blob: 4db22f92da6585975c38071d5f111ad46d51a485 [file] [log] [blame]
Matteo Scandolod82d1de2021-04-06 14:55:58 -07001// Copyright 2017-present Open Networking Foundation
2//
3// Licensed under the Apache License, Version 2.0 (the "License");
4// you may not use this file except in compliance with the License.
5// You may obtain a copy of the License at
6//
7// http://www.apache.org/licenses/LICENSE-2.0
8//
9// Unless required by applicable law or agreed to in writing, software
10// distributed under the License is distributed on an "AS IS" BASIS,
11// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12// See the License for the specific language governing permissions and
13// limitations under the License.
14
15// used to deploy VOLTHA and configure ONOS physical PODs
16
17// NOTE we are importing the library even if it's global so that it's
18// easier to change the keywords during a replay
19library identifier: 'cord-jenkins-libraries@master',
20 retriever: modernSCM([
21 $class: 'GitSCMSource',
22 remote: 'https://gerrit.opencord.org/ci-management.git'
23])
24
25def infraNamespace = "infra"
26def volthaNamespace = "voltha"
27
28pipeline {
29
30 /* no label, executor is determined by JJB */
31 agent {
32 label "${params.buildNode}"
33 }
34 options {
35 timeout(time: 35, unit: 'MINUTES')
36 }
37 environment {
38 PATH="$PATH:$WORKSPACE/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin"
Matteo Scandolod43bb302021-04-20 10:19:29 -070039 KUBECONFIG="$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf"
Matteo Scandolod82d1de2021-04-06 14:55:58 -070040 }
41
42 stages{
43 stage('Download Code') {
Matteo Scandolod43bb302021-04-20 10:19:29 -070044 steps {
45 getVolthaCode([
46 branch: "${branch}",
Hardik Windlass791917b2021-05-28 04:55:37 +000047 volthaSystemTestsChange: "${volthaSystemTestsChange}",
Matteo Scandolod43bb302021-04-20 10:19:29 -070048 volthaHelmChartsChange: "${volthaHelmChartsChange}",
49 ])
50 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -070051 }
52 stage ("Parse deployment configuration file") {
Matteo Scandolod43bb302021-04-20 10:19:29 -070053 steps {
54 sh returnStdout: true, script: "rm -rf ${configBaseDir}"
55 sh returnStdout: true, script: "git clone -b master ${cordRepoUrl}/${configBaseDir}"
56 script {
57 if ( params.workFlow == "DT" ) {
58 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-DT.yaml"
59 }
60 else if ( params.workFlow == "TT" )
61 {
62 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}-TT.yaml"
63 }
64 else
65 {
66 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
67 }
68 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -070069 }
70 }
71 stage('Clean up') {
Matteo Scandolod43bb302021-04-20 10:19:29 -070072 steps {
73 timeout(15) {
74 script {
75 helmTeardown(["default", infraNamespace, volthaNamespace])
76 }
77 timeout(1) {
78 sh returnStdout: false, script: '''
Matteo Scandolo16bb6fe2021-04-26 13:15:39 -070079 # remove orphaned port-forward from different namespaces
Andrea Campanella4c8af942021-05-12 10:12:13 +020080 ps aux | grep port-forw | grep -v grep | awk '{print $2}' | xargs --no-run-if-empty kill -9 || true
Matteo Scandolod43bb302021-04-20 10:19:29 -070081 '''
82 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -070083 }
84 }
85 }
86 stage('Install Voltha') {
Matteo Scandolod43bb302021-04-20 10:19:29 -070087 steps {
88 timeout(20) {
89 script {
90 // if we're downloading a voltha-helm-charts patch, then install from a local copy of the charts
91 def localCharts = false
92 if (volthaHelmChartsChange != "") {
93 localCharts = true
94 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -070095
Matteo Scandolo16bb6fe2021-04-26 13:15:39 -070096 // should the config file be suffixed with the workflow? see "deployment_config"
Matteo Scandolod47bfb22021-05-24 09:40:05 -070097 def localHelmFlags = "-f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/voltha/${configFileName}.yml --set global.log_level=${logLevel} "
