diff --git a/src/test/cord-api/Tests/BBSim/BBSIM.robot b/src/test/cord-api/Tests/BBSim/BBSIM.robot
new file mode 100644
index 0000000..17dcf5b
--- /dev/null
+++ b/src/test/cord-api/Tests/BBSim/BBSIM.robot
@@ -0,0 +1,121 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+Documentation     Test various E2E conditions for seba-in-a-box
+Suite Setup       Setup
+Suite Teardown    Teardown
+Library           Collections
+Library           String
+Library           OperatingSystem
+Library           XML
+Library           RequestsLibrary
+Library           bbsim_utils.py
+Library           ../../Framework/utils/utils.py
+Resource          ../../Framework/utils/utils.robot
+Library           ../../Framework/restApi.py
+Resource          ../../Framework/Subscriber.robot
+Resource          ../../Framework/ATTWorkFlowDriver.robot
+Resource          ../../Framework/Kubernetes.robot
+Resource          ../../Framework/ONU.robot
+Resource          ../../Framework/DHCP.robot
+Variables         ../../Properties/RestApiProperties.py
+
+*** Variables ***
+${number_of_onus}    16
+
+*** Test Cases ***
+Debug
+    [Tags]    debug
+    Log    debug
+
+Create Subscriber and Whitelist for ONUs
+    [Documentation]    Creates whitelists in ATT-WF for each onu device
+    [Tags]    play
+    ${att_workflow_service_id}=    Get Service Owner Id    ${ATT_SERVICE}
+    ${volt_service_id}=    Get Service Owner Id    ${VOLT_SERVICE}
+    ${rcord_service_id}=    Get Service Owner Id    /xosapi/v1/rcord/rcordservices
+    CORD Post    ${VOLT_DEVICE}   {'device_type': 'openolt', 'host': 'bbsim.voltha.svc', 'port': 50060, 'switch_datapath_id': 'of:0000000000000002', 'switch_port': '3', 'outer_tpid': '0x8100', 'uplink': '65536', 'nas_id': 'NAS_ID', 'serial_number': 'bbsim.voltha.svc:50060', 'volt_service_id': ${volt_service_id}}
+    @{subscribers}=    Generate Subscribers    ${number_of_onus}    ${rcord_service_id}
+    : FOR    ${subscriber}    IN    @{subscribers}
+    \    Log To Console    ${subscriber}
+    \    CORD Post    ${VOLT_SUBSCRIBER}    ${subscriber}
+    @{whitelists}=    Generate Whitelists    ${number_of_onus}    ${att_workflow_service_id}
+    : FOR    ${whitelist}    IN    @{whitelists}
+    \    Log To Console    ${whitelist}
+    \    CORD Post    ${ATT_WHITELIST}    ${whitelist}
+
+ONUs Discovered
+    [Documentation]    Validates All ONU Devices are discovered and retrieve SNs
+    [Tags]    onudiscovery
+    Wait Until Keyword Succeeds    120s    5s    Validate Number of ONU Devices    ${number_of_onus}
+
+Validate ONU States
+    [Documentation]    Validates All ONU Device states are "enabled" and "active"
+    [Tags]    onustates
+    : FOR    ${onu}    IN    @{serial_numbers}
+    \    Wait Until Keyword Succeeds    120s    5s    Validate ONU States    ACTIVE    ENABLED    ${onu}
+
+Validate ATT WF Driver SIs
+    [Documentation]    Validates all service instances per onu devices become "approved" and "dhcpdiscovered"
+    [Tags]    serviceinstances
+    : FOR    ${onu}    IN    @{serial_numbers}
+    \    Wait Until Keyword Succeeds    180s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu}
+    \    Wait Until Keyword Succeeds    240s    2s    Validate ATT Workflow Driver SI DHCP State    DHCPACK    ${onu}
+
+*** Keywords ***
+Setup
+    ${server_ip}=    Get Environment Variable    SERVER_IP    localhost
+    ${port}=    Get Environment Variable    SERVER_PORT    30001
