diff --git a/Jenkinsfile-attworkflow b/Jenkinsfile-attworkflow
new file mode 100644
index 0000000..e7e1825
--- /dev/null
+++ b/Jenkinsfile-attworkflow
@@ -0,0 +1,247 @@
+// Copyright 2017-present Open Networking Foundation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+pod_config = null
+
+node ("${TestNodeName}") {
+    timeout (time: 240) {
+        stage ("Parse deployment configuration file") {
+            sh returnStdout: true, script: 'rm -rf ${configRepoBaseDir}'
+            sh returnStdout: true, script: 'git clone -b ${branch} ${configRepoUrl}'
+            deployment_config = readYaml file: "${configRepoBaseDir}${configRepoFile}"
+        }
+        stage('Export pod config') {
+            timeout(10) {
+                try {
+                    sh """
+                    cd /home/cord
+                    rm -rf /home/cord/helm-charts
+                    git clone -b ${branch} https://gerrit.opencord.org/helm-charts
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    kubectl get pods
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+        stage('Clean up') {
+            timeout(10) {
+                try {
+                    sh """
+                    cd /home/cord/helm-charts
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    helm ls | grep onos-voltha && helm delete --purge onos-voltha || true
+                    helm ls | grep onos-fabric && helm delete --purge onos-fabric || true
+                    helm ls | grep voltha && helm delete --purge voltha || true
+                    helm ls | grep rcord-lite && helm delete --purge rcord-lite || true
+                    helm ls | grep xos-core && helm delete --purge xos-core || true
+                    helm ls | grep cord-kafka && helm delete --purge cord-kafka || true
+                    helm ls | grep voltha-kafka && helm delete --purge voltha-kafka || true
+                    helm ls | grep att-workflow && helm delete --purge att-workflow || true
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+                // Wait for helm delete
+                timeout(5) {
+                    waitUntil {
+                        try {
+                            sh """
+                            export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                            ! helm ls | grep -E 'onos-voltha|onos-fabric|voltha |rcord-lite|xos-core|cord-kafka|voltha-kafka'
+                            ! kubectl get pods --all-namespaces | grep -E 'onos-voltha|onos-fabric|cord-kafka|voltha |rcord-lite-|xos-'
+                            """
+                            return true
+                        } catch (exception) {
+                            return false
+                        }
+                    }
+                }
+            }
+        }
+        stage('Restart OLT processes') {
+            timeout(5) {
+                    sh """
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    sshpass -p onl ssh -l root 10.192.4.218 'pkill bal_core_dist || true'
+                    sshpass -p onl ssh -l root 10.192.4.218 'pkill openolt || true'
+                    sshpass -p onl ssh -l root 10.192.4.218 'cd /broadcom; ./bal_core_dist -C :55001 < /dev/tty1 > ./bal.log 2>&1 &'
+                    sshpass -p onl ssh -l root 10.192.4.218 'cd /broadcom; ./openolt -C 127.0.0.1:55001 < /dev/tty1 > ./openolt.log 2>&1 &'
+                    """
+            }
+            timeout(15) {
+                            waitUntil {
+                                onu_discovered = sh returnStdout: true, script: "sshpass -p onl ssh -l root 10.192.4.218 'cat /broadcom/openolt.log | grep \"onu discover indication\" | wc -l'"
+                                return onu_discovered.toInteger() > 0
+                            }
+                        }
+                    }
+                }
+        }
+        stage('Install Kafka') {
+            timeout(10) {
+                try {
+                    sh """
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    cd /home/cord/helm-charts
+                    helm install --name cord-kafka --set replicas=1 --set persistence.enabled=false --set zookeeper.servers=1 --set zookeeper.persistence.enabled=false incubator/kafka
+                    helm install --name voltha-kafka --set replicas=1 --set persistence.enabled=false --set zookeeper.servers=1 --set zookeeper.persistence.enabled=false incubator/kafka
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+        stage('Install xos-core') {
+            timeout(10) {
+                try {
+                    sh """
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    cd /home/cord/helm-charts
+                    helm dep update xos-core
+                    helm install -n xos-core xos-core
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+        stage('Install voltha') {
