# Copyright 2017-present Open Networking Foundation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

*** Settings ***
Documentation     Test various E2E conditions for seba-in-a-box
Suite Setup       Setup
Suite Teardown    Delete All Sessions
Test Setup        Setup Test
Test Teardown     Test Cleanup
Library           Collections
Library           String
Library           OperatingSystem
Library           XML
Library           RequestsLibrary
Library           ../../Framework/utils/utils.py
Resource          ../../Framework/utils/utils.robot
Library           ../../Framework/restApi.py
Resource          ../../Framework/Subscriber.robot
Resource          ../../Framework/ATTWorkFlowDriver.robot
Resource          ../../Framework/Kubernetes.robot
Resource          ../../Framework/ONU.robot
Resource          ../../Framework/DHCP.robot
Variables         ../../Properties/RestApiProperties.py

*** Variables ***
${WHITELIST_PATHFILE}      ${CURDIR}/data/SIABWhitelist.json
${SUBSCRIBER_PATHFILE}     ${CURDIR}/data/SIABSubscriber.json
${VOLT_DEVICE_PATHFILE}    ${CURDIR}/data/SIABOLTDevice.json
${export_kube_config}      export KUBECONFIG=/home/%{USER}/.kube/config
${kube_node_ip}            localhost
${dst_host_ip}             172.18.0.10
${local_user}              %{USER}
${local_pass}              %{USER}

*** Test Cases ***
ONU in Correct Location
    [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
    ...    Configure whitelist with correct ONU location
    ...    Validate successful authentication/DHCP/E2E ping
    [Tags]    test1
    Wait Until Keyword Succeeds    300s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    ${subscriber_id}=    Retrieve Subscriber    ${c_tag}
    CORD Put    ${VOLT_SUBSCRIBER}    {"status":"disabled"}    ${subscriber_id}
    Validate DHCP and Ping    True    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Restart RG Pod
    CORD Put    ${VOLT_SUBSCRIBER}    {"status":"enabled"}    ${subscriber_id}
    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}

ONU in Correct Location -> Remove ONU from Whitelist -> Add ONU to Whitelist
    [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
    ...    Configure whitelist with correct ONU location
    ...    Validate successful authentication/DHCP/E2E ping
    ...    Remove ONU from whitelist
    ...    Validate failed authentication/DHCP/E2E ping
    ...    Add ONU to whitelist
    ...    Validate successful authentication/DHCP/E2E ping
    Wait Until Keyword Succeeds    300s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Restart RG Pod
    Remove Whitelist
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Restart RG Pod
    Create Whitelist
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}

ONU in Correct Location -> ONU in Wrong Location -> ONU in Correct Location
    [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
    ...    Configure whitelist with correct ONU location
    ...    Validate successful authentication/DHCP/E2E ping
    ...    Update whitelist with wrong ONU location
    ...    Validate failed authentication/DHCP/E2E ping
    ...    Update whitelist with correct ONU location
    ...    Validate successful authentication/DHCP/E2E ping
    Wait Until Keyword Succeeds    300s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Restart RG Pod
    Update Whitelist with Wrong Location
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Restart RG Pod
    Update Whitelist with Correct Location
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}

ONU in Correct Location -> Remove Subscriber -> Create Subscriber
    [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
    ...    Configure whitelist with correct ONU location
    ...    Validate successful authentication/DHCP/E2E ping
    ...    Remove subscriber model
    ...    Validate failed authentication/DHCP/E2E ping
    ...    Recreate subscriber model
    ...    Validate successful authentication/DHCP/E2E ping
    Wait Until Keyword Succeeds    300s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Restart RG Pod
    Remove Subscriber
    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Restart RG Pod
    Create Subscriber
    Wait Until Keyword Succeeds    90s    2s    Validate Subscriber Status    pre-provisioned    ${onu_device}
    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}

ONU in Correct Location (Skip Subscriber Provisioning) -> Provision Subscriber
    [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
    ...    Configure whitelist with correct ONU location and skip provisioning subscriber
    ...    Validate successful authentication (expected with the ONF pod setup) but failed DHCP/E2E ping
    ...    Provision subscriber
    ...    Validate successful authentication/DHCP/E2E ping
    Remove Subscriber
    Wait Until Keyword Succeeds    300s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Restart RG Pod
    Create Subscriber
    Wait Until Keyword Succeeds    90s    2s    Validate Subscriber Status    pre-provisioned    ${onu_device}
    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}