+    ${auth} =    Create List    ${XOS_USER}    ${XOS_PASSWD}
+    ${HEADERS}    Create Dictionary    Content-Type=application/json
+    Create Session    ${server_ip}    http://${server_ip}:${port}    auth=${AUTH}    headers=${HEADERS}
+    @{container_list}=    Create List
+    Append To List    ${container_list}    att-workflow-att-workflow-driver
+    Append To List    ${container_list}    seba-services-volt
+    Append To List    ${container_list}    seba-services-rcord
+    Append To List    ${container_list}    seba-services-fabric-crossconnect
+    Append To List    ${container_list}    seba-services-onos-service
+    Append To List    ${container_list}    xos-core
+    Append To List    ${container_list}    vcore
+    Set Suite Variable    ${container_list}
+
+Teardown
+    #Wait Until Keyword Succeeds    60s    2s    Clean Up Objects    ${VOLT_SUBSCRIBER}
+    #Wait Until Keyword Succeeds    60s    2s    Clean Up Objects    ${ATT_WHITELIST}
+    Delete All Sessions
+    #Get Pod Logs
+
+Get Pod Logs
+    : FOR    ${pod}    IN    @{container_list}
+    \    ${full_pod_name}=    Run    kubectl get pods --all-namespaces | grep '${pod}' | head -1 | awk '{print $2}'
+    \    ${namespace}=    Run    kubectl get pods --all-namespaces | grep ' ${pod}' | head -1 | awk '{print $1}'
+    \    ${output}=    Run    kubectl logs --timestamps -n ${namespace} ${full_pod_name}
+    \    Log    ${output}
+
+Validate Number of ONU Devices
+    [Arguments]    ${expected_onus}
+    ${resp}=    CORD Get    ${ONU_DEVICE}
+    ${jsondata}=    To Json    ${resp.content}
+    Log    ${jsondata}
+    ${length}=    Get Length    ${jsondata['items']}
+    @{serial_numbers}=    Create List
+    : FOR    ${INDEX}    IN RANGE    0    ${length}
+    \    ${value}=    Get From List    ${jsondata['items']}    ${INDEX}
+    \    ${sn}=    Get From Dictionary    ${value}    serial_number
+    \    ${contains}=    Evaluate    "BBSM" in """${sn}"""
+    \    Run Keyword if    '${contains}' == 'True'    Append To List    ${serial_numbers}    ${sn}
+    Set Suite Variable    ${serial_numbers}
+    ${length_of_bbsim_onus}=    Get Length    ${serial_numbers}
+    Should Be Equal as Integers    ${length_of_bbsim_onus}    ${expected_onus}
\ No newline at end of file
diff --git a/src/test/cord-api/Tests/BBSim/BBSIMScale.robot b/src/test/cord-api/Tests/BBSim/BBSIMScale.robot
index 4f07a08..721cded 100644
--- a/src/test/cord-api/Tests/BBSim/BBSIMScale.robot
+++ b/src/test/cord-api/Tests/BBSim/BBSIMScale.robot
@@ -74,14 +74,13 @@
     : FOR    ${onu}    IN    @{serial_numbers}
     \    Wait Until Keyword Succeeds    ${timeout}    5s    Validate ONU States    ACTIVE    ENABLED    ${onu}
 
-Validate Hosts and DHCP Allocations in ONOS
-    [Documentation]    Verify number of hosts in ONOS match number of onus and verify number of DHCP allocations
+Validate DHCP Allocations in ONOS
+    [Documentation]    Verify number of DHCP allocations in ONOS to match number of ONUs
     [Tags]    onosdhcp
-    #Wait Until Keyword Succeeds    ${timeout}    5s    Validate Hosts in ONOS    ${number_of_onus}
     Wait Until Keyword Succeeds    ${timeout}    5s    Validate DHCP Allocations    ${number_of_onus}
 
 Validate ATT WF Driver SIs
-    [Documentation]    Validates all service instances per onu devices become "approved" and "dhcpdiscovered"
+    [Documentation]    Validates all service instances per onu devices become "approved" and "dhcpack"
