Tests with reduced OLT reboots
Change-Id: I4c544d2b2c3962f54d40683de8045f060dc43e9e
diff --git a/src/test/cord-api/Tests/WorkflowValidations/ATT_Test001_Optimized.robot b/src/test/cord-api/Tests/WorkflowValidations/ATT_Test001_Optimized.robot
new file mode 100644
index 0000000..9c5b318
--- /dev/null
+++ b/src/test/cord-api/Tests/WorkflowValidations/ATT_Test001_Optimized.robot
@@ -0,0 +1,430 @@
+# Copyright 2017-present Open Networking Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+Documentation Test various end-to-end scenarios with ATT workflow
+Suite Setup Setup Suite
+Suite Teardown Teardown Suite
+Test Setup Setup Test
+Test Teardown Teardown Test
+Library Collections
+Library String
+Library OperatingSystem
+Library XML
+Library RequestsLibrary
+Library /home/cord/voltha/tests/atests/common/testCaseUtils.py
+Library ../../Framework/utils/utils.py
+Resource ../../Framework/utils/utils.robot
+Library ../../Framework/restApi.py
+Resource ../../Framework/Subscriber.robot
+Resource ../../Framework/ATTWorkFlowDriver.robot
+Resource ../../Framework/Kubernetes.robot
+Resource ../../Framework/ONU.robot
+Resource ../../Framework/OLT.robot
+Resource ../../Framework/DHCP.robot
+Variables ../../Properties/RestApiProperties.py
+
+*** Variables ***
+${POD_NAME} flex-pod1-olt
+${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs
+${HELM_CHARTS_DIR} ~/helm-charts
+${WHITELIST_PATHFILE} ${CURDIR}/data/${POD_NAME}/ATTWhiteList.json
+${SUBSCRIBER_PATHFILE} ${CURDIR}/data/${POD_NAME}/ATTSubscriber.json
+${VOLT_DEVICE_PATHFILE} ${CURDIR}/data/${POD_NAME}/RealOLTDevice.json
+${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf
+${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml
+${VOLTHA_POD_NUM} 8
+
+*** Test Cases ***
+ONU in Correct Location
+ [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
+ ... Configure whitelist with correct ONU location
+ ... Validate successful authentication/DHCP/E2E ping
+ [Setup] None
+ [Teardown] None
+ [Tags] test1
+ Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device}
+ Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device}
+ Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+
+ONU in Correct Location -> Remove ONU from Whitelist -> Add ONU to Whitelist
+ [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
+ ... Configure whitelist with correct ONU location
+ ... Validate successful authentication/DHCP/E2E ping
+ ... Remove ONU from whitelist
+ ... Validate failed authentication/DHCP/E2E ping
+ ... Add ONU to whitelist
+ ... Validate successful authentication/DHCP/E2E ping
+ [Tags] test2
+ [Setup] None
+ [Teardown] None
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device}
+ # Disable ONU
+ Clean Up Linux
+ Remove Whitelist
+ Wait Until Keyword Succeeds 60s 2s Validate ONU States UNKNOWN DISABLED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device}
+ Validate Authentication False ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+ Clean Up Linux
+ Create Whitelist
+ Wait Until Keyword Succeeds 120s 5s Validate ONU States ACTIVE ENABLED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device}
+ Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device}
+ Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+
+ONU in Correct Location -> ONU in Wrong Location -> ONU in Correct Location
+ [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
+ ... Configure whitelist with correct ONU location
+ ... Validate successful authentication/DHCP/E2E ping
+ ... Update whitelist with wrong ONU location
+ ... Validate failed authentication/DHCP/E2E ping
+ ... Update whitelist with correct ONU location
+ ... Validate successful authentication/DHCP/E2E ping
+ [Tags] test3
+ [Setup] None
+ [Teardown] None
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device}
+ Clean Up Linux
+ Update Whitelist with Wrong Location
+ Wait Until Keyword Succeeds 60s 2s Validate ONU States UNKNOWN DISABLED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device}
+ Validate Authentication False ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+ Clean Up Linux
+ Update Whitelist with Correct Location
+ Wait Until Keyword Succeeds 120s 5s Validate ONU States ACTIVE ENABLED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device}
+ Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device}
+ Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+
+ONU in Correct Location -> Remove Subscriber -> Create Subscriber