ONU in Correct Location (Skip Authentication)
    [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
    ...    Configure whitelist with correct ONU location and skip RG authentication
    ...    Validate failed authentication/DHCP/E2E ping
    Wait Until Keyword Succeeds    300s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}

ONU not in Whitelist
    [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
    ...    Skip whitelist configuration for ONU
    ...    Validate failed authentication/DHCP/E2E ping
    Remove Whitelist
    Wait Until Keyword Succeeds    300s    15s    Validate ONU States    UNKNOWN    DISABLED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}

ONU not in Whitelist (Skip Subscriber Provisioning) -> Add ONU to Whitelist -> Provision Subscriber
    [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
    ...    Skip whitelist configuration for ONU and subscriber provisioning
    ...    Validate successful authentication but failed DHCP/E2E ping
    ...    Configure whitelist with correct ONU location
    ...    Validate successful authentication (expected with the ONF pod setup) but failed DHCP/E2E ping
    ...    Provision subscriber
    ...    Validate successful authentication/DHCP/E2E ping
    Remove Whitelist
    Remove Subscriber
    Wait Until Keyword Succeeds    300s    15s    Validate ONU States    UNKNOWN    DISABLED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Restart RG Pod
    Create Whitelist
    Wait Until Keyword Succeeds    300s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Restart RG Pod
    Create Subscriber
    Wait Until Keyword Succeeds    90s    2s    Validate Subscriber Status    pre-provisioned    ${onu_device}
    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}

ONU in Wrong Location
    [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
    ...    Configure whitelist with wrong ONU location
    ...    Validate failed authentication/DHCP/E2E ping
    Update Whitelist with Wrong Location
    Wait Until Keyword Succeeds    300s    15s    Validate ONU States    UNKNOWN    DISABLED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}

ONU in Wrong Location (Skip Subscriber Provisioning) -> ONU in Correct Location -> Provision Subscriber
    [Documentation]    Validates E2E Ping Connectivity and object states for the given scenario:
    ...    Configure whitelist with wrong ONU location and skip subscriber provisioning
    ...    Validate failed authentication/DHCP/E2E ping
    ...    Configure whitelist with correct ONU location
    ...    Validate successful authentication (expected with the ONF pod setup) but failed DHCP/E2E ping
    ...    Provision subscriber
    ...    Validate successful authentication/DHCP/E2E ping
    Update Whitelist with Wrong Location
    Remove Subscriber
    Wait Until Keyword Succeeds    300s    15s    Validate ONU States    UNKNOWN    DISABLED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
    Validate Authentication    False    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Restart RG Pod
    Update Whitelist with Correct Location
    Wait Until Keyword Succeeds    300s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
    Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Restart RG Pod
    Create Subscriber
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
    Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
    Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}

*** Keywords ***
Setup
    ${auth} =    Create List    ${XOS_USER}    ${XOS_PASSWD}
    ${HEADERS}    Create Dictionary    Content-Type=application/json
    Create Session    ${server_ip}    http://${server_ip}:${server_port}    auth=${AUTH}    headers=${HEADERS}
    ${att_workflow_service_id}=    Get Service Owner Id    ${ATT_SERVICE}
    ${volt_service_id}=    Get Service Owner Id    ${VOLT_SERVICE}
    ${AttWhiteListList}=    utils.jsonToList    ${WHITELIST_PATHFILE}   AttWhiteListInfo
    Set Suite Variable    ${AttWhiteListList}
    ${AttWhiteListDict}=    utils.listToDict    ${AttWhiteListList}    0
    ${AttWhiteListDict}=    utils.setFieldValueInDict    ${AttWhiteListDict}    owner_id    ${att_workflow_service_id}
    ${onu_device}=   Get From Dictionary    ${AttWhiteListDict}    serial_number
    Log    ${onu_device}
    Set Global Variable    ${onu_device}
    ${onu_location}=   Get From Dictionary    ${AttWhiteListDict}    pon_port_id
    Set Global Variable    ${onu_location}
    ${SubscriberList}=    utils.jsonToList    ${SUBSCRIBER_PATHFILE}   SubscriberInfo
    Set Global Variable    ${SubscriberList}
    ${SubscriberDict}=    utils.listToDict    ${SubscriberList}    0
    ${s_tag}=    utils.getFieldValueFromDict    ${SubscriberDict}   s_tag
    ${c_tag}=    utils.getFieldValueFromDict    ${SubscriberDict}   c_tag
    ${VoltDeviceList}=    utils.jsonToList    ${VOLT_DEVICE_PATHFILE}   VOLTDeviceInfo
    Set Global Variable    ${VoltDeviceList}
    Set Suite Variable    ${s_tag}
    Set Suite Variable    ${c_tag}
    ${whitelist_id}=    Retrieve Whitelist Entry    ${onu_device}
    Set Suite Variable    ${whitelist_id}
    ${att_si_id}=    Retrieve ATT Service Instance ID    ${onu_device}
    Set Suite Variable    ${att_si_id}
    ${RG_CONTAINER}=    Run    kubectl -n voltha get pod|grep "^rg-"|cut -d' ' -f1
    Set Suite Variable    ${RG_CONTAINER}
    ## Validate ATT Workflow SI
    Wait Until Keyword Succeeds    90s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
    @{container_list}=    Create List
    Append To List    ${container_list}    att-workflow-att-workflow-driver
    Append To List    ${container_list}    xos-core
    Append To List    ${container_list}    vcore
    Set Suite Variable    ${container_list}
    ${datetime}=    Get Current Datetime On Kubernetes Node    localhost    ${local_user}    ${local_pass}
    Set Suite Variable    ${datetime}