     [Tags]    serviceinstances
     : FOR    ${onu}    IN    @{serial_numbers}
     \    Wait Until Keyword Succeeds    ${timeout}    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu}
diff --git a/src/test/cord-api/Tests/WorkflowValidations/OLT_Reboot.robot b/src/test/cord-api/Tests/WorkflowValidations/OLT_Reboot.robot
new file mode 100644
index 0000000..1cd63b2
--- /dev/null
+++ b/src/test/cord-api/Tests/WorkflowValidations/OLT_Reboot.robot
@@ -0,0 +1,190 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+Documentation     Test various end-to-end scenarios with ATT workflow
+Suite Setup       Setup Suite
+Suite Teardown    Teardown Suite
+Test Setup        Setup Test
+Test Teardown     Teardown Test
+Library           Collections
+Library           String
+Library           OperatingSystem
+Library           XML
+Library           RequestsLibrary
+Library           ../../Framework/utils/utils.py
+Resource          ../../Framework/utils/utils.robot
+Library           ../../Framework/restApi.py
+Resource          ../../Framework/Subscriber.robot
+Resource          ../../Framework/ATTWorkFlowDriver.robot
+Resource          ../../Framework/Kubernetes.robot
+Resource          ../../Framework/ONU.robot
+Resource          ../../Framework/OLT.robot
+Resource          ../../Framework/DHCP.robot
+Variables         ../../Properties/RestApiProperties.py
+
+*** Variables ***
+${NUM_REBOOTS}      5
+${POD_NAME}                 flex-pod1-olt
+${KUBERNETES_CONFIGS_DIR}   ~/pod-configs/kubernetes-configs
+${HELM_CHARTS_DIR}          ~/helm-charts
+${WHITELIST_PATHFILE}       ${CURDIR}/data/${POD_NAME}/ATTWhiteList.json
+${SUBSCRIBER_PATHFILE}      ${CURDIR}/data/${POD_NAME}/ATTSubscriber.json
+${VOLT_DEVICE_PATHFILE}     ${CURDIR}/data/${POD_NAME}/RealOLTDevice.json
+${KUBERNETES_CONF}          ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
+${KUBERNETES_YAML}          ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml
+${VOLTHA_POD_NUM}           8
+
+*** Test Cases ***
+Reboot OLT
+    [Documentation]    Validate olt creation -> olt deletion
+    ${reboot_count}=    Convert To Integer    ${NUM_REBOOTS}
+    : FOR    ${INDEX}    IN RANGE    0    ${reboot_count}
+    \    Log To Console    \n Reboot Attempt - ${INDEX}
+    \    Setup Test
+    \    Wait Until Keyword Succeeds    300s    5s    Device in VOLTHA and ONOS
+    \    Wait Until Keyword Succeeds    Validate OLT States in XOS
+    \    Teardown Test
+
+*** Keywords ***
+Device in VOLTHA and ONOS
+    ${voltha_num}=    Run    curl -s -U voltha:admin http://10.90.0.101:30125/api/v1/devices| grep '10.90.0.114' | grep '"admin_state":"ENABLED"' | grep '"connect_status":"REACHABLE"' | grep '"oper_status":"ACTIVE"' | wc -l
+    ${onos_num}=    Run    sshpass -p'rocks' ssh onos@10.90.0.101 -p 30115 devices | grep voltha | grep OLT | grep available=true | grep local-status=connected | wc -l
+    Should Contain    ${voltha_num}    1
+    Should Contain    ${onos_num}    1
+
+Validate OLT States in XOS
+    ${xos_output}=    Run    curl -s -u admin@opencord.org:letmein http://10.90.0.101:30001/xosapi/v1/volt/oltdevices
+    Log    ${xos_output}
+    ${xos_num}=    Run    curl -s -u admin@opencord.org:letmein http://10.90.0.101:30001/xosapi/v1/volt/oltdevices | grep '10.90.0.114' | grep '"admin_state": "ENABLED"' | grep '"oper_status": "ACTIVE"' | wc -l
+    Should Contain    ${xos_num}
+
+Setup Suite
+    ${auth} =    Create List    ${XOS_USER}    ${XOS_PASSWD}
