diff --git a/jjb/device-management.yaml b/jjb/device-management.yaml
new file mode 100644
index 0000000..cd8b9f6
--- /dev/null
+++ b/jjb/device-management.yaml
@@ -0,0 +1,252 @@
+---
+# device-management tests
+
+- project:
+    name: device-management-e2e
+
+    project-name: '{name}'
+
+    jobs:
+      # Per-patchset Pod builds on Tucson pod
+      - 'verify_physical_device-management_patchset_manual':
+          name: 'verify_physical_device-management_patchset_manual'
+          testvm: 'tucson-pod'
+          config-pod: 'tucson-pod'
+          branch: 'master'
+          oltDebVersion: 'openolt_asfvolt16-2.3.0-bc6e0853e0e8bf6bd7e4223d4a7ee0dd35ce634d.deb'
+          profile: 'Default'
+          withPatchset: true
+
+- job-template:
+    id: 'device-management-patch-test'
+    name: 'verify_{project}_sanity-test{name-extension}'
+    extra-helm-flags: ''
+    skip-vote: false
+
+    description: |
+      <!-- Managed by Jenkins Job Builder -->
+      Created by {id} job-template from ci-management/jjb/device-management.yaml  <br /><br />
+      Validation for device-management using mock redfish servers
+
+    properties:
+      - cord-infra-properties:
+          build-days-to-keep: '{build-days-to-keep}'
+          artifact-num-to-keep: '{artifact-num-to-keep}'
+
+    wrappers:
+      - lf-infra-wrappers:
+          build-timeout: '{build-timeout}'
+          jenkins-ssh-credential: '{jenkins-ssh-credential}'
+
+    parameters:
+      - string:
+          name: buildNode
+          default: 'ubuntu16.04-basebuild-4c-8g'
+          description: 'Name of the Jenkins node to run the job on'
+
+      - string:
+          name: manifestUrl
+          default: '{gerrit-server-url}/{voltha-test-manifest-repo}'
+          description: 'URL to the repo manifest'
+
+      - string:
+          name: manifestBranch
+          default: 'master'
+          description: 'Name of the repo branch to use'
+
+      - string:
+          name: gerritProject
+          default: '$GERRIT_PROJECT'
+          description: 'Name of the Gerrit project'
+
+      - string:
+          name: gerritChangeNumber
+          default: '$GERRIT_CHANGE_NUMBER'
+          description: 'Changeset number in Gerrit'
+
+      - string:
+          name: gerritPatchsetNumber
+          default: '$GERRIT_PATCHSET_NUMBER'
+          description: 'PatchSet number in Gerrit'
+
+      - string:
+          name: extraHelmFlags
+          default: '{extra-helm-flags}'
+          description: 'Helm flags to pass to ./voltha up'
+
+    project-type: pipeline
+    concurrent: true
+
+    dsl: !include-raw-escape: pipeline/{pipeline-script}
+
+    triggers:
+      - gerrit:
+          server-name: '{gerrit-server-name}'
+          dependency-jobs: '{dependency-jobs}'
+          silent-start: true
+          trigger-on:
+            - patchset-created-event:
+                exclude-drafts: true
+                exclude-trivial-rebase: false
+                exclude-no-code-change: true
+            - draft-published-event
+            - comment-added-contains-event:
+                comment-contains-value: '(?i)^.*recheck$'
+          projects:
+            - project-compare-type: REG_EXP
+              project-pattern: '^device-management$'
+              branches:
+                - branch-compare-type: REG_EXP
+                  branch-pattern: '{branch-regexp}'
+              file-paths:
+                - compare-type: REG_EXP
+                  pattern: '{all-files-regexp}'
+          skip-vote:
+            successful: '{skip-vote}'
+            failed: '{skip-vote}'
+            unstable: '{skip-vote}'
+            notbuilt: '{skip-vote}'
+
+# POD Per Patchset Pipeline Jobs
+
+- job-template:
+    name: '{name}'
+    id: verify_physical_device-management_patchset_manual
+    description: |
