diff --git a/VERSION b/VERSION
index e010258..5410937 100644
--- a/VERSION
+++ b/VERSION
@@ -1 +1 @@
-2.0.5
+2.0.6-dev
diff --git a/src/test/cord-api/Dockerfile.k8s-api-tester b/src/test/cord-api/Dockerfile.k8s-api-tester
index 1546890..1bef8c7 100644
--- a/src/test/cord-api/Dockerfile.k8s-api-tester
+++ b/src/test/cord-api/Dockerfile.k8s-api-tester
@@ -19,7 +19,7 @@
 FROM python:2.7
 
 RUN pip install httpie robotframework robotframework-requests pexpect \
-     robotframework-sshlibrary robotframework-httplibrary robotframework-ride robotframework-kafkalibrary pygments pyyaml && \
+     robotframework-sshlibrary robotframework-httplibrary robotframework-kafkalibrary pygments pyyaml && \
     pip install -U requests && rm -rf /var/lib/apt/lists/*
 
 RUN  mkdir -p /src/cord-api
diff --git a/src/test/cord-api/Tests/WorkflowValidations/SIAB.robot b/src/test/cord-api/Tests/WorkflowValidations/SIAB.robot
index de399ca..0fa0cc7 100644
--- a/src/test/cord-api/Tests/WorkflowValidations/SIAB.robot
+++ b/src/test/cord-api/Tests/WorkflowValidations/SIAB.robot
@@ -50,14 +50,9 @@
     ...    Validate successful authentication/DHCP/E2E ping
     [Setup]    None
     [Tags]    stable    latest    test1
-    Wait Until Keyword Succeeds    60s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
-    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
-    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
+    Subscriber Ready to Authenticate
     Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
-    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
-    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
-    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Service Chain    ${onu_device}    True
-    Wait Until Keyword Succeeds    60s    2s    Validate Fabric CrossConnect SI    ${s_tag}    True
+    Subscriber Service Chain Created
     Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     ${subscriber_id}=    Retrieve Subscriber    ${c_tag}
     CORD Put    ${VOLT_SUBSCRIBER}    {"status":"disabled"}    ${subscriber_id}
@@ -65,8 +60,10 @@
     Wait Until Keyword Succeeds    60s    2s    Validate Fabric CrossConnect SI    ${s_tag}    False
     Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Restart RG Pod
-    CORD Put    ${VOLT_SUBSCRIBER}    {"status":"enabled"}    ${subscriber_id}
+    CORD Put    ${VOLT_SUBSCRIBER}    {"status":"awaiting-auth"}    ${subscriber_id}
+    # ATTWD SI auth_state is already "APPROVED" here from previous auth... not sure if this matters
     Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
+    Subscriber Service Chain Created
     Validate DHCP and Ping    True    True    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
 
 ONU in Correct Location -> Remove ONU from Whitelist -> Add ONU to Whitelist
@@ -296,7 +293,6 @@
     Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Restart RG Pod
     Update Whitelist with Correct Location
-    Reset ONU
     Wait Until Keyword Succeeds    60s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
     Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
@@ -304,8 +300,7 @@
     Validate DHCP and Ping    False    False    eth0    ${s_tag}    ${c_tag}    ${dst_host_ip}    ${kube_node_ip}    ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Restart RG Pod
     Create Subscriber
-    Reset ONU
-    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
+    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}    pre-provisioned
     Validate Authentication    True    eth0    wpa_supplicant.conf    ${kube_node_ip}     ${local_user}    ${local_pass}    K8S    ${RG_CONTAINER}
     Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
@@ -366,27 +361,34 @@
 Setup Test
     ${datetime}=    Get Current Datetime On Kubernetes Node    ${kube_node_ip}     ${local_user}    ${local_pass}
     Set Suite Variable    ${datetime}
-    Wait Until Keyword Succeeds    60s    2s    Create Whitelist
     Wait Until Keyword Succeeds    60s    2s    Create Subscriber
-    Reset ONU
-    Wait Until Keyword Succeeds    120s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
-    Wait Until Keyword Succeeds    120s    2s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
+    Wait Until Keyword Succeeds    60s    2s    Create Whitelist
+    Subscriber Ready to Authenticate
+
+Subscriber Ready to Authenticate
+    Wait Until Keyword Succeeds    60s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
+    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
-    ${RG_CONTAINER}=    Run    kubectl -n voltha get pod|grep "^rg-"|cut -d' ' -f1
-    Set Suite Variable    ${RG_CONTAINER}
+
+Subscriber Service Chain Created
+    Wait Until Keyword Succeeds    60s    2s    Validate ATT Workflow Driver SI    ENABLED    APPROVED    ${onu_device}
+    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    enabled    ${onu_device}
+    Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Service Chain    ${onu_device}    True
+    Wait Until Keyword Succeeds    60s    2s    Validate Fabric CrossConnect SI    ${s_tag}    True
 
 Simple Setup
     ${datetime}=    Get Current Datetime On Kubernetes Node    ${kube_node_ip}     ${local_user}    ${local_pass}
     Set Suite Variable    ${datetime}
     ${RG_CONTAINER}=    Run    kubectl -n voltha get pod|grep "^rg-"|cut -d' ' -f1
     Set Suite Variable    ${RG_CONTAINER}
-    Reset ONU
 
 Test Cleanup
     [Documentation]    Restore back to initial state per each test
     Log Kubernetes Containers Logs Since Time    ${datetime}    ${container_list}
     Wait Until Keyword Succeeds    60s    2s    Clean Up Objects    ${VOLT_SUBSCRIBER}
     Wait Until Keyword Succeeds    60s    2s    Clean Up Objects    ${ATT_WHITELIST}
+    Wait Until Keyword Succeeds    30s    2s    Validate ONU States    UNKNOWN    DISABLED    ${onu_device}
+    Wait Until Keyword Succeeds    30s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
     Restart RG Pod
 
 Restart RG Pod
@@ -427,18 +429,13 @@
 Reset SIAB Environment
     Wait Until Keyword Succeeds    60s    2s    Clean Up Objects    ${VOLT_SUBSCRIBER}
     Wait Until Keyword Succeeds    60s    2s    Clean Up Objects    ${ATT_WHITELIST}
+    Wait Until Keyword Succeeds    30s    2s    Validate ONU States    UNKNOWN    DISABLED    ${onu_device}
+    Wait Until Keyword Succeeds    30s    2s    Validate ATT Workflow Driver SI    DISABLED    AWAITING    ${onu_device}
     Restart RG Pod
-    Wait Until Keyword Succeeds    60s    2s    Create Whitelist
     Wait Until Keyword Succeeds    60s    2s    Create Subscriber
-    Reset ONU
+    Wait Until Keyword Succeeds    60s    2s    Create Whitelist
     Wait Until Keyword Succeeds    120s    2s    Validate ATT Workflow Driver SI    ENABLED    AWAITING    ${onu_device}
     Wait Until Keyword Succeeds    60s    15s    Validate ONU States    ACTIVE    ENABLED    ${onu_device}
     Wait Until Keyword Succeeds    60s    2s    Validate Subscriber Status    awaiting-auth    ${onu_device}
     ${RG_CONTAINER}=    Run    kubectl -n voltha get pod|grep "^rg-"|cut -d' ' -f1
     Set Suite Variable    ${RG_CONTAINER}
-
-Reset ONU
-    CORD Put    /xosapi/v1/volt/onudevices   {"admin_state": "DISABLED" }     1
-    Sleep    10
-    CORD Put    /xosapi/v1/volt/onudevices   {"admin_state": "ENABLED" }     1
-    Sleep    10