Changes to automatically provision,build and run Radius containers for Auth tests.
Changes to cord test server to handle radius server restart requests.
diff --git a/src/test/setup/radius-config/freeradius/mods-config/files/accounting b/src/test/setup/radius-config/freeradius/mods-config/files/accounting
new file mode 100644
index 0000000..552b274
--- /dev/null
+++ b/src/test/setup/radius-config/freeradius/mods-config/files/accounting
@@ -0,0 +1,23 @@
+#
+# $Id: 322d33a01f26e3990ba19954b7847e6993ae389b $
+#
+# This is like the 'users' file, but it is processed only for
+# accounting packets.
+#
+
+# Select between different accounting methods based for example on the
+# Realm, the Huntgroup-Name or any combinaison of the attribute/value
+# pairs contained in an accounting packet.
+#
+#DEFAULT Realm == "foo.net", Acct-Type := sql_log.foo
+#
+#DEFAULT Huntgroup-Name == "wifi", Acct-Type := sql_log.wifi
+#
+#DEFAULT Client-IP-Address == 10.0.0.1, Acct-Type := sql_log.other
+#
+#DEFAULT Acct-Status-Type == Start, Acct-Type := sql_log.start
+
+# Replace the User-Name with the Stripped-User-Name, if it exists.
+#
+#DEFAULT
+# User-Name := "%{%{Stripped-User-Name}:-%{User-Name}}"
diff --git a/src/test/setup/radius-config/freeradius/mods-config/files/authorize b/src/test/setup/radius-config/freeradius/mods-config/files/authorize
new file mode 100644
index 0000000..3528563
--- /dev/null
+++ b/src/test/setup/radius-config/freeradius/mods-config/files/authorize
@@ -0,0 +1,218 @@
+#
+# Configuration file for the rlm_files module.
+# Please see rlm_files(5) manpage for more information.
+#
+# This file contains authentication security and configuration
+# information for each user. Accounting requests are NOT processed
+# through this file. Instead, see 'accounting', in this directory.
+#
+# The first field is the user's name and can be up to
+# 253 characters in length. This is followed (on the same line) with
+# the list of authentication requirements for that user. This can
+# include password, comm server name, comm server port number, protocol
+# type (perhaps set by the "hints" file), and huntgroup name (set by
+# the "huntgroups" file).
+#
+# If you are not sure why a particular reply is being sent by the
+# server, then run the server in debugging mode (radiusd -X), and
+# you will see which entries in this file are matched.
+#
+# When an authentication request is received from the comm server,
+# these values are tested. Only the first match is used unless the
+# "Fall-Through" variable is set to "Yes".
+#
+# A special user named "DEFAULT" matches on all usernames.
+# You can have several DEFAULT entries. All entries are processed
+# in the order they appear in this file. The first entry that
+# matches the login-request will stop processing unless you use
+# the Fall-Through variable.
+#
+# Indented (with the tab character) lines following the first
+# line indicate the configuration values to be passed back to
+# the comm server to allow the initiation of a user session.
+# This can include things like the PPP configuration values
+# or the host to log the user onto.
+#
+# You can include another `users' file with `$INCLUDE users.other'
+
+#
+# For a list of RADIUS attributes, and links to their definitions,
+# see: http://www.freeradius.org/rfc/attributes.html
+#
+# Entries below this point are examples included in the server for
+# educational purposes. They may be deleted from the deployed
+# configuration without impacting the operation of the server.
+#
+
+#
+# Deny access for a specific user. Note that this entry MUST
+# be before any other 'Auth-Type' attribute which results in the user
+# being authenticated.
+#
+# Note that there is NO 'Fall-Through' attribute, so the user will not
+# be given any additional resources.
+#
+#lameuser Auth-Type := Reject
+# Reply-Message = "Your account has been disabled."
+
+#
+# Deny access for a group of users.
+#
+# Note that there is NO 'Fall-Through' attribute, so the user will not
+# be given any additional resources.
+#
+#DEFAULT Group == "disabled", Auth-Type := Reject
+# Reply-Message = "Your account has been disabled."
+#
+
+#
+# This is a complete entry for "steve". Note that there is no Fall-Through
+# entry so that no DEFAULT entry will be used, and the user will NOT
+# get any attributes in addition to the ones listed here.
+#
+#steve Cleartext-Password := "testing"
+# Service-Type = Framed-User,
+# Framed-Protocol = PPP,
+# Framed-IP-Address = 172.16.3.33,
+# Framed-IP-Netmask = 255.255.255.0,
+# Framed-Routing = Broadcast-Listen,
+# Framed-Filter-Id = "std.ppp",
+# Framed-MTU = 1500,
+# Framed-Compression = Van-Jacobsen-TCP-IP
+
+#
+# The canonical testing user which is in most of the
+# examples.
+#
+#bob Cleartext-Password := "hello"
+# Reply-Message := "Hello, %{User-Name}"
+#
+
+test Cleartext-Password := "test"
+ Reply-Message := "Hello, %{User-Name}"
+
+raduser Cleartext-Password := "radpass"
+ Reply-Message := "Hello, %{User-Name}"
+
+#
+# This is an entry for a user with a space in their name.
+# Note the double quotes surrounding the name. If you have
+# users with spaces in their names, you must also change
+# the "filter_username" policy to allow spaces.
+#
+# See raddb/policy.d/filter, filter_username {} section.
