| # Copyright 2017-present Open Networking Foundation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| *** Settings *** |
| Documentation Test various end-to-end scenarios with ATT workflow |
| Suite Setup Setup Suite |
| Suite Teardown Teardown Suite |
| Test Setup Setup Test |
| Test Teardown Teardown Test |
| Library Collections |
| Library String |
| Library OperatingSystem |
| Library XML |
| Library RequestsLibrary |
| Library ../../Framework/utils/utils.py |
| Resource ../../Framework/utils/utils.robot |
| Library ../../Framework/restApi.py |
| Resource ../../Framework/Subscriber.robot |
| Resource ../../Framework/ATTWorkFlowDriver.robot |
| Resource ../../Framework/Kubernetes.robot |
| Resource ../../Framework/ONU.robot |
| Resource ../../Framework/OLT.robot |
| Resource ../../Framework/DHCP.robot |
| Variables ../../Properties/RestApiProperties.py |
| |
| *** Variables *** |
| ${POD_NAME} flex-pod1-olt |
| ${KUBERNETES_CONFIGS_DIR} ~/pod-configs/kubernetes-configs |
| ${HELM_CHARTS_DIR} ~/helm-charts |
| ${WHITELIST_PATHFILE} ${CURDIR}/data/${POD_NAME}/ATTWhiteList.json |
| ${SUBSCRIBER_PATHFILE} ${CURDIR}/data/${POD_NAME}/ATTSubscriber.json |
| ${VOLT_DEVICE_PATHFILE} ${CURDIR}/data/${POD_NAME}/RealOLTDevice.json |
| ${KUBERNETES_CONF} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.conf |
| ${KUBERNETES_YAML} ${KUBERNETES_CONFIGS_DIR}/${POD_NAME}.yml |
| ${VOLTHA_POD_NUM} 8 |
| |
| *** Test Cases *** |
| ONU in Correct Location |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Configure whitelist with correct ONU location |
| ... Validate successful authentication/DHCP/E2E ping |
| [Setup] None |
| [Tags] test1 |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device} |
| Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device} |
| Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| |
| ONU in Correct Location -> Remove ONU from Whitelist -> Add ONU to Whitelist |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Configure whitelist with correct ONU location |
| ... Validate successful authentication/DHCP/E2E ping |
| ... Remove ONU from whitelist |
| ... Validate failed authentication/DHCP/E2E ping |
| ... Add ONU to whitelist |
| ... Validate successful authentication/DHCP/E2E ping |
| [Tags] test2 |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device} |
| Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device} |
| Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| Clean Up Linux |
| Remove Whitelist |
| Wait Until Keyword Succeeds 60s 2s Validate ONU States UNKNOWN DISABLED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device} |
| Validate Authentication False ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| Clean Up Linux |
| Create Whitelist |
| Wait Until Keyword Succeeds 120s 5s Validate ONU States ACTIVE ENABLED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device} |
| Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device} |
| Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| |
| ONU in Correct Location -> ONU in Wrong Location -> ONU in Correct Location |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Configure whitelist with correct ONU location |
| ... Validate successful authentication/DHCP/E2E ping |
| ... Update whitelist with wrong ONU location |
| ... Validate failed authentication/DHCP/E2E ping |
| ... Update whitelist with correct ONU location |
| ... Validate successful authentication/DHCP/E2E ping |
| [Tags] test3 |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device} |
| Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device} |
| Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| Clean Up Linux |
| Update Whitelist with Wrong Location |
| Wait Until Keyword Succeeds 60s 2s Validate ONU States UNKNOWN DISABLED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device} |
| Validate Authentication False ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| Clean Up Linux |
| Update Whitelist with Correct Location |
| Wait Until Keyword Succeeds 120s 5s Validate ONU States ACTIVE ENABLED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device} |
| Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device} |
| Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| |
| ONU in Correct Location -> Remove Subscriber -> Create Subscriber |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Configure whitelist with correct ONU location |
| ... Validate successful authentication/DHCP/E2E ping |
| ... Remove subscriber model |
| ... Validate successful authentication (expected with the ONF pod setup) but failed DHCP/E2E ping |
| ... Recreate subscriber model |