Matteo Scandolod82d1de2021-04-06 14:55:58 -070098
Matteo Scandolo16bb6fe2021-04-26 13:15:39 -070099 if (workFlow.toLowerCase() == "dt") {
Matteo Scandolod47bfb22021-05-24 09:40:05 -0700100 localHelmFlags += " --set radius.enabled=false "
Matteo Scandolo16bb6fe2021-04-26 13:15:39 -0700101 }
102 if (workFlow.toLowerCase() == "tt") {
Matteo Scandolod47bfb22021-05-24 09:40:05 -0700103 localHelmFlags += " --set radius.enabled=false --set global.incremental_evto_update=true "
Matteo Scandolo16bb6fe2021-04-26 13:15:39 -0700104 }
105
Matteo Scandolod43bb302021-04-20 10:19:29 -0700106 // NOTE temporary workaround expose ONOS node ports (pod-config needs to be updated to contain these values)
Andrea Campanella07ec1e22021-06-04 16:18:41 +0200107 // and to connect the ofagent to all instances of ONOS
Matteo Scandolod47bfb22021-05-24 09:40:05 -0700108 localHelmFlags = localHelmFlags + " --set onos-classic.onosSshPort=30115 " +
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700109 "--set onos-classic.onosApiPort=30120 " +
110 "--set onos-classic.onosOfPort=31653 " +
Andrea Campanella07ec1e22021-06-04 16:18:41 +0200111 "--set onos-classic.individualOpenFlowNodePorts=true " +
112 "--set voltha.onos_classic.replicas=${params.NumOfOnos}"
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700113
Hardik Windlass908533a2021-05-24 16:35:58 +0000114 if (bbsimReplicas.toInteger() != 0) {
Matteo Scandolod47bfb22021-05-24 09:40:05 -0700115 localHelmFlags = localHelmFlags + " --set onu=${onuNumber},pon=${ponNumber} "
Hardik Windlassc7379022021-05-12 13:52:24 +0530116 }
117
Matteo Scandolod47bfb22021-05-24 09:40:05 -0700118 // adding user specified helm flags at the end so they'll have priority over everything else
Andrea Campanellad4ab9502021-05-25 10:53:58 +0200119 localHelmFlags = localHelmFlags + " ${extraHelmFlags}"
Matteo Scandolod47bfb22021-05-24 09:40:05 -0700120
Matteo Scandolod43bb302021-04-20 10:19:29 -0700121 volthaDeploy([
122 workflow: workFlow.toLowerCase(),
Matteo Scandolod47bfb22021-05-24 09:40:05 -0700123 extraHelmFlags: localHelmFlags,
Matteo Scandolod43bb302021-04-20 10:19:29 -0700124 localCharts: localCharts,
125 kubeconfig: "$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf",
126 onosReplica: params.NumOfOnos,
127 atomixReplica: params.NumOfAtomix,
Hardik Windlassc7379022021-05-12 13:52:24 +0530128 kafkaReplica: params.NumOfKafka,
Hardik Windlass1685e5b2021-05-13 14:07:44 +0530129 etcdReplica: params.NumOfEtcd,
Hardik Windlass908533a2021-05-24 16:35:58 +0000130 bbsimReplica: bbsimReplicas.toInteger(),
Matteo Scandolod43bb302021-04-20 10:19:29 -0700131 ])
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700132 }
133 sh """
Matteo Scandolo79f133f2021-04-27 13:53:21 -0700134 JENKINS_NODE_COOKIE="dontKillMe" _TAG="voltha-api" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${volthaNamespace} svc/voltha-voltha-api 55555:55555; done"&
135 JENKINS_NODE_COOKIE="dontKillMe" _TAG="etcd" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-etcd ${params.VolthaEtcdPort}:2379; done"&
136 JENKINS_NODE_COOKIE="dontKillMe" _TAG="kafka" bash -c "while true; do kubectl port-forward --address 0.0.0.0 -n ${infraNamespace} svc/voltha-infra-kafka 9092:9092; done"&
Matteo Scandolod43bb302021-04-20 10:19:29 -0700137 ps aux | grep port-forward
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700138 """
Matteo Scandolod43bb302021-04-20 10:19:29 -0700139 getPodsInfo("$WORKSPACE")
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700140 }
Matteo Scandolod43bb302021-04-20 10:19:29 -0700141 }
142 }
143 stage('Push Tech-Profile') {
144 steps {
145 script {
146 if ( params.configurePod && params.profile != "Default" ) {
147 for(int i=0; i < deployment_config.olts.size(); i++) {
148 def tech_prof_directory = "XGS-PON"
149 // If no debian package is specified we default to GPON for the ADTRAN OLT.