+#
+#"John Doe" Cleartext-Password := "hello"
+# Reply-Message = "Hello, %{User-Name}"
+
+#
+# Dial user back and telnet to the default host for that port
+#
+#Deg Cleartext-Password := "ge55ged"
+# Service-Type = Callback-Login-User,
+# Login-IP-Host = 0.0.0.0,
+# Callback-Number = "9,5551212",
+# Login-Service = Telnet,
+# Login-TCP-Port = Telnet
+
+#
+# Another complete entry. After the user "dialbk" has logged in, the
+# connection will be broken and the user will be dialed back after which
+# he will get a connection to the host "timeshare1".
+#
+#dialbk Cleartext-Password := "callme"
+# Service-Type = Callback-Login-User,
+# Login-IP-Host = timeshare1,
+# Login-Service = PortMaster,
+# Callback-Number = "9,1-800-555-1212"
+
+#
+# user "swilson" will only get a static IP number if he logs in with
+# a framed protocol on a terminal server in Alphen (see the huntgroups file).
+#
+# Note that by setting "Fall-Through", other attributes will be added from
+# the following DEFAULT entries
+#
+#swilson Service-Type == Framed-User, Huntgroup-Name == "alphen"
+# Framed-IP-Address = 192.0.2.65,
+# Fall-Through = Yes
+
+#
+# If the user logs in as 'username.shell', then authenticate them
+# using the default method, give them shell access, and stop processing
+# the rest of the file.
+#
+#DEFAULT Suffix == ".shell"
+# Service-Type = Login-User,
+# Login-Service = Telnet,
+# Login-IP-Host = your.shell.machine
+
+
+#
+# The rest of this file contains the several DEFAULT entries.
+# DEFAULT entries match with all login names.
+# Note that DEFAULT entries can also Fall-Through (see first entry).
+# A name-value pair from a DEFAULT entry will _NEVER_ override
+# an already existing name-value pair.
+#
+
+#
+# Set up different IP address pools for the terminal servers.
+# Note that the "+" behind the IP address means that this is the "base"
+# IP address. The Port-Id (S0, S1 etc) will be added to it.
+#
+#DEFAULT Service-Type == Framed-User, Huntgroup-Name == "alphen"
+# Framed-IP-Address = 192.0.2.32+,
+# Fall-Through = Yes
+
+#DEFAULT Service-Type == Framed-User, Huntgroup-Name == "delft"
+# Framed-IP-Address = 198.51.100.32+,
+# Fall-Through = Yes
+
+#
+# Sample defaults for all framed connections.
+#
+#DEFAULT Service-Type == Framed-User
+# Framed-IP-Address = 255.255.255.254,
+# Framed-MTU = 576,
+# Service-Type = Framed-User,
+# Fall-Through = Yes
+
+#
+# Default for PPP: dynamic IP address, PPP mode, VJ-compression.
+# NOTE: we do not use Hint = "PPP", since PPP might also be auto-detected
+# by the terminal server in which case there may not be a "P" suffix.
+# The terminal server sends "Framed-Protocol = PPP" for auto PPP.
+#
+DEFAULT Framed-Protocol == PPP
+ Framed-Protocol = PPP,
+ Framed-Compression = Van-Jacobson-TCP-IP
+
+#
+# Default for CSLIP: dynamic IP address, SLIP mode, VJ-compression.
+#
+DEFAULT Hint == "CSLIP"
+ Framed-Protocol = SLIP,
+ Framed-Compression = Van-Jacobson-TCP-IP
+
+#
+# Default for SLIP: dynamic IP address, SLIP mode.
+#
+DEFAULT Hint == "SLIP"
+ Framed-Protocol = SLIP
+
+#
+# Last default: rlogin to our main server.
+#
+#DEFAULT
+# Service-Type = Login-User,
+# Login-Service = Rlogin,
+# Login-IP-Host = shellbox.ispdomain.com
+
+# #
+# # Last default: shell on the local terminal server.
+# #
+# DEFAULT
+# Service-Type = Administrative-User
+
+# On no match, the user is denied access.
diff --git a/src/test/setup/radius-config/freeradius/mods-config/files/pre-proxy b/src/test/setup/radius-config/freeradius/mods-config/files/pre-proxy
new file mode 100644
index 0000000..9c848fd
--- /dev/null
+++ b/src/test/setup/radius-config/freeradius/mods-config/files/pre-proxy
@@ -0,0 +1,31 @@
+#
+# Configuration file for the rlm_files module.
+# Please see rlm_files(5) manpage for more information.
+#
+# $Id: 7292e23ea51717ee5cb50c4b9b609e91ebe4a41c $
+#
+# This file is similar to the "users" file. The check items
+# are compared against the request, but the "reply" items are
+# used to update the proxied packet, not the reply to the NAS.
+#
+# You can use this file to re-write requests which are about to
+# be sent to a home server.
+#
+
+#
+# Requests destinated to realm "extisp" are sent to a RADIUS
+# home server hosted by an other company which doesn't know about
+# the IP addresses of our NASes. Therefore we replace the value of
+# the NAS-IP-Address attribute by a unique value we communicated
+# to them.
+#
+#DEFAULT Realm == "extisp"
+# NAS-IP-Address := 10.1.2.3
+
+#
+# For all proxied packets, set the User-Name in the proxied packet
+# to the Stripped-User-Name, if it exists. If not, set it to the
+# User-Name from the original request.
+#
+#DEFAULT
+# User-Name := `%{%{Stripped-User-Name}:-%{User-Name}}`