+ [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
+ ... Configure whitelist with correct ONU location
+ ... Validate successful authentication/DHCP/E2E ping
+ ... Remove subscriber model
+ ... Validate successful authentication (expected with the ONF pod setup) but failed DHCP/E2E ping
+ ... Recreate subscriber model
+ ... Validate successful authentication/DHCP/E2E ping
+ [Tags] test4
+ [Setup] None
+ [Teardown] None
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device}
+ Clean Up Linux
+ Remove Subscriber
+ Sleep 10s
+ Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+ Clean Up Linux
+ Create Subscriber
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status pre-provisioned ${onu_device}
+ Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device}
+ Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+
+
+ONU in Correct Location (Skip Subscriber Provisioning) -> Provision Subscriber
+ [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
+ ... Configure whitelist with correct ONU location and skip provisioning subscriber
+ ... Validate successful authentication (expected with the ONF pod setup) but failed DHCP/E2E ping
+ ... Provision subscriber
+ ... Validate successful authentication/DHCP/E2E ping
+ [Setup] None
+ [Tags] test5
+ Create Whitelist
+ Create VOLT
+ Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device}
+ Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device}
+ Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+ Clean Up Linux
+ Create Subscriber
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status pre-provisioned ${onu_device}
+ Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device}
+ Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+
+ONU in Wrong Location
+ [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
+ ... Configure whitelist with wrong ONU location
+ ... Validate failed authentication/DHCP/E2E ping
+ [Tags] test9
+ [Setup] None
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device}
+ Clean Up Linux
+ Update Whitelist with Wrong Location
+ Wait Until Keyword Succeeds 300s 15s Validate ONU States UNKNOWN DISABLED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device}
+ Validate Authentication False ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device}
+ Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+
+ONU in Correct Location (Skip Authentication)
+ [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
+ ... Configure whitelist with correct ONU location and skip RG authentication
+ ... Validate failed authentication/DHCP/E2E ping
+ [Tags] test6
+ Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device}
+ Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+
+ONU not in Whitelist
+ [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
+ ... Skip whitelist configuration for ONU
+ ... Validate failed authentication/DHCP/E2E ping
+ [Setup] None
+ [Tags] test7
+ Create Subscriber
+ Create VOLT
+ Wait Until Keyword Succeeds 300s 15s Validate ONU States UNKNOWN DISABLED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device}
+ Validate Authentication False ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device}
+ Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+
+ONU not in Whitelist (Skip Subscriber Provisioning) -> Add ONU to Whitelist -> Provision Subscriber
+ [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
+ ... Skip whitelist configuration for ONU and subscriber provisioning
+ ... Validate successful authentication but failed DHCP/E2E ping
+ ... Configure whitelist with correct ONU location
+ ... Validate successful authentication (expected with the ONF pod setup) but failed DHCP/E2E ping
+ ... Provision subscriber
+ ... Validate successful authentication/DHCP/E2E ping
+ [Setup] None
+ [Tags] test8
+ Create VOLT
+ Wait Until Keyword Succeeds 300s 15s Validate ONU States UNKNOWN DISABLED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device}
+ Validate Authentication False ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device}
+ Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+ Clean Up Linux
+ Create Whitelist
+ Wait Until Keyword Succeeds 60s 2s Validate ONU States ACTIVE ENABLED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device}
+ Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device}
+ Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+ Clean Up Linux
+ Create Subscriber
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status pre-provisioned ${onu_device}
+ Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device}
+ Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+
+ONU in Wrong Location (Skip Subscriber Provisioning) -> ONU in Correct Location -> Provision Subscriber
+ [Documentation] Validates E2E Ping Connectivity and object states for the given scenario:
+ ... Configure whitelist with wrong ONU location and skip subscriber provisioning
+ ... Validate failed authentication/DHCP/E2E ping
+ ... Configure whitelist with correct ONU location
+ ... Validate successful authentication (expected with the ONF pod setup) but failed DHCP/E2E ping
+ ... Provision subscriber
+ ... Validate successful authentication/DHCP/E2E ping
+ [Setup] None
+ [Tags] test10
+ Create VOLT
+ Create Whitelist
+ Update Whitelist with Wrong Location
+ Wait Until Keyword Succeeds 300s 15s Validate ONU States UNKNOWN DISABLED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device}
+ Validate Authentication False ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device}
+ Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+ Clean Up Linux
+ Update Whitelist with Correct Location
+ Wait Until Keyword Succeeds 60s 2s Validate ONU States ACTIVE ENABLED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device}
+ Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device}
+ Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+ Clean Up Linux
+ Create Subscriber
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status pre-provisioned ${onu_device}
+ Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device}
+ Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device}
+ Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+
+*** Keywords ***
+Setup Suite
+ ${auth} = Create List ${XOS_USER} ${XOS_PASSWD}
+ ${HEADERS} Create Dictionary Content-Type=application/json
+ Create Session ${server_ip} http://${server_ip}:${server_port} auth=${AUTH} headers=${HEADERS}
+ ${att_workflow_service_id}= Get Service Owner Id ${ATT_SERVICE}
+ ${volt_service_id}= Get Service Owner Id ${VOLT_SERVICE}
+ ${AttWhiteListList}= utils.jsonToList ${WHITELIST_PATHFILE} AttWhiteListInfo
+ Set Suite Variable ${AttWhiteListList}
+ ${AttWhiteListDict}= utils.listToDict ${AttWhiteListList} 0
+ ${AttWhiteListDict}= utils.setFieldValueInDict ${AttWhiteListDict} owner_id ${att_workflow_service_id}
+ ${onu_device}= Get From Dictionary ${AttWhiteListDict} serial_number
+ Set Global Variable ${onu_device}
+ ${onu_location}= Get From Dictionary ${AttWhiteListDict} pon_port_id
+ Set Global Variable ${onu_location}
+ ${SubscriberList}= utils.jsonToList ${SUBSCRIBER_PATHFILE} SubscriberInfo
+ Set Global Variable ${SubscriberList}
+ ${SubscriberDict}= utils.listToDict ${SubscriberList} 0
+ ${s_tag}= utils.getFieldValueFromDict ${SubscriberDict} s_tag
+ ${c_tag}= utils.getFieldValueFromDict ${SubscriberDict} c_tag
+ ${VoltDeviceList}= utils.jsonToList ${VOLT_DEVICE_PATHFILE} VOLTDeviceInfo
+ ${VoltDeviceDict}= utils.setFieldValueInDict ${VoltDeviceList[0]} volt_service_id ${volt_service_id}
+ Set Global Variable ${VoltDeviceList}
+ Set Global Variable ${VoltDeviceDict}
+ Set Suite Variable ${s_tag}
+ Set Suite Variable ${c_tag}
+ Set Global Variable ${export_kubeconfig} export KUBECONFIG=${KUBERNETES_CONF}
+ # Read variables from yaml file
+ ${src_ip}= Evaluate ${hosts}.get("src").get("ip")
+ ${src_user}= Evaluate ${hosts}.get("src").get("user")
+ ${src_pass}= Evaluate ${hosts}.get("src").get("pass")
+ ${src_container_type}= Evaluate ${hosts}.get("src").get("container_type")
+ ${src_container_name}= Evaluate ${hosts}.get("src").get("container_name")
+ ${src_iface}= Evaluate ${hosts}.get("src").get("dp_iface_name")
+ ${dst_ip}= Evaluate ${hosts}.get("dst").get("ip")
+ ${dst_user} = Evaluate ${hosts}.get("dst").get("user")
+ ${dst_pass}= Evaluate ${hosts}.get("dst").get("pass")
+ ${dst_container_type}= Evaluate ${hosts}.get("dst").get("container_type")
+ ${dst_container_name}= Evaluate ${hosts}.get("dst").get("container_name")
+ ${dst_dp_iface}= Evaluate ${hosts}.get("dst").get("dp_iface_name")
+ ${dst_dp_ip}= Evaluate ${hosts}.get("dst").get("dp_iface_ip_qinq")
+ ${olt_ip}= Evaluate ${olts}[0].get("ip")
+ ${olt_user}= Evaluate ${olts}[0].get("user")
+ ${olt_pass}= Evaluate ${olts}[0].get("pass")
+ ${k8s_node_ip}= Evaluate ${nodes}[0].get("ip")
+ ${k8s_node_user}= Evaluate ${nodes}[0].get("user")
+ ${k8s_node_pass}= Evaluate ${nodes}[0].get("pass")
