blob: 5f1b519ab68180a626f9560cc8a2642b4fe377ff [file] [log] [blame]
// Copyright 2017-present Open Networking Foundation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
node ("${TestNodeName}") {
timeout (100) {
try {
stage ("Parse deployment configuration file") {
sh returnStdout: true, script: "rm -rf ${configBaseDir}"
sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yml"
}
stage('Clean up') {
timeout(10) {
sh returnStdout: true, script: """
rm -rf helm-charts cord-tester
git clone -b ${branch} ${cordRepoUrl}/helm-charts
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
for hchart in \$(helm list -q | grep -E -v 'docker-registry|mavenrepo|ponnet');
do
echo "Purging chart: \${hchart}"
helm delete --purge "\${hchart}"
done
"""
timeout(5) {
waitUntil {
helm_deleted = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
helm ls -q | grep -E -v 'docker-registry|mavenrepo|ponnet' | wc -l
"""
return helm_deleted.toInteger() == 0
}
}
timeout(5) {
waitUntil {
kubectl_deleted = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods --all-namespaces --no-headers | grep -E -v 'kube-system|docker-registry|mavenrepo|ponnet' | wc -l
"""
return kubectl_deleted.toInteger() == 0
}
}
}
}
dir ("helm-charts") {
stage('Install Voltha Kafka') {
timeout(10) {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install --name voltha-kafka --set replicas=1 --set persistence.enabled=false --set zookeeper.replicaCount=1 --set zookeeper.persistence.enabled=false incubator/kafka
"""
}
timeout(10) {
waitUntil {
kafka_instances_running = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods | grep voltha-kafka | grep -i running | grep 1/1 | wc -l
"""
return kafka_instances_running.toInteger() == 2
}
}
}
stage('Install voltha') {
timeout(10) {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com/
helm dep build voltha
helm install -n voltha -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --set etcd-operator.customResources.createEtcdClusterCRD=false voltha
helm upgrade -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --set etcd-operator.customResources.createEtcdClusterCRD=true voltha ./voltha
"""
}
timeout(10) {
waitUntil {
voltha_completed = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods -n voltha | grep -i running | grep 1/1 | wc -l
"""
return voltha_completed.toInteger() == 8
}
}
}
stage('Install ONOS') {
timeout(10) {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm install -n onos -f configs/onos.yaml -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml onos
"""
}
timeout(10) {
waitUntil {
onos_completed = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods | grep -i onos | grep -i running | grep 1/1 | wc -l
"""
return onos_completed.toInteger() == 1
}
}
}
stage('Install xos-core') {
timeout(10) {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm dep update xos-core
helm install -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n xos-core xos-core
"""
}
timeout(10) {
waitUntil {
xos_core_completed = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods | grep -i xos | grep -i running | grep 1/1 | wc -l
"""
return xos_core_completed.toInteger() == 7
}
}
}
stage('Install rcord-lite') {
timeout(10) {
sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
helm dep update xos-profiles/rcord-lite
helm install -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n rcord-lite xos-profiles/rcord-lite
"""
}
timeout(10) {
waitUntil {
rcord_tosca_completed = sh returnStdout: true, script: """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
kubectl get pods | grep -i tosca-loader | grep -i completed | wc -l
"""
return rcord_tosca_completed.toInteger() == 1
}
}
}
}
stage('Reinstall OLT software') {
for(int i=0; i < deployment_config.olts.size(); i++) {
sh returnStdout: true, script: """
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'
"""
timeout(5) {
waitUntil {
olt_sw_present = sh returnStdout: true, script: """
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l'
"""
return olt_sw_present.toInteger() == 0
}
}
sh returnStdout: true, script: """
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} "dpkg --install ${oltDebVersion}"
"""