+                  <!-- Managed by Jenkins Job Builder -->
+                  Automated build on POD {config-pod} using {pipeline-script} <br /><br />
+                  Created from job-template {id} from ci-management/jjb/device-management.yaml <br />
+                  Created by Andy Bavier, andy@opennetworking.org <br />
+                  Copyright (c) 2019 Open Networking Foundation (ONF)
+    sandbox: true
+    pipeline-script: 'device-management-physical-build-and-tests.groovy'
+
+    properties:
+      - cord-infra-properties:
+          build-days-to-keep: '{build-days-to-keep}'
+          artifact-num-to-keep: '{artifact-num-to-keep}'
+
+    parameters:
+      - string:
+          name: buildNode
+          default: '{testvm}'
+          description: 'Pod management node'
+
+      - string:
+          name: manifestUrl
+          default: '{gerrit-server-url}/{voltha-test-manifest-repo}'
+          description: 'URL to the repo manifest'
+
+      - string:
+          name: manifestBranch
+          default: master
+          description: 'Name of the repo branch to use'
+
+      - string:
+          name: gerritProject
+          default: '$GERRIT_PROJECT'
+          description: 'Name of the Gerrit project'
+
+      - string:
+          name: gerritChangeNumber
+          default: '$GERRIT_CHANGE_NUMBER'
+          description: 'Changeset number in Gerrit'
+
+      - string:
+          name: gerritPatchsetNumber
+          default: '$GERRIT_PATCHSET_NUMBER'
+          description: 'PatchSet number in Gerrit'
+
+      - string:
+          name: cordRepoUrl
+          default: '{gerrit-server-url}'
+          description: 'The URL of the CORD Project repository'
+
+      - string:
+          name: podName
+          default: '{config-pod}'
+
+      - string:
+          name: deploymentConfigFile
+          default: 'pod-configs/deployment-configs/{config-pod}.yaml'
+          description: 'Path of deployment config file'
+
+      - string:
+          name: kindVolthaValuesFile
+          default: 'pod-configs/kubernetes-configs/voltha/{config-pod}.yml'
+          description: 'Path of kind-voltha values override file'
+
+      - string:
+          name: sadisConfigFile
+          default: 'voltha/voltha-system-tests/tests/data/{config-pod}-sadis.json'
+          description: 'Path of SADIS config to load'
+
+      - string:
+          name: localConfigDir
+          default: null
+          description: 'If specified, config file paths are relative to this dir; otherwise $WORKSPACE'
+
+      - string:
+          name: configRepo
+          default: 'pod-configs'
+          description: 'A repository containing the config files, will be checked out if specified'
+
+      - string:
+          name: oltDebVersion
+          default: '{oltDebVersion}'
+          description: 'OLT Software version to install'
+
+      - string:
+          name: branch
+          default: '{branch}'
+
+      - string:
+          name: profile
+          default: '{profile}'
+          description: 'Technology Profile pushed to the ETCD'
+
+      - string:
+          name: notificationEmail
+          default: 'andy@opennetworking.org'
+          description: ''
+
+      - bool:
+          name: reinstallOlt
+          default: true
+          description: "Re-install OLT software"
+
+      - bool:
+          name: withPatchset
+          default: true
+          description: "Build with Gerrit patchset"
+
+      - string:
+          name: extraRobotArgs
+          default: '-i sanity'
+          description: 'Arguments to pass to robot'
+
+    project-type: pipeline
+    concurrent: true
+
+    dsl: !include-raw-escape: pipeline/{pipeline-script}
+
+    triggers:
+      - gerrit:
+          server-name: '{gerrit-server-name}'
+          dependency-jobs: '{dependency-jobs}'
+          silent-start: false
