Changes to automatically provision,build and run Radius containers for Auth tests.
Changes to cord test server to handle radius server restart requests.
diff --git a/src/test/setup/radius-config/freeradius/mods-config/sql/main/sqlite/queries.conf b/src/test/setup/radius-config/freeradius/mods-config/sql/main/sqlite/queries.conf
new file mode 100644
index 0000000..c91f543
--- /dev/null
+++ b/src/test/setup/radius-config/freeradius/mods-config/sql/main/sqlite/queries.conf
@@ -0,0 +1,397 @@
+# -*- text -*-
+#
+# main/sqlite/queries.conf -- SQLite configuration for default schema (schema.sql)
+#
+# Id: e1e83bf94814ed8be6239977b7bacfed21c0cd6a $
+
+# Safe characters list for sql queries. Everything else is replaced
+# with their mime-encoded equivalents.
+# The default list should be ok
+#safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
+
+#######################################################################
+# Query config: Username
+#######################################################################
+# This is the username that will get substituted, escaped, and added
+# as attribute 'SQL-User-Name'. '%{SQL-User-Name}' should be used below
+# everywhere a username substitution is needed so you you can be sure
+# the username passed from the client is escaped properly.
+#
+# Uncomment the next line, if you want the sql_user_name to mean:
+#
+# Use Stripped-User-Name, if it's there.
+# Else use User-Name, if it's there,
+# Else use hard-coded string "DEFAULT" as the user name.
+#sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}"
+#
+sql_user_name = "%{User-Name}"
+
+#######################################################################
+# Default profile
+#######################################################################
+# This is the default profile. It is found in SQL by group membership.
+# That means that this profile must be a member of at least one group
+# which will contain the corresponding check and reply items.
+# This profile will be queried in the authorize section for every user.
+# The point is to assign all users a default profile without having to
+# manually add each one to a group that will contain the profile.
+# The SQL module will also honor the User-Profile attribute. This
+# attribute can be set anywhere in the authorize section (ie the users
+# file). It is found exactly as the default profile is found.
+# If it is set then it will *overwrite* the default profile setting.
+# The idea is to select profiles based on checks on the incoming packets,
+# not on user group membership. For example:
+# -- users file --
+# DEFAULT Service-Type == Outbound-User, User-Profile := "outbound"
+# DEFAULT Service-Type == Framed-User, User-Profile := "framed"
+#
+# By default the default_user_profile is not set
+#
+#default_user_profile = "DEFAULT"
+
+#######################################################################
+# NAS Query
+#######################################################################
+# This query retrieves the radius clients
+#
+# 0. Row ID (currently unused)
+# 1. Name (or IP address)
+# 2. Shortname
+# 3. Type
+# 4. Secret
+# 5. Server
+#######################################################################
+
+client_query = "\
+ SELECT id, nasname, shortname, type, secret, server \
+ FROM ${client_table}"
+
+#######################################################################
+# Authorization Queries
+#######################################################################
+# These queries compare the check items for the user
+# in ${authcheck_table} and setup the reply items in
+# ${authreply_table}. You can use any query/tables
+# you want, but the return data for each row MUST
+# be in the following order:
+#
+# 0. Row ID (currently unused)
+# 1. UserName/GroupName
+# 2. Item Attr Name
+# 3. Item Attr Value
+# 4. Item Attr Operation
+#######################################################################
+
+#
+# Use these for case sensitive usernames.
+#
+#authorize_check_query = "\
+# SELECT id, username, attribute, value, op \
+# FROM ${authcheck_table} \
+# WHERE username = BINARY '%{SQL-User-Name}' \
+# ORDER BY id"
+
+#authorize_reply_query = "\
+# SELECT id, username, attribute, value, op \
+# FROM ${authreply_table} \
+# WHERE username = BINARY '%{SQL-User-Name}' \
+# ORDER BY id"
+
+#
+# The default queries are case insensitive. (for compatibility with older versions of FreeRADIUS)
+#
+authorize_check_query = "\
+ SELECT id, username, attribute, value, op \
+ FROM ${authcheck_table} \
+ WHERE username = '%{SQL-User-Name}' \
+ ORDER BY id"
+
+authorize_reply_query = "\
+ SELECT id, username, attribute, value, op \
+ FROM ${authreply_table} \
+ WHERE username = '%{SQL-User-Name}' \
+ ORDER BY id"
+
+#
+# Use these for case sensitive usernames.
+#
+#group_membership_query = "\
+# SELECT groupname \
+# FROM ${usergroup_table} \
+# WHERE username = BINARY '%{SQL-User-Name}' \
+# ORDER BY priority"
+
+group_membership_query = "\
+ SELECT groupname \
+ FROM ${usergroup_table} \
+ WHERE username = '%{SQL-User-Name}' \
+ ORDER BY priority"
+
+authorize_group_check_query = "\
+ SELECT id, groupname, attribute, \
+ Value, op \
+ FROM ${groupcheck_table} \
+ WHERE groupname = '%{Sql-Group}' \
+ ORDER BY id"
+
+authorize_group_reply_query = "\
+ SELECT id, groupname, attribute, \
+ value, op \
+ FROM ${groupreply_table} \
+ WHERE groupname = '%{Sql-Group}' \
+ ORDER BY id"
+
+#######################################################################
+# Simultaneous Use Checking Queries
+#######################################################################
+# simul_count_query - query for the number of current connections
+# - If this is not defined, no simultaneouls use checking
+# - will be performed by this module instance
+# simul_verify_query - query to return details of current connections
+# for verification
+# - Leave blank or commented out to disable verification step
+# - Note that the returned field order should not be changed.
