Revert "Selected test cases from each of modules for daily Jenkins run , kind of Smoke test for CORD APPS and ONOS using cord-tester. This is done using Robot Framework for better reports."
This reverts commit b5692e703725bc15824f9557d0f03493b7c63054.
Change-Id: I7d88375b4a73eadd721c6bba7ef298c6a1fd5157
diff --git a/src/test/robot/cord.robot b/src/test/robot/cord.robot
index 80a01a4..da58d9c 100644
--- a/src/test/robot/cord.robot
+++ b/src/test/robot/cord.robot
@@ -10,153 +10,27 @@
${rc}= Run Cord Tester dhcp:dhcp_exchange.test_dhcp_1request
Should Be Equal As Integers ${rc} 0
-Verify ONOS DHCP Server Functionality 1
- [Documentation] Make a DHCP release to ONOS to release the dhcp IP
- ${rc}= Run Cord Tester dhcp:dhcp_exchange.test_dhcp_1release
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS DHCP Server Functionality 2
- [Documentation] Make a DHCP request to ONOS to get desired dhcp IP
- ${rc}= Run Cord Tester dhcp:dhcp_exchange.test_dhcp_client_desired_address
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS FLOWS Functionality 1
- [Documentation] Send a Mac flow request to ONOS to verify flow traffic
- ${rc}= Run Cord Tester flows:flows_exchange.test_flow_mac
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS FLOWS Functionality 2
- [Documentation] Send a TCP flow request to ONOS to verify tcp flow traffic
- ${rc}= Run Cord Tester flows:flows_exchange.test_flow_tcp_port
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS FLOWS Functionality 3
- [Documentation] Send a Ipv6 flow request to ONOS to verify Icmpv6 Echo request flow traffic
- ${rc}= Run Cord Tester flows:flows_exchange.test_flow_icmpv6_EchoRequest
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS DHCP Relay Functionality 1
+Verify ONOS DHCP Relay Server Functionality
[Documentation] Make a DHCP request to a relay server through ONOS to get an IP
${rc}= Run Cord Tester dhcprelay:dhcprelay_exchange.test_dhcpRelay_1request
Should Be Equal As Integers ${rc} 0
-Verify ONOS DHCP Relay Functionality 2
- [Documentation] Make a DHCP request to a relay server through ONOS to get an IP
- ${rc}= Run Cord Tester dhcprelay:dhcprelay_exchange.test_dhcpRelay_starvation
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS DHCP Relay Functionality 3
- [Documentation] Make a DHCP request to a relay server through ONOS to get an IP with specifif lease time requested
- ${rc}= Run Cord Tester dhcprelay:dhcprelay_exchange.test_dhcpRelay_specific_lease_packet_in_dhcp_discover
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS DHCP Relay Functionality 4
- [Documentation] Make a DHCP request to a relay server through ONOS to get an IP from out of pool
- ${rc}= Run Cord Tester dhcprelay:dhcprelay_exchange.test_dhcpRelay_client_desired_address_out_of_pool
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS AAA Functionality 1
+Verify Onos AAA Functionality
[Documentation] Make a TLS client request to a RADIUS server through ONOS AAA application
${rc}= Run Cord Tester tls:eap_auth_exchange.test_eap_tls
Should Be Equal As Integers ${rc} 0
-Verify ONOS AAA Functionality 2
- [Documentation] Make a TLS client request to a RADIUS server through ONOS AAA application with invalid certificates
- ${rc}= Run Cord Tester tls:eap_auth_exchange.test_eap_tls_with_invalid_cert
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS AAA Functionality 3
- [Documentation] Make a TLS client request to a RADIUS server through ONOS AAA application without sending client hello packet
- ${rc}= Run Cord Tester tls:eap_auth_exchange.test_eap_tls_without_sending_client_hello
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS AAA Functionality 4
- [Documentation] Make a TLS client request to a RADIUS server through ONOS AAA application with disabling and re-enabling the app
- ${rc}= Run Cord Tester tls:eap_auth_exchange.test_eap_tls_aaa_app_deactivate
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS AAA Functionality 5
- [Documentation] Make a TLS client request to a RADIUS server through ONOS AAA application with cleintkeyex replace with serverkeyex
- ${rc}= Run Cord Tester tls:eap_auth_exchange.test_eap_tls_clientkeyex_replace_with_serverkeyex
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS IGMP Functionality 1
+Verify Onos IGMP Functionality