+          successful-message: "PASSED hardware test"
+          failure-message: "FAILED hardware test"
+          unstable-message: "UNSTABLE hardware test"
+          trigger-on:
+            - comment-added-contains-event:
+                comment-contains-value: '^hardware test$'
+            - comment-added-contains-event:
+                comment-contains-value: '^hardware test with delay$'
+          projects:
+            - project-compare-type: REG_EXP
+              project-pattern: '^device-management$'
+              branches:
+                - branch-compare-type: PLAIN
+                  branch-pattern: 'master'
+
diff --git a/jjb/pipeline/device-management-mock-tests.groovy b/jjb/pipeline/device-management-mock-tests.groovy
new file mode 100644
index 0000000..b3bd20d
--- /dev/null
+++ b/jjb/pipeline/device-management-mock-tests.groovy
@@ -0,0 +1,181 @@
+// Copyright 2017-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// voltha-2.x e2e tests
+// uses kind-voltha to deploy voltha-2.X
+// uses bbsim to simulate OLT/ONUs
+
+pipeline {
+
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+    timeout(time: 90, unit: 'MINUTES')
+  }
+  environment {
+    KUBECONFIG="$HOME/.kube/kind-config-voltha-minimal"
+    VOLTCONFIG="$HOME/.volt/config-minimal"
+    PATH="$WORKSPACE/kind-voltha/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+    TYPE="minimal"
+    FANCY=0
+    WITH_SIM_ADAPTERS="n"
+    WITH_RADIUS="y"
+    WITH_BBSIM="y"
+    DEPLOY_K8S="y"
+    VOLTHA_LOG_LEVEL="DEBUG"
+    CONFIG_SADIS="n"
+    ROBOT_MISC_ARGS="-d $WORKSPACE/RobotLogs"
+  }
+
+  stages {
+
+    stage('Repo') {
+      steps {
+        step([$class: 'WsCleanup'])
+        checkout(changelog: false, \
+          poll: false,
+          scm: [$class: 'RepoScm', \
+            manifestRepositoryUrl: "${params.manifestUrl}", \
+            manifestBranch: "${params.manifestBranch}", \
+            currentBranch: true, \
+            destinationDir: 'voltha', \
+            forceSync: true,
+            resetFirst: true, \
+            quiet: true, \
+            jobs: 4, \
+            showAllChanges: true] \
+          )
+      }
+    }
+    stage('Patch') {
+      steps {
+        sh """
+           pushd voltha
+           repo download "${gerritProject}" "${gerritChangeNumber}/${gerritPatchsetNumber}"
+           popd
+           """
+      }
+    }
+    stage('Create K8s Cluster') {
+      steps {
+        sh """
+           git clone https://github.com/ciena/kind-voltha.git
+           cd kind-voltha/
+           JUST_K8S=y ./voltha up
+           bash <( curl -sfL https://raw.githubusercontent.com/boz/kail/master/godownloader.sh) -b "$WORKSPACE/kind-voltha/bin"
+           """
+      }
+    }
+
+    stage('Build Images') {
+      steps {
+        sh """
+           make-local () {
+             make -C $WORKSPACE/voltha/\$1 DOCKER_REPOSITORY=voltha/ DOCKER_TAG=citest docker-build
+           }
+           """
+      }
+    }
+
+    stage('Push Images') {
+      steps {
+        sh '''
+             export GOROOT=/usr/local/go
+             export GOPATH=\$(pwd)
+             docker images | grep citest
+             for image in \$(docker images -f "reference=*/*citest" --format "{{.Repository}}"); do echo "Pushing \$image to nodes"; kind load docker-image \$image:citest --name voltha-\$TYPE --nodes voltha-\$TYPE-worker,voltha-\$TYPE-worker2; done
+           '''
+      }
+    }
+    stage('Deploy Voltha') {
+      steps {
+        sh '''
+           export EXTRA_HELM_FLAGS="--set log_agent.enabled=False ${extraHelmFlags} "
+
+           cd $WORKSPACE/kind-voltha/
+           echo \$EXTRA_HELM_FLAGS
+           kail -n voltha -n default > $WORKSPACE/onos-voltha-combined.log &
+           ./voltha up
+           '''
+      }
+    }
+
+    stage('Run E2E Tests') {
+      steps {
+        sh '''