+#######################################################################
+
+#
+# Uncomment simul_count_query to enable simultaneous use checking
+#
+#simul_count_query = "\
+# SELECT COUNT(*) \
+# FROM ${acct_table1} \
+# WHERE username = '%{SQL-User-Name}' \
+# AND acctstoptime IS NULL"
+
+simul_verify_query = "\
+ SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, \
+ callingstationid, framedprotocol \
+ FROM ${acct_table1} \
+ WHERE username = '%{SQL-User-Name}' \
+ AND acctstoptime IS NULL"
+
+#######################################################################
+# Accounting and Post-Auth Queries
+#######################################################################
+# These queries insert/update accounting and authentication records.
+# The query to use is determined by the value of 'reference'.
+# This value is used as a configuration path and should resolve to one
+# or more 'query's. If reference points to multiple queries, and a query
+# fails, the next query is executed.
+#
+# Behaviour is identical to the old 1.x/2.x module, except we can now
+# fail between N queries, and query selection can be based on any
+# combination of attributes, or custom 'Acct-Status-Type' values.
+#######################################################################
+accounting {
+ reference = "%{tolower:type.%{Acct-Status-Type}.query}"
+
+ # Write SQL queries to a logfile. This is potentially useful for bulk inserts
+ # when used with the rlm_sql_null driver.
+# logfile = ${logdir}/accounting.sql
+
+ column_list = "\
+ acctsessionid, acctuniqueid, username, \
+ realm, nasipaddress, nasportid, \
+ nasporttype, acctstarttime, acctupdatetime, \
+ acctstoptime, acctsessiontime, acctauthentic, \
+ connectinfo_start, connectinfo_stop, acctinputoctets, \
+ acctoutputoctets, calledstationid, callingstationid, \
+ acctterminatecause, servicetype, framedprotocol, \
+ framedipaddress"
+
+ type {
+ accounting-on {
+ #
+ # Bulk terminate all sessions associated with a given NAS
+ #
+ query = "\
+ UPDATE ${....acct_table1} \
+ SET \
+ acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, \
+ acctsessiontime = \
+ %{%{integer:Event-Timestamp}:-strftime('%s', 'now')} \
+ - strftime('%s', acctstarttime)), \
+ acctterminatecause = '%{Acct-Terminate-Cause}' \
+ WHERE acctstoptime IS NULL \
+ AND nasipaddress = '%{NAS-IP-Address}' \
+ AND acctstarttime <= %{integer:Event-Timestamp}"
+ }
+
+ accounting-off {
+ query = "${..accounting-on.query}"
+ }
+
+ start {
+ #
+ # Insert a new record into the sessions table
+ #
+ query = "\
+ INSERT INTO ${....acct_table1} \
+ (${...column_list}) \
+ VALUES \
+ ('%{Acct-Session-Id}', \
+ '%{Acct-Unique-Session-Id}', \
+ '%{SQL-User-Name}', \
+ '%{Realm}', \
+ '%{NAS-IP-Address}', \
+ '%{NAS-Port}', \
+ '%{NAS-Port-Type}', \
+ %{%{integer:Event-Timestamp}:-date('now')}, \
+ %{%{integer:Event-Timestamp}:-date('now')}, \
+ NULL, \
+ '0', \
+ '%{Acct-Authentic}', \
+ '%{Connect-Info}', \
+ '', \
+ '0', \
+ '0', \
+ '%{Called-Station-Id}', \
+ '%{Calling-Station-Id}', \
+ '', \
+ '%{Service-Type}', \
+ '%{Framed-Protocol}', \
+ '%{Framed-IP-Address}')"
+
+ #
+ # Key constraints prevented us from inserting a new session,
+ # use the alternate query to update an existing session.
+ #
+ query = "\
+ UPDATE ${....acct_table1} SET \
+ acctstarttime = %{%{integer:Event-Timestamp}:-date('now')}, \
+ acctupdatetime = %{%{integer:Event-Timestamp}:-date('now'))}, \
+ connectinfo_start = '%{Connect-Info}' \
+ WHERE acctsessionid = '%{Acct-Session-Id}' \
+ AND username = '%{SQL-User-Name}' \
+ AND nasipaddress = '%{NAS-IP-Address}'"
+ }
+
+ interim-update {
+ #
+ # Update an existing session and calculate the interval
+ # between the last data we received for the session and this
+ # update. This can be used to find stale sessions.