+            timeout(10) {
+                try {
+                    sh """
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    cd /home/cord/helm-charts
+                    helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com/
+                    helm dep build voltha
+                    helm install -n voltha --set etcd-operator.customResources.createEtcdClusterCRD=false voltha
+                    helm upgrade --set etcd-operator.customResources.createEtcdClusterCRD=true voltha ./voltha
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+        stage('Install ONOS-Voltha and ONOS-Fabric') {
+            timeout(10) {
+                try {
+                    sh """
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    cd /home/cord/helm-charts
+                    helm install -n onos-fabric -f configs/onos-fabric.yaml onos
+                    helm install -n onos-voltha -f configs/onos-voltha.yaml onos
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+        stage('Install ATT Workflow') {
+            timeout(10) {
+                try {
+                    sh """
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    cd /home/cord/helm-charts
+                    helm install -n att-workflow xos-profiles/att-workflow
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+        stage('Wait for PODs to complete') {
+            timeout(5) {
+                waitUntil {
+                    try {
+                        sh """
+                        export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                        kubectl get pods | grep -i tosca-loader | grep -i complete
+                        kubectl get pods | grep -i chameleon | grep -i running
+                        kubectl get pods | grep -i onos-fabric | grep -i running
+                        kubectl get pods | grep -i cord-kafka | grep -i running
+                        kubectl get pods | grep -i voltha-kafka | grep -i running
+                        kubectl get pods --namespace=voltha | grep -i voltha- | grep -i running
+                        kubectl get pods --namespace=voltha | grep -i onos-voltha | grep -i running
+                        """
+                        return true
+                    } catch (exception) {
+                        return false
+                    }
+                }
+            }
+        }
+        stage('Download cord-tester repo') {
+            timeout(10) {
+                try {
+                    sh """
+                    rm -rf /home/cord/cord-tester
+                    cd /home/cord/
+                    git clone -b ${branch} https://gerrit.opencord.org/cord-tester 
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+        stage('Validate installed PODs') {
+            timeout(10) {
+                try {
+                    sh """
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    cd /home/cord/cord-tester/src/test/robot/
+                    rm -rf Log/ || true
+                    pybot -d Log -T SanityK8POD.robot || true
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+       /* stage('Configurations and Tests') {
+             timeout(10) {
+                try {
+                    sh """
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    cd /home/cord/cord-tester/src/test/cord-api/Properties/
+                    sed -i \"s/^\\(SERVER_IP = \\).*/\\1\'${deployment_config.node1.ip}\'/\" RestApiProperties.py
+                    sed -i \"s/^\\(SERVER_PORT = \\).*/\\1\'30006\'/\" RestApiProperties.py
+                    sed -i \"s/^\\(XOS_USER = \\).*/\\1\'admin@opencord.org\'/\" RestApiProperties.py
+                    sed -i \"s/^\\(XOS_PASSWD = \\).*/\\1\'letmein\'/\" RestApiProperties.py
+                    cd /home/cord/cord-tester/src/test/cord-api/Tests/
+                    rm -rf Log/ || true
+                    pybot -d Log -T FabricConfig.txt || true
+                    pybot -d Log -T AttWorkFlowDriver.txt || true
+                    sleep 5
+                    pybot -d Log -T OSSVolt.txt || true
+                    pybot -d Log -T RealOLT_Test.txt || true
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+        stage('Subscriber Validation and Ping Tests') {
+             timeout(20) {
+                try {
+                    sh """
+                    export KUBECONFIG=/home/cord/${deployment_config.pod_config}
+                    cd /home/cord/cord-tester/src/test/cord-api/Tests/
+                    pybot -d Log -T -v src_ip:${deployment_config.srcHost.ip} -v src_user:${deployment_config.srcHost.user} -v src_pass:${deployment_config.srcHost.pass} -v dst_user:${deployment_config.dstHost.user} -v dst_pass:${deployment_config.dstHost.pass} -v dst_ip:${deployment_config.dstHost.ip} -v dst_host_ip:${deployment_config.dstHost.hostIp} -v src_gateway:${deployment_config.srcHost.gateway} -v dst_gateway:${deployment_config.dstHost.gateway} -v ENABLE_STATUS:FAIL -v MACIP_STATUS:PASS Subscriber_StatusChecks.txt || true