150 if (!deployment_config.olts[i].containsKey("oltDebVersion") || deployment_config.olts[i].oltDebVersion.contains("asgvolt64")){
151 tech_prof_directory = "GPON"
152 }
153 timeout(1) {
154 sh returnStatus: true, script: """
155 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
156 etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
157 if [[ "${workFlow}" == "TT" ]]; then
158 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-HSIA.json \$etcd_container:/tmp/hsia.json
159 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/hsia.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
160 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-VoIP.json \$etcd_container:/tmp/voip.json
161 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/voip.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/65'
Hardik Windlassfc2cdcb2021-05-18 08:38:06 +0000162 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-None.json \$etcd_container:/tmp/mcast_additionalBW_none.json
163 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_none.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/66'
164 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-TT-MCAST-AdditionalBW-NA.json \$etcd_container:/tmp/mcast_additionalBW_na.json
165 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/mcast_additionalBW_na.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/67'
Matteo Scandolod43bb302021-04-20 10:19:29 -0700166 else
167 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/TechProfile-${profile}.json \$etcd_container:/tmp/flexpod.json
168 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/flexpod.json | ETCDCTL_API=3 etcdctl put service/voltha/technology_profiles/${tech_prof_directory}/64'
169 fi
170 """
171 }
172 timeout(1) {
173 sh returnStatus: true, script: """
174 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
175 etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
176 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'ETCDCTL_API=3 etcdctl get --prefix service/voltha/technology_profiles/${tech_prof_directory}/64'
177 """
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700178 }
179 }
180 }
181 }
182 }
183 }
Matteo Scandolod43bb302021-04-20 10:19:29 -0700184 stage('Push MIB templates') {
185 steps {
186 sh """
187 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
188 etcd_container=\$(kubectl get pods -n ${infraNamespace} | grep etcd | awk 'NR==1{print \$1}')
189 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Alpha.json \$etcd_container:/tmp/MIB_Alpha.json
190 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
191 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Alpha.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/BRCM/BVM4K00BRA0915-0083/5023_020O02414'
192 kubectl cp -n ${infraNamespace} $WORKSPACE/voltha-system-tests/tests/data/MIB_Scom.json \$etcd_container:/tmp/MIB_Scom.json
193 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/go_templates/SCOM/Glasfaser-Modem/090140.1.0.304'
194 kubectl exec -n ${infraNamespace} -it \$etcd_container -- /bin/sh -c 'cat /tmp/MIB_Scom.json | ETCDCTL_API=3 etcdctl put service/voltha/omci_mibs/templates/SCOM/Glasfaser-Modem/090140.1.0.304'
195 """
196 }
197 }
198 stage('Push Sadis-config') {
199 steps {
200 timeout(1) {
201 sh returnStatus: true, script: """
202 if [[ "${workFlow}" == "DT" ]]; then
203 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-DT.json
204 elif [[ "${workFlow}" == "TT" ]]; then
205 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis-TT.json
206 else
207 # this is the ATT case, rename the file in *-sadis-ATT.json so that we can avoid special cases and just load the file
208 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @$WORKSPACE/voltha-system-tests/tests/data/${configFileName}-sadis.json
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700209 fi
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700210 """
Matteo Scandolod43bb302021-04-20 10:19:29 -0700211 }
212 }
213 }
214 stage('Switch Configurations in ONOS') {
215 steps {
216 script {
217 if ( deployment_config.fabric_switches.size() > 0 ) {
218 timeout(1) {
219 def netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch.json"
220 if (params.inBandManagement){
221 netcfg = "$WORKSPACE/${configBaseDir}/${configToscaDir}/voltha/${configFileName}-onos-netcfg-switch-inband.json"
222 }
223 sh """
224 curl -sSL --user karaf:karaf -X POST -H Content-Type:application/json http://${deployment_config.nodes[0].ip}:30120/onos/v1/network/configuration --data @${netcfg}
225 curl -sSL --user karaf:karaf -X POST http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting/active
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700226 """
Matteo Scandolod43bb302021-04-20 10:19:29 -0700227 }
228 timeout(1) {
229 waitUntil {
230 sr_active_out = sh returnStatus: true, script: """
231 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.dhcpl2relay"
232 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.aaa"
233 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set TRACE org.opencord.olt"
234 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.FlowObjectiveManager"
235 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "log:set DEBUG org.onosproject.net.flowobjective.impl.InOrderFlowObjectiveManager"
236 curl -sSL --user karaf:karaf -X GET http://${deployment_config.nodes[0].ip}:30120/onos/v1/applications/org.onosproject.segmentrouting | jq '.state' | grep ACTIVE
237 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.provider.lldp.impl.LldpLinkProvider enabled false"
238 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.flow.impl.FlowRuleManager purgeOnDisconnection false"
239 sshpass -p karaf ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 30115 karaf@${deployment_config.nodes[0].ip} "cfg set org.onosproject.net.meter.impl.MeterManager purgeOnDisconnection false"
240 """
241 return sr_active_out == 0
242 }
243 }
244 timeout(5) {
245 for(int i=0; i < deployment_config.hosts.src.size(); i++) {
246 for(int j=0; j < deployment_config.olts.size(); j++) {
247 def aggPort = -1
248 if(deployment_config.olts[j].serial == deployment_config.hosts.src[i].olt){
249 aggPort = deployment_config.olts[j].aggPort
250 if(aggPort == -1){
251 throw new Exception("Upstream port for the olt is not configured, field aggPort is empty")
252 }
253 sh """
254 sleep 30 # NOTE why are we sleeping?
