# -*- text -*-
#
#  main/mssql/queries.conf -- MSSQL configuration for default schema (schema.sql)
#
#  $Id: 6fcea6edb5998f9f6c302f6246a88cdddf83dbaa $

# Safe characters list for sql queries. Everything else is replaced
# with their mime-encoded equivalents.
# The default list should be ok
#safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"

#######################################################################
#  Query config:  Username
#######################################################################
# This is the username that will get substituted, escaped, and added
# as attribute 'SQL-User-Name'.  '%{SQL-User-Name}' should be used
# below everywhere a username substitution is needed so you you can
# be sure the username passed from the client is escaped properly.
#
# Uncomment the next line, if you want the sql_user_name to mean:
#
#    Use Stripped-User-Name, if it's there.
#    Else use User-Name, if it's there,
#    Else use hard-coded string "none" as the user name.
#sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-none}}"
#
sql_user_name = "%{User-Name}"

#######################################################################
#  Authorization Queries
#######################################################################
#  These queries compare the check items for the user
#  in ${authcheck_table} and setup the reply items in
#  ${authreply_table}.  You can use any query/tables
#  you want, but the return data for each row MUST
#  be in the  following order:
#
#  0. Row ID (currently unused)
#  1. UserName/GroupName
#  2. Item Attr Name
#  3. Item Attr Value
#  4. Item Attr Operation
#######################################################################
# Query for case sensitive usernames was removed. Please contact with me,
# if you know analog of STRCMP functions for MS SQL.

authorize_check_query = "\
	SELECT id, UserName, Attribute, Value, op \
	FROM ${authcheck_table} \
	WHERE Username = '%{SQL-User-Name}' \
	ORDER BY id"

authorize_reply_query = "\
	SELECT id, UserName, Attribute, Value, op \
	FROM ${authreply_table} \
	WHERE Username = '%{SQL-User-Name}' \
	ORDER BY id"

authorize_group_check_query = "\
	SELECT \
		${groupcheck_table}.id,${groupcheck_table}.GroupName, \
		${groupcheck_table}.Attribute,${groupcheck_table}.Value, \
		${groupcheck_table}.op \
	FROM ${groupcheck_table},${usergroup_table} \
	WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' \
	AND ${usergroup_table}.GroupName = ${groupcheck_table}.GroupName \
	ORDER BY ${groupcheck_table}.id"

authorize_group_reply_query = "\
	SELECT \
		${groupreply_table}.id, ${groupreply_table}.GroupName, \
		${groupreply_table}.Attribute,${groupreply_table}.Value, \
		${groupreply_table}.op \
	FROM ${groupreply_table},${usergroup_table} \
	WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' \
	AND ${usergroup_table}.GroupName = ${groupreply_table}.GroupName \
	ORDER BY ${groupreply_table}.id"

group_membership_query = "\
	SELECT groupname \
	FROM ${usergroup_table} \
	WHERE username = '%{SQL-User-Name}' \
	ORDER BY priority"

#######################################################################
# Accounting and Post-Auth Queries
#######################################################################
# These queries insert/update accounting and authentication records.
# The query to use is determined by the value of 'reference'.
# This value is used as a configuration path and should resolve to one
# or more 'query's. If reference points to multiple queries, and a query
# fails, the next query is executed.
#
# Behaviour is identical to the old 1.x/2.x module, except we can now
# fail between N queries, and query selection can be based on any
# combination of attributes, or custom 'Acct-Status-Type' values.
#######################################################################
accounting {
	reference = "%{tolower:type.%{Acct-Status-Type}.query}"

	# Write SQL queries to a logfile. This is potentially useful for bulk inserts
	# when used with the rlm_sql_null driver.
#	logfile = ${logdir}/accounting.sql

	type {
		accounting-on {
			query = "\
				UPDATE ${....acct_table1} \
				SET \
					AcctStopTime='%S', \
					AcctSessionTime=unix_timestamp('%S') - \
						unix_timestamp(AcctStartTime), \
					AcctTerminateCause='%{%{Acct-Terminate-Cause}:-NAS-Reboot}', \
					AcctStopDelay = %{%{Acct-Delay-Time}:-0} \
				WHERE AcctStopTime = 0 \
				AND NASIPAddress = '%{NAS-IP-Address}' \
				AND AcctStartTime <= '%S'"
		}

		accounting-off {
			query = "${..accounting-on.query}"
		}

		start {
			query = "\
				INSERT INTO ${....acct_table1} \
					(AcctSessionId,		AcctUniqueId,		UserName, \
					Realm,			NASIPAddress,		NASPort, \
					NASPortType,		AcctStartTime, 		AcctSessionTime, \
					AcctAuthentic,		ConnectInfo_start,	ConnectInfo_stop, \
					AcctInputOctets,	AcctOutputOctets,	CalledStationId, \
					CallingStationId,	AcctTerminateCause,	ServiceType, \
					FramedProtocol,		FramedIPAddress,	AcctStartDelay, \
					AcctStopDelay,		XAscendSessionSvrKey) \
				VALUES(\
					'%{Acct-Session-Id}', \
					'%{Acct-Unique-Session-Id}', \
					'%{SQL-User-Name}', \
					'%{Realm}', \
					'%{NAS-IP-Address}', \
					'%{NAS-Port-Id}', \
					'%{NAS-Port-Type}', \
					'%S', \
					'0', \
					'%{Acct-Authentic}', \
					'%{Connect-Info}', \
					'', \
					'0', \
					'0', \
					'%{Called-Station-Id}', \
					'%{Calling-Station-Id}', \
					'', \
					'%{Service-Type}', \
					'%{Framed-Protocol}', \
					'%{Framed-IP-Address}', \
					'%{Acct-Delay-Time}', \
					'0', \
					'%{X-Ascend-Session-Svr-Key}')"