+                    """
+                } catch(error) { currentBuild.result = 'FAILURE' }
+            }
+        }
+        stage('Publish') {
+            try {
+                sh """
+                if [ -d RobotLogs ]; then rm -r RobotLogs; fi; mkdir RobotLogs;
+                mkdir RobotLogs/TestDoc || true
+                cp -r /home/cord/cord-tester/src/test/robot/Log/* ./RobotLogs || true
+                cp -r /home/cord/cord-tester/src/test/cord-api/Tests/Log/* ./RobotLogs || true
+                """
+                step([$class: 'RobotPublisher',
+                    disableArchiveOutput: false,
+                    logFileName: 'RobotLogs/log*.html',
+                    otherFiles: '',
+                    outputFileName: 'RobotLogs/output*.xml',
+                    outputPath: '.',
+                    passThreshold: 100,
+                    reportFileName: 'RobotLogs/report*.html',
+                    unstableThreshold: 0])
+            } catch(error) {}
+        }*/
+        //step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false])
+    }
+}
diff --git a/src/test/cord-api/Tests/AttWorkFlowDriver.txt b/src/test/cord-api/Tests/AttWorkFlowDriver.txt
new file mode 100644
index 0000000..c0ac9c0
--- /dev/null
+++ b/src/test/cord-api/Tests/AttWorkFlowDriver.txt
@@ -0,0 +1,51 @@
+*** Settings ***
+Documentation     Test to Configure ATT Work flow driver
+Suite Setup       Read InputFile
+Test Template     Configuring ATT Driver
+Library           Collections
+Library           String
+Library           OperatingSystem
+Library           XML
+Library           RequestsLibrary
+Library           ../Framework/utils/utils.py
+Library           ../Framework/restApi.py
+
+*** Variables ***
+${PATHFILE}       ${CURDIR}/data/AttWorkFlowDriver.json
+
+*** Test Cases ***    TYPE                         LISTINDEX
+Test Create AttWorkFlow-1
+                      CREATE                       0
+Test Get AttWorkFlow-1
+                      RETRIEVE                     0
+
+*** Keywords ***
+Read InputFile
+    ${AttWorkFlowList}=    utils.jsonToList    ${PATHFILE}   AttWorkFlowDriverInfo 
+    Set Suite Variable    ${slist}    ${AttWorkFlowList}
+    Set Global Variable    ${AttWorkFlowDriver_Id}    ${EMPTY}
+
+Configuring ATT Driver
+    [Arguments]    ${type}    ${listIndex}
+    Run Keyword If    "${type}" == "CREATE"    Post ATT Driver    ${listIndex}
+    Run Keyword If    "${type}" == "RETRIEVE"    Get ATT Driver    ${listIndex}
+
+Post ATT Driver
+    [Arguments]    ${listIndex}
+    ${AttWorkFlowList} =    Get Variable Value    ${slist}
+    ${AttWorkFlowDriverDict}=    utils.listToDict    ${AttWorkFlowList}    ${listIndex}
+    ${api_result_status}    ${api_result_json}=    restApi.ApiPostReturnJson    ATT_SERVICE    ${AttWorkFlowDriverDict}
+    Should Be True    ${api_result_status}
+    ${AttWorkFlowDriver_Id}=    Get From Dictionary    ${api_result_json}    id
+    Set Global Variable    ${AttWorkFlowDriver_Id}
+
+Get ATT Driver
+    [Arguments]    ${listIndex}
+    Log    ${AttWorkFlowDriver_Id}
+    ${json_result}=    restApi.ApiChameleonGet    ATT_SERVICE    ${AttWorkFlowDriver_Id}
+    Log    ${json_result}
+    ${AttWorkFlowList} =    Get Variable Value    ${slist}
+    ${AttWorkFlowDriverDict}=    utils.listToDict    ${AttWorkFlowList}    ${listIndex}
+    Log    ${AttWorkFlowDriverDict}
+    ${test_result}=    utils.compare_dict    ${AttWorkFlowDriverDict}    ${json_result}
+    Should Be True    ${test_result}
diff --git a/src/test/cord-api/Tests/data/AttWhiteList.json b/src/test/cord-api/Tests/data/AttWhiteList.json
index cd0624a..224e700 100644
--- a/src/test/cord-api/Tests/data/AttWhiteList.json
+++ b/src/test/cord-api/Tests/data/AttWhiteList.json
@@ -1,10 +1,29 @@
 {
     "AttWhiteList" : [
     {
-            "serial_number": "",
-            "device_id" : "1",
-            "pon_port_id" : "",
+            "serial_number": "ALPHe3d1cfa7",
+            "device_id" : "of:000000000ac004da",
+            "pon_port_id" : "536870912",
+            "owner_id" : "1"
+    },
+    {
+            "serial_number": "ALPHe3d1cea3",
+            "device_id" : "of:000000000ac004da",
+            "pon_port_id" : "536870912",
+            "owner_id" : "1"
+    },
+    {
+            "serial_number": "ALPHe3d1cf84",
+            "device_id" : "of:000000000ac004da",
+            "pon_port_id" : "536870912",
+            "owner_id" : "1"
+    },
+    {
+            "serial_number": "ALPHe3d1cee9",
+            "device_id" : "of:000000000ac004da",
+            "pon_port_id" : "536870912",
             "owner_id" : "1"
     }
+
   ]
 }