diff --git a/Jenkinsfile-rcordlite-control-plane b/Jenkinsfile-rcordlite-control-plane
new file mode 100644
index 0000000..8eafcf5
--- /dev/null
+++ b/Jenkinsfile-rcordlite-control-plane
@@ -0,0 +1,177 @@
+// Copyright 2017-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+node ("${TestNodeName}") {
+    timeout (time: 240) {
+        stage ("Parse deployment configuration file") {
+            sh returnStdout: true, script: 'rm -rf ${configRepoBaseDir}'
+            sh returnStdout: true, script: 'git clone -b ${branch} ${configRepoUrl}'
+            deployment_config = readYaml file: "${configRepoBaseDir}${configRepoFile}"
+        }
+        
+        stage('Export pod config') {
+            timeout(10) {
+                try {
+                    sh """
+                    cd /home/cord
+                    rm -rf /home/cord/helm-charts
+                    git clone -b ${branch} https://gerrit.opencord.org/helm-charts
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    kubectl get pods
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+        stage('Clean up') {
+            timeout(10) {
+                sh returnStdout: true, script: """
+                rm -rf helm-charts cord-tester
+                git clone -b ${branch} ${cordRepoUrl}/helm-charts
+                export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
+                for hchart in \$(helm list -q | grep -E -v 'docker-registry|mavenrepo|ponnet');
+                do
+                    echo "Purging chart: \${hchart}"
+                    helm delete --purge "\${hchart}"
+                done
+                """
+                timeout(5) {
+                    waitUntil {
+                        helm_deleted = sh returnStdout: true, script: """
+                        export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+                        helm ls -q | grep -E -v 'docker-registry|mavenrepo|ponnet' | wc -l
+                        """
+                        return helm_deleted.toInteger() == 0
+                    }
+                }
+                timeout(5) {
+                    waitUntil {
+                        kubectl_deleted = sh returnStdout: true, script: """
+                        export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
+                        kubectl get pods --all-namespaces --no-headers | grep -E -v 'kube-system|docker-registry|mavenrepo|ponnet' | wc -l
+                        """
+                        return kubectl_deleted.toInteger() == 0
+                    }
+                }
+            }
+        }
+        stage('Install xos-core and rcord-lite') {
+            timeout(10) {
+                try {
+                    sh """
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    cd /home/cord/helm-charts
+                    helm dep update xos-core
+                    helm install -n xos-core xos-core
+                    helm dep update xos-profiles/rcord-lite
+                    helm install -n rcord-lite xos-profiles/rcord-lite
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+        stage('Install voltha') {
+            timeout(10) {
+                try {
+                    sh """
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    cd /home/cord/helm-charts/voltha  
+                    helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com/
+                    helm dep build
+                    cd /home/cord/helm-charts
+                    helm install -n voltha --set etcd-operator.customResources.createEtcdClusterCRD=false voltha
+                    helm upgrade --set etcd-operator.customResources.createEtcdClusterCRD=true voltha ./voltha
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+        stage('Install ONOS-Voltha and ONOS-Fabric') {
+            timeout(10) {
+                try {
+                    sh """
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    cd /home/cord/helm-charts
+                    helm install -n onos-fabric -f configs/onos-fabric.yaml onos
+                    helm install -n onos-voltha -f configs/onos-voltha.yaml onos
+                    sleep 60
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+        stage('Download cord-tester repo') {
+            timeout(10) {
+                try {
+                    sh """
+                    rm -rf /home/cord/cord-tester
+                    cd /home/cord/
+                    git clone -b ${branch} https://gerrit.opencord.org/cord-tester 
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+        stage('Validate Helm Chart Install') {
+            timeout(10) {
+                try {
+                    sh """
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    cd /home/cord/cord-tester/src/test/robot/
+                    rm -rf Log/ || true
+                    pybot -d Log -T SanityK8POD.robot || true
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+        stage('Verify E2E XOS') {
+            timeout(10) {
+                try {
+                    sh """
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    chameleon=\$(kubectl get pods | grep chameleon | cut -d' ' -f1)
+                    echo \$chameleon
+                    kubectl delete pod \$chameleon
+                    sleep 120
+                    kubectl get pods
+                    cd /home/cord/cord-tester/src/test/cord-api/Properties/
+                    sed -i \"s/^\\(SERVER_IP = \\).*/\\1\'${deployment_config.node1.ip}\'/\" RestApiProperties.py
+                    sed -i \"s/^\\(SERVER_PORT = \\).*/\\1\'30006\'/\" RestApiProperties.py
+                    sed -i \"s/^\\(XOS_USER = \\).*/\\1\'admin@opencord.org\'/\" RestApiProperties.py
+                    sed -i \"s/^\\(XOS_PASSWD = \\).*/\\1\'letmein\'/\" RestApiProperties.py
+                    cd /home/cord/cord-tester/src/test/cord-api/Tests
+                    rm -rf Log/ || true
+                    pybot -d Log -T VOLTDevice_Test.txt || true
+                    pybot -d Log -T RCORDLite_E2ETest.txt || true
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+        stage('Publish') {
+            try {
+                sh """
+                if [ -d RobotLogs ]; then rm -r RobotLogs; fi; mkdir RobotLogs;
+                mkdir RobotLogs/TestDoc || true
+                cp -r /home/cord/cord-tester/src/test/robot/Log/* ./RobotLogs || true
+                cp -r /home/cord/cord-tester/src/test/cord-api/Tests/Log/* ./RobotLogs || true
+                """
+                step([$class: 'RobotPublisher',
+                    disableArchiveOutput: false,
+                    logFileName: 'RobotLogs/log*.html',
+                    otherFiles: '',
+                    outputFileName: 'RobotLogs/output*.xml',
+                    outputPath: '.',
+                    passThreshold: 100,
+                    reportFileName: 'RobotLogs/report*.html',
+                    unstableThreshold: 0])
+            } catch(error) {}
+        }
+        step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false])
+    }
+}