splitting attworkflow jenkins files to build/test
Change-Id: Ied3d02116f1f94995848b3037c4fb4f809f83b9f
diff --git a/Jenkinsfile-attworkflow-build b/Jenkinsfile-attworkflow-build
new file mode 100644
index 0000000..6bdb2d6
--- /dev/null
+++ b/Jenkinsfile-attworkflow-build
@@ -0,0 +1,276 @@
+// Copyright 2017-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+node ("${TestNodeName}") {
+ timeout (100) {
+ try {
+ stage ("Parse deployment configuration file") {
+ sh returnStdout: true, script: "rm -rf ${configBaseDir}"
+ sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
+ deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yml"
+ }
+ stage('Clean up') {
+ timeout(10) {
+ sh returnStdout: true, script: """
+ rm -rf helm-charts cord-tester
+ git clone -b ${branch} ${cordRepoUrl}/helm-charts
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ for hchart in \$(helm list -q | grep -E -v 'docker-registry|mavenrepo|ponnet');
+ do
+ echo "Purging chart: \${hchart}"
+ helm delete --purge "\${hchart}"
+ done
+ """
+ timeout(5) {
+ waitUntil {
+ helm_deleted = sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ helm ls -q | grep -E -v 'docker-registry|mavenrepo|ponnet' | wc -l
+ """
+ return helm_deleted.toInteger() == 0
+ }
+ }
+ timeout(5) {
+ waitUntil {
+ kubectl_deleted = sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ kubectl get pods --all-namespaces --no-headers | grep -E -v 'kube-system|docker-registry|mavenrepo|ponnet' | wc -l
+ """
+ return kubectl_deleted.toInteger() == 0
+ }
+ }
+ }
+ }
+ dir ("helm-charts") {
+ stage('Install Voltha Kafka') {
+ timeout(10) {
+ sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ helm install --name voltha-kafka --set replicas=1 --set persistence.enabled=false --set zookeeper.replicaCount=1 --set zookeeper.persistence.enabled=false incubator/kafka
+ """
+ }
+ timeout(10) {
+ waitUntil {
+ kafka_instances_running = sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ kubectl get pods | grep voltha-kafka | grep -i running | grep 1/1 | wc -l
+ """
+ return kafka_instances_running.toInteger() == 2
+ }
+ }
+ }
+ stage('Install voltha') {
+ timeout(10) {
+ sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com/
+ helm dep build voltha
+ helm install -n voltha -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --set etcd-operator.customResources.createEtcdClusterCRD=false voltha
+ helm upgrade -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --set etcd-operator.customResources.createEtcdClusterCRD=true voltha ./voltha
+ """
+ }
+ timeout(10) {
+ waitUntil {
+ voltha_completed = sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ kubectl get pods -n voltha | grep -i running | grep 1/1 | wc -l
+ """
+ return voltha_completed.toInteger() == 8
+ }
+ }
+ }
+ stage('Install CORD Kafka') {
+ timeout(10) {
+ sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ helm install --name cord-kafka --set replicas=1 --set persistence.enabled=false --set zookeeper.replicaCount=1 --set zookeeper.persistence.enabled=false incubator/kafka
+ """
+ }
+ timeout(10) {
+ waitUntil {
+ kafka_instances_running = sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ kubectl get pods | grep cord-kafka | grep -i running | grep 1/1 | wc -l
+ """
+ return kafka_instances_running.toInteger() == 2
+ }
+ }
+ }
+ stage('Install ONOS') {
+ timeout(10) {
+ sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ helm install -n onos -f configs/onos.yaml -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml onos
+ """
+ }
+ timeout(10) {
+ waitUntil {
+ onos_completed = sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ kubectl get pods | grep -i onos | grep -i running | grep 1/1 | wc -l
+ """
+ return onos_completed.toInteger() == 1
+ }
+ }
+ }
+ stage('Install xos-core') {
+ timeout(10) {
+ sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ helm dep update xos-core
+ helm install -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n xos-core xos-core
+ """
+ }
+ timeout(10) {
+ waitUntil {
+ xos_core_completed = sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ kubectl get pods | grep -i xos | grep -i running | grep 1/1 | wc -l
+ """
+ return xos_core_completed.toInteger() == 7
+ }
+ }
+ }
+ stage('Install att-workflow') {
+ timeout(10) {
+ sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ helm dep update xos-profiles/att-workflow