[Documentation] Make a IGMP join leave request through ONOS IGMP snooping application
${rc}= Run Cord Tester igmp:igmp_exchange.test_igmp_join_verify_traffic
Should Be Equal As Integers ${rc} 0
-Verify ONOS IGMP Functionality 2
- [Documentation] Test for igmp query packet from ONOS igmpsnooping application
- ${rc}= Run Cord Tester igmp:igmp_exchange.test_igmp_query
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS IGMP Functionality 3
- [Documentation] Test for igmp allow new source record type functionilty of ONOS igmpsnooping application
- ${rc}= Run Cord Tester igmp:igmp_exchange.test_igmp_allow_new_source_mode
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS IGMP Functionality 4
- [Documentation] Test for ONOS igmpsnooping functionality with app disable and re-enable
- ${rc}= Run Cord Tester igmp:igmp_exchange.test_igmp_toggling_app_activation
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS IGMP Functionality 5
- [Documentation] Test for ONOS igmpsnooping functionality by sending igmp data traffic without sending join
- ${rc}= Run Cord Tester igmp:igmp_exchange.test_igmp_traffic_verification_for_registered_group_with_no_join_sent
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS CORDd SUBSCRIBER Functionality 1
+Verify Cord SUBSCRIBER Functionality
[Documentation] Simulate Channel Surfing experience
${rc}= Run Cord Tester cordSubscriber:subscriber_exchange.test_cord_subscriber_join_jump
Should Be Equal As Integers ${rc} 0
-Verify ONOS CORD SUBSCRIBER Functionality 2
- [Documentation] Simulate Cord subscriber join channel change
- ${rc}= Run Cord Tester cordSubscriber:subscriber_exchange.test_cord_subscriber_join_next
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS CORD SUBSCRIBER Functionality 3
- [Documentation] Simulate Cord Subscriber Channel surfing for authentication with dhcp client rebind
- ${rc}= Run Cord Tester cordSubscriber:subscriber_exchange.test_cord_subscriber_authentication_with_dhcp_client_rebind_and_channel_surfing
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS CORD SUBSCRIBER Functionality 4
- [Documentation] Simulate Cord Subscriber Authentication with and without certificates and channel surfing
- ${rc}= Run Cord Tester cordSubscriber:subscriber_exchange.test_2_cord_subscribers_authentication_with_valid_and_no_certificates_and_channel_surfing
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS VROUTER Functionality 1
+Verify Cord VROUTER Functionality
[Documentation] Start Quagga container, connect it to ONOS before validating ONOS routing works
${rc}= Run Cord Tester vrouter:vrouter_exchange.test_vrouter_with_5_routes
Should Be Equal As Integers ${rc} 0
-
-Verify ONOS VROUTER Functionality 2
- [Documentation] Start Quagga container, connect it to ONOS before validating ONOS routing works
- ${rc}= Run Cord Tester vrouter:vrouter_exchange.test_vrouter_with_6_routes_3_peers
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS VROUTER Functionality 3
- [Documentation] To verify vrouter functionality with dynamic addition or deletion of routes
- ${rc}= Run Cord Tester vrouter:vrouter_exchange.test_vrouter_deleting_and_adding_routes_in_routing_table
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS VROUTER Functionality 4
- [Documentation] To verify vrouter functionality for classB duplicate route update
- ${rc}= Run Cord Tester vrouter:vrouter_exchange.test_vrouter_with_classB_duplicate_route_update
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS PROXY-ARP Functionality 1
- [Documentation] Create a host in different subnet and arp to the host IP to test ONOS proxy-arp app
- ${rc}= Run Cord Tester proxyarp:proxyarp_exchange.test_proxyarp_with_1_host
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS PROXY-ARP Functionality 2
- [Documentation] Test ONOS proxyarp app with disable and re-enable the app
- ${rc}= Run Cord Tester proxyarp:proxyarp_exchange.test_proxyarp_app_with_disabling_and_re_enabling
- Should Be Equal As Integers ${rc} 0
-
-Verify ONOS PROXY-ARP Functionality 3
- [Documentation] Test ONOS proxyarp functionality with multiple hosts
- ${rc}= Run Cord Tester proxyarp:proxyarp_exchange.test_proxyarp_concurrent_requests_with_multiple_host_and_different_interfaces
- Should Be Equal As Integers ${rc} 0
-