+    ${HEADERS}    Create Dictionary    Content-Type=application/json
+    Create Session    ${server_ip}    http://${server_ip}:${server_port}    auth=${AUTH}    headers=${HEADERS}
+    ${att_workflow_service_id}=    Get Service Owner Id    ${ATT_SERVICE}
+    ${volt_service_id}=    Get Service Owner Id    ${VOLT_SERVICE}
+    ${AttWhiteListList}=    utils.jsonToList    ${WHITELIST_PATHFILE}   AttWhiteListInfo
+    Set Suite Variable    ${AttWhiteListList}
+    ${AttWhiteListDict}=    utils.listToDict    ${AttWhiteListList}    0
+    ${AttWhiteListDict}=    utils.setFieldValueInDict    ${AttWhiteListDict}    owner_id    ${att_workflow_service_id}
+    ${onu_device}=   Get From Dictionary    ${AttWhiteListDict}    serial_number
+    Set Global Variable    ${onu_device}
+    ${onu_location}=   Get From Dictionary    ${AttWhiteListDict}    pon_port_id
+    Set Global Variable    ${onu_location}
+    ${SubscriberList}=    utils.jsonToList    ${SUBSCRIBER_PATHFILE}   SubscriberInfo
+    Set Global Variable    ${SubscriberList}
+    ${SubscriberDict}=    utils.listToDict    ${SubscriberList}    0
+    ${s_tag}=    utils.getFieldValueFromDict    ${SubscriberDict}   s_tag
+    ${c_tag}=    utils.getFieldValueFromDict    ${SubscriberDict}   c_tag
+    ${VoltDeviceList}=    utils.jsonToList    ${VOLT_DEVICE_PATHFILE}   VOLTDeviceInfo
+    ${VoltDeviceDict}=    utils.setFieldValueInDict    ${VoltDeviceList[0]}    volt_service_id    ${volt_service_id}
+    Set Global Variable    ${VoltDeviceList}
+    Set Global Variable    ${VoltDeviceDict}
+    Set Suite Variable    ${s_tag}
+    Set Suite Variable    ${c_tag}
+    Set Global Variable    ${export_kubeconfig}    export KUBECONFIG=${KUBERNETES_CONF}
+    # Read variables from yaml file
+    ${src_ip}=    Evaluate    ${hosts}.get("src").get("ip")
+    ${src_user}=    Evaluate    ${hosts}.get("src").get("user")
+    ${src_pass}=    Evaluate    ${hosts}.get("src").get("pass")
+    ${src_container_type}=    Evaluate    ${hosts}.get("src").get("container_type")
+    ${src_container_name}=    Evaluate    ${hosts}.get("src").get("container_name")
+    ${src_iface}=    Evaluate    ${hosts}.get("src").get("dp_iface_name")
+    ${dst_ip}=    Evaluate    ${hosts}.get("dst").get("ip")
+    ${dst_user} =    Evaluate    ${hosts}.get("dst").get("user")
+    ${dst_pass}=    Evaluate    ${hosts}.get("dst").get("pass")
+    ${dst_container_type}=    Evaluate    ${hosts}.get("dst").get("container_type")
+    ${dst_container_name}=    Evaluate    ${hosts}.get("dst").get("container_name")
+    ${dst_dp_iface}=    Evaluate    ${hosts}.get("dst").get("dp_iface_name")
+    ${dst_dp_ip}=    Evaluate    ${hosts}.get("dst").get("dp_iface_ip_qinq")
+    ${olt_ip}=    Evaluate    ${olts}[0].get("ip")
+    ${olt_user}=    Evaluate    ${olts}[0].get("user")
+    ${olt_pass}=    Evaluate    ${olts}[0].get("pass")
+    ${k8s_node_ip}=    Evaluate    ${nodes}[0].get("ip")
+    ${k8s_node_user}=    Evaluate    ${nodes}[0].get("user")
+    ${k8s_node_pass}=    Evaluate    ${nodes}[0].get("pass")
+    Set Suite Variable    ${src_ip}
+    Set Suite Variable    ${src_user}
+    Set Suite Variable    ${src_pass}
+    Set Suite Variable    ${src_container_type}
+    Set Suite Variable    ${src_container_name}
+    Set Suite Variable    ${src_iface}
+    Set Suite Variable    ${dst_ip}
+    Set Suite Variable    ${dst_user}
+    Set Suite Variable    ${dst_pass}
