Test: Gradle and ansible scripts to deploy and run cord test verify.
Change-Id: Iac6e14819072b5b6bc1de53332023366f5dcb411
diff --git a/config/pod5.yml b/config/pod5.yml
new file mode 100644
index 0000000..c54f9c4
--- /dev/null
+++ b/config/pod5.yml
@@ -0,0 +1,36 @@
+# Deployment configuration for a phyical hardware POD
+---
+seedServer:
+ ip: '47.135.132.21'
+ # User name and password used by Ansible to connect to the host for remote
+ # provisioning
+ user: 'ubuntu'
+ password: 'ubuntu'
+
+ # Network address information for the head node:
+ #
+ # fabric_ip - the IP address and mask bits to be used to configure the network
+ # interface connected to the leaf - spine fabric
+ #
+ # management_ip - the IP address and mask bits to be used to configure the network
+ # interface connecting the head node to the POD internal
+ # management network. The head node will deliver DHCP addresses to
+ # the other compute nodes over this interface
+ #
+ # external_ip - the IP address and mask bits to be used to configure the network
+ # interface connecting the head node (and the POD) to the
+ # Internet. All traffic in the POD to external hosts will be
+ # NAT-ed through this interface
+ fabric_ip: '10.6.1.1/24'
+ management_ip: '10.6.0.1/24'
+ external_ip: '47.135.132.21/24'
+
+otherNodes:
+ # Experimental
+ #
+ # Specifies the subnet and address range that will be used to allocate IP addresses
+ # to the compute nodes as they are deployed into the POD.
+ fabric:
+ network: 10.6.1.1/24
+ range_low: 10.6.1.2
+ range_high: 10.6.1.253