Enable multi-subscriber support with ponsim.
Change-Id: I8ad6684f717ca78074f815d0907e8909e500734d
diff --git a/src/test/setup/cord-test.py b/src/test/setup/cord-test.py
index 6f8ffe7..73b2db5 100755
--- a/src/test/setup/cord-test.py
+++ b/src/test/setup/cord-test.py
@@ -243,22 +243,45 @@
res = 0
switches = self.port_map['switches']
start_vlan = self.port_map['start_vlan']
+ ponsim = self.port_map['ponsim']
start_vlan += port_num
uplink = self.port_map['uplink']
wan = self.port_map['wan']
+ if ponsim is True:
+ if not wan:
+ wan = 'ponmgmt'
vcpe_port_num = port_num
port_list = self.port_map['switch_port_list'] + self.port_map['switch_relay_port_list']
print('Provisioning the ports for the test container\n')
for host_intf, ports in port_list:
+ setup_ponsim = ponsim
+ host_index = 0
+ host_intf_base = 'pon1'
#if the host interface/switch does not exist, just create a dummy ovs switch
#needed if we are running with no-switch option
if not os.access('/sys/class/net/{}'.format(host_intf), os.F_OK):
os.system('ovs-vsctl add-br {}'.format(host_intf))
uplink = self.port_map[host_intf]['uplink']
+ if setup_ponsim is True:
+ if host_intf.find('_') < 0:
+ print('Invalid host interface specified with ponsim. Disabling ponsim setup')
+ setup_ponsim = False
+ else:
+ try:
+ host_index = int(host_intf.split('_')[-1])
+ host_intf_base = host_intf.split('_')[0]
+ except:
+ print('Invalid host interface with ponsim. Disabling ponsim setup')
+ setup_ponsim = False
for port in ports:
guest_if = port
local_if = 'l{}'.format(port_num+1) #port #'{0}_{1}'.format(guest_if, port_num+1)
guest_ip = '{0}.{1}/24'.format(tester_intf_subnet, port_num+1)
+ if setup_ponsim is True:
+ if port != self.port_map[uplink]:
+ host_intf = '{}_{}'.format(host_intf_base, host_index)
+ host_index += 1
+
##Use pipeworks to configure container interfaces on host/bridge interfaces
pipework_cmd = 'pipework {0} -i {1} -l {2} {3} {4}'.format(host_intf, guest_if,
local_if, self.name, guest_ip)
@@ -270,7 +293,7 @@
if start_vlan != 0:
pipework_cmd += ' @{}'.format(start_vlan)
start_vlan += 1
- #print('Running PIPEWORK cmd: %s' %pipework_cmd)
+ print('Running PIPEWORK cmd: %s' %pipework_cmd)
res += os.system(pipework_cmd)
port_num += 1
@@ -668,7 +691,7 @@
if voltha_loc:
#start voltha
- voltha = VolthaService(voltha_loc, onos_ips[0], interface = voltha_intf)
+ voltha = VolthaService(voltha_loc, onos_ips[0], interface = voltha_intf, olt_config = olt_config_file)
voltha.start()
if radius_ip is None:
@@ -944,7 +967,7 @@
if voltha_loc:
#start voltha
- voltha = VolthaService(voltha_loc, onos_ips[0], interface = voltha_intf)
+ voltha = VolthaService(voltha_loc, onos_ips[0], interface = voltha_intf, olt_config = olt_config_file)
voltha.start()
##Start Radius container if not started