Implement changes to cord-tester framework for vrouter configuration.
And add vrouter tests to verify routes.
diff --git a/src/test/setup/quagga-config/start.sh b/src/test/setup/quagga-config/start.sh
index 5b140ca..77e342b 100755
--- a/src/test/setup/quagga-config/start.sh
+++ b/src/test/setup/quagga-config/start.sh
@@ -2,4 +2,5 @@
ulimit -n 65536
ip a add 10.10.0.3/16 dev eth1
#bgpd -u root -f /root/config/bgpd.conf &
-/usr/local/sbin/zebra -u root -f /root/config/testrib.conf
+conf_file=${1:-/root/config/testrib.conf}
+/usr/local/sbin/zebra -u root -f $conf_file
diff --git a/src/test/setup/quagga-config/testrib.conf b/src/test/setup/quagga-config/testrib.conf
index 2a02337..af2f213 100644
--- a/src/test/setup/quagga-config/testrib.conf
+++ b/src/test/setup/quagga-config/testrib.conf
@@ -15,37 +15,6 @@
! statics that should be subsumed by connected routes, according to interface
! state
-ip route 50.10.0.0/24 172.17.0.4
-ip route 50.10.0.0/24 172.17.0.3
-ip route 50.10.0.0/24 172.17.0.2
-ip route 60.10.0.0/24 172.17.0.4
-ip route 60.10.0.0/24 172.17.0.3
-ip route 70.10.0.0/24 172.17.0.4
-ip route 70.10.0.0/24 172.17.0.3
-ip route 80.10.0.0/24 172.17.0.4
-ip route 80.10.0.0/24 172.17.0.3
-ip route 90.10.0.0/24 172.17.0.4
-ip route 90.10.0.0/24 172.17.0.3
-ip route 100.10.0.0/24 172.17.0.4
-ip route 100.10.0.0/24 172.17.0.3
-ip route 120.10.0.0/24 172.17.0.4
-ip route 120.10.0.0/24 172.17.0.3
-ip route 50.10.0.0/24 172.17.0.6
-ip route 50.10.0.0/24 172.17.0.3
-ip route 50.10.0.0/24 172.17.0.2
-ip route 50.10.0.0/24 172.17.0.4
-ip route 60.10.0.0/24 172.17.0.7
-ip route 60.10.0.0/24 172.17.0.3
-ip route 60.10.0.0/24 172.17.0.4
-ip route 70.10.0.0/24 172.17.0.1
-ip route 70.10.0.0/24 172.17.0.3
-ip route 70.10.0.0/24 172.17.0.2
-ip route 80.10.0.0/24 172.17.0.2
-ip route 80.10.0.0/24 172.17.0.3
-ip route 80.10.0.0/24 172.17.0.4
-ip route 90.10.0.0/24 172.17.0.3
-ip route 90.10.0.0/24 172.17.0.2
-ip route 90.10.0.0/24 172.17.0.4
line vty
exec-timeout 0 0
!