+           mkdir -p $WORKSPACE/RobotLogs
+
+           # tell the kubernetes script to use images tagged citest and pullPolicy:Never
+           sed -i 's/master/citest/g' $WORKSPACE/voltha/device-management/kubernetes/deploy-redfish-importer.yaml
+           sed -i 's/imagePullPolicy: Always/imagePullPolicy: Never/g' $WORKSPACE/voltha/device-management/kubernetes/deploy-redfish-importer.yaml
+           make -C $WORKSPACE/voltha/device-management functional-mock-test || true
+           '''
+      }
+    }
+  }
+
+  post {
+    always {
+      sh '''
+         set +e
+         cp $WORKSPACE/kind-voltha/install-minimal.log $WORKSPACE/
+         kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\t'}{.imageID}{'\\n'}" | sort | uniq -c
+         kubectl get nodes -o wide
+         kubectl get pods -o wide
+         kubectl get pods -n voltha -o wide
+
+         sync
+         pkill kail || true
+
+         ## Pull out errors from log files
+         extract_errors_go() {
+           echo
+           echo "Error summary for $1:"
+           grep $1 $WORKSPACE/onos-voltha-combined.log | grep '"level":"error"' | cut -d ' ' -f 2- | jq -r '.msg'
+           echo
+         }
+
+         extract_errors_python() {
+           echo
+           echo "Error summary for $1:"
+           grep $1 $WORKSPACE/onos-voltha-combined.log | grep 'ERROR' | cut -d ' ' -f 2-
+           echo
+         }
+
+         extract_errors_go voltha-rw-core > $WORKSPACE/error-report.log
+         extract_errors_go adapter-open-olt >> $WORKSPACE/error-report.log
+         extract_errors_python adapter-open-onu >> $WORKSPACE/error-report.log
+         extract_errors_python voltha-ofagent >> $WORKSPACE/error-report.log
+
+         gzip $WORKSPACE/onos-voltha-combined.log
+
+         ## shut down kind-voltha
+         cd $WORKSPACE/kind-voltha
+	       WAIT_ON_DOWN=y ./voltha down
+         '''
+         step([$class: 'RobotPublisher',
+            disableArchiveOutput: false,
+            logFileName: 'RobotLogs/log*.html',
+            otherFiles: '',
+            outputFileName: 'RobotLogs/output*.xml',
+            outputPath: '.',
+            passThreshold: 80,
+            reportFileName: 'RobotLogs/report*.html',
+            unstableThreshold: 0]);
+         archiveArtifacts artifacts: '*.log,*.gz'
+    }
+  }
+}
diff --git a/jjb/pipeline/device-management-physical-build-and-tests.groovy b/jjb/pipeline/device-management-physical-build-and-tests.groovy
new file mode 100644
index 0000000..1a50e9e
--- /dev/null
+++ b/jjb/pipeline/device-management-physical-build-and-tests.groovy
@@ -0,0 +1,345 @@
+// Copyright 2019-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// deploy VOLTHA built from patchset on a physical pod and run e2e test
+// uses kind-voltha to deploy voltha-2.X
+
+// Need this so that deployment_config has global scope when it's read later
+deployment_config = null
+localDeploymentConfigFile = null
+localKindVolthaValuesFile = null
+localSadisConfigFile = null
+
+// The pipeline assumes these variables are always defined
+if ( ! params.withPatchset ) {
+  GERRIT_EVENT_COMMENT_TEXT = ""
+  GERRIT_PROJECT = ""
+  GERRIT_CHANGE_NUMBER = ""
+  GERRIT_PATCHSET_NUMBER = ""
+}
+
+pipeline {
+
+  /* no label, executor is determined by JJB */
+  agent {
+    label "${params.buildNode}"
+  }
+  options {
+      timeout(time: 90, unit: 'MINUTES')
+  }
+
+  environment {
+    KUBECONFIG="$HOME/.kube/kind-config-voltha-minimal"
+    VOLTCONFIG="$HOME/.volt/config-minimal"
+    PATH="$WORKSPACE/kind-voltha/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+    TYPE="minimal"
+    FANCY=0
+    //VOL-2194 ONOS SSH and REST ports hardcoded to 30115/30120 in tests
+    ONOS_SSH_PORT=30115
+    ONOS_API_PORT=30120
+  }
+
+  stages {
+    stage ('Initialize') {
+      steps {
+        sh returnStdout: false, script: """
