Creating pipelines for M-CORD Local and Remote
Change-Id: I458ac4deb288c09190599e5e240d9b8c34fc9b0a
diff --git a/Jenkinsfile-mcord-local-build b/Jenkinsfile-mcord-local-build
new file mode 100644
index 0000000..bee380c
--- /dev/null
+++ b/Jenkinsfile-mcord-local-build
@@ -0,0 +1,252 @@
+// Copyright 2017-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+node ("${TestNodeName}") {
+ timeout (100) {
+ try {
+ stage ("Parse deployment configuration file") {
+ sh returnStdout: true, script: "rm -rf helm-charts helm-repo-tools ${configBaseDir}"
+ sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/helm-repo-tools"
+ sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/helm-charts"
+ sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yaml"
+ }
+ stage('Clean up') {
+ timeout(10) {
+ sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ for hchart in \$(helm list -q | grep -E -v 'docker-registry|mavenrepo|ponnet');
+ do
+ echo "Purging chart: \${hchart}"
+ helm delete --purge "\${hchart}"
+ done
+ """
+ timeout(5) {
+ waitUntil {
+ helm_deleted = sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ helm ls -q | grep -E -v 'docker-registry|mavenrepo|ponnet' | wc -l
+ """
+ return helm_deleted.toInteger() == 0
+ }
+ }
+ timeout(5) {
+ dir ("helm-charts") {
+ stage("Cleanup SR-IOV CNI and SR-IOV Network Device Plugin") {
+ sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ kubectl delete -f mcord/cni-config/05-sriov-device-plugin.yaml
+ kubectl delete -f mcord/cni-config/04-sriov-device-plugin-configmap.yaml
+ kubectl delete -f mcord/cni-config/03-network-definition.yaml
+ kubectl delete -f mcord/cni-config/02-network-crd.yaml
+ kubectl delete -f mcord/cni-config/01-cni-service-account.yaml
+ """
+ }
+ }
+ }
+ timeout(5) {
+ waitUntil {
+ kubectl_deleted = sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ kubectl get pods --all-namespaces --no-headers | grep -E -v 'kube-system|docker-registry|mavenrepo|ponnet' | wc -l
+ """
+ return kubectl_deleted.toInteger() == 0
+ }
+ }
+ }
+ }
+ stage('Add Helm repositories') {
+ sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ helm init --upgrade --force-upgrade
+ helm repo add cord https://charts.opencord.org
+ helm repo add incubator http://storage.googleapis.com/kubernetes-charts-incubator
+ helm repo update
+ """
+ timeout(1) {
+ waitUntil {
+ tillerpod_running = sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ kubectl -n kube-system get pods | grep tiller-deploy | grep Running | wc -l
+ """
+ return tillerpod_running.toInteger() == 1
+ }
+ }
+ timeout(1) {
+ waitUntil {
+ cord_repo_present = sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ helm repo list | grep cord | wc -l
+ """
+ return cord_repo_present.toInteger() == 1
+ }
+ }
+ }
+
+ stage('Install etcd-cluster') {
+ timeout(10) {
+ sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --version 0.8.3 -n etcd-operator stable/etcd-operator
+ helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --set etcdNodePort=32379 cord/etcd-cluster
+ """
+ }
+ timeout(10) {
+ waitUntil {
+ etcd_running = sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ kubectl get pods | grep etcd | grep -i running | grep 1/1 | wc -l
+ """
+ return etcd_running.toInteger() == 6
+ }
+ }
+ }
+
+ dir ("helm-charts") {
+ stage('Install SR-IOV CNI and SR-IOV Network Device Plugin') {
+ sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ kubectl apply -f mcord/cni-config/02-network-crd.yaml
+ kubectl apply -f mcord/cni-config/
+ sleep 5
+ """
+ }
+ }
+
+ stage("Install M-CORD Control Plane Services") {
+ sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ helm install -n mcord-control-plane --namespace epc -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml cord/mcord-control-plane
+ """
+ }
+
+ stage("Install M-CORD Data Plane Services") {
+ sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ helm install -n mcord-data-plane --namespace epc -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml cord/mcord-data-plane
+ """
+ }
+
+ // stage('Install CORD Kafka') {
+ // timeout(10) {
+ // sh returnStdout: true, script: """
