diff --git a/src/test/cord-api/Tests/WorkflowValidations/SIAB.robot b/src/test/cord-api/Tests/WorkflowValidations/SIAB.robot
index 1c78a2c..f1efc08 100644
--- a/src/test/cord-api/Tests/WorkflowValidations/SIAB.robot
+++ b/src/test/cord-api/Tests/WorkflowValidations/SIAB.robot
@@ -37,29 +37,32 @@
 ${WHITELIST_PATHFILE}      ${CURDIR}/data/SIABWhitelist.json
 ${SUBSCRIBER_PATHFILE}     ${CURDIR}/data/SIABSubscriber.json
 ${VOLT_DEVICE_PATHFILE}    ${CURDIR}/data/SIABOLTDevice.json
-${export_kube_config}      export KUBECONFIG=/home/cord/.kube/config
+${export_kube_config}      export KUBECONFIG=/home/%{USER}/.kube/config
 ${kube_node_ip}            localhost
 ${dst_host_ip}             172.18.0.10
+${local_user}              %{USER}
+${local_pass}              %{USER}
 
 *** Test Cases ***
 ONU in Correct Location
     [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
     ...    Configure whitelist with correct ONU location
     ...    Validate successful authentication/DHCP/E2E ping
+    [Tags]    test1
     Wait Until Keyword Succeeds    300s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
-    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
-    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     ${subscriber_id}=    Retrieve Subscriber    ${c_tag}
     CORD Put    ${VOLT_SUBSCRIBER}    {"status":"disabled"}    ${subscriber_id}
-    Validate DHCP and Ping    True    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    True    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Restart RG Pod
     CORD Put    ${VOLT_SUBSCRIBER}    {"status":"enabled"}    ${subscriber_id}
-    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
-    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
 
 ONU in Correct Location -> Remove ONU from Whitelist -> Add ONU to Whitelist
     [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
@@ -72,24 +75,24 @@
     Wait Until Keyword Succeeds    300s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
-    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
-    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Restart RG Pod
     Remove Whitelist
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
-    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
-    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Restart RG Pod
     Create Whitelist
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
-    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
-    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
 
 ONU in Correct Location -> ONU in Wrong Location -> ONU in Correct Location
     [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
@@ -102,24 +105,24 @@
     Wait Until Keyword Succeeds    300s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
-    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
-    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Restart RG Pod
     Update Whitelist with Wrong Location
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
-    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
-    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Restart RG Pod
     Update Whitelist with Correct Location
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
-    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
-    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
 
 ONU in Correct Location -> Remove Subscriber -> Create Subscriber
     [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
@@ -132,21 +135,21 @@
     Wait Until Keyword Succeeds    300s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
-    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
-    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Restart RG Pod
     Remove Subscriber
-    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
-    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Restart RG Pod
     Create Subscriber
     Wait Until Keyword Succeeds    90s    2s    Validate Subscriber Status    pre-provisioned    ${onu_device}
-    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
-    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
 
 ONU in Correct Location (Skip Subscriber Provisioning) -> Provision Subscriber
     [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
@@ -157,16 +160,16 @@
     Remove Subscriber
     Wait Until Keyword Succeeds    300s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
-    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
-    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Restart RG Pod
     Create Subscriber
     Wait Until Keyword Succeeds    90s    2s    Validate Subscriber Status    pre-provisioned    ${onu_device}
-    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
-    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
 
 ONU in Correct Location (Skip Authentication)
     [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
@@ -175,7 +178,7 @@
     Wait Until Keyword Succeeds    300s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
-    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
 
 ONU not in Whitelist
     [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
@@ -185,10 +188,10 @@
     Wait Until Keyword Succeeds    300s    15s    Validate ONU States    UNKNOWN    DISABLED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
-    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
-    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
 
 ONU not in Whitelist (Skip Subscriber Provisioning) -> Add ONU to Whitelist -> Provision Subscriber
     [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
@@ -202,22 +205,22 @@
     Remove Subscriber
     Wait Until Keyword Succeeds    300s    15s    Validate ONU States    UNKNOWN    DISABLED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
-    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
-    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Restart RG Pod
     Create Whitelist
     Wait Until Keyword Succeeds    300s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
-    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
-    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Restart RG Pod
     Create Subscriber
     Wait Until Keyword Succeeds    90s    2s    Validate Subscriber Status    pre-provisioned    ${onu_device}
-    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
-    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
 
 ONU in Wrong Location
     [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
@@ -227,10 +230,10 @@
     Wait Until Keyword Succeeds    300s    15s    Validate ONU States    UNKNOWN    DISABLED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
-    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
-    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
 
 ONU in Wrong Location (Skip Subscriber Provisioning) -> ONU in Correct Location -> Provision Subscriber
     [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
@@ -244,23 +247,23 @@
     Remove Subscriber
     Wait Until Keyword Succeeds    300s    15s    Validate ONU States    UNKNOWN    DISABLED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
-    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
-    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Restart RG Pod
     Update Whitelist with Correct Location
     Wait Until Keyword Succeeds    300s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
-    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
-    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Restart RG Pod
     Create Subscriber
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
-    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     cord    cord    K8S    ${RG_CONTAINER}
+    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
-    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    cord    cord    K8S    ${RG_CONTAINER}
+    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
 
 *** Keywords ***
 Setup
@@ -300,11 +303,11 @@
     Append To List    ${container_list}    xos-core
     Append To List    ${container_list}    vcore
     Set Suite Variable    ${container_list}
-    ${datetime}=    Get Current Datetime On Kubernetes Node    localhost    cord    cord
+    ${datetime}=    Get Current Datetime On Kubernetes Node    localhost    ${local_user}    ${local_pass}
     Set Suite Variable    ${datetime}
 
 Setup Test
-    ${datetime}=    Get Current Datetime On Kubernetes Node    ${kube_node_ip}     cord    cord
+    ${datetime}=    Get Current Datetime On Kubernetes Node    ${kube_node_ip}     ${local_user}    ${local_pass}
     Set Suite Variable    ${datetime}
     ${RG_CONTAINER}=    Run    kubectl -n voltha get pod|grep "^rg-"|cut -d' ' -f1
     Set Suite Variable    ${RG_CONTAINER}