| ... Validate successful authentication/DHCP/E2E ping |
| [Tags] test4 |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device} |
| Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device} |
| Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| Clean Up Linux |
| Remove Subscriber |
| Sleep 10s |
| Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| Clean Up Linux |
| Create Subscriber |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status pre-provisioned ${onu_device} |
| Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device} |
| Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| |
| ONU in Correct Location (Skip Subscriber Provisioning) -> Provision Subscriber |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Configure whitelist with correct ONU location and skip provisioning subscriber |
| ... Validate successful authentication (expected with the ONF pod setup) but failed DHCP/E2E ping |
| ... Provision subscriber |
| ... Validate successful authentication/DHCP/E2E ping |
| [Setup] None |
| [Tags] test5 |
| Create Whitelist |
| Create VOLT |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device} |
| Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device} |
| Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| Clean Up Linux |
| Create Subscriber |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status pre-provisioned ${onu_device} |
| Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device} |
| Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| |
| ONU in Correct Location (Skip Authentication) |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Configure whitelist with correct ONU location and skip RG authentication |
| ... Validate failed authentication/DHCP/E2E ping |
| [Tags] test6 |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States ACTIVE ENABLED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device} |
| Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| |
| ONU not in Whitelist |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Skip whitelist configuration for ONU |
| ... Validate failed authentication/DHCP/E2E ping |
| [Setup] None |
| [Tags] test7 |
| Create Subscriber |
| Create VOLT |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States UNKNOWN DISABLED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device} |
| Validate Authentication False ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device} |
| Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| |
| ONU not in Whitelist (Skip Subscriber Provisioning) -> Add ONU to Whitelist -> Provision Subscriber |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Skip whitelist configuration for ONU and subscriber provisioning |
| ... Validate successful authentication but failed DHCP/E2E ping |
| ... Configure whitelist with correct ONU location |
| ... Validate successful authentication (expected with the ONF pod setup) but failed DHCP/E2E ping |
| ... Provision subscriber |
| ... Validate successful authentication/DHCP/E2E ping |
| [Setup] None |
| [Tags] test8 |
| Create VOLT |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States UNKNOWN DISABLED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device} |
| Validate Authentication False ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device} |
| Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| Clean Up Linux |
| Create Whitelist |
| Wait Until Keyword Succeeds 60s 2s Validate ONU States ACTIVE ENABLED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device} |
| Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device} |
| Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| Clean Up Linux |
| Create Subscriber |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status pre-provisioned ${onu_device} |
| Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device} |
| Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| |
| ONU in Wrong Location |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Configure whitelist with wrong ONU location |
| ... Validate failed authentication/DHCP/E2E ping |
| [Tags] test9 |
| Update Whitelist with Wrong Location |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States UNKNOWN DISABLED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device} |
| Validate Authentication False ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status awaiting-auth ${onu_device} |
| Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| |
| ONU in Wrong Location (Skip Subscriber Provisioning) -> ONU in Correct Location -> Provision Subscriber |
| [Documentation] Validates E2E Ping Connectivity and object states for the given scenario: |