+        test -e $WORKSPACE/kind-voltha/voltha && cd $WORKSPACE/kind-voltha && ./voltha down
+        cd $WORKSPACE
+        rm -rf $WORKSPACE/*
+        """
+        script {
+          if (env.configRepo && ! env.localConfigDir) {
+            env.localConfigDir = "$WORKSPACE"
+            sh returnStdout: false, script: "git clone -b master ${cordRepoUrl}/${configRepo}"
+          }
+          localDeploymentConfigFile = "${env.localConfigDir}/${params.deploymentConfigFile}"
+          localKindVolthaValuesFile = "${env.localConfigDir}/${params.kindVolthaValuesFile}"
+          localSadisConfigFile = "${env.localConfigDir}/${params.sadisConfigFile}"
+        }
+      }
+    }
+
+    stage('Repo') {
+      steps {
+        checkout(changelog: true,
+          poll: false,
+          scm: [$class: 'RepoScm',
+            manifestRepositoryUrl: "${params.manifestUrl}",
+            manifestBranch: "${params.manifestBranch}",
+            currentBranch: true,
+            destinationDir: 'voltha',
+            forceSync: true,
+            resetFirst: true,
+            quiet: true,
+            jobs: 4,
+            showAllChanges: true]
+          )
+      }
+    }
+
+    stage('Get Patch') {
+      when {
+        expression { params.withPatchset }
+      }
+      steps {
+        sh returnStdout: false, script: """
+        cd voltha
+        repo download "${gerritProject}" "${gerritChangeNumber}/${gerritPatchsetNumber}"
+        """
+      }
+    }
+
+    stage('Check config files') {
+      steps {
+        script {
+          try {
+            deployment_config = readYaml file: "${localDeploymentConfigFile}"
+          } catch (err) {
+            echo "Error reading ${localDeploymentConfigFile}"
+            throw err
+          }
+          sh returnStdout: false, script: """
+          if [ ! -e ${localKindVolthaValuesFile} ]; then echo "${localKindVolthaValuesFile} not found"; exit 1; fi
+          if [ ! -e ${localSadisConfigFile} ]; then echo "${localSadisConfigFile} not found"; exit 1; fi
+          """
+        }
+      }
+    }
+
+    stage('Create KinD Cluster') {
+      steps {
+        sh returnStdout: false, script: """
+        git clone https://github.com/ciena/kind-voltha.git
+        cd kind-voltha/
+        JUST_K8S=y ./voltha up
+        """
+      }
+    }
+
+    stage('Build and Push Images') {
+      when {
+        expression { params.withPatchset }
+      }
+      steps {
+        sh returnStdout: false, script: """
+        make -C $WORKSPACE/voltha/\$1 DOCKER_REPOSITORY=voltha/ DOCKER_TAG=citest docker-build
+        docker images | grep citest
+        for image in \$(docker images -f "reference=*/*citest" --format "{{.Repository}}"); do echo "Pushing \$image to nodes"; kind load docker-image \$image:citest --name voltha-\$TYPE --nodes voltha-\$TYPE-worker,voltha-\$TYPE-worker2; done
+        """
+      }
+    }
+
+    stage('Deploy Voltha') {
+      environment {
+        WITH_SIM_ADAPTERS="n"
+        WITH_RADIUS="y"
+        DEPLOY_K8S="n"
+        VOLTHA_LOG_LEVEL="debug"
+      }
+      steps {
+        script {
+          sh returnStdout: false, script: """
+          export EXTRA_HELM_FLAGS='--set log_agent.enabled=False -f ${localKindVolthaValuesFile} '
+
+          cd $WORKSPACE/kind-voltha/
+          echo \$EXTRA_HELM_FLAGS
+          kail -n voltha -n default > $WORKSPACE/onos-voltha-combined.log &
+          ./voltha up
+          """
+        }
+      }
+    }
+
+    stage('Deploy Kafka Dump Chart') {
+      steps {
+        script {
+          sh returnStdout: false, script: """
+              helm repo add cord https://charts.opencord.org
+              helm repo update
+              helm install -n voltha-kafka-dump cord/voltha-kafka-dump
+          """
+        }
+      }
+    }
+
+    stage('Push Tech-Profile') {