255 curl -X POST --user karaf:karaf --header 'Content-Type: application/json' --header 'Accept: application/json' -d '{"deviceId": "${deployment_config.fabric_switches[0].device_id}", "vlanId": "${deployment_config.hosts.src[i].s_tag}", "endpoints": [${deployment_config.fabric_switches[0].bngPort},${aggPort}]}' 'http://${deployment_config.nodes[0].ip}:30120/onos/segmentrouting/xconnect'
256 """
257 }
258 }
259 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700260 }
261 }
262 }
263 }
Matteo Scandolod43bb302021-04-20 10:19:29 -0700264 }
265 stage('Reinstall OLT software') {
266 steps {
267 script {
268 if ( params.reinstallOlt ) {
269 for(int i=0; i < deployment_config.olts.size(); i++) {
270 // NOTE what is oltDebVersion23? is that for VOLTHA-2.3? do we still need this differentiation?
271 sh returnStdout: true, script: """
272 if [[ "${branch}" != "master" ]] && [[ "${params.inBandManagement}" == "true" ]]; then
273 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
274 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
275 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion23}"
276 fi
277 if [[ "${branch}" != "master" ]] && [[ "${params.inBandManagement}" == "false" ]]; then
278 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
279 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion23}"
280 fi
281 if [[ "${branch}" == "master" ]] && [[ "${params.inBandManagement}" == "true" ]]; then
282 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
283 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'kill -9 `pgrep -f "[b]ash /opt/openolt/openolt_dev_mgmt_daemon_process_watchdog"` || true'
284 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
285 fi
286 if [[ "${branch}" == "master" ]] && [[ "${params.inBandManagement}" == "false" ]]; then
287 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
288 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} "dpkg --install ${deployment_config.olts[i].oltDebVersion}"
289 fi
290 sleep 10
291 """
292 timeout(5) {
293 waitUntil {
294 olt_sw_present = sh returnStdout: true, script: """
295 if [ "${deployment_config.olts[i].oltDebVersion}" == *"asfvolt16"* ]; then
296 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asfvolt16 | wc -l'
297 else
298 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'dpkg --list | grep asgvolt64 | wc -l'
299 fi
300 if (${deployment_config.olts[i].fortygig}); then
301 if [[ "${params.inBandManagement}" == "true" ]]; then
302 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
303 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'mkdir -p /opt/openolt/'
304 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/watchdog-script/* /opt/openolt/'
305 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp /root/bal_cli_appl/example_user_appl /broadcom'
306 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'cp in-band-startup-script/* /etc/init.d/'
307 fi
308 fi
309 """
310 return olt_sw_present.toInteger() > 0
311 }
312 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700313 }
314 }
Matteo Scandolod43bb302021-04-20 10:19:29 -0700315 }
316 }
317 }
318 stage('Restart OLT processes') {
319 steps {
320 script {
321 for(int i=0; i < deployment_config.olts.size(); i++) {
322 int waitTimerForOltUp = 360
323 if ( params.inBandManagement ) {
324 waitTimerForOltUp = 540
325 }
326 timeout(15) {
327 sh returnStdout: true, script: """
328 ssh-keyscan -H ${deployment_config.olts[i].sship} >> ~/.ssh/known_hosts
Andrea Campanellab3fe39d2021-06-11 15:48:59 +0200329 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'rm -f /var/log/openolt.log; rm -f /var/log/dev_mgmt_daemon.log; rm -f /var/log/openolt_process_watchdog.log; reboot > /dev/null &' || true
Matteo Scandolod43bb302021-04-20 10:19:29 -0700330 sleep ${waitTimerForOltUp}
331 """
332 }
333 timeout(15) {
334 waitUntil {
335 devprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep dev_mgmt_daemon | wc -l'"
336 return devprocess.toInteger() > 0
337 }
338 }
339 timeout(15) {
340 waitUntil {
341 openoltprocess = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].sship} 'ps -ef | grep openolt | wc -l'"
342 return openoltprocess.toInteger() > 0
343 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700344 }
345 }
346 }
347 }
348 }
349 }
350
351 post {
Matteo Scandolo0da60532021-05-06 08:59:42 -0700352 aborted {
353 getPodsInfo("$WORKSPACE/failed")
354 sh """
355 kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/failed/voltha.log || true
356 """
357 archiveArtifacts artifacts: '**/*.log,**/*.txt'
358 }
359 failure {
360 getPodsInfo("$WORKSPACE/failed")
361 sh """
362 kubectl logs -n voltha -l app.kubernetes.io/part-of=voltha > $WORKSPACE/failed/voltha.logs || true
363 """
364 archiveArtifacts artifacts: '**/*.log,**/*.txt'
365 }
Matteo Scandolod82d1de2021-04-06 14:55:58 -0700366 always {
367 archiveArtifacts artifacts: '*.txt'
368 }
369 }
370}