+    Set Suite Variable    ${dst_container_type}
+    Set Suite Variable    ${dst_container_name}
+    Set Suite Variable    ${dst_dp_iface}
+    Set Suite Variable    ${dst_dp_ip}
+    Set Suite Variable    ${olt_ip}
+    Set Suite Variable    ${olt_user}
+    Set Suite Variable    ${olt_pass}
+    Set Suite Variable    ${k8s_node_ip}
+    Set Suite Variable    ${k8s_node_user}
+    Set Suite Variable    ${k8s_node_pass}
+    @{container_list}=    Create List
+    Append To List    ${container_list}    att-workflow-att-workflow-driver
+    Append To List    ${container_list}    seba-services-volt
+    Append To List    ${container_list}    seba-services-rcord
+    Append To List    ${container_list}    seba-services-fabric-crossconnect
+    Append To List    ${container_list}    xos-core
+    Append To List    ${container_list}    vcore
+    Set Suite Variable    ${container_list}
+    ${datetime}=    Get Current Datetime On Kubernetes Node    ${k8s_node_ip}    ${k8s_node_user}    ${k8s_node_pass}
+    Set Suite Variable    ${datetime}
+
+Teardown Suite
+    [Documentation]    Performs any additional cleanup required
+    Log    Suite Teardown cleanup
+    Delete All Sessions
+
+Setup Test
+    [Documentation]    Re-create Subscriber, whitelist, and olt-device models to test
+    Log    Re-creating objects
+    ${datetime}=    Get Current Datetime On Kubernetes Node    ${k8s_node_ip}    ${k8s_node_user}    ${k8s_node_pass}
+    Create Whitelist
+    Create Subscriber
+    Create VOLT
+
+Teardown Test
+    [Documentation]    Delete xos objects, kills processes and cleans up interfaces on src+dst servers
+    Clean Up XOS
+    Log Kubernetes Containers Logs Since Time    ${datetime}    ${container_list}
+
+Clean Up XOS
+    [Documentation]    Clean up all XOS objects and reinstall voltha after OLT reboots
+    Wait Until Keyword Succeeds    60s    2s    Clean Up Objects    ${VOLT_SUBSCRIBER}
+    Wait Until Keyword Succeeds    60s    2s    Clean Up Objects    ${ATT_WHITELIST}
+    Sleep    20s
+    Wait Until Keyword Succeeds    30s    2s    Validate Subscriber Count    0
+    Sleep    10s
+    Wait Until Keyword Succeeds    60s    2s    Clean Up Objects    ${VOLT_DEVICE}
+    Sleep    20s
+    Wait Until Keyword Succeeds    60s    2s    Clean Up Objects    ${ATT_SERVICEINSTANCES}
+    Wait Until Keyword Succeeds    120s    10s    Check Remote System Reachability    False    ${olt_ip}
+    Wait Until Keyword Succeeds    120s    10s    Check Remote System Reachability    True    ${olt_ip}
+    Wait Until Keyword Succeeds    300s    1s    Openolt is Up    ${olt_ip}    ${olt_user}    ${olt_pass}
+
+Create Whitelist
+    ${AttWhiteListDict}=    utils.listToDict    ${AttWhiteListList}    0
+    CORD Post    ${ATT_WHITELIST}    ${AttWhiteListDict}
+
+Create Subscriber
+    ${SubscriberDict}=    utils.listToDict    ${SubscriberList}    0
+    Wait Until Keyword Succeeds    120s    15s    CORD Post    ${VOLT_SUBSCRIBER}    ${SubscriberDict}
+
+Create VOLT
+    CORD Post    ${VOLT_DEVICE}    ${VoltDeviceDict}
diff --git a/src/test/cord-api/Tests/WorkflowValidations/data/SIABBandwidthprofile.json b/src/test/cord-api/Tests/WorkflowValidations/data/SIABBandwidthprofile.json
new file mode 100644
index 0000000..948d92e
--- /dev/null
+++ b/src/test/cord-api/Tests/WorkflowValidations/data/SIABBandwidthprofile.json
@@ -0,0 +1,20 @@
+{
+    "BandwidthprofileInfo" : [
+     {
+            "name": "SIAB_Upstream_TP",