+      when {
+        expression { params.profile != "Default" }
+      }
+      steps {
+        sh returnStdout: false, script: """
+        etcd_container=\$(kubectl get pods -n voltha | grep voltha-etcd-cluster | awk 'NR==1{print \$1}')
+        kubectl cp $WORKSPACE/voltha/voltha-system-tests/tests/data/TechProfile-${profile}.json voltha/\$etcd_container:/tmp/flexpod.json
+        kubectl exec -it \$etcd_container -n voltha -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/XGS-PON/64'
+        """
+      }
+    }
+
+    stage('Push Sadis-config') {
+      steps {
+        sh returnStdout: false, script: """
+        curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:$ONOS_API_PORT/onos/v1/network/configuration --data @${localSadisConfigFile}
+        """
+      }
+    }
+
+    stage('Reinstall OLT software') {
+      when {
+        expression { params.reinstallOlt }
+      }
+      steps {
+        script {
+          deployment_config.olts.each { olt ->
+            sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'service openolt stop' || true"
+            sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'killall dev_mgmt_daemon' || true"
+            sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'"
+            waitUntil {
+              olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
+              return olt_sw_present.toInteger() == 0
+            }
+            sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --install ${oltDebVersion}'"
+            waitUntil {
+              olt_sw_present = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'dpkg --list | grep asfvolt16 | wc -l'"
+              return olt_sw_present.toInteger() == 1
+            }
+            if ( olt.fortygig ) {
+              // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
+              sh returnStdout: false, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'echo port ce128 sp=40000 >> /broadcom/qax.soc ; /opt/bcm68620/svk_init.sh'"
+            }
+          }
+        }
+      }
+    }
+
+    stage('Restart OLT processes') {
+      steps {
+        script {
+          deployment_config.olts.each { olt ->
+            sh returnStdout: false, script: """
+            ssh-keyscan -H ${olt.ip} >> ~/.ssh/known_hosts
+            sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'service openolt stop' || true
+            sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'killall dev_mgmt_daemon' || true
+            sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'rm -f /var/log/openolt.log'
+            sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'rm -f /var/log/dev_mgmt_daemon.log'
+            sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'service dev_mgmt_daemon start &'
+            sleep 5
+            sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'service openolt start &'
+            """
+            waitUntil {
+              onu_discovered = sh returnStdout: true, script: "sshpass -p ${olt.pass} ssh -l ${olt.user} ${olt.ip} 'grep \"onu discover indication\" /var/log/openolt.log | wc -l'"
+              return onu_discovered.toInteger() > 0
+            }
+          }
+        }
+      }
+    }
+
+    stage('Run E2E Tests') {
+      environment {
+        ROBOT_CONFIG_FILE="${localDeploymentConfigFile}"
+        ROBOT_MISC_ARGS="${params.extraRobotArgs} --removekeywords wuks -d $WORKSPACE/RobotLogs -v container_log_dir:$WORKSPACE "
+        ROBOT_FILE="Voltha_PODTests.robot"
+      }
+      steps {
+        sh returnStdout: false, script: """
+        cd voltha
+        git clone -b ${branch} ${cordRepoUrl}/cord-tester
+        mkdir -p $WORKSPACE/RobotLogs
+
+        # tell the kubernetes script to use images tagged citest and pullPolicy:Never
