir}/${configKubernetesDir} -v container_log_dir:$WORKSPACE"
+ make -C $WORKSPACE/voltha/voltha-system-tests voltha-test || true
+ fi
+ """
+ }
+ }
+
+ }
+ post {
+ always {
+ sh returnStdout: false, script: '''
+ set +e
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\n'}" | sort | uniq
+ kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.imageID}{'\\n'}" | sort | uniq
+ kubectl get nodes -o wide
+ kubectl get pods -n voltha -o wide
+
+ sleep 60 # Wait for log-collector and log-combine to complete
+
+ # Clean up "announcer" pod used by the tests if present
+ kubectl delete pod announcer || true
+
+ ## Pull out errors from log files
+ extract_errors_go() {
+ echo
+ echo "Error summary for $1:"
+ grep '"level":"error"' $WORKSPACE/voltha/kind-voltha/scripts/logger/combined/$1*
+ echo
+ }
+
+ extract_errors_python() {
+ echo
+ echo "Error summary for $1:"
+ grep 'ERROR' $WORKSPACE/voltha/kind-voltha/scripts/logger/combined/$1*
+ echo
+ }
+
+ extract_errors_go voltha-rw-core > $WORKSPACE/error-report.log
+ extract_errors_go adapter-open-olt >> $WORKSPACE/error-report.log
+ extract_errors_python adapter-open-onu >> $WORKSPACE/error-report.log
+ extract_errors_python voltha-ofagent >> $WORKSPACE/error-report.log
+ extract_errors_python onos >> $WORKSPACE/error-report.log
+
+ cd $WORKSPACE/voltha/kind-voltha/scripts/logger/combined/
+ tar czf $WORKSPACE/container-logs.tgz *
+
+ cd $WORKSPACE
+ gzip *-combined.log || true
+
+ # collect ETCD cluster logs
+ mkdir -p $WORKSPACE/etcd
+ printf '%s\n' $(kubectl get pods -l app=etcd -o=jsonpath="{.items[*]['metadata.name']}") | xargs -I@ bash -c "kubectl logs @ > $WORKSPACE/etcd/@.log"
+ '''
+ script {
+ deployment_config.olts.each { olt ->
+ sh returnStdout: false, script: """
+ sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/openolt.log $WORKSPACE/openolt-${olt.sship}.log || true
+ sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt-${olt.sship}.log # Remove escape sequences
+ sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/dev_mgmt_daemon.log $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log || true
+ sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/dev_mgmt_daemon-${olt.sship}.log # Remove escape sequences
+ sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/startup.log $WORKSPACE/startup-${olt.sship}.log || true
+ sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/startup-${olt.sship}.log || true # Remove escape sequences
+ sshpass -p ${olt.pass} scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ${olt.user}@${olt.sship}:/var/log/openolt_process_watchdog.log $WORKSPACE/openolt_process_watchdog-${olt.sship}.log || true
+ sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt_process_watchdog-${olt.sship}.log || true # Remove escape sequences
+ """
+ }
+ }
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: '**/log*.html',
+ otherFiles: '',
+ outputFileName: '**/output*.xml',
+ outputPath: 'RobotLogs',
+ passThreshold: 100,
+ reportFileName: '**/report*.html',
+ unstableThreshold: 0
+ ]);
+ archiveArtifacts artifacts: '*.log,*.gz,*.tgz,etcd/*.log'
+ }
+ unstable {
+ step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false])
+ }
+ }
+}
diff --git a/jjb/voltha-test/voltha-nightly-jobs.yaml b/jjb/voltha-test/voltha-nightly-jobs.yaml
index a28f805..f007915 100644
--- a/jjb/voltha-test/voltha-nightly-jobs.yaml
+++ b/jjb/voltha-test/voltha-nightly-jobs.yaml
@@ -366,6 +366,11 @@
default: '{power-switch}'
description: "Indicate whether POD has power switch to reboot ONUs/OLT remotely"
+ - string:
+ name: testType
+ default: '{test-type}'
+ description: 'Passes the required test category to the groovy script'
+
concurrent: true
project-type: pipeline