			query = "\
				UPDATE ${....acct_table1} \
				SET \
					AcctStartTime = '%S', \
					AcctStartDelay = '%{%{Acct-Delay-Time}:-0}', \
					ConnectInfo_start = '%{Connect-Info}' \
				WHERE AcctSessionId = '%{Acct-Session-Id}' \
				AND UserName = '%{SQL-User-Name}' \
				AND NASIPAddress = '%{NAS-IP-Address}' \
				AND AcctStopTime = 0"
		}

		interim-update {
			query = "\
				UPDATE ${....acct_table1} \
				SET \
					FramedIPAddress = '%{Framed-IP-Address}' \
				WHERE AcctSessionId = '%{Acct-Session-Id}' \
				AND UserName = '%{SQL-User-Name}' \
				AND NASIPAddress= '%{NAS-IP-Address}' \
				AND AcctStopTime = 0"

			query = "\
				INSERT INTO ${....acct_table1} \
					(AcctSessionId,		AcctUniqueId,		UserName, \
					Realm,			NASIPAddress,		NASPort, \
					NASPortType,		AcctSessionTime,	AcctAuthentic, \
					ConnectInfo_start,	AcctInputOctets,	AcctOutputOctets, \
					CalledStationId,	CallingStationId,	ServiceType, \
					FramedProtocol,		FramedIPAddress,	AcctStartDelay, \
					XAscendSessionSvrKey) \
				VALUES(\
					'%{Acct-Session-Id}', \
					'%{Acct-Unique-Session-Id}', \
					'%{SQL-User-Name}', \
					'%{Realm}', \
					'%{NAS-IP-Address}', \
					'%{NAS-Port-Id}', \
					'%{NAS-Port-Type}', \
					'%{Acct-Session-Time}', \
					'%{Acct-Authentic}', \
					'', \
					'%{Acct-Input-Octets}', \
					'%{Acct-Output-Octets}', \
					'%{Called-Station-Id}', \
					'%{Calling-Station-Id}', \
					'%{Service-Type}', \
					'%{Framed-Protocol}', \
					'%{Framed-IP-Address}', \
					'0', \
					'%{X-Ascend-Session-Svr-Key}')"
		}

		stop {
			query = "\
				UPDATE ${....acct_table2} \
				SET \
					AcctStopTime = '%S', \
					AcctSessionTime = '%{Acct-Session-Time}', \
					AcctInputOctets = '%{Acct-Input-Octets}', \
					AcctOutputOctets = '%{Acct-Output-Octets}', \
					AcctTerminateCause = '%{Acct-Terminate-Cause}', \
					AcctStopDelay = '%{%{Acct-Delay-Time}:-0}', \
					ConnectInfo_stop = '%{Connect-Info}' \
				WHERE AcctSessionId = '%{Acct-Session-Id}' \
				AND UserName = '%{SQL-User-Name}' \
				AND NASIPAddress = '%{NAS-IP-Address}' \
				AND AcctStopTime = 0"

			query = "\
				INSERT into ${....acct_table2} \
					(AcctSessionId,		AcctUniqueId,		UserName, \
					Realm,			NASIPAddress,		NASPort, \
					NASPortType,		AcctStopTime,		AcctSessionTime, \
					AcctAuthentic,		ConnectInfo_start,	ConnectInfo_stop, \
					AcctInputOctets,	AcctOutputOctets,	CalledStationId, \
					CallingStationId,	AcctTerminateCause,	ServiceType, \
					FramedProtocol,		FramedIPAddress,	AcctStartDelay, \
					AcctStopDelay) \
				VALUES(\
					'%{Acct-Session-Id}', \
					'%{Acct-Unique-Session-Id}', \
					'%{SQL-User-Name}', \
					'%{Realm}', \
					'%{NAS-IP-Address}', \
					'%{NAS-Port-Id}', \
					'%{NAS-Port-Type}', \
					'%S', \
					'%{Acct-Session-Time}', \
					'%{Acct-Authentic}', \
					'', \
					'%{Connect-Info}', \
					'%{Acct-Input-Octets}', \
					'%{Acct-Output-Octets}', \
					'%{Called-Station-Id}', \
					'%{Calling-Station-Id}', \
					'%{Acct-Terminate-Cause}', \
					'%{Service-Type}', \
					'%{Framed-Protocol}', \
					'%{Framed-IP-Address}', \
					'0', \
					'%{%{Acct-Delay-Time}:-0}')"
		}
	}
}

post-auth {
	# Write SQL queries to a logfile. This is potentially useful for bulk inserts
	# when used with the rlm_sql_null driver.
#	logfile = ${logdir}/post-auth.sql
}