src/test/setup/quagga-config/testrib.conf

!
! Zebra configuration saved from vty
!   2007/04/01 17:46:48
!
password zebra
log stdout
service advanced-vty
!
debug zebra rib
debug zebra kernel
debug zebra fpm
!
!interface eth1
! ip address 10.10.0.1/16

! statics that should be subsumed by connected routes, according to interface
! state
ip route 50.10.0.0/24 172.17.0.4
ip route 50.10.0.0/24 172.17.0.3
ip route 50.10.0.0/24 172.17.0.2
ip route 60.10.0.0/24 172.17.0.4
ip route 60.10.0.0/24 172.17.0.3
ip route 70.10.0.0/24 172.17.0.4
ip route 70.10.0.0/24 172.17.0.3
ip route 80.10.0.0/24 172.17.0.4
ip route 80.10.0.0/24 172.17.0.3
ip route 90.10.0.0/24 172.17.0.4
ip route 90.10.0.0/24 172.17.0.3
ip route 100.10.0.0/24 172.17.0.4
ip route 100.10.0.0/24 172.17.0.3
ip route 120.10.0.0/24 172.17.0.4
ip route 120.10.0.0/24 172.17.0.3
ip route 10.10.0.19/24 172.17.0.5
ip route 10.10.0.19/24 172.17.0.4
ip route 10.10.0.19/24 172.17.0.3
ip route 50.10.0.0/24 172.17.0.6
ip route 50.10.0.0/24 172.17.0.3
ip route 50.10.0.0/24 172.17.0.2
ip route 50.10.0.0/24 172.17.0.4
ip route 60.10.0.0/24 172.17.0.7
ip route 60.10.0.0/24 172.17.0.3
ip route 60.10.0.0/24 172.17.0.4
ip route 70.10.0.0/24 172.17.0.1
ip route 70.10.0.0/24 172.17.0.3
ip route 70.10.0.0/24 172.17.0.2
ip route 80.10.0.0/24 172.17.0.2
ip route 80.10.0.0/24 172.17.0.3
ip route 80.10.0.0/24 172.17.0.4
ip route 90.10.0.0/24 172.17.0.3
ip route 90.10.0.0/24 172.17.0.2
ip route 90.10.0.0/24 172.17.0.4
line vty
 exec-timeout 0 0
!