| ... Configure whitelist with wrong ONU location and skip subscriber provisioning |
| ... Validate failed authentication/DHCP/E2E ping |
| ... Configure whitelist with correct ONU location |
| ... Validate successful authentication (expected with the ONF pod setup) but failed DHCP/E2E ping |
| ... Provision subscriber |
| ... Validate successful authentication/DHCP/E2E ping |
| [Setup] None |
| [Tags] test10 |
| Create VOLT |
| Create Whitelist |
| Update Whitelist with Wrong Location |
| Wait Until Keyword Succeeds 300s 15s Validate ONU States UNKNOWN DISABLED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device} |
| Validate Authentication False ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI DISABLED AWAITING ${onu_device} |
| Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| Clean Up Linux |
| Update Whitelist with Correct Location |
| Wait Until Keyword Succeeds 60s 2s Validate ONU States ACTIVE ENABLED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED AWAITING ${onu_device} |
| Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device} |
| Validate DHCP and Ping False False ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| Clean Up Linux |
| Create Subscriber |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status pre-provisioned ${onu_device} |
| Validate Authentication True ${src_iface} wpa_supplicant.conf ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Wait Until Keyword Succeeds 60s 2s Validate ATT Workflow Driver SI ENABLED APPROVED ${onu_device} |
| Wait Until Keyword Succeeds 60s 2s Validate Subscriber Status enabled ${onu_device} |
| Validate DHCP and Ping True True ${src_iface} ${s_tag} ${c_tag} ${dst_dp_ip} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} ${dst_dp_iface} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| |
| *** Keywords *** |
| Setup Suite |
| ${auth} = Create List ${XOS_USER} ${XOS_PASSWD} |
| ${HEADERS} Create Dictionary Content-Type=application/json |
| Create Session ${server_ip} http://${server_ip}:${server_port} auth=${AUTH} headers=${HEADERS} |
| ${att_workflow_service_id}= Get Service Owner Id ${ATT_SERVICE} |
| ${volt_service_id}= Get Service Owner Id ${VOLT_SERVICE} |
| ${AttWhiteListList}= utils.jsonToList ${WHITELIST_PATHFILE} AttWhiteListInfo |
| Set Suite Variable ${AttWhiteListList} |
| ${AttWhiteListDict}= utils.listToDict ${AttWhiteListList} 0 |
| ${AttWhiteListDict}= utils.setFieldValueInDict ${AttWhiteListDict} owner_id ${att_workflow_service_id} |
| ${onu_device}= Get From Dictionary ${AttWhiteListDict} serial_number |
| Set Global Variable ${onu_device} |
| ${onu_location}= Get From Dictionary ${AttWhiteListDict} pon_port_id |
| Set Global Variable ${onu_location} |
| ${SubscriberList}= utils.jsonToList ${SUBSCRIBER_PATHFILE} SubscriberInfo |
| Set Global Variable ${SubscriberList} |
| ${SubscriberDict}= utils.listToDict ${SubscriberList} 0 |
| ${s_tag}= utils.getFieldValueFromDict ${SubscriberDict} s_tag |
| ${c_tag}= utils.getFieldValueFromDict ${SubscriberDict} c_tag |
| ${VoltDeviceList}= utils.jsonToList ${VOLT_DEVICE_PATHFILE} VOLTDeviceInfo |
| ${VoltDeviceDict}= utils.setFieldValueInDict ${VoltDeviceList[0]} volt_service_id ${volt_service_id} |
| Set Global Variable ${VoltDeviceList} |
| Set Global Variable ${VoltDeviceDict} |
| Set Suite Variable ${s_tag} |
| Set Suite Variable ${c_tag} |
| Set Global Variable ${export_kubeconfig} export KUBECONFIG=${KUBERNETES_CONF} |
| # Read variables from yaml file |
| ${src_ip}= Evaluate ${hosts}.get("src").get("ip") |
| ${src_user}= Evaluate ${hosts}.get("src").get("user") |
| ${src_pass}= Evaluate ${hosts}.get("src").get("pass") |
| ${src_container_type}= Evaluate ${hosts}.get("src").get("container_type") |
| ${src_container_name}= Evaluate ${hosts}.get("src").get("container_name") |
| ${src_iface}= Evaluate ${hosts}.get("src").get("dp_iface_name") |
| ${dst_ip}= Evaluate ${hosts}.get("dst").get("ip") |
| ${dst_user} = Evaluate ${hosts}.get("dst").get("user") |
| ${dst_pass}= Evaluate ${hosts}.get("dst").get("pass") |
| ${dst_container_type}= Evaluate ${hosts}.get("dst").get("container_type") |
| ${dst_container_name}= Evaluate ${hosts}.get("dst").get("container_name") |
| ${dst_dp_iface}= Evaluate ${hosts}.get("dst").get("dp_iface_name") |
| ${dst_dp_ip}= Evaluate ${hosts}.get("dst").get("dp_iface_ip_qinq") |
| ${olt_ip}= Evaluate ${olts}[0].get("ip") |
| ${olt_user}= Evaluate ${olts}[0].get("user") |
| ${olt_pass}= Evaluate ${olts}[0].get("pass") |
| ${k8s_node_ip}= Evaluate ${nodes}[0].get("ip") |
| ${k8s_node_user}= Evaluate ${nodes}[0].get("user") |
| ${k8s_node_pass}= Evaluate ${nodes}[0].get("pass") |
