adding node to allapi jenkins file
Change-Id: I60217343b8ac03f202b68bbc4ab5b6ea584e4933
diff --git a/Jenkinsfile/all-xos-api-tests-JenkinsFile b/Jenkinsfile/all-xos-api-tests-JenkinsFile
index 192d194..51b6795 100644
--- a/Jenkinsfile/all-xos-api-tests-JenkinsFile
+++ b/Jenkinsfile/all-xos-api-tests-JenkinsFile
@@ -1,75 +1,62 @@
+// Copyright 2017-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+
PROFILE="null"
CORE_CONTAINER="null"
-
-stage('Config') {
- sh """
- sudo rm -rf ~/cord/
- sudo rm -rf ~/cord_profile
- sudo rm -rf /opt/cord
- sudo rm -rf /opt/cord_profile
- sudo rm -rf /opt/credentials
- sudo rm -rf /opt/images
- sudo rm -rf /opt/pki
- sudo rm -rf ~/.repo/
- mkdir ~/cord && cd ~/cord/
- repo init -u https://gerrit.opencord.org/manifest -b $GERRIT_BRANCH
- repo sync
- repo download $GERRIT_PROJECT $GERRIT_CHANGE_NUMBER/$GERRIT_PATCHSET_NUMBER
- """
-}
-try {
- stage('Build') {
+node ('ubuntu16.04-basebuild-1c-2g') {
+ stage('Config') {
sh """
- if [ '$GERRIT_PROJECT' = 'rcord' ] || [ '$GERRIT_PROJECT' = 'vrouter' ] || [ '$GERRIT_PROJECT' = 'vsg' ] || [ '$GERRIT_PROJECT' = 'vtn' ] || [ '$GERRIT_PROJECT' = 'vtr' ] || [ '$GERRIT_PROJECT' = 'fabric' ] || [ '$GERRIT_PROJECT' = 'openstack' ] || [ '$GERRIT_PROJECT' = 'chameleon' ] || [ '$GERRIT_PROJECT' = 'exampleservice' ] || [ '$GERRIT_PROJECT' = 'onos-service' ] || [ '$GERRIT_PROJECT' = 'olt-service' ]; then
- PROFILE=rcord-local.yml
- fi
- if [ '$GERRIT_PROJECT' = 'ecord' ] || [ '$GERRIT_PROJECT' = 'vEE' ] || [ '$GERRIT_PROJECT' = 'vEG' ]; then
- PROFILE=ecord-local.yml
- fi
- if [ '$GERRIT_PROJECT' = 'mcord' ] || [ '$GERRIT_PROJECT' = 'vspgwu' ] || [ '$GERRIT_PROJECT' = 'venb' ] || [ '$GERRIT_PROJECT' = 'vspgwc' ] || [ '$GERRIT_PROJECT' = 'vEPC' ]; then
- PROFILE=mcord-ng40-local.yml
- fi
- if [ '$GERRIT_PROJECT' = 'vMME' ] || [ '$GERRIT_PROJECT' = 'vHSS' ]; then
- PROFILE=mcord-cavium-local.yml
- fi
- cd ~/cord/build/
- make PODCONFIG=\$PROFILE config
- make -j4 build
+ sudo rm -rf ~/cord/
+ sudo rm -rf ~/cord_profile
+ sudo rm -rf /opt/cord
+ sudo rm -rf /opt/cord_profile
+ sudo rm -rf /opt/credentials
+ sudo rm -rf /opt/images
+ sudo rm -rf /opt/pki
+ sudo rm -rf ~/.repo/
+ mkdir ~/cord && cd ~/cord/
+ repo init -u https://gerrit.opencord.org/manifest -b $GERRIT_BRANCH
+ repo sync
+ repo download $GERRIT_PROJECT $GERRIT_CHANGE_NUMBER/$GERRIT_PATCHSET_NUMBER
"""
}
- stage('Setup') {
- try {
+ try {
+ stage('Build') {
sh """
- if [ '$GERRIT_PROJECT' = 'rcord' ] || [ '$GERRIT_PROJECT' = 'vrouter' ] || [ '$GERRIT_PROJECT' = 'vsg' ] || [ '$GERRIT_PROJECT' = 'vtn' ] || [ '$GERRIT_PROJECT' = 'vtr' ] || [ '$GERRIT_PROJECT' = 'fabric' ] || [ '$GERRIT_PROJECT' = 'openstack' ] || [ '$GERRIT_PROJECT' = 'chameleon' ] || [ '$GERRIT_PROJECT' = 'exampleservice' ] || [ '$GERRIT_PROJECT' = 'onos-service' ] || [ '$GERRIT_PROJECT' = 'olt-service' ]; then
- CORE_CONTAINER=rcord_xos_core_1
- fi
- if [ '$GERRIT_PROJECT' = 'ecord' ] || [ '$GERRIT_PROJECT' = 'vEE' ] || [ '$GERRIT_PROJECT' = 'vEG' ]; then