+ helm install -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n att-workflow xos-profiles/att-workflow
+ """
+ }
+ timeout(10) {
+ waitUntil {
+ att_workflow_tosca_completed = sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ kubectl get pods | grep -i att-workflow-tosca-loader | grep -i completed | wc -l
+ """
+ return att_workflow_tosca_completed.toInteger() == 1
+ }
+ }
+ }
+ stage('Install base-kubernetes') {
+ timeout(10) {
+ sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+ helm dep update xos-profiles/base-kubernetes
+ helm install -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n base-kubernetes xos-profiles/base-kubernetes
+ """
+ }
+ timeout(10) {
+ waitUntil {
+ base_kubernetes_tosca_running = sh returnStdout: true, script: """
+ export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+ kubectl get pods | grep -i base-kubernetes-tosca-loader | grep -i completed | wc -l
+ """
+ return base_kubernetes_tosca_running.toInteger() == 1
+ }
+ }
+ }
+ }
+ stage('Reinstall OLT software') {
+ for(int i=0; i < deployment_config.olts.size(); i++) {
+ sh returnStdout: true, script: """
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'
+ """
+ timeout(5) {
+ waitUntil {
+ olt_sw_present = sh returnStdout: true, script: """
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l'
+ """
+ return olt_sw_present.toInteger() == 0
+ }
+ }
+ sh returnStdout: true, script: """
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} "dpkg --install ${oltDebVersion}"
+ """
+ timeout(5) {
+ waitUntil {
+ olt_sw_present = sh returnStdout: true, script: """
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l'
+ """
+ return olt_sw_present.toInteger() == 1
+ }
+ }
+ // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
+ if ("${deployment_config.olts[i].fortygig}" != null && "${deployment_config.olts[i].fortygig}" == 'true') {
+ sh returnStdout: true, script: """
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'echo "port ce128 sp=40000" >> /broadcom/qax.soc'
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '/opt/bcm68620/svk_init.sh'
+ """
+ }
+ }
+ }
+ stage('Restart OLT processes') {
+ for(int i=0; i < deployment_config.olts.size(); i++) {
+ timeout(5) {
+ sh returnStdout: true, script: """
+ ssh-keyscan -H ${deployment_config.olts[i].ip} >> ~/.ssh/known_hosts
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service bal_core_dist stop' || true
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service openolt stop' || true
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /var/log/bal_core_dist.log'
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /var/log/openolt.log'
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service bal_core_dist start &'
+ sleep 5
+ sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'service openolt start &'
+ """
+ }
+ timeout(15) {
+ waitUntil {
+ onu_discovered = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cat /var/log/openolt.log | grep \"oper_state:up\" | wc -l'"
+ return onu_discovered.toInteger() > 0
+ }
+ }
+ }
+ }
+ dir ("${configBaseDir}/${configToscaDir}/attworkflow-configs") {
+ stage('Configure R-CORD - Fabric and whitelist') {
+ timeout(1) {
+ waitUntil {
+ out_fabric = sh returnStdout: true, script: """
+ curl -s -H "xos-username: admin@opencord.org" -H "xos-password: letmein" -X POST --data-binary @${configFileName}-fabric.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
+ """
+ return out_fabric.toInteger() == 1
+ }
+ }
+ }
+ stage('Configure R-CORD - Subscriber') {
+ timeout(1) {
+ waitUntil {
+ out_subscriber = sh returnStdout: true, script: """
+ curl -s -H 'xos-username: admin@opencord.org' -H 'xos-password: letmein' -X POST --data-binary @${configFileName}-subscriber.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
+ """
+ return out_subscriber.toInteger() == 1
+ }
+ }
+ }
+ stage('Configure R-CORD - OLT') {
+ timeout(1) {
+ waitUntil {
+ out_olt = sh returnStdout: true, script: """
+ curl -H 'xos-username: admin@opencord.org' -H 'xos-password: letmein' -X POST --data-binary @${configFileName}-olt.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
+ """
+ return out_olt.toInteger() == 1
+ }
+ }
+ }
+ }
+ currentBuild.result = 'SUCCESS'
+ } catch (err) {
+ currentBuild.result = 'FAILURE'
+ step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false])
+ }
+ echo "RESULT: ${currentBuild.result}"
+ }
+}