Add stuffs to provision quagga in cord-tester
diff --git a/src/test/setup/quagga-config/bgpd.conf b/src/test/setup/quagga-config/bgpd.conf
new file mode 100644
index 0000000..e543ff4
--- /dev/null
+++ b/src/test/setup/quagga-config/bgpd.conf
@@ -0,0 +1,8 @@
+hostname bgpd
+password zebra
+router bgp 1000
+bgp router-id 10.10.0.1
+neighbor 10.10.0.19 remote-as 1019
+neighbor 10.10.0.19 advertisement-interval 1
+neighbor 10.10.0.19 route-server-client
+neighbor 10.10.0.19 timers 30 90
\ No newline at end of file
diff --git a/src/test/setup/quagga-config/start.sh b/src/test/setup/quagga-config/start.sh
new file mode 100755
index 0000000..5b140ca
--- /dev/null
+++ b/src/test/setup/quagga-config/start.sh
@@ -0,0 +1,5 @@
+#!/bin/bash
+ulimit -n 65536
+ip a add 10.10.0.3/16 dev eth1
+#bgpd -u root -f /root/config/bgpd.conf &
+/usr/local/sbin/zebra -u root -f /root/config/testrib.conf
diff --git a/src/test/setup/quagga-config/testrib.conf b/src/test/setup/quagga-config/testrib.conf
new file mode 100644
index 0000000..96c2b85
--- /dev/null
+++ b/src/test/setup/quagga-config/testrib.conf
@@ -0,0 +1,54 @@
+!
+! Zebra configuration saved from vty
+! 2007/04/01 17:46:48
+!
+password zebra
+log stdout
+service advanced-vty
+!
+debug zebra rib
+debug zebra kernel
+debug zebra fpm
+!
+!interface eth1
+! ip address 10.10.0.1/16
+
+! statics that should be subsumed by connected routes, according to interface
+! state
+ip route 50.10.0.0/24 172.17.0.4
+ip route 50.10.0.0/24 172.17.0.3
+ip route 50.10.0.0/24 172.17.0.2
+ip route 60.10.0.0/24 172.17.0.4
+ip route 60.10.0.0/24 172.17.0.3
+ip route 70.10.0.0/24 172.17.0.4
+ip route 70.10.0.0/24 172.17.0.3
+ip route 80.10.0.0/24 172.17.0.4
+ip route 80.10.0.0/24 172.17.0.3
+ip route 90.10.0.0/24 172.17.0.4
+ip route 90.10.0.0/24 172.17.0.3
+ip route 100.10.0.0/24 172.17.0.4
+ip route 100.10.0.0/24 172.17.0.3
+ip route 120.10.0.0/24 172.17.0.4
+ip route 120.10.0.0/24 172.17.0.3
+ip route 10.10.0.19/24 172.17.0.5
+ip route 10.10.0.19/24 172.17.0.4
+ip route 10.10.0.19/24 172.17.0.3
+ip route 50.10.0.0/24 172.17.0.6
+ip route 50.10.0.0/24 172.17.0.3
+ip route 50.10.0.0/24 172.17.0.2
+ip route 50.10.0.0/24 172.17.0.4
+ip route 60.10.0.0/24 172.17.0.7
+ip route 60.10.0.0/24 172.17.0.3
+ip route 60.10.0.0/24 172.17.0.4
+ip route 70.10.0.0/24 172.17.0.1
+ip route 70.10.0.0/24 172.17.0.3
+ip route 70.10.0.0/24 172.17.0.2
+ip route 80.10.0.0/24 172.17.0.2
+ip route 80.10.0.0/24 172.17.0.3
+ip route 80.10.0.0/24 172.17.0.4
+ip route 90.10.0.0/24 172.17.0.3
+ip route 90.10.0.0/24 172.17.0.2
+ip route 90.10.0.0/24 172.17.0.4
+line vty
+ exec-timeout 0 0
+!