# -*- text -*-
#
#  main/sqlite/queries.conf -- SQLite configuration for default schema (schema.sql)
#
#  Id: e1e83bf94814ed8be6239977b7bacfed21c0cd6a $

# Safe characters list for sql queries. Everything else is replaced
# with their mime-encoded equivalents.
# The default list should be ok
#safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"

#######################################################################
#  Query config:  Username
#######################################################################
# This is the username that will get substituted, escaped, and added
# as attribute 'SQL-User-Name'. '%{SQL-User-Name}' should be used below
# everywhere a username substitution is needed so you you can be sure
# the username passed from the client is escaped properly.
#
# Uncomment the next line, if you want the sql_user_name to mean:
#
#	Use Stripped-User-Name, if it's there.
#	Else use User-Name, if it's there,
#	Else use hard-coded string "DEFAULT" as the user name.
#sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}"
#
sql_user_name = "%{User-Name}"

#######################################################################
# Default profile
#######################################################################
# This is the default profile. It is found in SQL by group membership.
# That means that this profile must be a member of at least one group
# which will contain the corresponding check and reply items.
# This profile will be queried in the authorize section for every user.
# The point is to assign all users a default profile without having to
# manually add each one to a group that will contain the profile.
# The SQL module will also honor the User-Profile attribute. This
# attribute can be set anywhere in the authorize section (ie the users
# file). It is found exactly as the default profile is found.
# If it is set then it will *overwrite* the default profile setting.
# The idea is to select profiles based on checks on the incoming packets,
# not on user group membership. For example:
# -- users file --
# DEFAULT	Service-Type == Outbound-User, User-Profile := "outbound"
# DEFAULT	Service-Type == Framed-User, User-Profile := "framed"
#
# By default the default_user_profile is not set
#
#default_user_profile = "DEFAULT"

#######################################################################
# NAS Query
#######################################################################
# This query retrieves the radius clients
#
# 0. Row ID (currently unused)
# 1. Name (or IP address)
# 2. Shortname
# 3. Type
# 4. Secret
# 5. Server
#######################################################################

client_query = "\
	SELECT id, nasname, shortname, type, secret, server \
	FROM ${client_table}"

#######################################################################
# Authorization Queries
#######################################################################
# These queries compare the check items for the user
# in ${authcheck_table} and setup the reply items in
# ${authreply_table}. You can use any query/tables
# you want, but the return data for each row MUST
# be in the following order:
#
# 0. Row ID (currently unused)
# 1. UserName/GroupName
# 2. Item Attr Name
# 3. Item Attr Value
# 4. Item Attr Operation
#######################################################################

#
#  Use these for case sensitive usernames.
#
#authorize_check_query = "\
#	SELECT id, username, attribute, value, op \
#	FROM ${authcheck_table} \
#	WHERE username = BINARY '%{SQL-User-Name}' \
#	ORDER BY id"

#authorize_reply_query = "\
#	SELECT id, username, attribute, value, op \
#	FROM ${authreply_table} \
#	WHERE username = BINARY '%{SQL-User-Name}' \
#	ORDER BY id"

#
#  The default queries are case insensitive. (for compatibility with older versions of FreeRADIUS)
#
authorize_check_query = "\
	SELECT id, username, attribute, value, op \
	FROM ${authcheck_table} \
	WHERE username = '%{SQL-User-Name}' \
	ORDER BY id"

authorize_reply_query = "\
	SELECT id, username, attribute, value, op \
	FROM ${authreply_table} \
	WHERE username = '%{SQL-User-Name}' \
	ORDER BY id"

#
# Use these for case sensitive usernames.
#
#group_membership_query = "\
#	SELECT groupname \
#	FROM ${usergroup_table} \
#	WHERE username = BINARY '%{SQL-User-Name}' \
#	ORDER BY priority"

group_membership_query = "\
	SELECT groupname \
	FROM ${usergroup_table} \
	WHERE username = '%{SQL-User-Name}' \
	ORDER BY priority"

authorize_group_check_query = "\
	SELECT id, groupname, attribute, \
	Value, op \
	FROM ${groupcheck_table} \
	WHERE groupname = '%{Sql-Group}' \
	ORDER BY id"

authorize_group_reply_query = "\
	SELECT id, groupname, attribute, \
	value, op \
	FROM ${groupreply_table} \
	WHERE groupname = '%{Sql-Group}' \
	ORDER BY id"

#######################################################################
# Simultaneous Use Checking Queries
#######################################################################
# simul_count_query	- query for the number of current connections
#			- If this is not defined, no simultaneouls use checking
#			- will be performed by this module instance
# simul_verify_query	- query to return details of current connections
#				for verification
#			- Leave blank or commented out to disable verification step
#			- Note that the returned field order should not be changed.
#######################################################################

