blob: da6fb3d1b672a2cbd2a30ad85a72c87dbd50235e [file] [log] [blame]
Kailash Khalasi164dc142018-09-14 11:49:08 -07001// Copyright 2017-present Open Networking Foundation
2//
3// Licensed under the Apache License, Version 2.0 (the "License");
4// you may not use this file except in compliance with the License.
5// You may obtain a copy of the License at
6//
7// http://www.apache.org/licenses/LICENSE-2.0
8//
9// Unless required by applicable law or agreed to in writing, software
10// distributed under the License is distributed on an "AS IS" BASIS,
11// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12// See the License for the specific language governing permissions and
13// limitations under the License.
14
15node ("${TestNodeName}") {
16 timeout (100) {
17 try {
18 stage ("Parse deployment configuration file") {
19 sh returnStdout: true, script: "rm -rf ${configBaseDir}"
20 sh returnStdout: true, script: "git clone -b ${branch} ${cordRepoUrl}/${configBaseDir}"
21 deployment_config = readYaml file: "${configBaseDir}/${configDeploymentDir}/${configFileName}.yml"
22 }
23 stage('Clean up') {
24 timeout(10) {
25 sh returnStdout: true, script: """
26 rm -rf helm-charts cord-tester
27 git clone -b ${branch} ${cordRepoUrl}/helm-charts
28 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
29 for hchart in \$(helm list -q | grep -E -v 'docker-registry|mavenrepo|ponnet');
30 do
31 echo "Purging chart: \${hchart}"
32 helm delete --purge "\${hchart}"
33 done
34 """
35 timeout(5) {
36 waitUntil {
37 helm_deleted = sh returnStdout: true, script: """
38 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
39 helm ls -q | grep -E -v 'docker-registry|mavenrepo|ponnet' | wc -l
40 """
41 return helm_deleted.toInteger() == 0
42 }
43 }
44 timeout(5) {
45 waitUntil {
46 kubectl_deleted = sh returnStdout: true, script: """
47 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
48 kubectl get pods --all-namespaces --no-headers | grep -E -v 'kube-system|docker-registry|mavenrepo|ponnet' | wc -l
49 """
50 return kubectl_deleted.toInteger() == 0
51 }
52 }
53 }
54 }
55 dir ("helm-charts") {
56 stage('Install Voltha Kafka') {
57 timeout(10) {
58 sh returnStdout: true, script: """
59 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
60 helm install --name voltha-kafka --set replicas=1 --set persistence.enabled=false --set zookeeper.replicaCount=1 --set zookeeper.persistence.enabled=false incubator/kafka
61 """
62 }
63 timeout(10) {
64 waitUntil {
65 kafka_instances_running = sh returnStdout: true, script: """
66 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
67 kubectl get pods | grep voltha-kafka | grep -i running | grep 1/1 | wc -l
68 """
69 return kafka_instances_running.toInteger() == 2
70 }
71 }
72 }
73 stage('Install voltha') {
74 timeout(10) {
75 sh returnStdout: true, script: """
76 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
77 helm repo add incubator https://kubernetes-charts-incubator.storage.googleapis.com/
78 helm dep build voltha
79 helm install -n voltha -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --set etcd-operator.customResources.createEtcdClusterCRD=false voltha
80 helm upgrade -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml --set etcd-operator.customResources.createEtcdClusterCRD=true voltha ./voltha
81 """
82 }
83 timeout(10) {
84 waitUntil {
85 voltha_completed = sh returnStdout: true, script: """
86 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
87 kubectl get pods -n voltha | grep -i running | grep 1/1 | wc -l
88 """
89 return voltha_completed.toInteger() == 8
90 }
91 }
92 }
93 stage('Install CORD Kafka') {
94 timeout(10) {
95 sh returnStdout: true, script: """
96 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
97 helm install --name cord-kafka --set replicas=1 --set persistence.enabled=false --set zookeeper.replicaCount=1 --set zookeeper.persistence.enabled=false incubator/kafka
98 """
99 }
100 timeout(10) {
101 waitUntil {
102 kafka_instances_running = sh returnStdout: true, script: """
103 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
104 kubectl get pods | grep cord-kafka | grep -i running | grep 1/1 | wc -l
105 """
106 return kafka_instances_running.toInteger() == 2
107 }
108 }
109 }
110 stage('Install ONOS') {
111 timeout(10) {
112 sh returnStdout: true, script: """
113 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
114 helm install -n onos -f configs/onos.yaml -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml onos
115 """
116 }
117 timeout(10) {
118 waitUntil {
119 onos_completed = sh returnStdout: true, script: """
120 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
121 kubectl get pods | grep -i onos | grep -i running | grep 1/1 | wc -l
122 """
123 return onos_completed.toInteger() == 1
124 }
125 }
126 }
127 stage('Install xos-core') {
128 timeout(10) {
129 sh returnStdout: true, script: """
130 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
131 helm dep update xos-core
132 helm install -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n xos-core xos-core
133 """
134 }
135 timeout(10) {
136 waitUntil {
137 xos_core_completed = sh returnStdout: true, script: """
138 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
139 kubectl get pods | grep -i xos | grep -i running | grep 1/1 | wc -l
140 """
141 return xos_core_completed.toInteger() == 7
142 }
143 }
144 }
145 stage('Install rcord-lite') {
146 timeout(10) {
147 sh returnStdout: true, script: """
148 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