Setup Test
    ${datetime}=    Get Current Datetime On Kubernetes Node    ${kube_node_ip}     ${local_user}    ${local_pass}
    Set Suite Variable    ${datetime}
    ${RG_CONTAINER}=    Run    kubectl -n voltha get pod|grep "^rg-"|cut -d' ' -f1
    Set Suite Variable    ${RG_CONTAINER}

Test Cleanup
    [Documentation]    Restore back to initial state per each test
    Log Kubernetes Containers Logs Since Time    ${datetime}    ${container_list}
    Restart RG Pod
    ${status}    ${whitelist_id}=    Run Keyword And Ignore Error    Retrieve Whitelist Entry    ${onu_device}
    Run Keyword And Ignore Error    CORD Put    ${ATT_WHITELIST}    {"pon_port_id": 1 }    ${whitelist_id}
    Run Keyword And Ignore Error    CORD Put    ${ATT_SERVICEINSTANCES}    {"authentication_state": "AWAITING"}    ${att_si_id}
    Run Keyword And Ignore Error    CORD Put    ${ATT_SERVICEINSTANCES}    {"onu_state": "ENABLED"}    ${att_si_id}
    Run Keyword And Ignore Error    Create Whitelist
    Run Keyword And Ignore Error    Create Subscriber

Restart RG Pod
    Run    kubectl -n voltha delete pod ${RG_CONTAINER}
    ${RG_CONTAINER}=    Wait Until Keyword Succeeds    60s    1s    Run    kubectl -n voltha get pod|grep "^rg-"|cut -d' ' -f1
    Set Suite Variable    ${RG_CONTAINER}
    Run    kubectl wait -n voltha pod/${RG_CONTAINER} --for condition=Ready --timeout=180s

Create Whitelist
    ${AttWhiteListDict}=    utils.listToDict    ${AttWhiteListList}    0
    ${resp}=    CORD Post    ${ATT_WHITELIST}    ${AttWhiteListDict}
    ${whitelist_id}=    Get Json Value    ${resp.content}    /id
    Set Global Variable    ${whitelist_id}

Remove Whitelist
    ${whitelist_id}=    Retrieve Whitelist Entry    ${onu_device}
    CORD Delete    ${ATT_WHITELIST}    ${whitelist_id}

Create Subscriber
    ${SubscriberDict}=    utils.listToDict    ${SubscriberList}    0
    CORD Post    ${VOLT_SUBSCRIBER}    ${SubscriberDict}

Remove Subscriber
    ${subscriber_id}=    Retrieve Subscriber    ${c_tag}
    CORD Delete    ${VOLT_SUBSCRIBER}    ${subscriber_id}

Create VOLT
    ${VoltDeviceDict}=    utils.listToDict    ${VoltDeviceList}    0
    CORD Post    ${VOLT_DEVICE}    ${VoltDeviceDict}

Update Whitelist with Wrong Location
    ${whitelist_id}=    Retrieve Whitelist Entry    ${onu_device}
    CORD Put    ${ATT_WHITELIST}    {"pon_port_id": 55 }    ${whitelist_id}

Update Whitelist with Correct Location
    ${whitelist_id}=    Retrieve Whitelist Entry    ${onu_device}
    CORD Put    ${ATT_WHITELIST}    {"pon_port_id": ${onu_location} }    ${whitelist_id}