#
#  Uncomment simul_count_query to enable simultaneous use checking
#
#simul_count_query = "\
#	SELECT COUNT(*) \
#	FROM ${acct_table1} \
#	WHERE username = '%{SQL-User-Name}' \
#	AND acctstoptime IS NULL"

simul_verify_query = "\
	SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, \
		callingstationid, framedprotocol \
	FROM ${acct_table1} \
	WHERE username = '%{SQL-User-Name}' \
	AND acctstoptime IS NULL"

#######################################################################
# Accounting and Post-Auth Queries
#######################################################################
# These queries insert/update accounting and authentication records.
# The query to use is determined by the value of 'reference'.
# This value is used as a configuration path and should resolve to one
# or more 'query's. If reference points to multiple queries, and a query
# fails, the next query is executed.
#
# Behaviour is identical to the old 1.x/2.x module, except we can now
# fail between N queries, and query selection can be based on any
# combination of attributes, or custom 'Acct-Status-Type' values.
#######################################################################
accounting {
	reference = "%{tolower:type.%{Acct-Status-Type}.query}"

	# Write SQL queries to a logfile. This is potentially useful for bulk inserts
	# when used with the rlm_sql_null driver.
#	logfile = ${logdir}/accounting.sql

	column_list = "\
		acctsessionid,		acctuniqueid,		username, \
		realm,			nasipaddress,		nasportid, \
		nasporttype,		acctstarttime,		acctupdatetime, \
		acctstoptime,		acctsessiontime, 	acctauthentic, \
		connectinfo_start,	connectinfo_stop, 	acctinputoctets, \
		acctoutputoctets,	calledstationid, 	callingstationid, \
		acctterminatecause,	servicetype,		framedprotocol, \
		framedipaddress"

	type {
		accounting-on {
			#
			#  Bulk terminate all sessions associated with a given NAS
			#
			query = "\
				UPDATE ${....acct_table1} \
				SET \
					acctstoptime = %{%{integer:Event-Timestamp}:-date('now')}, \
					acctsessiontime	= \
						%{%{integer:Event-Timestamp}:-strftime('%s', 'now')} \
						- strftime('%s', acctstarttime)), \
					acctterminatecause = '%{Acct-Terminate-Cause}' \
				WHERE acctstoptime IS NULL \
				AND nasipaddress   = '%{NAS-IP-Address}' \
				AND acctstarttime <= %{integer:Event-Timestamp}"
		}

		accounting-off {
			query = "${..accounting-on.query}"
		}

		start {
			#
			#  Insert a new record into the sessions table
			#
			query = "\
				INSERT INTO ${....acct_table1} \
					(${...column_list}) \
				VALUES \
					('%{Acct-Session-Id}', \
					'%{Acct-Unique-Session-Id}', \
					'%{SQL-User-Name}', \
					'%{Realm}', \
					'%{NAS-IP-Address}', \
					'%{NAS-Port}', \
					'%{NAS-Port-Type}', \
					%{%{integer:Event-Timestamp}:-date('now')}, \
					%{%{integer:Event-Timestamp}:-date('now')}, \
					NULL, \
					'0', \
					'%{Acct-Authentic}', \
					'%{Connect-Info}', \
					'', \
					'0', \
					'0', \
					'%{Called-Station-Id}', \
					'%{Calling-Station-Id}', \
					'', \
					'%{Service-Type}', \
					'%{Framed-Protocol}', \
					'%{Framed-IP-Address}')"

			#
			#  Key constraints prevented us from inserting a new session,
			#  use the alternate query to update an existing session.
			#
			query = "\
				UPDATE ${....acct_table1} SET \
					acctstarttime	= %{%{integer:Event-Timestamp}:-date('now')}, \
					acctupdatetime	= %{%{integer:Event-Timestamp}:-date('now'))}, \
					connectinfo_start = '%{Connect-Info}' \
				WHERE acctsessionid = '%{Acct-Session-Id}' \
				AND username		= '%{SQL-User-Name}' \
				AND nasipaddress	= '%{NAS-IP-Address}'"
		}

		interim-update {
			#
			#  Update an existing session and calculate the interval
			#  between the last data we received for the session and this
			#  update. This can be used to find stale sessions.
			#
			query = "\
				UPDATE ${....acct_table1} \
				SET \
					acctupdatetime  = %{%{integer:Event-Timestamp}:-date('now')}, \
					acctinterval    = 0, \
					framedipaddress = '%{Framed-IP-Address}', \
					acctsessiontime = '%{Acct-Session-Time}', \
					acctinputoctets = %{%{Acct-Input-Gigawords}:-0} \
						<< 32 | %{%{Acct-Input-Octets}:-0}, \
					acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} \
						<< 32 | %{%{Acct-Output-Octets}:-0} \
				WHERE acctsessionid     = '%{Acct-Session-Id}' \
				AND username            = '%{SQL-User-Name}' \
				AND nasipaddress        = '%{NAS-IP-Address}'"