timeout(5) {
waitUntil {
olt_sw_present = sh returnStdout: true, script: """
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l'
"""
return olt_sw_present.toInteger() == 1
}
}
// If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
if ("${deployment_config.olts[i].fortygig}" != null && "${deployment_config.olts[i].fortygig}" == 'true') {
sh returnStdout: true, script: """
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'echo "port ce128 sp=40000" >> /broadcom/qax.soc'
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '/opt/bcm68620/svk_init.sh'
"""
}
}
}
stage('Restart OLT processes') {
for(int i=0; i < deployment_config.olts.size(); i++) {
timeout(5) {
sh returnStdout: true, script: """
ssh-keyscan -H ${deployment_config.olts[i].ip} >> ~/.ssh/known_hosts
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'pkill bal_core_dist' || true
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'pkill openolt' || true
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /broadcom/bal.log'
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /broadcom/openolt.log'
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cd /broadcom; ./bal_core_dist -C :55001 < /dev/tty1 > ./bal.log 2>&1 &'
sleep 5
sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cd /broadcom; ./openolt -C 127.0.0.1:55001 < /dev/tty1 > ./openolt.log 2>&1 &'
"""
}
timeout(15) {
waitUntil {
onu_discovered = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cat /broadcom/openolt.log | grep \"oper_state:up\" | wc -l'"
return onu_discovered.toInteger() > 0
}
}
}
}
stage('Download cord-tester repo') {
timeout(2) {
sh returnStdout: true, script: """
git clone -b ${branch} ${cordRepoUrl}/cord-tester
"""
}
}
stage('Validate installed PODs') {
timeout(10) {
sh """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
cd $WORKSPACE/cord-tester/src/test/robot/
rm -rf Log/ || true
pybot -d Log -T SanityK8POD.robot || true
"""
}
}
stage('Configurations and Tests') {
timeout(10) {
sh """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
cd $WORKSPACE/cord-tester/src/test/cord-api/Properties/
sed -i \"s/^\\(SERVER_IP = \\).*/\\1\'${deployment_config.nodes[0].ip}\'/\" RestApiProperties.py
sed -i \"s/^\\(SERVER_PORT = \\).*/\\1\'30006\'/\" RestApiProperties.py
sed -i \"s/^\\(XOS_USER = \\).*/\\1\'admin@opencord.org\'/\" RestApiProperties.py
sed -i \"s/^\\(XOS_PASSWD = \\).*/\\1\'letmein\'/\" RestApiProperties.py
cd $WORKSPACE/cord-tester/src/test/cord-api/Tests/
rm -rf Log/ || true
pybot -d Log -T FabricConfig.txt || true
pybot -d Log -T RealOLT_Test.txt || true
sleep 120
pybot -d Log -T Subscriber_TopDown.txt || true
"""
}
}
stage('Subscriber Validation and Ping Tests') {
timeout(30) {
sh """
export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
cd $WORKSPACE/cord-tester/src/test/cord-api/Tests/
pybot -d Log -T -v src_ip:${deployment_config.srcHost.ip} -v src_user:${deployment_config.srcHost.user} -v src_pass:${deployment_config.srcHost.pass} -v dst_user:${deployment_config.dstHost.user} -v dst_pass:${deployment_config.dstHost.pass} -v dst_ip:${deployment_config.dstHost.ip} -v dst_host_ip:${deployment_config.dstHost.hostIp} -v src_gateway:${deployment_config.srcHost.gateway} -v dst_gateway:${deployment_config.dstHost.gateway} -v init_state:disabled -v INITIAL_STATUS:FAIL -v ENABLE_STATUS:PASS -e zerotouch Subscriber_StatusChecks.txt || true
"""
}
}
stage('Publish test results') {
sh returnStdout: true, script: """
if [ -d RobotLogs ]; then rm -r RobotLogs; fi; mkdir RobotLogs;
mkdir RobotLogs/TestDoc || true
cp -r $WORKSPACE/cord-tester/src/test/robot/Log/* $WORKSPACE/RobotLogs || true
cp -r $WORKSPACE/cord-tester/src/test/cord-api/Tests/Log/* $WORKSPACE/RobotLogs || true
"""
step([$class: 'RobotPublisher',
disableArchiveOutput: false,
logFileName: 'RobotLogs/log*.html',
otherFiles: '',
outputFileName: 'RobotLogs/output*.xml',
outputPath: '.',
passThreshold: 100,
reportFileName: 'RobotLogs/report*.html',
unstableThreshold: 0
])
}
currentBuild.result = 'SUCCESS'
} catch (err) {
currentBuild.result = 'FAILURE'
step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false])
}
echo "RESULT: ${currentBuild.result}"
}
}