+ // export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ // helm install --version 0.8.8 --set configurationOverrides."offsets\\.topic\\.replication\\.factor"=1 --set configurationOverrides."log\\.retention\\.hours"=4 --set configurationOverrides."log\\.message\\.timestamp\\.type"="LogAppendTime" --set replicas=1 --set persistence.enabled=false --set zookeeper.replicaCount=1 --set zookeeper.persistence.enabled=false -n cord-kafka incubator/kafka
+ // """
+ // }
+ // timeout(10) {
+ // waitUntil {
+ // kafka_instances_running = sh returnStdout: true, script: """
+ // export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ // kubectl get pods | grep cord-kafka | grep -i running | grep 1/1 | wc -l
+ // """
+ // return kafka_instances_running.toInteger() == 2
+ // }
+ // }
+ // }
+ // stage('Install Logging Infrastructure') {
+ // timeout(10) {
+ // sh returnStdout: true, script: """
+ // export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ // helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --set elasticsearch.cluster.env.MINIMUM_MASTER_NODES="1" --set elasticsearch.client.replicas=1 --set elasticsearch.master.replicas=2 --set elasticsearch.master.persistence.enabled=false --set elasticsearch.data.replicas=1 --set elasticsearch.data.persistence.enabled=false -n logging cord/logging
+ // helm-repo-tools/wait_for_pods.sh
+ // """
+ // }
+ // }
+ // stage('Install Monitoring Infrastructure') {
+ // timeout(10) {
+ // sh returnStdout: true, script: """
+ // export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ // helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n nem-monitoring cord/nem-monitoring
+ // helm-repo-tools/wait_for_pods.sh
+ // """
+ // }
+ // }
+ // stage('Install ONOS') {
+ // timeout(10) {
+ // sh returnStdout: true, script: """
+ // export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ // helm install -n onos -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml cord/onos
+ // """
+ // }
+ // timeout(10) {
+ // waitUntil {
+ // onos_completed = sh returnStdout: true, script: """
+ // export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ // kubectl get pods | grep -i onos | grep -i running | grep 2/2 | wc -l
+ // """
+ // return onos_completed.toInteger() == 1
+ // }
+ // }
+ // }
+ // stage('Install xos-core') {
+ // timeout(10) {
+ // sh returnStdout: true, script: """
+ // export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ // helm install -f $WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n xos-core cord/xos-core
+ // """
+ // }
+ // timeout(10) {
+ // waitUntil {
+ // xos_core_completed = sh returnStdout: true, script: """
+ // export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ // kubectl get pods | grep -i xos | grep -i running | grep 1/1 | wc -l
+ // """
+ // return xos_core_completed.toInteger() == 6
+ // }
+ // }
+ // }
+
+ if ( params.configurePod ) {
+ dir ("${configBaseDir}/${configToscaDir}/att-workflow") {
+ stage('Configure R-CORD - Fabric and whitelist') {
+ timeout(1) {
+ waitUntil {
+ out_fabric = sh returnStdout: true, script: """
+ curl -s -H "xos-username:admin@opencord.org" -H "xos-password:letmein" -X POST --data-binary @${configFileName}-fabric.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
+ """
+ return out_fabric.toInteger() == 1
+ }
+ }
+ }
+ stage('Configure R-CORD - Subscriber') {
+ timeout(1) {
+ waitUntil {
+ out_subscriber = sh returnStdout: true, script: """
+ curl -s -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @${configFileName}-subscriber.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
+ """
+ return out_subscriber.toInteger() == 1
+ }
+ }
+ }
+ stage('Configure R-CORD - OLT') {
+ timeout(1) {
+ waitUntil {
+ out_olt = sh returnStdout: true, script: """
+ curl -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @${configFileName}-olt.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
+ """
+ return out_olt.toInteger() == 1
+ }
+ }
+ }
+ }
+ }
+ currentBuild.result = 'SUCCESS'
+ } catch (err) {
+ currentBuild.result = 'FAILURE'
+ step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false])
+ }
+ echo "RESULT: ${currentBuild.result}"
+ }
+}