+ #
+ query = "\
+ UPDATE ${....acct_table1} \
+ SET \
+ acctupdatetime = %{%{integer:Event-Timestamp}:-date('now')}, \
+ acctinterval = 0, \
+ framedipaddress = '%{Framed-IP-Address}', \
+ acctsessiontime = '%{Acct-Session-Time}', \
+ acctinputoctets = %{%{Acct-Input-Gigawords}:-0} \
+ << 32 | %{%{Acct-Input-Octets}:-0}, \
+ acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} \
+ << 32 | %{%{Acct-Output-Octets}:-0} \
+ WHERE acctsessionid = '%{Acct-Session-Id}' \
+ AND username = '%{SQL-User-Name}' \
+ AND nasipaddress = '%{NAS-IP-Address}'"
+
+ #
+ # The update condition matched no existing sessions. Use
+ # the values provided in the update to create a new session.
+ #
+ query = "\
+ INSERT INTO ${....acct_table1} \
+ (${...column_list}) \
+ VALUES \
+ ('%{Acct-Session-Id}', \
+ '%{Acct-Unique-Session-Id}', \
+ '%{SQL-User-Name}', \
+ '%{Realm}', \
+ '%{NAS-IP-Address}', \
+ '%{NAS-Port}', \
+ '%{NAS-Port-Type}', \
+ (%{%{integer:Event-Timestamp}:-strftime('%s', 'now')} - %{%{Acct-Session-Time}:-0}), \
+ %{%{integer:Event-Timestamp}:-date('now')}, \
+ NULL, \
+ '%{Acct-Session-Time}', \
+ '%{Acct-Authentic}', \
+ '%{Connect-Info}', \
+ '', \
+ %{%{Acct-Input-Gigawords}:-0} << 32 | \
+ %{%{Acct-Input-Octets}:-0}, \
+ %{%{Acct-Output-Gigawords}:-0} << 32 | \
+ %{%{Acct-Output-Octets}:-0}, \
+ '%{Called-Station-Id}', \
+ '%{Calling-Station-Id}', \
+ '', \
+ '%{Service-Type}', \
+ '%{Framed-Protocol}', \
+ '%{Framed-IP-Address}')"
+ }
+
+ stop {
+ #
+ # Session has terminated, update the stop time and statistics.
+ #
+ query = "\
+ UPDATE ${....acct_table2} SET \
+ acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, \
+ acctsessiontime = '%{Acct-Session-Time}', \
+ acctinputoctets = %{%{Acct-Input-Gigawords}:-0} \
+ << 32 | %{%{Acct-Input-Octets}:-0}, \
+ acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} \
+ << 32 | %{%{Acct-Output-Octets}:-0}, \
+ acctterminatecause = '%{Acct-Terminate-Cause}', \
+ connectinfo_stop = '%{Connect-Info}' \
+ WHERE acctsessionid = '%{Acct-Session-Id}' \
+ AND username = '%{SQL-User-Name}' \
+ AND nasipaddress = '%{NAS-IP-Address}'"
+
+ #
+ # The update condition matched no existing sessions. Use
+ # the values provided in the update to create a new session.
+ #
+ query = "\
+ INSERT INTO ${....acct_table2} \
+ (${...column_list}) \
+ VALUES \
+ ('%{Acct-Session-Id}', \
+ '%{Acct-Unique-Session-Id}', \
+ '%{SQL-User-Name}', \
+ '%{Realm}', \
+ '%{NAS-IP-Address}', \
+ '%{NAS-Port}', \
+ '%{NAS-Port-Type}', \
+ %{%{integer:Event-Timestamp}:-strftime('%s', 'now')} - %{%{Acct-Session-Time}:-0}), \
+ %{%{integer:Event-Timestamp}:-date('now')}, \
+ %{%{integer:Event-Timestamp}:-date('now')}, \
+ '%{Acct-Session-Time}', \
+ '%{Acct-Authentic}', \
+ '', \
+ '%{Connect-Info}', \
+ %{%{Acct-Input-Gigawords}:-0} << 32 | \
+ %{%{Acct-Input-Octets}:-0}, \
+ %{%{Acct-Output-Gigawords}:-0} << 32 | \
+ %{%{Acct-Output-Octets}:-0}, \
+ '%{Called-Station-Id}', \
+ '%{Calling-Station-Id}', \
+ '%{Acct-Terminate-Cause}', \
+ '%{Service-Type}', \
+ '%{Framed-Protocol}', \
+ '%{Framed-IP-Address}')"
+ }
+ }
+}
+
+#######################################################################
+# Authentication Logging Queries
+#######################################################################
+# postauth_query - Insert some info after authentication
+#######################################################################
+
+post-auth {
+ # Write SQL queries to a logfile. This is potentially useful for bulk inserts
+ # when used with the rlm_sql_null driver.
+# logfile = ${logdir}/post-auth.sql
+
+ query = "\
+ INSERT INTO ${..postauth_table} \
+ (username, pass, reply, authdate) \
+ VALUES ( \
+ '%{SQL-User-Name}', \
+ '%{%{User-Password}:-%{Chap-Password}}', \
+ '%{reply:Packet-Type}', \
+ %{%{integer:Event-Timestamp}:-date('now')})"
+}