+ Set Suite Variable ${src_ip}
+ Set Suite Variable ${src_user}
+ Set Suite Variable ${src_pass}
+ Set Suite Variable ${src_container_type}
+ Set Suite Variable ${src_container_name}
+ Set Suite Variable ${src_iface}
+ Set Suite Variable ${dst_ip}
+ Set Suite Variable ${dst_user}
+ Set Suite Variable ${dst_pass}
+ Set Suite Variable ${dst_container_type}
+ Set Suite Variable ${dst_container_name}
+ Set Suite Variable ${dst_dp_iface}
+ Set Suite Variable ${dst_dp_ip}
+ Set Suite Variable ${olt_ip}
+ Set Suite Variable ${olt_user}
+ Set Suite Variable ${olt_pass}
+ Set Suite Variable ${k8s_node_ip}
+ Set Suite Variable ${k8s_node_user}
+ Set Suite Variable ${k8s_node_pass}
+ @{container_list}= Create List
+ Append To List ${container_list} att-workflow-att-workflow-driver
+ Append To List ${container_list} seba-services-volt
+ Append To List ${container_list} seba-services-rcord
+ Append To List ${container_list} onos
+ Append To List ${container_list} seba-services-fabric-crossconnect
+ Append To List ${container_list} xos-core
+ Append To List ${container_list} vcore
+ Set Suite Variable ${container_list}
+ ${datetime}= Get Current Datetime On Kubernetes Node ${k8s_node_ip} ${k8s_node_user} ${k8s_node_pass}
+ Set Suite Variable ${datetime}
+
+Teardown Suite
+ [Documentation] Performs any additional cleanup required
+ Log Suite Teardown cleanup
+ Delete All Sessions
+
+Setup Test
+ [Documentation] Re-create Subscriber, whitelist, and olt-device models to test
+ Log Re-creating objects
+ ${datetime}= Get Current Datetime On Kubernetes Node ${k8s_node_ip} ${k8s_node_user} ${k8s_node_pass}
+ Set Suite Variable ${datetime}
+ Create Whitelist
+ Create Subscriber
+ Create VOLT
+ Wait Until Keyword Succeeds 200s 15s Validate OLT States ACTIVE ENABLED ${olt_ip}
+
+Teardown Test
+ [Documentation] Delete xos objects, kills processes and cleans up interfaces on src+dst servers
+ Get VOLTHA Status
+ Get ONOS Status
+ Clean Up Linux
+ Clean Up XOS
+ Log Kubernetes Containers Logs Since Time ${datetime} ${container_list}
+
+Clean Up Linux
+ [Documentation] Kill processes and clean up interfaces on src+dst servers
+ Run Keyword And Ignore Error Kill Linux Process [w]pa_supplicant ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Run Keyword And Ignore Error Kill Linux Process [d]hclient ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Run Keyword If '${dst_ip}' != '${None}' Run Keyword And Ignore Error Kill Linux Process [d]hcpd ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+ Delete IP Addresses from Interface on Remote Host ${src_iface} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name}
+ Run Keyword If '${dst_ip}' != '${None}' Delete Interface on Remote Host ${dst_dp_iface}.${s_tag} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name}
+
+Clean Up XOS
+ [Documentation] Clean up all XOS objects and reinstall voltha after OLT reboots
+ Wait Until Keyword Succeeds 60s 2s Clean Up Objects ${VOLT_SUBSCRIBER}
+ Wait Until Keyword Succeeds 60s 2s Clean Up Objects ${ATT_WHITELIST}
+ Sleep 20s
+ Wait Until Keyword Succeeds 30s 2s Validate Subscriber Count 0
+ Wait Until Keyword Succeeds 60s 2s Clean Up Objects ${VOLT_DEVICE}
+ Wait Until Keyword Succeeds 60s 2s Clean Up Objects ${ATT_SERVICEINSTANCES}
+ Wait Until Keyword Succeeds 120s 10s Check Remote System Reachability False ${olt_ip}
+ Wait Until Keyword Succeeds 120s 10s Check Remote System Reachability True ${olt_ip}
+ Wait Until Keyword Succeeds 120s 10s Openolt is Up ${olt_ip} ${olt_user} ${olt_pass}
+
+Create Whitelist
+ ${AttWhiteListDict}= utils.listToDict ${AttWhiteListList} 0
+ CORD Post ${ATT_WHITELIST} ${AttWhiteListDict}
+
+Remove Whitelist
+ ${whitelist_id}= Retrieve Whitelist Entry ${onu_device}
+ CORD Delete ${ATT_WHITELIST} ${whitelist_id}
+
+Update Whitelist with Wrong Location
+ ${whitelist_id}= Retrieve Whitelist Entry ${onu_device}
+ CORD Put ${ATT_WHITELIST} {"pon_port_id": 55 } ${whitelist_id}
+
+Update Whitelist with Correct Location
+ ${whitelist_id}= Retrieve Whitelist Entry ${onu_device}
+ CORD Put ${ATT_WHITELIST} {"pon_port_id": ${onu_location} } ${whitelist_id}
+
+Create Subscriber
+ ${SubscriberDict}= utils.listToDict ${SubscriberList} 0
+ Wait Until Keyword Succeeds 120s 15s CORD Post ${VOLT_SUBSCRIBER} ${SubscriberDict}
+
+Remove Subscriber
+ ${subscriber_id}= Retrieve Subscriber ${c_tag}
+ CORD Delete ${VOLT_SUBSCRIBER} ${subscriber_id}
+
+Create VOLT
+ CORD Post ${VOLT_DEVICE} ${VoltDeviceDict}