			#
			#  The update condition matched no existing sessions. Use
			#  the values provided in the update to create a new session.
			#
			query = "\
				INSERT INTO ${....acct_table1} \
					(${...column_list}) \
				VALUES \
					('%{Acct-Session-Id}', \
					'%{Acct-Unique-Session-Id}', \
					'%{SQL-User-Name}', \
					'%{Realm}', \
					'%{NAS-IP-Address}', \
					'%{NAS-Port}', \
					'%{NAS-Port-Type}', \
					(%{%{integer:Event-Timestamp}:-strftime('%s', 'now')} - %{%{Acct-Session-Time}:-0}), \
					%{%{integer:Event-Timestamp}:-date('now')}, \
					NULL, \
					'%{Acct-Session-Time}', \
					'%{Acct-Authentic}', \
					'%{Connect-Info}', \
					'', \
					%{%{Acct-Input-Gigawords}:-0} << 32 | \
						%{%{Acct-Input-Octets}:-0}, \
					%{%{Acct-Output-Gigawords}:-0} << 32 | \
						%{%{Acct-Output-Octets}:-0}, \
					'%{Called-Station-Id}', \
					'%{Calling-Station-Id}', \
					'', \
					'%{Service-Type}', \
					'%{Framed-Protocol}', \
					'%{Framed-IP-Address}')"
		}

		stop {
			#
			#  Session has terminated, update the stop time and statistics.
			#
			query = "\
				UPDATE ${....acct_table2} SET \
					acctstoptime	= %{%{integer:Event-Timestamp}:-date('now')}, \
					acctsessiontime	= '%{Acct-Session-Time}', \
					acctinputoctets	= %{%{Acct-Input-Gigawords}:-0} \
						<< 32 | %{%{Acct-Input-Octets}:-0}, \
					acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} \
						<< 32 | %{%{Acct-Output-Octets}:-0}, \
					acctterminatecause = '%{Acct-Terminate-Cause}', \
					connectinfo_stop = '%{Connect-Info}' \
				WHERE acctsessionid 	= '%{Acct-Session-Id}' \
				AND username		= '%{SQL-User-Name}' \
				AND nasipaddress	= '%{NAS-IP-Address}'"

			#
			#  The update condition matched no existing sessions. Use
			#  the values provided in the update to create a new session.
			#
			query = "\
				INSERT INTO ${....acct_table2} \
					(${...column_list}) \
				VALUES \
					('%{Acct-Session-Id}', \
					'%{Acct-Unique-Session-Id}', \
					'%{SQL-User-Name}', \
					'%{Realm}', \
					'%{NAS-IP-Address}', \
					'%{NAS-Port}', \
					'%{NAS-Port-Type}', \
					%{%{integer:Event-Timestamp}:-strftime('%s', 'now')} - %{%{Acct-Session-Time}:-0}), \
					%{%{integer:Event-Timestamp}:-date('now')}, \
					%{%{integer:Event-Timestamp}:-date('now')}, \
					'%{Acct-Session-Time}', \
					'%{Acct-Authentic}', \
					'', \
					'%{Connect-Info}', \
					%{%{Acct-Input-Gigawords}:-0} << 32 | \
						%{%{Acct-Input-Octets}:-0}, \
					%{%{Acct-Output-Gigawords}:-0} << 32 | \
						%{%{Acct-Output-Octets}:-0}, \
					'%{Called-Station-Id}', \
					'%{Calling-Station-Id}', \
					'%{Acct-Terminate-Cause}', \
					'%{Service-Type}', \
					'%{Framed-Protocol}', \
					'%{Framed-IP-Address}')"
		}
	}
}

#######################################################################
# Authentication Logging Queries
#######################################################################
# postauth_query	- Insert some info after authentication
#######################################################################

post-auth {
	# Write SQL queries to a logfile. This is potentially useful for bulk inserts
	# when used with the rlm_sql_null driver.
#	logfile = ${logdir}/post-auth.sql

	query =	"\
		INSERT INTO ${..postauth_table} \
			(username, pass, reply, authdate) \
		VALUES ( \
			'%{SQL-User-Name}', \
			'%{%{User-Password}:-%{Chap-Password}}', \
			'%{reply:Packet-Type}', \
			 %{%{integer:Event-Timestamp}:-date('now')})"
}