- CORE_CONTAINER=ecord_xos_core_1
- fi
- if [ '$GERRIT_PROJECT' = 'mcord' ] || [ '$GERRIT_PROJECT' = 'vspgwu' ] || [ '$GERRIT_PROJECT' = 'venb' ] || [ '$GERRIT_PROJECT' = 'vspgwc' ] || [ '$GERRIT_PROJECT' = 'vEPC' ]; then
- CORE_CONTAINER=mcordng40_xos_core_1
- fi
- if [ '$GERRIT_PROJECT' = 'vMME' ] || [ '$GERRIT_PROJECT' = 'vHSS' ]; then
- CORE_CONTAINER=mcordcavium_xos_core_1
- fi
- cd ~/cord/test/cord-tester/src/test/cord-api/Properties/
- sed -i \"s/^\\(SERVER_IP = \\).*/\\1\'127.0.0.1\'/\" RestApiProperties.py
- sed -i \"s/^\\(SERVER_PORT = \\).*/\\1\'9101\'/\" RestApiProperties.py
- sed -i \"s/^\\(PASSWD = \\).*/\\1\'\$(cat ~/cord/build/platform-install/credentials/xosadmin@opencord.org)\'/\" RestApiProperties.py
- docker cp ~/cord/test/cord-tester/src/test/cord-api/Tests/targets/xosapitests.xtarget \$CORE_CONTAINER:/opt/xos/lib/xos-genx/xosgenx/targets/xosapitests.xtarget
- docker exec -i \$CORE_CONTAINER /bin/bash -c "xosgenx --target /opt/xos/lib/xos-genx/xosgenx/targets/./xosapitests.xtarget /opt/xos/core/models/core.xproto" > ~/cord/test/cord-tester/src/test/cord-api/Tests/XOSCoreAPITests.robot
- SERVICES=\$(docker exec -i \$CORE_CONTAINER /bin/bash -c "cd /opt/xos/dynamic_services/;find -name '*.xproto'" | awk -F[//] '{print \$2}')
- export testname=_service_api.robot
- for i in \$SERVICES; do bash -c "docker exec -i \$CORE_CONTAINER /bin/bash -c 'xosgenx --target /opt/xos/lib/xos-genx/xosgenx/targets/./xosapitests.xtarget /opt/xos/dynamic_services/\$i/\$i.xproto'" > ~/cord/test/cord-tester/src/test/cord-api/Tests/\$i\$testname; done
- """
+ if [ '$GERRIT_PROJECT' = 'rcord' ] || [ '$GERRIT_PROJECT' = 'vrouter' ] || [ '$GERRIT_PROJECT' = 'vsg' ] || [ '$GERRIT_PROJECT' = 'vtn' ] || [ '$GERRIT_PROJECT' = 'vtr' ] || [ '$GERRIT_PROJECT' = 'fabric' ] || [ '$GERRIT_PROJECT' = 'openstack' ] || [ '$GERRIT_PROJECT' = 'chameleon' ] || [ '$GERRIT_PROJECT' = 'exampleservice' ] || [ '$GERRIT_PROJECT' = 'onos-service' ] || [ '$GERRIT_PROJECT' = 'olt-service' ] || [ '$GERRIT_PROJECT' = 'cord-tester' ]; then
+ PROFILE=rcord-local.yml
+ fi
+ if [ '$GERRIT_PROJECT' = 'ecord' ] || [ '$GERRIT_PROJECT' = 'vEE' ] || [ '$GERRIT_PROJECT' = 'vEG' ]; then
+ PROFILE=ecord-local.yml
+ fi
+ if [ '$GERRIT_PROJECT' = 'mcord' ] || [ '$GERRIT_PROJECT' = 'vspgwu' ] || [ '$GERRIT_PROJECT' = 'venb' ] || [ '$GERRIT_PROJECT' = 'vspgwc' ] || [ '$GERRIT_PROJECT' = 'vEPC' ]; then
+ PROFILE=mcord-ng40-local.yml
+ fi
+ if [ '$GERRIT_PROJECT' = 'vMME' ] || [ '$GERRIT_PROJECT' = 'vHSS' ]; then
+ PROFILE=mcord-cavium-local.yml
+ fi
+ cd ~/cord/build/
+ make PODCONFIG=\$PROFILE config
+ make -j4 build
+ """
}
- catch(error) { currentBuild.result = 'FAILURE' }
- }
- stage('Test') {
- try {
- sh """
- if [ '$GERRIT_PROJECT' = 'rcord' ] || [ '$GERRIT_PROJECT' = 'vrouter' ] || [ '$GERRIT_PROJECT' = 'vsg' ] || [ '$GERRIT_PROJECT' = 'vtn' ] || [ '$GERRIT_PROJECT' = 'vtr' ] || [ '$GERRIT_PROJECT' = 'fabric' ] || [ '$GERRIT_PROJECT' = 'openstack' ] || [ '$GERRIT_PROJECT' = 'chameleon' ] || [ '$GERRIT_PROJECT' = 'exampleservice' ] || [ '$GERRIT_PROJECT' = 'onos-service' ] || [ '$GERRIT_PROJECT' = 'olt-service' ]; then