149 helm dep update xos-profiles/rcord-lite
150 helm install -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n rcord-lite xos-profiles/rcord-lite
151 """
152 }
153 timeout(10) {
154 waitUntil {
155 rcord_tosca_completed = sh returnStdout: true, script: """
156 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf &&
157 kubectl get pods | grep -i tosca-loader | grep -i completed | wc -l
158 """
159 return rcord_tosca_completed.toInteger() == 1
160 }
161 }
162 }
163 stage('Install hippie-oss') {
164 timeout(10) {
165 sh returnStdout: true, script: """
166 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
167 helm install -f ../${configBaseDir}/${configKubernetesDir}/${configFileName}.yml -n hippie-oss xos-services/hippie-oss
168 """
169 }
170 timeout(10) {
171 waitUntil {
172 hippie_oss_running = sh returnStdout: true, script: """
173 export KUBECONFIG=$WORKSPACE/${configBaseDir}/${configKubernetesDir}/${configFileName}.conf
174 kubectl get pods | grep -i hippie-oss | grep -i running | grep 1/1 | wc -l
175 """
176 return hippie_oss_running.toInteger() == 1
177 }
178 }
179 }
180 }
181 stage('Reinstall OLT software') {
182 for(int i=0; i < deployment_config.olts.size(); i++) {
183 sh returnStdout: true, script: """
184 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --remove asfvolt16 && dpkg --purge asfvolt16'
185 """
186 timeout(5) {
187 waitUntil {
188 olt_sw_present = sh returnStdout: true, script: """
189 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l'
190 """
191 return olt_sw_present.toInteger() == 0
192 }
193 }
194 sh returnStdout: true, script: """
195 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} "dpkg --install ${oltDebVersion}"
196 """
197 timeout(5) {
198 waitUntil {
199 olt_sw_present = sh returnStdout: true, script: """
200 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'dpkg --list | grep asfvolt16 | wc -l'
201 """
202 return olt_sw_present.toInteger() == 1
203 }
204 }
205 // If the OLT is connected to a 40G switch interface, set the NNI port to be downgraded
206 if ("${deployment_config.olts[i].fortygig}" != null && "${deployment_config.olts[i].fortygig}" == 'true') {
207 sh returnStdout: true, script: """
208 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'echo "port ce128 sp=40000" >> /broadcom/qax.soc'
209 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '/opt/bcm68620/svk_init.sh'
210 """
211 }
212 }
213 }
214 stage('Restart OLT processes') {
215 for(int i=0; i < deployment_config.olts.size(); i++) {
216 timeout(5) {
217 sh returnStdout: true, script: """
218 ssh-keyscan -H ${deployment_config.olts[i].ip} >> ~/.ssh/known_hosts
219 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'pkill bal_core_dist' || true
220 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'pkill openolt' || true
221 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /broadcom/bal.log'
222 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} '> /broadcom/openolt.log'
223 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cd /broadcom; ./bal_core_dist -C :55001 < /dev/tty1 > ./bal.log 2>&1 &'
224 sleep 5
225 sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cd /broadcom; ./openolt -C 127.0.0.1:55001 < /dev/tty1 > ./openolt.log 2>&1 &'
226 """
227 }
228 timeout(15) {
229 waitUntil {
230 onu_discovered = sh returnStdout: true, script: "sshpass -p ${deployment_config.olts[i].pass} ssh -l ${deployment_config.olts[i].user} ${deployment_config.olts[i].ip} 'cat /broadcom/openolt.log | grep \"oper_state:up\" | wc -l'"
231 return onu_discovered.toInteger() > 0
232 }
233 }
234 }
235 }
Kailash Khalasi4d18e202018-09-14 13:32:16 -0700236 if ( params.configurePod ) {
237 dir ("${configBaseDir}/${configToscaDir}/${profile}") {
Kailash Khalasi164dc142018-09-14 11:49:08 -0700238 stage('Configure R-CORD - Fabric and whitelist') {
239 timeout(1) {
240 waitUntil {
241 out_fabric = sh returnStdout: true, script: """
Kailash Khalasi4d18e202018-09-14 13:32:16 -0700242 curl -s -H "xos-username:admin@opencord.org" -H "xos-password:letmein" -X POST --data-binary @${configFileName}-fabric.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
Kailash Khalasi164dc142018-09-14 11:49:08 -0700243 """
244 return out_fabric.toInteger() == 1
245 }
246 }
247 }
248 stage('Configure R-CORD - Subscriber') {
249 timeout(1) {
250 waitUntil {
251 out_subscriber = sh returnStdout: true, script: """
Kailash Khalasi4d18e202018-09-14 13:32:16 -0700252 curl -s -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @${configFileName}-subscriber.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
Kailash Khalasi164dc142018-09-14 11:49:08 -0700253 """
254 return out_subscriber.toInteger() == 1
255 }
256 }
257 }
258 stage('Configure R-CORD - OLT') {
259 timeout(1) {
260 waitUntil {
261 out_olt = sh returnStdout: true, script: """
Kailash Khalasi4d18e202018-09-14 13:32:16 -0700262 curl -H 'xos-username:admin@opencord.org' -H 'xos-password:letmein' -X POST --data-binary @${configFileName}-olt.yaml http://${deployment_config.nodes[0].ip}:30007/run | grep -i "created models" | wc -l
Kailash Khalasi164dc142018-09-14 11:49:08 -0700263 """
264 return out_olt.toInteger() == 1
265 }
266 }
267 }
268 }
269 }
270 currentBuild.result = 'SUCCESS'
271 } catch (err) {
272 currentBuild.result = 'FAILURE'
273 step([$class: 'Mailer', notifyEveryUnstableBuild: true, recipients: "${notificationEmail}", sendToIndividuals: false])
274 }
275 echo "RESULT: ${currentBuild.result}"
276 }
277}