+        sed -i 's/master/citest/g' $WORKSPACE/voltha/device-management/kubernetes/deploy-redfish-importer.yaml
+        sed -i 's/imagePullPolicy: Always/imagePullPolicy: Never/g' $WORKSPACE/voltha/device-management/kubernetes/deploy-redfish-importer.yaml
+        make -C $WORKSPACE/voltha/device-management functional-mock-test || true
+        """
+      }
+    }
+
+    stage('After-Test Delay') {
+      when {
+        expression { params.withPatchset }
+      }
+      steps {
+        sh returnStdout: false, script: """
+        # Note: Gerrit comment text will be prefixed by "Patch set n:" and a blank line
+        REGEX="hardware test with delay\$"
+        [[ "$GERRIT_EVENT_COMMENT_TEXT" =~ \$REGEX ]] && sleep 10m || true
+        """
+      }
+    }
+  }
+
+  post {
+    always {
+      sh returnStdout: false, script: '''
+      set +e
+      cp kind-voltha/install-minimal.log $WORKSPACE/
+      kubectl get pods --all-namespaces -o jsonpath="{range .items[*].status.containerStatuses[*]}{.image}{'\\t'}{.imageID}{'\\n'}" | sort | uniq -c
+      kubectl get nodes -o wide
+      kubectl get pods -o wide
+      kubectl get pods -n voltha -o wide
+
+      sync
+      pkill kail || true
+
+      ## Pull out errors from log files
+      extract_errors_go() {
+        echo
+        echo "Error summary for $1:"
+        grep $1 $WORKSPACE/onos-voltha-combined.log | grep '"level":"error"' | cut -d ' ' -f 2- | jq -r '.msg'
+        echo
+      }
+
+      extract_errors_python() {
+        echo
+        echo "Error summary for $1:"
+        grep $1 $WORKSPACE/onos-voltha-combined.log | grep 'ERROR' | cut -d ' ' -f 2-
+        echo
+      }
+
+      extract_errors_go voltha-rw-core > $WORKSPACE/error-report.log
+      extract_errors_go adapter-open-olt >> $WORKSPACE/error-report.log
+      extract_errors_python adapter-open-onu >> $WORKSPACE/error-report.log
+      extract_errors_python voltha-ofagent >> $WORKSPACE/error-report.log
+
+      gzip $WORKSPACE/onos-voltha-combined.log
+
+      ## collect events, the chart should be running by now
+      kubectl get pods | grep -i voltha-kafka-dump | grep -i running
+      if [[ $? == 0 ]]; then
+         kubectl exec -it `kubectl get pods | grep -i voltha-kafka-dump | grep -i running | cut -f1 -d " "` ./voltha-dump-events.sh > $WORKSPACE/voltha-events.log
+      fi
+      '''
+      script {
+        deployment_config.olts.each { olt ->
+          sh returnStdout: false, script: """
+          sshpass -p ${olt.pass} scp ${olt.user}@${olt.ip}:/var/log/openolt.log $WORKSPACE/openolt-${olt.ip}.log || true
+          sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/openolt-${olt.ip}.log  # Remove escape sequences
+          sshpass -p ${olt.pass} scp ${olt.user}@${olt.ip}:/var/log/dev_mgmt_daemon.log $WORKSPACE/dev_mgmt_daemon-${olt.ip}.log || true
+          sed -i 's/\\x1b\\[[0-9;]*[a-zA-Z]//g' $WORKSPACE/dev_mgmt_daemon-${olt.ip}.log  # Remove escape sequences
+          """
+        }
+      }
+      step([$class: 'RobotPublisher',
+        disableArchiveOutput: false,
+        logFileName: 'RobotLogs/log*.html',
+        otherFiles: '',
+        outputFileName: 'RobotLogs/output*.xml',
+        outputPath: '.',
+        passThreshold: 100,
+        reportFileName: 'RobotLogs/report*.html',
+        unstableThreshold: 0]);
+      archiveArtifacts artifacts: '*.log,*.gz'
+    }
+  }
+}
diff --git a/jjb/verify/device-management.yaml b/jjb/verify/device-management.yaml
index 193c78c..10cfec2 100644
--- a/jjb/verify/device-management.yaml
+++ b/jjb/verify/device-management.yaml
@@ -19,6 +19,8 @@
           dependency-jobs: 'verify_device-management_licensed'
       - 'make-unit-test':
           junit-allow-empty-results: true
+      - 'device-management-patch-test':
+          pipeline-script: 'device-management-mock-tests.groovy'
 
 - job-group:
     name: 'publish-device-management-jobs'