+            "cir": 111,
+            "cbs": 222,
+            "eir": 333,
+            "ebs": 444,
+            "air": 555
+     },
+     {
+            "name": "SIAB_Downstream_TP",
+            "cir": 555,
+            "cbs": 444,
+            "eir": 333,
+            "ebs": 222,
+            "air": 111
+     }
+  ]
+}
diff --git a/src/test/cord-api/Tests/XosScaleValidations/xos-service-migration.robot b/src/test/cord-api/Tests/XosScaleValidations/xos-service-migration.robot
new file mode 100644
index 0000000..8471c8d
--- /dev/null
+++ b/src/test/cord-api/Tests/XosScaleValidations/xos-service-migration.robot
@@ -0,0 +1,66 @@
+*** Settings ***
+Documentation     Test migration of a Service in the core
+Library           RequestsLibrary
+Library           HttpLibrary.HTTP
+Library           Collections
+Library           String
+Library           OperatingSystem
+Library           DateTime
+Library           ../../Framework/utils/utils.py
+Resource          ../../Framework/utils/utils.robot
+Library           ../../Framework/restApi.py
+Variables         ../../Properties/RestApiProperties.py
+Suite Setup       Setup
+Suite Teardown    Teardown
+
+*** Variables ***
+${timeout}    300s
+
+*** Test Cases ***
+Validate Service Version A
+    [Documentation]    Validate fields from model in version A
+    [Tags]    test1
+    ${resp} =   CORD Get    /xosapi/v1/core/users
+    ${jsondata} =    To Json    ${resp.content}
+    ${length} =    Get Length    ${jsondata['items']}
+    : FOR    ${INDEX}    IN RANGE    0    ${length}
+    \    ${dict}=    Get From List    ${jsondata['items']}    ${INDEX}
+    \    ${keys}=    Get Dictionary Keys    ${dict}
+    : FOR    ${field}    IN    @{model_A_fields}
+    \    List Should Contain Value    ${keys}    ${field}
+
+Upgrade Service
+    [Documentation]    Upgrade the version of the service and wait for completion
+    [Tags]    test2
+    Run    helm upgrade --set imageTag=2.0.0 demosimpleexampleservice
+    Wait Until Keyword Succeeds    ${timeout}    5s    Validate Pod Running
+
+Validate Service Version B
+    [Documentation]    Validate fields from model in upgraded version B (2.0.0)
+    [Tags]    test3
+    ${resp} =   CORD Get    /xosapi/v1/core/users
+    ${jsondata} =    To Json    ${resp.content}
+    ${length} =    Get Length    ${jsondata['items']}
+    : FOR    ${INDEX}    IN RANGE    0    ${length}
+    \    ${dict}=    Get From List    ${jsondata['items']}    ${INDEX}
+    \    ${keys}=    Get Dictionary Keys    ${dict}
+    : FOR    ${field}    IN    @{model_B_fields}
+    \    List Should Contain Value    ${keys}    ${field}
+
+*** Keywords ***
+Setup
+    ${auth} =    Create List    ${XOS_USER}    ${XOS_PASSWD}
+    ${HEADERS}    Create Dictionary    Content-Type=application/json    allow_modify_feedback=True
+    Create Session    ${server_ip}    http://${server_ip}:${server_port}    auth=${AUTH}    headers=${HEADERS}
+    @{model_A_fields}=    Create List    firstname    lastname    timezone
+    @{model_B_fields}=    Create List    firstname    lastname    timezone    newBfield
+    Set Suite Variable    @{model_A_fields}
+    Set Suite Variable    @{model_B_fields}
+
+Teardown
+    [Documentation]    Delete all https sessions
+    Delete All Sessions
+
+Validate Pod Running
+    ${output}=    Run    kubectl get pods | grep demo-simpleexampleservice | grep -i running | grep 1/1 | wc -l
+    Should Be Equal As Integers    ${output}    1