+ stage('Setup') {
+ try {
+ sh """
+ if [ '$GERRIT_PROJECT' = 'rcord' ] || [ '$GERRIT_PROJECT' = 'vrouter' ] || [ '$GERRIT_PROJECT' = 'vsg' ] || [ '$GERRIT_PROJECT' = 'vtn' ] || [ '$GERRIT_PROJECT' = 'vtr' ] || [ '$GERRIT_PROJECT' = 'fabric' ] || [ '$GERRIT_PROJECT' = 'openstack' ] || [ '$GERRIT_PROJECT' = 'chameleon' ] || [ '$GERRIT_PROJECT' = 'exampleservice' ] || [ '$GERRIT_PROJECT' = 'onos-service' ] || [ '$GERRIT_PROJECT' = 'olt-service' ] || [ '$GERRIT_PROJECT' = 'cord-tester' ]; then
CORE_CONTAINER=rcord_xos_core_1
fi
if [ '$GERRIT_PROJECT' = 'ecord' ] || [ '$GERRIT_PROJECT' = 'vEE' ] || [ '$GERRIT_PROJECT' = 'vEG' ]; then
@@ -81,43 +68,72 @@
if [ '$GERRIT_PROJECT' = 'vMME' ] || [ '$GERRIT_PROJECT' = 'vHSS' ]; then
CORE_CONTAINER=mcordcavium_xos_core_1
fi
- cd ~/cord/test/cord-tester/src/test/cord-api/Tests
- export testname=_service_api.robot
- SERVICES=\$(docker exec -i \$CORE_CONTAINER /bin/bash -c "cd /opt/xos/dynamic_services/;find -name '*.xproto'" | awk -F[//] '{print \$2}')
- echo \$SERVICES
- pybot -d Log -T -e TenantWithContainer -e Port -e ControllerImages -e ControllerNetwork -e ControllerSlice XOSCoreAPITests.robot || true
- for i in \$SERVICES; do bash -c "pybot -d Log -T -e AddressManagerServiceInstance -v xos_service:\$i \$i\$testname"; done || true
- """
- }
- catch(error) { currentBuild.result = 'FAILURE' }
- }
- stage('Publish') {
- try {
- sh """
- if [ -d RobotLogs ]; then rm -r RobotLogs; fi; mkdir RobotLogs
- cp -r ~/cord/test/cord-tester/src/test/cord-api/Tests/Log/*ml ./RobotLogs
+ cd ~/cord/test/cord-tester/src/test/cord-api/Properties/
+ sed -i \"s/^\\(SERVER_IP = \\).*/\\1\'127.0.0.1\'/\" RestApiProperties.py
+ sed -i \"s/^\\(SERVER_PORT = \\).*/\\1\'9101\'/\" RestApiProperties.py
+ sed -i \"s/^\\(PASSWD = \\).*/\\1\'\$(cat ~/cord/build/platform-install/credentials/xosadmin@opencord.org)\'/\" RestApiProperties.py
+ docker cp ~/cord/test/cord-tester/src/test/cord-api/Tests/targets/xosapitests.xtarget \$CORE_CONTAINER:/opt/xos/lib/xos-genx/xosgenx/targets/xosapitests.xtarget
+ docker exec -i \$CORE_CONTAINER /bin/bash -c "xosgenx --target /opt/xos/lib/xos-genx/xosgenx/targets/./xosapitests.xtarget /opt/xos/core/models/core.xproto" > ~/cord/test/cord-tester/src/test/cord-api/Tests/XOSCoreAPITests.robot
+ SERVICES=\$(docker exec -i \$CORE_CONTAINER /bin/bash -c "cd /opt/xos/dynamic_services/;find -name '*.xproto'" | awk -F[//] '{print \$2}')
+ export testname=_service_api.robot
+ for i in \$SERVICES; do bash -c "docker exec -i \$CORE_CONTAINER /bin/bash -c 'xosgenx --target /opt/xos/lib/xos-genx/xosgenx/targets/./xosapitests.xtarget /opt/xos/dynamic_services/\$i/\$i.xproto'" > ~/cord/test/cord-tester/src/test/cord-api/Tests/\$i\$testname; done
"""
- step([$class: 'RobotPublisher',
- disableArchiveOutput: false,