| Set Suite Variable ${src_ip} |
| Set Suite Variable ${src_user} |
| Set Suite Variable ${src_pass} |
| Set Suite Variable ${src_container_type} |
| Set Suite Variable ${src_container_name} |
| Set Suite Variable ${src_iface} |
| Set Suite Variable ${dst_ip} |
| Set Suite Variable ${dst_user} |
| Set Suite Variable ${dst_pass} |
| Set Suite Variable ${dst_container_type} |
| Set Suite Variable ${dst_container_name} |
| Set Suite Variable ${dst_dp_iface} |
| Set Suite Variable ${dst_dp_ip} |
| Set Suite Variable ${olt_ip} |
| Set Suite Variable ${olt_user} |
| Set Suite Variable ${olt_pass} |
| Set Suite Variable ${k8s_node_ip} |
| Set Suite Variable ${k8s_node_user} |
| Set Suite Variable ${k8s_node_pass} |
| @{container_list}= Create List |
| Append To List ${container_list} att-workflow-att-workflow-driver |
| Append To List ${container_list} seba-services-volt |
| Append To List ${container_list} seba-services-rcord |
| Append To List ${container_list} seba-services-onos |
| Append To List ${container_list} seba-services-fabric-crossconnect |
| Append To List ${container_list} xos-core |
| Append To List ${container_list} vcore |
| Set Suite Variable ${container_list} |
| ${datetime}= Get Current Datetime On Kubernetes Node ${k8s_node_ip} ${k8s_node_user} ${k8s_node_pass} |
| Set Suite Variable ${datetime} |
| |
| Teardown Suite |
| [Documentation] Performs any additional cleanup required |
| Log Suite Teardown cleanup |
| Delete All Sessions |
| |
| Setup Test |
| [Documentation] Re-create Subscriber, whitelist, and olt-device models to test |
| Log Re-creating objects |
| ${datetime}= Get Current Datetime On Kubernetes Node ${k8s_node_ip} ${k8s_node_user} ${k8s_node_pass} |
| Create Whitelist |
| Create Subscriber |
| Create VOLT |
| Wait Until Keyword Succeeds 200s 15s Validate OLT States ACTIVE ENABLED ${olt_ip} |
| |
| Teardown Test |
| [Documentation] Delete xos objects, kills processes and cleans up interfaces on src+dst servers |
| Clean Up Linux |
| Clean Up XOS |
| Log Kubernetes Containers Logs Since Time ${datetime} ${container_list} |
| |
| Clean Up Linux |
| [Documentation] Kill processes and clean up interfaces on src+dst servers |
| Run Keyword And Ignore Error Kill Linux Process [w]pa_supplicant ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Run Keyword And Ignore Error Kill Linux Process [d]hclient ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Run Keyword If '${dst_ip}' != '${None}' Run Keyword And Ignore Error Kill Linux Process [d]hcpd ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| Delete IP Addresses from Interface on Remote Host ${src_iface} ${src_ip} ${src_user} ${src_pass} ${src_container_type} ${src_container_name} |
| Run Keyword If '${dst_ip}' != '${None}' Delete Interface on Remote Host ${dst_dp_iface}.${s_tag} ${dst_ip} ${dst_user} ${dst_pass} ${dst_container_type} ${dst_container_name} |
| |
| Clean Up XOS |
| [Documentation] Clean up all XOS objects and reinstall voltha after OLT reboots |
| Wait Until Keyword Succeeds 60s 2s Clean Up Objects ${VOLT_SUBSCRIBER} |
| Wait Until Keyword Succeeds 60s 2s Clean Up Objects ${ATT_WHITELIST} |
| Sleep 20s |
| Wait Until Keyword Succeeds 30s 2s Validate Subscriber Count 0 |
| Wait Until Keyword Succeeds 60s 2s Clean Up Objects ${VOLT_DEVICE} |
| Wait Until Keyword Succeeds 60s 2s Clean Up Objects ${ATT_SERVICEINSTANCES} |
| Wait Until Keyword Succeeds 120s 10s Check Remote System Reachability False ${olt_ip} |
| Wait Until Keyword Succeeds 120s 10s Check Remote System Reachability True ${olt_ip} |
| Wait Until Keyword Succeeds 120s 10s Openolt is Up ${olt_ip} ${olt_user} ${olt_pass} |
| |
| Create Whitelist |
| ${AttWhiteListDict}= utils.listToDict ${AttWhiteListList} 0 |
| CORD Post ${ATT_WHITELIST} ${AttWhiteListDict} |
| |
| Remove Whitelist |
| ${whitelist_id}= Retrieve Whitelist Entry ${onu_device} |
| CORD Delete ${ATT_WHITELIST} ${whitelist_id} |
| |
| Update Whitelist with Wrong Location |
| ${whitelist_id}= Retrieve Whitelist Entry ${onu_device} |
| CORD Put ${ATT_WHITELIST} {"pon_port_id": 55 } ${whitelist_id} |
| |
| Update Whitelist with Correct Location |
| ${whitelist_id}= Retrieve Whitelist Entry ${onu_device} |
| CORD Put ${ATT_WHITELIST} {"pon_port_id": ${onu_location} } ${whitelist_id} |
| |
| Create Subscriber |
| ${SubscriberDict}= utils.listToDict ${SubscriberList} 0 |
| Wait Until Keyword Succeeds 120s 15s CORD Post ${VOLT_SUBSCRIBER} ${SubscriberDict} |
| |
| Remove Subscriber |
| ${subscriber_id}= Retrieve Subscriber ${c_tag} |
| CORD Delete ${VOLT_SUBSCRIBER} ${subscriber_id} |
| |
| Create VOLT |
| CORD Post ${VOLT_DEVICE} ${VoltDeviceDict} |