Changes to automatically provision,build and run Radius containers for Auth tests.
Changes to cord test server to handle radius server restart requests.
diff --git a/src/test/setup/radius-config/freeradius/mods-config/preprocess/huntgroups b/src/test/setup/radius-config/freeradius/mods-config/preprocess/huntgroups
new file mode 100644
index 0000000..a937c8b
--- /dev/null
+++ b/src/test/setup/radius-config/freeradius/mods-config/preprocess/huntgroups
@@ -0,0 +1,46 @@
+#
+# huntgroups This file defines the `huntgroups' that you have. A
+# huntgroup is defined by specifying the IP address of
+# the NAS and possibly a port range. Port can be identified
+# as just one port, or a range (from-to), and multiple ports
+# or ranges of ports must be separated by a comma. For
+# example: 1,2,3-8
+#
+# Matching is done while RADIUS scans the user file; if it
+# includes the selection criterium "Huntgroup-Name == XXX"
+# the huntgroup is looked up in this file to see if it
+# matches. There can be multiple definitions of the same
+# huntgroup; the first one that matches will be used.
+#
+# This file can also be used to define restricted access
+# to certain huntgroups. The second and following lines
+# define the access restrictions (based on username and
+# UNIX usergroup) for the huntgroup.
+#
+
+#
+# Our POP in Alphen a/d Rijn has 3 terminal servers. Create a Huntgroup-Name
+# called Alphen that matches on all three terminal servers.
+#
+#alphen NAS-IP-Address == 192.0.2.5
+#alphen NAS-IP-Address == 192.0.2.6
+#alphen NAS-IP-Address == 192.0.2.7
+
+#
+# The POP in Delft consists of only one terminal server.
+#
+#delft NAS-IP-Address == 198.51.100.5
+
+#
+# Ports 0-7 on the first terminal server in Alphen are connected to
+# a huntgroup that is for business users only. Note that only one
+# of the username or groupname has to match to get access (OR/OR).
+#
+# Note that this huntgroup is a subset of the "alphen" huntgroup.
+#
+#business NAS-IP-Address == 198.51.100.5, NAS-Port-Id == 0-7
+# User-Name = rogerl,
+# User-Name = henks,
+# Group = business,
+# Group = staff
+