- logFileName: 'RobotLogs/log*.html',
- otherFiles: '',
- outputFileName: 'RobotLogs/output*.xml',
- outputPath: '.',
- passThreshold: 100,
- reportFileName: 'RobotLogs/report*.html',
- unstableThreshold: 0]);
- }catch(error) {}
+ }
+ catch(error) { currentBuild.result = 'FAILURE' }
+ }
+ stage('Test') {
+ try {
+ sh """
+ if [ '$GERRIT_PROJECT' = 'rcord' ] || [ '$GERRIT_PROJECT' = 'vrouter' ] || [ '$GERRIT_PROJECT' = 'vsg' ] || [ '$GERRIT_PROJECT' = 'vtn' ] || [ '$GERRIT_PROJECT' = 'vtr' ] || [ '$GERRIT_PROJECT' = 'fabric' ] || [ '$GERRIT_PROJECT' = 'openstack' ] || [ '$GERRIT_PROJECT' = 'chameleon' ] || [ '$GERRIT_PROJECT' = 'exampleservice' ] || [ '$GERRIT_PROJECT' = 'onos-service' ] || [ '$GERRIT_PROJECT' = 'olt-service' ] || [ '$GERRIT_PROJECT' = 'cord-tester' ]; then
+ CORE_CONTAINER=rcord_xos_core_1
+ fi
+ if [ '$GERRIT_PROJECT' = 'ecord' ] || [ '$GERRIT_PROJECT' = 'vEE' ] || [ '$GERRIT_PROJECT' = 'vEG' ]; then
+ CORE_CONTAINER=ecord_xos_core_1
+ fi
+ if [ '$GERRIT_PROJECT' = 'mcord' ] || [ '$GERRIT_PROJECT' = 'vspgwu' ] || [ '$GERRIT_PROJECT' = 'venb' ] || [ '$GERRIT_PROJECT' = 'vspgwc' ] || [ '$GERRIT_PROJECT' = 'vEPC' ]; then
+ CORE_CONTAINER=mcordng40_xos_core_1
+ fi
+ if [ '$GERRIT_PROJECT' = 'vMME' ] || [ '$GERRIT_PROJECT' = 'vHSS' ]; then
+ CORE_CONTAINER=mcordcavium_xos_core_1
+ fi
+ cd ~/cord/test/cord-tester/src/test/cord-api/Tests
+ export testname=_service_api.robot
+ SERVICES=\$(docker exec -i \$CORE_CONTAINER /bin/bash -c "cd /opt/xos/dynamic_services/;find -name '*.xproto'" | awk -F[//] '{print \$2}')
+ echo \$SERVICES
+ pybot -d Log -T -e TenantWithContainer -e Port -e ControllerImages -e ControllerNetwork -e ControllerSlice XOSCoreAPITests.robot || true
+ for i in \$SERVICES; do bash -c "pybot -d Log -T -e AddressManagerServiceInstance -v xos_service:\$i \$i\$testname"; done || true
+ """
+ }
+ catch(error) { currentBuild.result = 'FAILURE' }
+ }
+ stage('Publish') {
+ try {
+ sh """
+ if [ -d RobotLogs ]; then rm -r RobotLogs; fi; mkdir RobotLogs
+ cp -r ~/cord/test/cord-tester/src/test/cord-api/Tests/Log/*ml ./RobotLogs
+ """
+ step([$class: 'RobotPublisher',
+ disableArchiveOutput: false,
+ logFileName: 'RobotLogs/log*.html',
+ otherFiles: '',
+ outputFileName: 'RobotLogs/output*.xml',
+ outputPath: '.',
+ passThreshold: 100,
+ reportFileName: 'RobotLogs/report*.html',
+ unstableThreshold: 0]);
+ }catch(error) {}
+ }
}
-}
-finally {
- stage('Cleanup') {
- sh """
- cd /home/sdn/cord/build/
- make PODCONFIG=\$PROFILE config
- make xos-teardown
- make clean-local
- docker images
- """
+ finally {
+ stage('Cleanup') {
+ sh """
+ cd /home/sdn/cord/build/
+ make PODCONFIG=\$PROFILE config
+ make xos-teardown
+ make clean-local
+ docker images
+ """
+ }
+ step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${RECIPIENTS}", sendToIndividuals: false])
}
- step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${RECIPIENTS}", sendToIndividuals: false])
-}
+}
\ No newline at end of file